| Message ID | 20210720205009.111806-2-nirmal.patel@linux.intel.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Lorenzo Pieralisi |
| Headers | show |
| Series | Issue secondary bus reset and domain window reset | expand |
On Tue, Jul 20, 2021 at 01:50:08PM -0700, Nirmal Patel wrote: > During VT-d passthrough repetitive reboot tests, it was determined that the VMD > domain needed to be reset in order to allow downstream devices to reinitialize > properly. This is done using a secondary bus reset at each of the VMD root > ports and any bridges in the domain. I don't understand the "any bridges in the domain" part. Clearly you only reset Intel bridges, and only those on a single "bus". So can there be both VMD root ports and another kind of bridge on the same bus? Rewrap this to fit in 75 columns or so, so it doesn't overflow 80 column lines when git log indents it by 4. > Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> > Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> > --- > drivers/pci/controller/vmd.c | 46 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 46 insertions(+) > > diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c > index e3fcdfec58b3..6e1c60048774 100644 > --- a/drivers/pci/controller/vmd.c > +++ b/drivers/pci/controller/vmd.c > @@ -15,6 +15,7 @@ > #include <linux/srcu.h> > #include <linux/rculist.h> > #include <linux/rcupdate.h> > +#include <linux/delay.h> > > #include <asm/irqdomain.h> > #include <asm/device.h> > @@ -447,6 +448,49 @@ static struct pci_ops vmd_ops = { > .write = vmd_pci_write, > }; > > +#define PCI_HEADER_TYPE_MASK 0x7f Already defined in include/uapi/linux/pci_regs.h. > +#define PCI_CLASS_BRIDGE_PCI 0x0604 Already defined in include/linux/pci_ids.h. What am I missing? Seems like you should see duplicate definition warnings. > +#define DEVICE_SPACE (8 * 4096) > +#define VMD_DEVICE_BASE(vmd, device) ((vmd)->cfgbar + (device) * DEVICE_SPACE) > +#define VMD_FUNCTION_BASE(vmd, device, fn) ((vmd)->cfgbar + (device) * (DEVICE_SPACE + (fn*4096))) Add blank line here. > +static void vmd_domain_sbr(struct vmd_dev *vmd) > +{ > + char __iomem *base; > + u16 ctl; > + int dev_seq; > + int max_devs = resource_size(&vmd->resources[0]) * 32; > + > + /* > + * Subdevice config space may or many not be mapped linearly using 4k config > + * space. Fix comment indentation. s/many/may/ I don't really understand the comment anyway. Is the point that subdevice config space may not be physically contiguous? Certainly VMD_DEVICE_BASE() computes virtual addresses that are linear. > + */ > + for (dev_seq = 0; dev_seq < max_devs; dev_seq++) { > + base = VMD_DEVICE_BASE(vmd, dev_seq); > + if (readw(base + PCI_VENDOR_ID) != PCI_VENDOR_ID_INTEL) > + continue; > + > + if ((readb(base + PCI_HEADER_TYPE) & PCI_HEADER_TYPE_MASK) != > + PCI_HEADER_TYPE_BRIDGE) > + continue; > + > + if (readw(base + PCI_CLASS_DEVICE) != PCI_CLASS_BRIDGE_PCI) > + continue; > + > + /* pci_reset_secondary_bus() */ > + ctl = readw(base + PCI_BRIDGE_CONTROL); > + ctl |= PCI_BRIDGE_CTL_BUS_RESET; > + writew(ctl, base + PCI_BRIDGE_CONTROL); > + readw(base + PCI_BRIDGE_CONTROL); > + msleep(2); It's a shame we can't do this with pci_reset_secondary_bus(). Makes me wonder if there's an opportunity for special pci_ops. > + ctl &= ~PCI_BRIDGE_CTL_BUS_RESET; > + writew(ctl, base + PCI_BRIDGE_CONTROL); > + readw(base + PCI_BRIDGE_CONTROL); > + > + } > + ssleep(1); > +} > + > static void vmd_attach_resources(struct vmd_dev *vmd) > { > vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1]; > @@ -747,6 +791,8 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) > if (vmd->irq_domain) > dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain); > > + vmd_domain_sbr(vmd); > + > pci_scan_child_bus(vmd->bus); > pci_assign_unassigned_bus_resources(vmd->bus); > > -- > 2.27.0 >
On Tue, Jul 20, 2021 at 01:50:08PM -0700, Nirmal Patel wrote: > +#define PCI_HEADER_TYPE_MASK 0x7f > +#define PCI_CLASS_BRIDGE_PCI 0x0604 Please use the existing definitions from pci_regs.h / pci_ids.h. > > +#define DEVICE_SPACE (8 * 4096) > +#define VMD_DEVICE_BASE(vmd, device) ((vmd)->cfgbar + (device) * DEVICE_SPACE) > +#define VMD_FUNCTION_BASE(vmd, device, fn) ((vmd)->cfgbar + (device) * (DEVICE_SPACE + (fn*4096))) Plase turn thos into readable inline functions and avoid the overly long lines. > + /* > + * Subdevice config space may or many not be mapped linearly using 4k config > + * space. > + */ Please avoid the overly long line, especially in a comment.
On Tuesday 20 July 2021 13:50:08 Nirmal Patel wrote: > During VT-d passthrough repetitive reboot tests, it was determined that the VMD > domain needed to be reset in order to allow downstream devices to reinitialize > properly. This is done using a secondary bus reset at each of the VMD root > ports and any bridges in the domain. > > Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> > Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> > --- > drivers/pci/controller/vmd.c | 46 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 46 insertions(+) > > diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c > index e3fcdfec58b3..6e1c60048774 100644 > --- a/drivers/pci/controller/vmd.c > +++ b/drivers/pci/controller/vmd.c > @@ -15,6 +15,7 @@ > #include <linux/srcu.h> > #include <linux/rculist.h> > #include <linux/rcupdate.h> > +#include <linux/delay.h> > > #include <asm/irqdomain.h> > #include <asm/device.h> > @@ -447,6 +448,49 @@ static struct pci_ops vmd_ops = { > .write = vmd_pci_write, > }; > > +#define PCI_HEADER_TYPE_MASK 0x7f > +#define PCI_CLASS_BRIDGE_PCI 0x0604 > +#define DEVICE_SPACE (8 * 4096) > +#define VMD_DEVICE_BASE(vmd, device) ((vmd)->cfgbar + (device) * DEVICE_SPACE) > +#define VMD_FUNCTION_BASE(vmd, device, fn) ((vmd)->cfgbar + (device) * (DEVICE_SPACE + (fn*4096))) > +static void vmd_domain_sbr(struct vmd_dev *vmd) > +{ > + char __iomem *base; > + u16 ctl; > + int dev_seq; > + int max_devs = resource_size(&vmd->resources[0]) * 32; > + > + /* > + * Subdevice config space may or many not be mapped linearly using 4k config > + * space. > + */ > + for (dev_seq = 0; dev_seq < max_devs; dev_seq++) { > + base = VMD_DEVICE_BASE(vmd, dev_seq); > + if (readw(base + PCI_VENDOR_ID) != PCI_VENDOR_ID_INTEL) > + continue; > + > + if ((readb(base + PCI_HEADER_TYPE) & PCI_HEADER_TYPE_MASK) != > + PCI_HEADER_TYPE_BRIDGE) > + continue; > + > + if (readw(base + PCI_CLASS_DEVICE) != PCI_CLASS_BRIDGE_PCI) > + continue; > + > + /* pci_reset_secondary_bus() */ > + ctl = readw(base + PCI_BRIDGE_CONTROL); > + ctl |= PCI_BRIDGE_CTL_BUS_RESET; > + writew(ctl, base + PCI_BRIDGE_CONTROL); > + readw(base + PCI_BRIDGE_CONTROL); > + msleep(2); > + > + ctl &= ~PCI_BRIDGE_CTL_BUS_RESET; > + writew(ctl, base + PCI_BRIDGE_CONTROL); > + readw(base + PCI_BRIDGE_CONTROL); Hello! You cannot unconditionally call secondary bus reset for arbitrary PCIe Bridge. Calling it breaks more PCIe devices behind bridge and pci_reset_secondary_bus() already handles it and skip reset if reset is causing issues. I would suggest to use pci_reset_secondary_bus() and extend it so you can call it also from your driver. > + } > + ssleep(1); > +} > + > static void vmd_attach_resources(struct vmd_dev *vmd) > { > vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1]; > @@ -747,6 +791,8 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) > if (vmd->irq_domain) > dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain); > > + vmd_domain_sbr(vmd); > + > pci_scan_child_bus(vmd->bus); > pci_assign_unassigned_bus_resources(vmd->bus); > > -- > 2.27.0 >
