| Message ID | 20210720172025.363238-1-robh@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: Remove "status" from schema examples | expand |
Em Tue, 20 Jul 2021 11:20:25 -0600 Rob Herring <robh@kernel.org> escreveu: > There's no reason to have "status" properties in examples. "okay" is the > default, and "disabled" turns off some schema checks ('required' > specifically). > > Enabling qca,ar71xx causes a warning, so let's fix the node names: > > Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property > From schema: schemas/phy/phy-provider.yaml > > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Chen-Yu Tsai <wens@csie.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Rui Miguel Silva <rmfrfs@gmail.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Robert Marko <robert.marko@sartura.hr> > Cc: Philipp Zabel <p.zabel@pengutronix.de> > Cc: Alessandro Zummo <a.zummo@towertech.it> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com> > Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Oleksij Rempel <o.rempel@pengutronix.de> > Cc: ChiYuan Huang <cy_huang@richtek.com> > Cc: Wei Xu <xuwei5@hisilicon.com> > Cc: Dilip Kota <eswara.kota@linux.intel.com> > Cc: Karol Gugala <kgugala@antmicro.com> > Cc: Mateusz Holenko <mholenko@antmicro.com> > Cc: Olivier Moysan <olivier.moysan@st.com> > Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-media@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-rtc@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 -- > .../display/panel/boe,tv101wum-nl6.yaml | 1 - > .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 -- > .../bindings/media/renesas,drif.yaml | 1 - Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> # For media Thanks, Mauro
Hi Rob, On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote: > There's no reason to have "status" properties in examples. "okay" is the > default, and "disabled" turns off some schema checks ('required' > specifically). > > Enabling qca,ar71xx causes a warning, so let's fix the node names: > > Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property > From schema: schemas/phy/phy-provider.yaml I had preferred that the names was fixed in a dedicated patch - to avoid mixing things. But thats just nitpicking, so: Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
On Tue Jul 20, 2021 at 6:20 PM WEST, Rob Herring wrote: > There's no reason to have "status" properties in examples. "okay" is the > default, and "disabled" turns off some schema checks ('required' > specifically). > > Enabling qca,ar71xx causes a warning, so let's fix the node names: > > Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property > From schema: schemas/phy/phy-provider.yaml > > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Chen-Yu Tsai <wens@csie.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Rui Miguel Silva <rmfrfs@gmail.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Robert Marko <robert.marko@sartura.hr> > Cc: Philipp Zabel <p.zabel@pengutronix.de> > Cc: Alessandro Zummo <a.zummo@towertech.it> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com> > Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Oleksij Rempel <o.rempel@pengutronix.de> > Cc: ChiYuan Huang <cy_huang@richtek.com> > Cc: Wei Xu <xuwei5@hisilicon.com> > Cc: Dilip Kota <eswara.kota@linux.intel.com> > Cc: Karol Gugala <kgugala@antmicro.com> > Cc: Mateusz Holenko <mholenko@antmicro.com> > Cc: Olivier Moysan <olivier.moysan@st.com> > Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-media@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-rtc@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 -- > .../display/panel/boe,tv101wum-nl6.yaml | 1 - > .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 -- Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Cheers, Rui
On 20/07/2021 11:20:25-0600, Rob Herring wrote: > There's no reason to have "status" properties in examples. "okay" is the > default, and "disabled" turns off some schema checks ('required' > specifically). > > Enabling qca,ar71xx causes a warning, so let's fix the node names: > > Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property > From schema: schemas/phy/phy-provider.yaml > > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Chen-Yu Tsai <wens@csie.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Rui Miguel Silva <rmfrfs@gmail.