| Message ID | 20210705124206.1228958-2-chenhuacai@loongson.cn (mailing list archive) |
|---|---|
| State | Mainlined, archived |
| Headers | show |
| Series | ACPI: Add LoongArch-related definitions | expand |
On Mon, Jul 5, 2021 at 2:41 PM Huacai Chen <chenhuacai@loongson.cn> wrote: > > We are preparing to add new Loongson (based on LoongArch, not MIPS) > support. LoongArch use ACPI other than DT as its boot protocol, so > add its support for ACPI_PROCESSOR/ACPI_NUMA. > > Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> > --- > drivers/acpi/Kconfig | 4 ++-- > drivers/acpi/numa/Kconfig | 2 +- > drivers/acpi/numa/srat.c | 2 +- > include/linux/acpi.h | 2 +- > 4 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > index fe0bb6277e4d..90afa44efcba 100644 > --- a/drivers/acpi/Kconfig > +++ b/drivers/acpi/Kconfig > @@ -280,9 +280,9 @@ config ACPI_CPPC_LIB > > config ACPI_PROCESSOR > tristate "Processor" > - depends on X86 || IA64 || ARM64 > + depends on X86 || IA64 || ARM64 || LOONGARCH > select ACPI_PROCESSOR_IDLE > - select ACPI_CPU_FREQ_PSS if X86 || IA64 > + select ACPI_CPU_FREQ_PSS if X86 || IA64 || LOONGARCH > default y > help > This driver adds support for the ACPI Processor package. It is required > diff --git a/drivers/acpi/numa/Kconfig b/drivers/acpi/numa/Kconfig > index fcf2e556d69d..39b1f34c21df 100644 > --- a/drivers/acpi/numa/Kconfig > +++ b/drivers/acpi/numa/Kconfig > @@ -2,7 +2,7 @@ > config ACPI_NUMA > bool "NUMA support" > depends on NUMA > - depends on (X86 || IA64 || ARM64) > + depends on (X86 || IA64 || ARM64 || LOONGARCH) > default y if IA64 || ARM64 > > config ACPI_HMAT > diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c > index 6021a1013442..b8795fc49097 100644 > --- a/drivers/acpi/numa/srat.c > +++ b/drivers/acpi/numa/srat.c > @@ -206,7 +206,7 @@ int __init srat_disabled(void) > return acpi_numa < 0; > } > > -#if defined(CONFIG_X86) || defined(CONFIG_ARM64) > +#if defined(CONFIG_X86) || defined(CONFIG_ARM64) || defined(CONFIG_LOONGARCH) > /* > * Callback for SLIT parsing. pxm_to_node() returns NUMA_NO_NODE for > * I/O localities since SRAT does not list them. I/O localities are > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > index 6bb36fd6ba31..3ba8511cbede 100644 > --- a/include/linux/acpi.h > +++ b/include/linux/acpi.h > @@ -249,7 +249,7 @@ void acpi_table_print_madt_entry (struct acpi_subtable_header *madt); > /* the following numa functions are architecture-dependent */ > void acpi_numa_slit_init (struct acpi_table_slit *slit); > > -#if defined(CONFIG_X86) || defined(CONFIG_IA64) > +#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_LOONGARCH) > void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa); > #else > static inline void > -- Does this patch alone make sense without the other two in the series? If so, I can queue it up for 5.15, so please let me know. Thanks!
Hi, Rafael, > -----原始邮件----- > 发件人: "Rafael J. Wysocki" <rafael@kernel.org> > 发送时间: 2021-07-14 20:30:33 (星期三) > 收件人: "Huacai Chen" <chenhuacai@loongson.cn> > 抄送: "Rafael J . Wysocki" <rjw@rjwysocki.net>, "Len Brown" <lenb@kernel.org>, "Robert Moore" <robert.moore@intel.com>, "Erik Kaneda" <erik.kaneda@intel.com>, "ACPI Devel Maling List" <linux-acpi@vger.kernel.org>, "open list:ACPI COMPONENT ARCHITECTURE (ACPICA)" <devel@acpica.org>, "Xuefeng Li" <lixuefeng@loongson.cn>, "Jiaxun Yang" <jiaxun.yang@flygoat.com> > 主题: Re: [PATCH 1/3] ACPI: Add LoongArch support for ACPI_PROCESSOR/ACPI_NUMA > > On Mon, Jul 5, 2021 at 2:41 PM Huacai Chen <chenhuacai@loongson.cn> wrote: > > > > We are preparing to add new Loongson (based on LoongArch, not MIPS) > > support. LoongArch use ACPI other than DT as its boot protocol, so > > add its support for ACPI_PROCESSOR/ACPI_NUMA. > > > > Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> > > --- > > drivers/acpi/Kconfig | 4 ++-- > > drivers/acpi/numa/Kconfig | 2 +- > > drivers/acpi/numa/srat.c | 2 +- > > include/linux/acpi.h | 2 +- > > 4 files changed, 5 insertions(+), 5 deletions(-) > > > > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > > index fe0bb6277e4d..90afa44efcba 100644 > > --- a/drivers/acpi/Kconfig > > +++ b/drivers/acpi/Kconfig > > @@ -280,9 +280,9 @@ config ACPI_CPPC_LIB > > > > config ACPI_PROCESSOR > > tristate "Processor" > > - depends on X86 || IA64 || ARM64 > > + depends on X86 || IA64 || ARM64 || LOONGARCH > > select ACPI_PROCESSOR_IDLE > > - select ACPI_CPU_FREQ_PSS if X86 || IA64 > > + select ACPI_CPU_FREQ_PSS if X86 || IA64 || LOONGARCH > > default y > > help > > This driver adds support for the ACPI Processor package. It is required > > diff --git a/drivers/acpi/numa/Kconfig b/drivers/acpi/numa/Kconfig > > index fcf2e556d69d..39b1f34c21df 100644 > > --- a/drivers/acpi/numa/Kconfig > > +++ b/drivers/acpi/numa/Kconfig > > @@ -2,7 +2,7 @@ > > config ACPI_NUMA > > bool "NUMA support" > > depends on NUMA > > - depends on (X86 || IA64 || ARM64) > > + depends on (X86 || IA64 || ARM64 || LOONGARCH) > > default y if IA64 || ARM64 > > > > config ACPI_HMAT > > diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c > > index 6021a1013442..b8795fc49097 100644 > > --- a/drivers/acpi/numa/srat.c > > +++ b/drivers/acpi/numa/srat.c > > @@ -206,7 +206,7 @@ int __init srat_disabled(void) > > return acpi_numa < 0; > > } > > > > -#if defined(CONFIG_X86) || defined(CONFIG_ARM64) > > +#if defined(CONFIG_X86) || defined(CONFIG_ARM64) || defined(CONFIG_LOONGARCH) > > /* > > * Callback for SLIT parsing. pxm_to_node() returns NUMA_NO_NODE for > > * I/O localities since SRAT does not list them. I/O localities are > > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > > index 6bb36fd6ba31..3ba8511cbede 100644 > > --- a/include/linux/acpi.h > > +++ b/include/linux/acpi.h > > @@ -249,7 +249,7 @@ void acpi_table_print_madt_entry (struct acpi_subtable_header *madt); > > /* the following numa functions are architecture-dependent */ > > void acpi_numa_slit_init (struct acpi_table_slit *slit); > > > > -#if defined(CONFIG_X86) || defined(CONFIG_IA64) > > +#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_LOONGARCH) > > void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa); > > #else > > static inline void > > -- > > Does this patch alone make sense without the other two in the series? > If so, I can queue it up for 5.15, so please let me know. Yes, this patch has no dependency with other two. Huacai > > Thanks! </chenhuacai@loongson.cn></chenhuacai@loongson.cn></jiaxun.yang@flygoat.com></lixuefeng@loongson.cn></devel@acpica.org></linux-acpi@vger.kernel.org></erik.kaneda@intel.com></robert.moore@intel.com></lenb@kernel.org></rjw@rjwysocki.net></chenhuacai@loongson.cn></rafael@kernel.org>
On Thu, Jul 15, 2021 at 6:49 AM 陈华才 <chenhuacai@loongson.cn> wrote: > > Hi, Rafael, > > > > -----原始邮件----- > > 发件人: "Rafael J. Wysocki" <rafael@kernel.org> > > 发送时间: 2021-07-14 20:30:33 (星期三) > > 收件人: "Huacai Chen" <chenhuacai@loongson.cn> > > 抄送: "Rafael J . Wysocki" <rjw@rjwysocki.net>, "Len Brown" <lenb@kernel.org>, "Robert Moore" <robert.moore@intel.com>, "Erik Kaneda" <erik.kaneda@intel.com>, "ACPI Devel Maling List" <linux-acpi@vger.kernel.org>, "open list:ACPI COMPONENT ARCHITECTURE (ACPICA)" <devel@acpica.org>, "Xuefeng Li" <lixuefeng@loongson.cn>, "Jiaxun Yang" <jiaxun.yang@flygoat.com> > > 主题: Re: [PATCH 1/3] ACPI: Add LoongArch support for ACPI_PROCESSOR/ACPI_NUMA > > > > On Mon, Jul 5, 2021 at 2:41 PM Huacai Chen <chenhuacai@loongson.cn> wrote: > > > > > > We are preparing to add new Loongson (based on LoongArch, not MIPS) > > > support. LoongArch use ACPI other than DT as its boot protocol, so > > > add its support for ACPI_PROCESSOR/ACPI_NUMA. > > > > > > Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> > > > --- > > > drivers/acpi/Kconfig | 4 ++-- > > > drivers/acpi/numa/Kconfig | 2 +- > > > drivers/acpi/numa/srat.c | 2 +- > > > include/linux/acpi.h | 2 +- > > > 4 files changed, 5 insertions(+), 5 deletions(-) > > > > > > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > > > index fe0bb6277e4d..90afa44efcba 100644 > > > --- a/drivers/acpi/Kconfig > > > +++ b/drivers/acpi/Kconfig > > > @@ -280,9 +280,9 @@ config ACPI_CPPC_LIB > > > > > > config ACPI_PROCESSOR > > > tristate "Processor" > > > - depends on X86 || IA64 || ARM64 > > > + depends on X86 || IA64 || ARM64 || LOONGARCH > > > select ACPI_PROCESSOR_IDLE > > > - select ACPI_CPU_FREQ_PSS if X86 || IA64 > > > + select ACPI_CPU_FREQ_PSS if X86 || IA64 || LOONGARCH > > > default y > > > help > > > This driver adds support for the ACPI Processor