On 7/20/2021 3:33 PM, Bjorn Helgaas wrote: > On Tue, Jul 20, 2021 at 01:50:08PM -0700, Nirmal Patel wrote: >> During VT-d passthrough repetitive reboot tests, it was determined that the VMD >> domain needed to be reset in order to allow downstream devices to reinitialize >> properly. This is done using a secondary bus reset at each of the VMD root >> ports and any bridges in the domain. > I don't understand the "any bridges in the domain" part. Clearly you > only reset Intel bridges, and only those on a single "bus". So can > there be both VMD root ports and another kind of bridge on the same > bus? > > Rewrap this to fit in 75 columns or so, so it doesn't overflow 80 > column lines when git log indents it by 4. You are right on resetting only Intel bridges. I think I can reword the message like "This is done using setting secondary bus reset bit of each of the VMD root port and will propagate reset through downstream bridges." > >> Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> >> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> >> --- >> drivers/pci/controller/vmd.c | 46 ++++++++++++++++++++++++++++++++++++ >> 1 file changed, 46 insertions(+) >> >> diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c >> index e3fcdfec58b3..6e1c60048774 100644 >> --- a/drivers/pci/controller/vmd.c >> +++ b/drivers/pci/controller/vmd.c >> @@ -15,6 +15,7 @@ >> #include <linux/srcu.h> >> #include <linux/rculist.h> >> #include <linux/rcupdate.h> >> +#include <linux/delay.h> >> >> #include <asm/irqdomain.h> >> #include <asm/device.h> >> @@ -447,6 +448,49 @@ static struct pci_ops vmd_ops = { >> .write = vmd_pci_write, >> }; >> >> +#define PCI_HEADER_TYPE_MASK 0x7f > Already defined in include/uapi/linux/pci_regs.h. I will make the changes. > >> +#define PCI_CLASS_BRIDGE_PCI 0x0604 > Already defined in include/linux/pci_ids.h. What am I missing? Seems > like you should see duplicate definition warnings. I will make the changes. > >> +#define DEVICE_SPACE (8 * 4096) >> +#define VMD_DEVICE_BASE(vmd, device) ((vmd)->cfgbar + (device) * DEVICE_SPACE) >> +#define VMD_FUNCTION_BASE(vmd, device, fn) ((vmd)->cfgbar + (device) * (DEVICE_SPACE + (fn*4096))) > Add blank line here. Sure. > >> +static void vmd_domain_sbr(struct vmd_dev *vmd) >> +{ >> + char __iomem *base; >> + u16 ctl; >> + int dev_seq; >> + int max_devs = resource_size(&vmd->resources[0]) * 32; >> + >> + /* >> + * Subdevice config space may or many not be mapped linearly using 4k config >> + * space. > Fix comment indentation. > > s/many/may/ > > I don't really understand the comment anyway. Is the point that > subdevice config space may not be physically contiguous? Certainly > VMD_DEVICE_BASE() computes virtual addresses that are linear. I will remove this confusing comment for the sack of simplicity. > >> + */ >> + for (dev_seq = 0; dev_seq < max_devs; dev_seq++) { >> + base = VMD_DEVICE_BASE(vmd, dev_seq); >> + if (readw(base + PCI_VENDOR_ID) != PCI_VENDOR_ID_INTEL) >> + continue; >> + >> + if ((readb(base + PCI_HEADER_TYPE) & PCI_HEADER_TYPE_MASK) != >> + PCI_HEADER_TYPE_BRIDGE) >> + continue; >> + >> + if (readw(base + PCI_CLASS_DEVICE) != PCI_CLASS_BRIDGE_PCI) >> + continue; >> + >> + /* pci_reset_secondary_bus() */ >> + ctl = readw(base + PCI_BRIDGE_CONTROL); >> + ctl |= PCI_BRIDGE_CTL_BUS_RESET; >> + writew(ctl, base + PCI_BRIDGE_CONTROL); >> + readw(base + PCI_BRIDGE_CONTROL); >> + msleep(2); > It's a shame we can't do this with pci_reset_secondary_bus(). Makes > me wonder if there's an opportunity for special pci_ops. > >> + ctl &= ~PCI_BRIDGE_CTL_BUS_RESET; >> + writew(ctl, base + PCI_BRIDGE_CONTROL); >> + readw(base + PCI_BRIDGE_CONTROL); >> + >> + } >> + ssleep(1); >> +} >> + >> static void vmd_attach_resources(struct vmd_dev *vmd) >> { >> vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1]; >> @@ -747,6 +791,8 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) >> if (vmd->irq_domain) >> dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain); >> >> + vmd_domain_sbr(vmd); >> + >> pci_scan_child_bus(vmd->bus); >> pci_assign_unassigned_bus_resources(vmd->bus); >> >> -- >> 2.27.0 >>
On 7/21/2021 1:50 AM, Pali Rohár wrote: > On Tuesday 20 July 2021 13:50:08 Nirmal Patel wrote: >> During VT-d passthrough repetitive reboot tests, it was determined that the VMD >> domain needed to be reset in order to allow downstream devices to reinitialize >> properly. This is done using a secondary bus reset at each of the VMD root >> ports and any bridges in the domain. >> >> Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> >> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> >> --- >> drivers/pci/controller/vmd.c | 46 ++++++++++++++++++++++++++++++++++++ >> 1 file changed, 46 insertions(+) >> >> diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c >> index e3fcdfec58b3..6e1c60048774 100644 >> --- a/drivers/pci/controller/vmd.c >> +++ b/drivers/pci/controller/vmd.c >> @@ -15,6 +15,7 @@ >> #include <linux/srcu.h> >> #include <linux/rculist.h> >> #include <linux/rcupdate.h> >> +#include <linux/delay.h> >> >> #include <asm/irqdomain.h> >> #include <asm/device.h> >> @@ -447,6 +448,49 @@ static struct pci_ops vmd_ops = { >> .write = vmd_pci_write, >> }; >> >> +#define PCI_HEADER_TYPE_MASK 0x7f >> +#define PCI_CLASS_BRIDGE_PCI 0x0604 >> +#define DEVICE_SPACE (8 * 4096) >> +#define VMD_DEVICE_BASE(vmd, device) ((vmd)->cfgbar + (device) * DEVICE_SPACE) >> +#define VMD_FUNCTION_BASE(vmd, device, fn) ((vmd)->cfgbar + (device) * (DEVICE_SPACE + (fn*4096))) >> +static void vmd_domain_sbr(struct vmd_dev *vmd) >> +{ >> + char __iomem *base; >> + u16 ctl; >> + int dev_seq; >> + int max_devs = resource_size(&vmd->resources[0]) * 32; >> + >> + /* >> + * Subdevice config space may or many not be mapped linearly using 4k config >> + * space. >> + */ >> + for (dev_seq = 0; dev_seq < max_devs; dev_seq++) { >> + base = VMD_DEVICE_BASE(vmd, dev_seq); >> + if (readw(base + PCI_VENDOR_ID) != PCI_VENDOR_ID_INTEL) >> + continue; >> + >> + if ((readb(base + PCI_HEADER_TYPE) & PCI_HEADER_TYPE_MASK) != >> + PCI_HEADER_TYPE_BRIDGE) >> + continue; >> + >> + if (readw(base + PCI_CLASS_DEVICE) != PCI_CLASS_BRIDGE_PCI) >> + continue; >> + >> + /* pci_reset_secondary_bus() */ >> + ctl = readw(base + PCI_BRIDGE_CONTROL); >> + ctl |= PCI_BRIDGE_CTL_BUS_RESET; >> + writew(ctl, base + PCI_BRIDGE_CONTROL); >> + readw(base + PCI_BRIDGE_CONTROL); >> + msleep(2); >> + >> + ctl &= ~PCI_BRIDGE_CTL_BUS_RESET; >> + writew(ctl, base + PCI_BRIDGE_CONTROL); >> + readw(base + PCI_BRIDGE_CONTROL); > Hello! > > You cannot unconditionally call secondary bus reset for arbitrary PCIe > Bridge. Calling it breaks more PCIe devices behind bridge and > pci_reset_secondary_bus() already handles it and skip reset if reset is > causing issues. > > I would suggest to use pci_reset_secondary_bus() and extend it > so you can call it also from your driver. Secondary bus reset is only performed on Intel VMD root ports prior to the VMD domain PCI enumerations. > >> + } >> + ssleep(1); >> +} >> + >> static void vmd_attach_resources(struct vmd_dev *vmd) >> { >> vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1]; >> @@ -747,6 +791,8 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) >> if (vmd->irq_domain) >> dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain); >> >> + vmd_domain_sbr(vmd); >> + >> pci_scan_child_bus(vmd->bus); >> pci_assign_unassigned_bus_resources(vmd->bus); >> >> -- >> 2.27.0 >>
On 7/20/2021 10:45 PM, Christoph Hellwig wrote: > On Tue, Jul 20, 2021 at 01:50:08PM -0700, Nirmal Patel wrote: >> +#define PCI_HEADER_TYPE_MASK 0x7f >> +#define PCI_CLASS_BRIDGE_PCI 0x0604 > Please use the existing definitions from pci_regs.h / pci_ids.h. Sure. > >> +#define DEVICE_SPACE (8 * 4096) >> +#define VMD_DEVICE_BASE(vmd, device) ((vmd)->cfgbar + (device) * DEVICE_SPACE) >> +#define VMD_FUNCTION_BASE(vmd, device, fn) ((vmd)->cfgbar + (device) * (DEVICE_SPACE + (fn*4096))) > Plase turn thos into readable inline functions and avoid the overly long > lines. Sure. > >> + /* >> + * Subdevice config space may or many not be mapped linearly using 4k config >> + * space. >> + */ > Please avoid the overly long line, especially in a comment. It is better to remove this confusing comment.
On Wed, Jul 21, 2021 at 10:50:26AM +0200, Pali Rohár wrote: > On Tuesday 20 July 2021 13:50:08 Nirmal Patel wrote: > > During VT-d passthrough repetitive reboot tests, it was determined that the VMD > > domain needed to be reset in order to allow downstream devices to reinitialize > > properly. This is done using a secondary bus reset at each of the VMD root > > ports and any bridges in the domain. > > > > Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> > > Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> > > --- > > drivers/pci/controller/vmd.c | 46 ++++++++++++++++++++++++++++++++++++ > > +static void vmd_domain_sbr(struct vmd_dev *vmd) > > +{ > > + char __iomem *base; > > + u16 ctl; > > + int dev_seq; > > + int max_devs = resource_size(&vmd->resources[0]) * 32; > > + > > + /* > > + * Subdevice config space may or many not be mapped linearly using 4k config > > + * space. > > + */ > > + for (dev_seq = 0; dev_seq < max_devs; dev_seq++) { > > + base = VMD_DEVICE_BASE(vmd, dev_seq); > > + if (readw(base + PCI_VENDOR_ID) != PCI_VENDOR_ID_INTEL) > > + continue; > > + > > + if ((readb(base + PCI_HEADER_TYPE) & PCI_HEADER_TYPE_MASK) != > > + PCI_HEADER_TYPE_BRIDGE) > > + continue; > > + > > + if (readw(base + PCI_CLASS_DEVICE) != PCI_CLASS_BRIDGE_PCI) > > + continue; > > + > > + /* pci_reset_secondary_bus() */ > > + ctl = readw(base + PCI_BRIDGE_CONTROL); > > + ctl |= PCI_BRIDGE_CTL_BUS_RESET; > > + writew(ctl, base + PCI_BRIDGE_CONTROL); > > + readw(base + PCI_BRIDGE_CONTROL); > > + msleep(2); > > + > > + ctl &= ~PCI_BRIDGE_CTL_BUS_RESET; > > + writew(ctl, base + PCI_BRIDGE_CONTROL); > > + readw(base + PCI_BRIDGE_CONTROL); > > You cannot unconditionally call secondary bus reset for arbitrary PCIe > Bridge. Calling it breaks more PCIe devices behind bridge and > pci_reset_secondary_bus() already handles it and skip reset if reset is > causing issues. > > I would suggest to use pci_reset_secondary_bus() and extend it > so you can call it also from your driver. Are you referring to PCI_DEV_FLAGS_NO_BUS_RESET? That's handled in pci_parent_bus_reset(), not pci_reset_secondary_bus(). I would probably agree that PCI_DEV_FLAGS_NO_BUS_RESET *should* be checked in pci_reset_secondary_bus(), since there are several paths to get there without going through pci_parent_bus_reset(). > > + } > > + ssleep(1); > > +}
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c index e3fcdfec58b3..6e1c60048774 100644 --- a/drivers/pci/controller/vmd.c +++ b/drivers/pci/controller/vmd.c @@ -15,6 +15,7 @@ #include <linux/srcu.h> #include <linux/rculist.h> #include <linux/rcupdate.h> +#include <linux/delay.h> #include <asm/irqdomain.h> #include <asm/device.h> @@ -447,6 +448,49 @@ static struct pci_ops vmd_ops = { .write = vmd_pci_write, }; +#define PCI_HEADER_TYPE_MASK 0x7f +#define PCI_CLASS_BRIDGE_PCI 0x0604 +#define DEVICE_SPACE (8 * 4096) +#define VMD_DEVICE_BASE(vmd, device) ((vmd)->cfgbar + (device) * DEVICE_SPACE) +#define VMD_FUNCTION_BASE(vmd, device, fn) ((vmd)->cfgbar + (device) * (DEVICE_SPACE + (fn*4096))) +static void vmd_domain_sbr(struct vmd_dev *vmd) +{ + char __iomem *base; + u16 ctl; + int dev_seq; + int max_devs = resource_size(&vmd->resources[0]) * 32; + + /* + * Subdevice config space may or many not be mapped linearly using 4k config + * space. + */ + for (dev_seq = 0; dev_seq < max_devs; dev_seq++) { + base = VMD_DEVICE_BASE(vmd, dev_seq); + if (readw(base + PCI_VENDOR_ID) != PCI_VENDOR_ID_INTEL) + continue; + + if ((readb(base + PCI_HEADER_TYPE) & PCI_HEADER_TYPE_MASK) != + PCI_HEADER_TYPE_BRIDGE) + continue; + + if (readw(base + PCI_CLASS_DEVICE) != PCI_CLASS_BRIDGE_PCI) + continue; + + /* pci_reset_secondary_bus() */ + ctl = readw(base + PCI_BRIDGE_CONTROL); + ctl |= PCI_BRIDGE_CTL_BUS_RESET; + writew(ctl, base + PCI_BRIDGE_CONTROL); + readw(base + PCI_BRIDGE_CONTROL); + msleep(2); + + ctl &= ~PCI_BRIDGE_CTL_BUS_RESET; + writew(ctl, base + PCI_BRIDGE_CONTROL); + readw(base + PCI_BRIDGE_CONTROL); + + } + ssleep(1); +} + static void vmd_attach_resources(struct vmd_dev *vmd) { vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1]; @@ -747,6 +791,8 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) if (vmd->irq_domain) dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain); + vmd_domain_sbr(vmd); + pci_scan_child_bus(vmd->bus); pci_assign_unassigned_bus_resources(vmd->bus);