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Robert Marko <robert.marko@sartura.hr> > Cc: Philipp Zabel <p.zabel@pengutronix.de> > Cc: Alessandro Zummo <a.zummo@towertech.it> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com> > Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Oleksij Rempel <o.rempel@pengutronix.de> > Cc: ChiYuan Huang <cy_huang@richtek.com> > Cc: Wei Xu <xuwei5@hisilicon.com> > Cc: Dilip Kota <eswara.kota@linux.intel.com> > Cc: Karol Gugala <kgugala@antmicro.com> > Cc: Mateusz Holenko <mholenko@antmicro.com> > Cc: Olivier Moysan <olivier.moysan@st.com> > Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-media@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-rtc@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> > --- > .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 -- > .../display/panel/boe,tv101wum-nl6.yaml | 1 - > .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 -- > .../bindings/media/renesas,drif.yaml | 1 - > .../bindings/net/intel,dwmac-plat.yaml | 2 -- > .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 -- > .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 --- > .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++--------------- > .../regulator/richtek,rt6245-regulator.yaml | 1 - > .../regulator/vqmmc-ipq4019-regulator.yaml | 1 - > .../reset/hisilicon,hi3660-reset.yaml | 1 - > .../bindings/reset/intel,rcu-gw.yaml | 1 - > .../bindings/rtc/microcrystal,rv3032.yaml | 1 - > .../soc/litex/litex,soc-controller.yaml | 1 - > .../bindings/sound/st,stm32-sai.yaml | 2 -- > .../bindings/sound/ti,j721e-cpb-audio.yaml | 2 -- > .../sound/ti,j721e-cpb-ivi-audio.yaml | 2 -- > 17 files changed, 5 insertions(+), 45 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml > index 5d42d36608d9..4951b5ef5c6a 100644 > --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml > +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml > @@ -174,7 +174,6 @@ examples: > phy-names = "phy"; > pinctrl-names = "default"; > pinctrl-0 = <&hdmi_pins>; > - status = "disabled"; > > ports { > #address-cells = <1>; > @@ -233,7 +232,6 @@ examples: > phy-names = "phy"; > pinctrl-names = "default"; > pinctrl-0 = <&hdmi_pins>; > - status = "disabled"; > > ports { > #address-cells = <1>; > diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > index 38bc1d1b511e..b87a2e28c866 100644 > --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > @@ -70,7 +70,6 @@ examples: > avee-supply = <&ppvarp_lcd>; > pp1800-supply = <&pp1800_lcd>; > backlight = <&backlight_lcd0>; > - status = "okay"; > port { > panel_in: endpoint { > remote-endpoint = <&dsi_out>; > diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > index 7c09eec78ce5..877183cf4278 100644 > --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > @@ -200,8 +200,6 @@ examples: > clock-names = "pclk", "wrap", "phy", "axi"; > power-domains = <&mipi_pd>; > > - status = "disabled"; > - > ports { > #address-cells = <1>; > #size-cells = <0>; > diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml > index 2867d11fe156..9403b235e976 100644 > --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml > +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml > @@ -242,7 +242,6 @@ examples: > power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; > resets = <&cpg 513>; > renesas,bonding = <&drif11>; > - status = "disabled"; > }; > > drif11: rif@e6f70000 { > diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml > index c1948ce00081..79fa04f5e40d 100644 > --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml > +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml > @@ -116,8 +116,6 @@ examples: > snps,mtl-rx-config = <&mtl_rx_setup>; > snps,mtl-tx-config = <&mtl_tx_setup>; > snps,tso; > - status = "okay"; > - > mdio0 { > #address-cells = <1>; > #size-cells = <0>; > diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml > index f2e91d1bf7d7..378ed2d3b003 100644 > --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml > +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml > @@ -71,7 +71,6 @@ examples: > ethernet@c8009000 { > compatible = "intel,ixp4xx-ethernet"; > reg = <0xc8009000 0x1000>; > - status = "disabled"; > queue-rx = <&qmgr 4>; > queue-txready = <&qmgr 21>; > intel,npe-handle = <&npe 1>; > @@ -82,7 +81,6 @@ examples: > ethernet@c800c000 { > compatible = "intel,ixp4xx-ethernet"; > reg = <0xc800c000 0x1000>; > - status = "disabled"; > queue-rx = <&qmgr 3>; > queue-txready = <&qmgr 20>; > intel,npe-handle = <&npe 2>; > diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml > index 081742c2b726..64995cbb0f97 100644 > --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml > +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml > @@ -90,14 +90,11 @@ examples: > # UART example on Raspberry Pi > - | > uart0 { > - status = "okay"; > - > nfc { > compatible = "samsung,s3fwrn82"; > > en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; > wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; > > - status = "okay"; > }; > }; > diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml > index f0db22645d73..cf4d35edaa1b 100644 > --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml > +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml > @@ -101,8 +101,6 @@ examples: > > phy-mode = "gmii"; > > - status = "disabled"; > - > fixed-link { > speed = <1000>; > full-duplex; > @@ -148,32 +146,24 @@ examples: > reg = <0x1>; > phy-handle = <&phy_port0>; > phy-mode = "internal"; > - > - status = "disabled"; > }; > > switch_port2: port@2 { > reg = <0x2>; > phy-handle = <&phy_port1>; > phy-mode = "internal"; > - > - status = "disabled"; > }; > > switch_port3: port@3 { > reg = <0x3>; > phy-handle = <&phy_port2>; > phy-mode = "internal"; > - > - status = "disabled"; > }; > > switch_port4: port@4 { > reg = <0x4>; > phy-handle = <&phy_port3>; > phy-mode = "internal"; > - > - status = "disabled"; > }; > }; > > @@ -183,34 +173,29 @@ examples: > > interrupt-parent = <&switch10>; > > - phy_port0: phy@0 { > + phy_port0: ethernet-phy@0 { > reg = <0x0>; > interrupts = <0>; > - status = "disabled"; > }; > > - phy_port1: phy@1 { > + phy_port1: ethernet-phy@1 { > reg = <0x1>; > interrupts = <0>; > - status = "disabled"; > }; > > - phy_port2: phy@2 { > + phy_port2: ethernet-phy@2 { > reg = <0x2>; > interrupts = <0>; > - status = "disabled"; > }; > > - phy_port3: phy@3 { > + phy_port3: ethernet-phy@3 { > reg = <0x3>; > interrupts = <0>; > - status = "disabled"; > }; > > - phy_port4: phy@4 { > + phy_port4: ethernet-phy@4 { > reg = <0x4>; > interrupts = <0>; > - status = "disabled"; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml > index 796ceac87445..e983d0e70c9b 100644 > --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml > +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml > @@ -77,7 +77,6 @@ examples: > > rt6245@34 { > compatible = "richtek,rt6245"; > - status = "okay"; > reg = <0x34>; > enable-gpios = <&gpio26 2 0>; > > diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml > index 6f45582c914e..dd7a2f92634c 100644 > --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml > +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml > @@ -39,6 +39,5 @@ examples: > regulator-min-microvolt = <1500000>; > regulator-max-microvolt = <3000000>; > regulator-always-on; > - status = "disabled"; > }; > ... > diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml > index 9bf40952e5b7..b0c41ab1a746 100644 > --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml > +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml > @@ -72,6 +72,5 @@ examples: > resets = <&iomcu_rst 0x20 3>; > pinctrl-names = "default"; > pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; > - status = "disabled"; > }; > ... > diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml > index 6b2d56cc3f38..13bf6bb3f097 100644 > --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml > +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml > @@ -57,7 +57,6 @@ examples: > }; > > pwm: pwm@e0d00000 { > - status = "disabled"; > compatible = "intel,lgm-pwm"; > reg = <0xe0d00000 0x30>; > clocks = <&cgu0 1>; > diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml > index a2c55303810d..9593840a4a2b 100644 > --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml > +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml > @@ -53,7 +53,6 @@ examples: > rtc@51 { > compatible = "microcrystal,rv3032"; > reg = <0x51>; > - status = "okay"; > pinctrl-0 = <&rtc_nint_pins>; > interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>; > trickle-resistor-ohms = <7000>; > diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml > index c8b57c7fd08c..ecae9fa8561b 100644 > --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml > +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml > @@ -35,7 +35,6 @@ examples: > soc_ctrl0: soc-controller@f0000000 { > compatible = "litex,soc-controller"; > reg = <0xf0000000 0xc>; > - status = "okay"; > }; > > ... > diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml > index 06e83461705c..f97132400bb6 100644 > --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml > +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml > @@ -180,7 +180,6 @@ examples: > pinctrl-names = "default", "sleep"; > pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; > pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; > - status = "okay"; > > sai2a: audio-controller@4400b004 { > #sound-dai-cells = <0>; > @@ -190,7 +189,6 @@ examples: > dma-names = "tx"; > clocks = <&rcc SAI2_K>; > clock-names = "sai_ck"; > - status = "okay"; > }; > }; > > diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml > index ec06789b21df..6806f53a4aed 100644 > --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml > +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml > @@ -127,8 +127,6 @@ examples: > compatible = "ti,j721e-cpb-audio"; > model = "j721e-cpb"; > > - status = "okay"; > - > ti,cpb-mcasp = <&mcasp10>; > ti,cpb-codec = <&pcm3168a_1>; > > diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml > index ee9f960de36b..859d369c71e2 100644 > --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml > +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml > @@ -119,8 +119,6 @@ examples: > compatible = "ti,j721e-cpb-ivi-audio"; > model = "j721e-cpb-ivi"; > > - status = "okay"; > - > ti,cpb-mcasp = <&mcasp10>; > ti,cpb-codec = <&pcm3168a_1>; > > -- > 2.27.0 >
On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote: > There's no reason to have "status" properties in examples. "okay" is the > default, and "disabled" turns off some schema checks ('required' > specifically). Acked-by: Mark Brown <broonie@kernel.org>
Hi Rob, On Tue, 2021-07-20 at 11:20 -0600, Rob Herring wrote: > There's no reason to have "status" properties in examples. "okay" is the > default, and "disabled" turns off some schema checks ('required' > specifically). Is this documented somewhere? If not, should it be? (Maybe in writing- schema.rst -> Schema Contents -> examples?) > Enabling qca,ar71xx causes a warning, so let's fix the node names: > > Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property > From schema: schemas/phy/phy-provider.yaml > > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Chen-Yu Tsai <wens@csie.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Rui Miguel Silva <rmfrfs@gmail.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Robert Marko <robert.marko@sartura.hr> > Cc: Philipp Zabel <p.zabel@pengutronix.de> > Cc: Alessandro Zummo <a.zummo@towertech.it> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com> > Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Oleksij Rempel <o.rempel@pengutronix.de> > Cc: ChiYuan Huang <cy_huang@richtek.com> > Cc: Wei Xu <xuwei5@hisilicon.com> > Cc: Dilip Kota <eswara.kota@linux.intel.com> > Cc: Karol Gugala <kgugala@antmicro.com> > Cc: Mateusz Holenko <mholenko@antmicro.com> > Cc: Olivier Moysan <olivier.moysan@st.com> > Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-media@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-rtc@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 -- > .../display/panel/boe,tv101wum-nl6.yaml | 1 - > .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 -- > .../bindings/media/renesas,drif.yaml | 1 - > .../bindings/net/intel,dwmac-plat.yaml | 2 -- > .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 -- > .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 --- > .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++--------------- > .../regulator/richtek,rt6245-regulator.yaml | 1 - > .../regulator/vqmmc-ipq4019-regulator.yaml | 1 - > .../reset/hisilicon,hi3660-reset.yaml | 1 - > .../bindings/reset/intel,rcu-gw.yaml | 1 - [...] Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> regards Philipp
On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote: > There's no reason to have "status" properties in examples. "okay" is the > default, and "disabled" turns off some schema checks ('required' > specifically). > > Enabling qca,ar71xx causes a warning, so let's fix the node names: > > Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property > From schema: schemas/phy/phy-provider.yaml > > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Chen-Yu Tsai <wens@csie.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Rui Miguel Silva <rmfrfs@gmail.