| Message ID | 20210712073220.200414-1-cyrozap@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3] Bluetooth: btusb: Add support for LG LGSBWAC92/TWCM-K505D | expand |
This is automated email and please do not reply to this email! Dear submitter, Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series: PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=513851 ---Test result--- Test Summary: CheckPatch PASS 0.69 seconds GitLint PASS 0.13 seconds BuildKernel PASS 677.06 seconds TestRunner: Setup PASS 434.70 seconds TestRunner: l2cap-tester PASS 3.24 seconds TestRunner: bnep-tester PASS 2.22 seconds TestRunner: mgmt-tester PASS 34.92 seconds TestRunner: rfcomm-tester PASS 2.49 seconds TestRunner: sco-tester PASS 2.39 seconds TestRunner: smp-tester FAIL 2.45 seconds TestRunner: userchan-tester PASS 2.29 seconds Details ############################## Test: CheckPatch - PASS - 0.69 seconds Run checkpatch.pl script with rule in .checkpatch.conf ############################## Test: GitLint - PASS - 0.13 seconds Run gitlint with rule in .gitlint ############################## Test: BuildKernel - PASS - 677.06 seconds Build Kernel with minimal configuration supports Bluetooth ############################## Test: TestRunner: Setup - PASS - 434.70 seconds Setup environment for running Test Runner ############################## Test: TestRunner: l2cap-tester - PASS - 3.24 seconds Run test-runner with l2cap-tester Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0 ############################## Test: TestRunner: bnep-tester - PASS - 2.22 seconds Run test-runner with bnep-tester Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0 ############################## Test: TestRunner: mgmt-tester - PASS - 34.92 seconds Run test-runner with mgmt-tester Total: 446, Passed: 443 (99.3%), Failed: 0, Not Run: 3 ############################## Test: TestRunner: rfcomm-tester - PASS - 2.49 seconds Run test-runner with rfcomm-tester Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0 ############################## Test: TestRunner: sco-tester - PASS - 2.39 seconds Run test-runner with sco-tester Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0 ############################## Test: TestRunner: smp-tester - FAIL - 2.45 seconds Run test-runner with smp-tester Total: 8, Passed: 7 (87.5%), Failed: 1, Not Run: 0 Failed Test Cases SMP Client - SC Request 2 Failed 0.028 seconds ############################## Test: TestRunner: userchan-tester - PASS - 2.29 seconds Run test-runner with userchan-tester Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0 --- Regards, Linux Bluetooth
Hi Forest, > The LG LGSBWAC92/TWCM-K505D/EAT64454801/EAT64454802 (it goes by many > names) is a combo WiFi/Bluetooth module that's used in several models of > LG TVs. It uses the MediaTek MT7668AUN, which is already supported in > btusb, but this device has a non-MediaTek VID:PID pair so to get it to > work we just need to add it to the list of devices to probe. > > Device from /sys/kernel/debug/usb/devices: > > T: Bus=09 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=043e ProdID=3109 Rev= 1.00 > S: Manufacturer=MediaTek Inc. > S: Product=Wireless_Device > S: SerialNumber=000000000 > C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA > A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms > I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > > Signed-off-by: Forest Crossman <cyrozap@gmail.com> > --- > > Changes from v2: > - Specify device with USB_DEVICE again, to match the other "Additional > MediaTek Bluetooth devices". > - Add BTUSB_WIDEBAND_SPEECH and BTUSB_VALID_LE_STATES flags to the > driver_info, since this device would otherwise have them applied were > it not for the non-MediaTek vendor ID. > > Changes from v1: > - Added /sys/kernel/debug/usb/devices info. > - Specify device with USB_DEVICE_AND_INTERFACE_INFO instead of just > USB_DEVICE. > > --- > drivers/bluetooth/btusb.c | 5 +++++ > 1 file changed, 5 insertions(+) patch has been applied to bluetooth-next tree. Regards Marcel
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index a9855a2dd561..d644e704a460 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -410,6 +410,11 @@ static const struct usb_device_id blacklist_table[] = { /* Additional MediaTek MT7615E Bluetooth devices */ { USB_DEVICE(0x13d3, 0x3560), .driver_info = BTUSB_MEDIATEK}, + /* Additional MediaTek MT7668 Bluetooth devices */ + { USB_DEVICE(0x043e, 0x3109), .driver_info = BTUSB_MEDIATEK | + BTUSB_WIDEBAND_SPEECH | + BTUSB_VALID_LE_STATES }, + /* Additional MediaTek MT7921 Bluetooth devices */ { USB_DEVICE(0x04ca, 0x3802), .driver_info = BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH |
The LG LGSBWAC92/TWCM-K505D/EAT64454801/EAT64454802 (it goes by many names) is a combo WiFi/Bluetooth module that's used in several models of LG TVs. It uses the MediaTek MT7668AUN, which is already supported in btusb, but this device has a non-MediaTek VID:PID pair so to get it to work we just need to add it to the list of devices to probe. Device from /sys/kernel/debug/usb/devices: T: Bus=09 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=043e ProdID=3109 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Forest Crossman <cyrozap@gmail.com> --- Changes from v2: - Specify device with USB_DEVICE again, to match the other "Additional MediaTek Bluetooth devices". - Add BTUSB_WIDEBAND_SPEECH and BTUSB_VALID_LE_STATES flags to the driver_info, since this device would otherwise have them applied were it not for the non-MediaTek vendor ID. Changes from v1: - Added /sys/kernel/debug/usb/devices info. - Specify device with USB_DEVICE_AND_INTERFACE_INFO instead of just USB_DEVICE. --- drivers/bluetooth/btusb.c | 5 +++++ 1 file changed, 5 insertions(+)