[v6,5/9] dt-bindings: phy: Add bindings for HiKey 970 PCIe PHY

Commit Message

Mauro Carvalho Chehab July 20, 2021, 8:09 a.m. UTC

Document the bindings for HiKey 970 (hi3670) PCIe PHY
interface, supported via the pcie-kirin driver.

Signed-off-by: Mauro Carvalho Chehab <[e-mail]>
---
 .../phy/hisilicon,phy-hi3670-pcie.yaml        | 98 +++++++++++++++++++
 1 file changed, 98 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml

Comments

Rob Herring July 20, 2021, 1:11 p.m. UTC | #1

On Tue, 20 Jul 2021 10:09:07 +0200, Mauro Carvalho Chehab wrote:
> Document the bindings for HiKey 970 (hi3670) PCIe PHY
> interface, supported via the pcie-kirin driver.
> 
> Signed-off-by: Mauro Carvalho Chehab <[e-mail]>
> ---
>  .../phy/hisilicon,phy-hi3670-pcie.yaml        | 98 +++++++++++++++++++
>  1 file changed, 98 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.example.dt.yaml: pcie-phy@fc000000: 'reg-names' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1507427

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Patch

diff --git a/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml b/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
new file mode 100644
index 000000000000..f88b6b7496bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
@@ -0,0 +1,98 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,phy-hi3670-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Kirin970 PCIe PHY
+
+maintainers:
+  - Mauro Carvalho Chehab <[e-mail]>
+
+description: |+
+  Bindings for PCIe PHY on HiSilicon Kirin 970.
+
+properties:
+  compatible:
+    const: hisilicon,hi970-pcie-phy
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+    description: PHY Control registers
+
+  phy-supply:
+    description: The PCIe PHY power supply
+
+  clocks:
+    items:
+      - description: PCIe PHY clock
+      - description: PCIe AUX clock
+      - description: PCIe APB PHY clock
+      - description: PCIe APB SYS clock
+      - description: PCIe ACLK clock
+
+  clock-names:
+    items:
+      - const: phy_ref
+      - const: aux
+      - const: apb_phy
+      - const: apb_sys
+      - const: aclk
+
+  reset-gpios:
+    description: PCI PERST reset GPIOs
+    maxItems: 4
+
+  clkreq-gpios:
+    description: Clock request GPIOs
+    maxItems: 3
+
+  hisilicon,eye-diagram-param:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Eye diagram for phy.
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - reset-gpios
+  - clkreq-gpios
+  - hisilicon,eye-diagram-param
+  - phy-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/hi3670-clock.h>
+
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      pcie_phy: pcie-phy@fc000000 {
+        compatible = "hisilicon,hi970-pcie-phy";
+        reg = <0x0 0xfc000000 0x0 0x80000>;
+        reg-names = "phy";
+        #phy-cells = <0>;
+        phy-supply = <&ldo33>;
+        clocks = <&crg_ctrl HI3670_CLK_GATE_PCIEPHY_REF>,
+                 <&crg_ctrl HI3670_CLK_GATE_PCIEAUX>,
+                 <&crg_ctrl HI3670_PCLK_GATE_PCIE_PHY>,
+                 <&crg_ctrl HI3670_PCLK_GATE_PCIE_SYS>,
+                 <&crg_ctrl HI3670_ACLK_GATE_PCIE>;
+        clock-names = "phy_ref", "aux",
+                      "apb_phy", "apb_sys", "aclk";
+        reset-gpios = <&gpio7 0 0 >, <&gpio25 2 0 >,
+                      <&gpio3 1 0 >, <&gpio27 4 0 >;
+        clkreq-gpios = <&gpio20 6 0 >, <&gpio27 3 0 >, <&gpio17 0 0 >;
+        hisilicon,eye-diagram-param = <0xFFFFFFFF 0xFFFFFFFF
+                                       0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF>;
+      };
+    };
+...