deleted file mode 100644
@@ -1,68 +0,0 @@
-* Rockchip RK3399 Clock and Reset Unit
-
-The RK3399 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: PMU for CRU should be "rockchip,rk3399-pmucru"
-- compatible: CRU should be "rockchip,rk3399-cru"
-- reg: physical base address of the controller and length of memory mapped
- region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files".
- It is used for GRF muxes, if missing any muxes present in the GRF will not
- be available.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "clkin_gmac" - external GMAC clock - optional,
- - "clkin_i2s" - external I2S clock - optional,
- - "pclkin_cif" - external ISP clock - optional,
- - "clk_usbphy0_480m" - output clock of the pll in the usbphy0
- - "clk_usbphy1_480m" - output clock of the pll in the usbphy1
-
-Example: Clock controller node:
-
- pmucru: pmu-clock-controller@ff750000 {
- compatible = "rockchip,rk3399-pmucru";
- reg = <0x0 0xff750000 0x0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- cru: clock-controller@ff760000 {
- compatible = "rockchip,rk3399-cru";
- reg = <0x0 0xff760000 0x0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
-Example: UART controller node that consumes the clock generated by the clock
- controller:
-
- uart0: serial@ff1a0000 {
- compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff180000 0x0 0x100>;
- clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
- clock-names = "baudclk", "apb_pclk";
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- };
new file mode 100644
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3399-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3399 Clock and Reset Unit
+
+maintainers:
+ - Xing Zheng <zhengxing@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+ The RK3399 clock controller generates and supplies clock to various
+ controllers within the SoC and also implements a reset controller for SoC
+ peripherals.
+ Each clock is assigned an identifier and client nodes can use this identifier
+ to specify the clock which they consume. All available clocks are defined as
+ preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be
+ used in device tree sources. Similar macros exist for the reset sources in
+ these files.
+ There are several clocks that are generated outside the SoC. It is expected
+ that they are defined using standard clock bindings with following
+ clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "clkin_gmac" - external GMAC clock - optional,
+ - "clkin_i2s" - external I2S clock - optional,
+ - "pclkin_cif" - external ISP clock - optional,
+ - "clk_usbphy0_480m" - output clock of the pll in the usbphy0
+ - "clk_usbphy1_480m" - output clock of the pll in the usbphy1
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk3399-pmucru
+ - rockchip,rk3399-cru
+
+ reg:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 1
+
+ "#reset-cells":
+ const: 1
+
+ clocks:
+ minItems: 1
+
+ assigned-clocks:
+ minItems: 1
+ maxItems: 64
+
+ assigned-clock-parents:
+ minItems: 1
+ maxItems: 64
+
+ assigned-clock-rates:
+ minItems: 1
+ maxItems: 64
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: >
+ phandle to the syscon managing the "general register files". It is used
+ for GRF muxes, if missing any muxes present in the GRF will not be
+ available.
+
+required:
+ - compatible
+ - reg
+ - "#clock-cells"
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ pmucru: pmu-clock-controller@ff750000 {
+ compatible = "rockchip,rk3399-pmucru";
+ reg = <0xff750000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+ - |
+ cru: clock-controller@ff760000 {
+ compatible = "rockchip,rk3399-cru";
+ reg = <0xff760000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
Convert the rockchip,rk3399-cru binding to DT schema format. Tested with ARCH=arm64 make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml ARCH=arm64 make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> --- One caveat is that this node expects certain external clocks, mainly 'xin24m'. From what I read of clock-bindings.txt, it seems the way to make this dependency explicit would be to add 'clocks' and 'clock-names' properties to both the DT and the binding. But since I'm not sure changing the DT ABI is desirable, I just moved that information to the binding description for now. .../bindings/clock/rockchip,rk3399-cru.txt | 68 -------------- .../bindings/clock/rockchip,rk3399-cru.yaml | 92 +++++++++++++++++++ 2 files changed, 92 insertions(+), 68 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml