| Message ID | 20210701112803.75815-2-antoniu.miclaus@analog.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/2] iio: frequency: adrf6780: add support for ADRF6780 | expand |
On Thu, 01 Jul 2021 14:28:03 +0300, Antoniu Miclaus wrote: > Add device tree bindings for the ADRF6780 Upconverter. > > Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> > --- > v2: remove `det-en` and `parity-en` from device tree > .../bindings/iio/frequency/adi,adrf6780.yaml | 123 ++++++++++++++++++ > 1 file changed, 123 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml:10:1: [warning] wrong indentation: expected 2 but found 0 (indentation) ./Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml:101:1: [warning] wrong indentation: expected 2 but found 0 (indentation) ./Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml:109:1: [warning] wrong indentation: expected 2 but found 0 (indentation) dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.example.dt.yaml: adrf6780@0: 'adi,parity-en' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml \ndoc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1499502 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml new file mode 100644 index 000000000000..e6a104ac8794 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/frequency/adi,adrf6780.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADRF6780 Microwave Upconverter + +maintainers: +- Antoniu Miclaus <antoniu.miclaus@analog.com> + +description: | + wideband, microwave upconverter optimized for point to point microwave + radio designs operating in the 5.9 GHz to 23.6 GHz frequency range. + https://www.analog.com/en/products/adrf6780.html + +properties: + compatible: + enum: + - adi,adrf6780 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 1000000 + + clocks: + description: + Definition of the external clock (see clock/clock-bindings.txt) + minItems: 1 + + clock-names: + description: + Must be "lo_in" + maxItems: 1 + + clock-output-names: + maxItems: 1 + + adi,vga-buff-en: + description: + VGA Buffer Enable. + type: boolean + + adi,lo-buff-en: + description: + LO Buffer Enable. + type: boolean + + adi,if-mode-en: + description: + IF Mode Enable. + type: boolean + + adi,iq-mode-en: + description: + IQ Mode Enable. + type: boolean + + adi,lo-x2-en: + description: + LO x2 Enable. + type: boolean + + adi,lo-ppf-en: + description: + LO x1 Enable. + type: boolean + + adi,lo-en: + description: + LO Enable. + type: boolean + + adi,uc-bias-en: + description: + UC Bias Enable. + type: boolean + + adi,lo-sideband: + description: + Switch to the Other LO Sideband. + type: boolean + + adi,vdet-out-en: + description: + VDET Output Select Enable. + type: boolean + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#clock-cells': + const: 0 + +required: +- compatible +- reg +- clocks +- clock-names + +additionalProperties: false + +examples: +- | + spi { + #address-cells = <1>; + #size-cells = <0>; + adrf6780@0{ + compatible = "adi,adrf6780"; + reg = <0>; + spi-max-frequency = <1000000>; + clocks = <&adrf6780_lo>; + clock-names = "lo_in"; + adi,parity-en; + }; + }; +... +
Add device tree bindings for the ADRF6780 Upconverter. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> --- v2: remove `det-en` and `parity-en` from device tree .../bindings/iio/frequency/adi,adrf6780.yaml | 123 ++++++++++++++++++ 1 file changed, 123 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml