| Message ID | 20210702225145.2643303-3-martin.blumenstingl@googlemail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | clk: switch dividers to .determine_rate | expand |
On 21-07-03 00:51:41, Martin Blumenstingl wrote: > .determine_rate is meant to replace .round_rate in CCF in the future. > Switch over to .determine_rate now that clk_divider_ops has gained > support for that. > > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Abel Vesa <abel.vesa@nxp.com> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Sascha Hauer <s.hauer@pengutronix.de> > Cc: Pengutronix Kernel Team <kernel@pengutronix.de> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: NXP Linux Team <linux-imx@nxp.com> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> > --- > drivers/clk/imx/clk-divider-gate.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/clk/imx/clk-divider-gate.c b/drivers/clk/imx/clk-divider-gate.c > index 0322a843d245..26b210cba9be 100644 > --- a/drivers/clk/imx/clk-divider-gate.c > +++ b/drivers/clk/imx/clk-divider-gate.c > @@ -64,10 +64,10 @@ static unsigned long clk_divider_gate_recalc_rate(struct clk_hw *hw, > div->flags, div->width); > } > > -static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate, > - unsigned long *prate) > +static int clk_divider_determine_rate(struct clk_hw *hw, > + struct clk_rate_request *req) > { > - return clk_divider_ops.round_rate(hw, rate, prate); > + return clk_divider_ops.determine_rate(hw, req); > } > > static int clk_divider_gate_set_rate(struct clk_hw *hw, unsigned long rate, > @@ -154,12 +154,12 @@ static int clk_divider_is_enabled(struct clk_hw *hw) > > static const struct clk_ops clk_divider_gate_ro_ops = { > .recalc_rate = clk_divider_gate_recalc_rate_ro, > - .round_rate = clk_divider_round_rate, > + .determine_rate = clk_divider_determine_rate, > }; > > static const struct clk_ops clk_divider_gate_ops = { > .recalc_rate = clk_divider_gate_recalc_rate, > - .round_rate = clk_divider_round_rate, > + .determine_rate = clk_divider_determine_rate, > .set_rate = clk_divider_gate_set_rate, > .enable = clk_divider_enable, > .disable = clk_divider_disable, > -- > 2.32.0 >
On 21-07-03 00:51:41, Martin Blumenstingl wrote: > .determine_rate is meant to replace .round_rate in CCF in the future. > Switch over to .determine_rate now that clk_divider_ops has gained > support for that. > > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Abel Vesa <abel.vesa@nxp.com> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Sascha Hauer <s.hauer@pengutronix.de> > Cc: Pengutronix Kernel Team <kernel@pengutronix.de> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: NXP Linux Team <linux-imx@nxp.com> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Applied this one. Thanks. > --- > drivers/clk/imx/clk-divider-gate.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/clk/imx/clk-divider-gate.c b/drivers/clk/imx/clk-divider-gate.c > index 0322a843d245..26b210cba9be 100644 > --- a/drivers/clk/imx/clk-divider-gate.c > +++ b/drivers/clk/imx/clk-divider-gate.c > @@ -64,10 +64,10 @@ static unsigned long clk_divider_gate_recalc_rate(struct clk_hw *hw, > div->flags, div->width); > } > > -static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate, > - unsigned long *prate) > +static int clk_divider_determine_rate(struct clk_hw *hw, > + struct clk_rate_request *req) > { > - return clk_divider_ops.round_rate(hw, rate, prate); > + return clk_divider_ops.determine_rate(hw, req); > } > > static int clk_divider_gate_set_rate(struct clk_hw *hw, unsigned long rate, > @@ -154,12 +154,12 @@ static int clk_divider_is_enabled(struct clk_hw *hw) > > static const struct clk_ops clk_divider_gate_ro_ops = { > .recalc_rate = clk_divider_gate_recalc_rate_ro, > - .round_rate = clk_divider_round_rate, > + .determine_rate = clk_divider_determine_rate, > }; > > static const struct clk_ops clk_divider_gate_ops = { > .recalc_rate = clk_divider_gate_recalc_rate, > - .round_rate = clk_divider_round_rate, > + .determine_rate = clk_divider_determine_rate, > .set_rate = clk_divider_gate_set_rate, > .enable = clk_divider_enable, > .disable = clk_divider_disable, > -- > 2.32.0 >
diff --git a/drivers/clk/imx/clk-divider-gate.c b/drivers/clk/imx/clk-divider-gate.c index 0322a843d245..26b210cba9be 100644 --- a/drivers/clk/imx/clk-divider-gate.c +++ b/drivers/clk/imx/clk-divider-gate.c @@ -64,10 +64,10 @@ static unsigned long clk_divider_gate_recalc_rate(struct clk_hw *hw, div->flags, div->width); } -static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) +static int clk_divider_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) { - return clk_divider_ops.round_rate(hw, rate, prate); + return clk_divider_ops.determine_rate(hw, req); } static int clk_divider_gate_set_rate(struct clk_hw *hw, unsigned long rate, @@ -154,12 +154,12 @@ static int clk_divider_is_enabled(struct clk_hw *hw) static const struct clk_ops clk_divider_gate_ro_ops = { .recalc_rate = clk_divider_gate_recalc_rate_ro, - .round_rate = clk_divider_round_rate, + .determine_rate = clk_divider_determine_rate, }; static const struct clk_ops clk_divider_gate_ops = { .recalc_rate = clk_divider_gate_recalc_rate, - .round_rate = clk_divider_round_rate, + .determine_rate = clk_divider_determine_rate, .set_rate = clk_divider_gate_set_rate, .enable = clk_divider_enable, .disable = clk_divider_disable,
.determine_rate is meant to replace .round_rate in CCF in the future. Switch over to .determine_rate now that clk_divider_ops has gained support for that. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Abel Vesa <abel.vesa@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- drivers/clk/imx/clk-divider-gate.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)