package. It is required > > > diff --git a/drivers/acpi/numa/Kconfig b/drivers/acpi/numa/Kconfig > > > index fcf2e556d69d..39b1f34c21df 100644 > > > --- a/drivers/acpi/numa/Kconfig > > > +++ b/drivers/acpi/numa/Kconfig > > > @@ -2,7 +2,7 @@ > > > config ACPI_NUMA > > > bool "NUMA support" > > > depends on NUMA > > > - depends on (X86 || IA64 || ARM64) > > > + depends on (X86 || IA64 || ARM64 || LOONGARCH) > > > default y if IA64 || ARM64 > > > > > > config ACPI_HMAT > > > diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c > > > index 6021a1013442..b8795fc49097 100644 > > > --- a/drivers/acpi/numa/srat.c > > > +++ b/drivers/acpi/numa/srat.c > > > @@ -206,7 +206,7 @@ int __init srat_disabled(void) > > > return acpi_numa < 0; > > > } > > > > > > -#if defined(CONFIG_X86) || defined(CONFIG_ARM64) > > > +#if defined(CONFIG_X86) || defined(CONFIG_ARM64) || defined(CONFIG_LOONGARCH) > > > /* > > > * Callback for SLIT parsing. pxm_to_node() returns NUMA_NO_NODE for > > > * I/O localities since SRAT does not list them. I/O localities are > > > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > > > index 6bb36fd6ba31..3ba8511cbede 100644 > > > --- a/include/linux/acpi.h > > > +++ b/include/linux/acpi.h > > > @@ -249,7 +249,7 @@ void acpi_table_print_madt_entry (struct acpi_subtable_header *madt); > > > /* the following numa functions are architecture-dependent */ > > > void acpi_numa_slit_init (struct acpi_table_slit *slit); > > > > > > -#if defined(CONFIG_X86) || defined(CONFIG_IA64) > > > +#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_LOONGARCH) > > > void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa); > > > #else > > > static inline void > > > -- > > > > Does this patch alone make sense without the other two in the series? > > If so, I can queue it up for 5.15, so please let me know. > Yes, this patch has no dependency with other two. OK, applied as 5.15 material. Thanks!
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index fe0bb6277e4d..90afa44efcba 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -280,9 +280,9 @@ config ACPI_CPPC_LIB config ACPI_PROCESSOR tristate "Processor" - depends on X86 || IA64 || ARM64 + depends on X86 || IA64 || ARM64 || LOONGARCH select ACPI_PROCESSOR_IDLE - select ACPI_CPU_FREQ_PSS if X86 || IA64 + select ACPI_CPU_FREQ_PSS if X86 || IA64 || LOONGARCH default y help This driver adds support for the ACPI Processor package. It is required diff --git a/drivers/acpi/numa/Kconfig b/drivers/acpi/numa/Kconfig index fcf2e556d69d..39b1f34c21df 100644 --- a/drivers/acpi/numa/Kconfig +++ b/drivers/acpi/numa/Kconfig @@ -2,7 +2,7 @@ config ACPI_NUMA bool "NUMA support" depends on NUMA - depends on (X86 || IA64 || ARM64) + depends on (X86 || IA64 || ARM64 || LOONGARCH) default y if IA64 || ARM64 config ACPI_HMAT diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c index 6021a1013442..b8795fc49097 100644 --- a/drivers/acpi/numa/srat.c +++ b/drivers/acpi/numa/srat.c @@ -206,7 +206,7 @@ int __init srat_disabled(void) return acpi_numa < 0; } -#if defined(CONFIG_X86) || defined(CONFIG_ARM64) +#if defined(CONFIG_X86) || defined(CONFIG_ARM64) || defined(CONFIG_LOONGARCH) /* * Callback for SLIT parsing. pxm_to_node() returns NUMA_NO_NODE for * I/O localities since SRAT does not list them. I/O localities are diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 6bb36fd6ba31..3ba8511cbede 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -249,7 +249,7 @@ void acpi_table_print_madt_entry (struct acpi_subtable_header *madt); /* the following numa functions are architecture-dependent */ void acpi_numa_slit_init (struct acpi_table_slit *slit); -#if defined(CONFIG_X86) || defined(CONFIG_IA64) +#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_LOONGARCH) void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa); #else static inline void
We are preparing to add new Loongson (based on LoongArch, not MIPS) support. LoongArch use ACPI other than DT as its boot protocol, so add its support for ACPI_PROCESSOR/ACPI_NUMA. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> --- drivers/acpi/Kconfig | 4 ++-- drivers/acpi/numa/Kconfig | 2 +- drivers/acpi/numa/srat.c | 2 +- include/linux/acpi.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-)