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Robert Marko <robert.marko@sartura.hr> > Cc: Philipp Zabel <p.zabel@pengutronix.de> > Cc: Alessandro Zummo <a.zummo@towertech.it> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com> > Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Oleksij Rempel <o.rempel@pengutronix.de> > Cc: ChiYuan Huang <cy_huang@richtek.com> > Cc: Wei Xu <xuwei5@hisilicon.com> > Cc: Dilip Kota <eswara.kota@linux.intel.com> > Cc: Karol Gugala <kgugala@antmicro.com> > Cc: Mateusz Holenko <mholenko@antmicro.com> > Cc: Olivier Moysan <olivier.moysan@st.com> > Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-media@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-rtc@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> > --- > .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 -- > .../display/panel/boe,tv101wum-nl6.yaml | 1 - > .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 -- > .../bindings/media/renesas,drif.yaml | 1 - > .../bindings/net/intel,dwmac-plat.yaml | 2 -- > .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 -- > .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 --- > .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++--------------- > .../regulator/richtek,rt6245-regulator.yaml | 1 - > .../regulator/vqmmc-ipq4019-regulator.yaml | 1 - > .../reset/hisilicon,hi3660-reset.yaml | 1 - > .../bindings/reset/intel,rcu-gw.yaml | 1 - > .../bindings/rtc/microcrystal,rv3032.yaml | 1 - > .../soc/litex/litex,soc-controller.yaml | 1 - > .../bindings/sound/st,stm32-sai.yaml | 2 -- > .../bindings/sound/ti,j721e-cpb-audio.yaml | 2 -- > .../sound/ti,j721e-cpb-ivi-audio.yaml | 2 -- > 17 files changed, 5 insertions(+), 45 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml > index 5d42d36608d9..4951b5ef5c6a 100644 > --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml > +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml > @@ -174,7 +174,6 @@ examples: > phy-names = "phy"; > pinctrl-names = "default"; > pinctrl-0 = <&hdmi_pins>; > - status = "disabled"; > > ports { > #address-cells = <1>; > @@ -233,7 +232,6 @@ examples: > phy-names = "phy"; > pinctrl-names = "default"; > pinctrl-0 = <&hdmi_pins>; > - status = "disabled"; > > ports { > #address-cells = <1>; > diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > index 38bc1d1b511e..b87a2e28c866 100644 > --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > @@ -70,7 +70,6 @@ examples: > avee-supply = <&ppvarp_lcd>; > pp1800-supply = <&pp1800_lcd>; > backlight = <&backlight_lcd0>; > - status = "okay"; > port { > panel_in: endpoint { > remote-endpoint = <&dsi_out>; > diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > index 7c09eec78ce5..877183cf4278 100644 > --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > @@ -200,8 +200,6 @@ examples: > clock-names = "pclk", "wrap", "phy", "axi"; > power-domains = <&mipi_pd>; > > - status = "disabled"; > - > ports { > #address-cells = <1>; > #size-cells = <0>; > diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml > index 2867d11fe156..9403b235e976 100644 > --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml > +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml > @@ -242,7 +242,6 @@ examples: > power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; > resets = <&cpg 513>; > renesas,bonding = <&drif11>; > - status = "disabled"; > }; > > drif11: rif@e6f70000 { > diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml > index c1948ce00081..79fa04f5e40d 100644 > --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml > +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml > @@ -116,8 +116,6 @@ examples: > snps,mtl-rx-config = <&mtl_rx_setup>; > snps,mtl-tx-config = <&mtl_tx_setup>; > snps,tso; > - status = "okay"; > - > mdio0 { > #address-cells = <1>; > #size-cells = <0>; > diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml > index f2e91d1bf7d7..378ed2d3b003 100644 > --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml > +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml > @@ -71,7 +71,6 @@ examples: > ethernet@c8009000 { > compatible = "intel,ixp4xx-ethernet"; > reg = <0xc8009000 0x1000>; > - status = "disabled"; > queue-rx = <&qmgr 4>; > queue-txready = <&qmgr 21>; > intel,npe-handle = <&npe 1>; > @@ -82,7 +81,6 @@ examples: > ethernet@c800c000 { > compatible = "intel,ixp4xx-ethernet"; > reg = <0xc800c000 0x1000>; > - status = "disabled"; > queue-rx = <&qmgr 3>; > queue-txready = <&qmgr 20>; > intel,npe-handle = <&npe 2>; > diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml > index 081742c2b726..64995cbb0f97 100644 > --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml > +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml > @@ -90,14 +90,11 @@ examples: > # UART example on Raspberry Pi > - | > uart0 { > - status = "okay"; > - > nfc { > compatible = "samsung,s3fwrn82"; > > en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; > wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; > > - status = "okay"; > }; > }; > diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml > index f0db22645d73..cf4d35edaa1b 100644 > --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml > +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml > @@ -101,8 +101,6 @@ examples: > > phy-mode = "gmii"; > > - status = "disabled"; > - > fixed-link { > speed = <1000>; > full-duplex; > @@ -148,32 +146,24 @@ examples: > reg = <0x1>; > phy-handle = <&phy_port0>; > phy-mode = "internal"; > - > - status = "disabled"; > }; > > switch_port2: port@2 { > reg = <0x2>; > phy-handle = <&phy_port1>; > phy-mode = "internal"; > - > - status = "disabled"; > }; > > switch_port3: port@3 { > reg = <0x3>; > phy-handle = <&phy_port2>; > phy-mode = "internal"; > - > - status = "disabled"; > }; > > switch_port4: port@4 { > reg = <0x4>; > phy-handle = <&phy_port3>; > phy-mode = "internal"; > - > - status = "disabled"; > }; > }; > > @@ -183,34 +173,29 @@ examples: > > interrupt-parent = <&switch10>; > > - phy_port0: phy@0 { > + phy_port0: ethernet-phy@0 { > reg = <0x0>; > interrupts = <0>; > - status = "disabled"; > }; > > - phy_port1: phy@1 { > + phy_port1: ethernet-phy@1 { > reg = <0x1>; > interrupts = <0>; > - status = "disabled"; > }; > > - phy_port2: phy@2 { > + phy_port2: ethernet-phy@2 { > reg = <0x2>; > interrupts = <0>; > - status = "disabled"; > }; > > - phy_port3: phy@3 { > + phy_port3: ethernet-phy@3 { > reg = <0x3>; > interrupts = <0>; > - status = "disabled"; > }; > > - phy_port4: phy@4 { > + phy_port4: ethernet-phy@4 { > reg = <0x4>; > interrupts = <0>; > - status = "disabled"; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml > index 796ceac87445..e983d0e70c9b 100644 > --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml > +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml > @@ -77,7 +77,6 @@ examples: > > rt6245@34 { > compatible = "richtek,rt6245"; > - status = "okay"; > reg = <0x34>; > enable-gpios = <&gpio26 2 0>; > > diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml > index 6f45582c914e..dd7a2f92634c 100644 > --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml > +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml > @@ -39,6 +39,5 @@ examples: > regulator-min-microvolt = <1500000>; > regulator-max-microvolt = <3000000>; > regulator-always-on; > - status = "disabled"; > }; > ... > diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml > index 9bf40952e5b7..b0c41ab1a746 100644 > --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml > +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml > @@ -72,6 +72,5 @@ examples: > resets = <&iomcu_rst 0x20 3>; > pinctrl-names = "default"; > pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; > - status = "disabled"; > }; > ... > diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml > index 6b2d56cc3f38..13bf6bb3f097 100644 > --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml > +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml > @@ -57,7 +57,6 @@ examples: > }; > > pwm: pwm@e0d00000 { > - status = "disabled"; > compatible = "intel,lgm-pwm"; > reg = <0xe0d00000 0x30>; > clocks = <&cgu0 1>; > diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml > index a2c55303810d..9593840a4a2b 100644 > --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml > +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml > @@ -53,7 +53,6 @@ examples: > rtc@51 { > compatible = "microcrystal,rv3032"; > reg = <0x51>; > - status = "okay"; > pinctrl-0 = <&rtc_nint_pins>; > interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>; > trickle-resistor-ohms = <7000>; > diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml > index c8b57c7fd08c..ecae9fa8561b 100644 > --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml > +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml > @@ -35,7 +35,6 @@ examples: > soc_ctrl0: soc-controller@f0000000 { > compatible = "litex,soc-controller"; > reg = <0xf0000000 0xc>; > - status = "okay"; > }; > > ... > diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml > index 06e83461705c..f97132400bb6 100644 > --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml > +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml > @@ -180,7 +180,6 @@ examples: > pinctrl-names = "default", "sleep"; > pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; > pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; > - status = "okay"; > > sai2a: audio-controller@4400b004 { > #sound-dai-cells = <0>; > @@ -190,7 +189,6 @@ examples: > dma-names = "tx"; > clocks = <&rcc SAI2_K>; > clock-names = "sai_ck"; > - status = "okay"; > }; > }; > > diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml > index ec06789b21df..6806f53a4aed 100644 > --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml > +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml > @@ -127,8 +127,6 @@ examples: > compatible = "ti,j721e-cpb-audio"; > model = "j721e-cpb"; > > - status = "okay"; > - > ti,cpb-mcasp = <&mcasp10>; > ti,cpb-codec = <&pcm3168a_1>; > > diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml > index ee9f960de36b..859d369c71e2 100644 > --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml > +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml > @@ -119,8 +119,6 @@ examples: > compatible = "ti,j721e-cpb-ivi-audio"; > model = "j721e-cpb-ivi"; > > - status = "okay"; > - > ti,cpb-mcasp = <&mcasp10>; > ti,cpb-codec = <&pcm3168a_1>; > > -- > 2.27.0 > >
On Wed, Jul 21, 2021 at 2:33 AM Philipp Zabel <p.zabel@pengutronix.de> wrote: > > Hi Rob, > > On Tue, 2021-07-20 at 11:20 -0600, Rob Herring wrote: > > There's no reason to have "status" properties in examples. "okay" is the > > default, and "disabled" turns off some schema checks ('required' > > specifically). > > Is this documented somewhere? If not, should it be? (Maybe in writing- > schema.rst -> Schema Contents -> examples?) I don't think it is. I'm writing a schema for it which works for both those that read documentation and those that don't. Rob
On Tue, Jul 20, 2021 at 7:20 PM Rob Herring <robh@kernel.org> wrote: > There's no reason to have "status" properties in examples. "okay" is the > default, and "disabled" turns off some schema checks ('required' > specifically). All of mine are mistakes anyway. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Thanks for fixing this up. Yours, Linus Walleij
On Tue, 20 Jul 2021 11:20:25 -0600, Rob Herring wrote: > There's no reason to have "status" properties in examples. "okay" is the > default, and "disabled" turns off some schema checks ('required' > specifically). > > Enabling qca,ar71xx causes a warning, so let's fix the node names: > > Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property > From schema: schemas/phy/phy-provider.yaml > > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Chen-Yu Tsai <wens@csie.org> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > Cc: Rui Miguel Silva <rmfrfs@gmail.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Jakub Kicinski <kuba@kernel.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Robert Marko <robert.marko@sartura.hr> > Cc: Philipp Zabel <p.zabel@pengutronix.de> > Cc: Alessandro Zummo <a.zummo@towertech.it> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com> > Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > Cc: Oleksij Rempel <o.rempel@pengutronix.de> > Cc: ChiYuan Huang <cy_huang@richtek.com> > Cc: Wei Xu <xuwei5@hisilicon.com> > Cc: Dilip Kota <eswara.kota@linux.intel.com> > Cc: Karol Gugala <kgugala@antmicro.com> > Cc: Mateusz Holenko <mholenko@antmicro.com> > Cc: Olivier Moysan <olivier.moysan@st.com> > Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> > Cc: dri-devel@lists.freedesktop.org > Cc: linux-media@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-rtc@vger.kernel.org > Cc: alsa-devel@alsa-project.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 -- > .../display/panel/boe,tv101wum-nl6.yaml | 1 - > .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 -- > .../bindings/media/renesas,drif.yaml | 1 - > .../bindings/net/intel,dwmac-plat.yaml | 2 -- > .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 -- > .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 --- > .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++--------------- > .../regulator/richtek,rt6245-regulator.yaml | 1 - > .../regulator/vqmmc-ipq4019-regulator.yaml | 1 - > .../reset/hisilicon,hi3660-reset.yaml | 1 - > .../bindings/reset/intel,rcu-gw.yaml | 1 - > .../bindings/rtc/microcrystal,rv3032.yaml | 1 - > .../soc/litex/litex,soc-controller.yaml | 1 - > .../bindings/sound/st,stm32-sai.yaml | 2 -- > .../bindings/sound/ti,j721e-cpb-audio.yaml | 2 -- > .../sound/ti,j721e-cpb-ivi-audio.yaml | 2 -- > 17 files changed, 5 insertions(+), 45 deletions(-) > Applied, thanks!
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml index 5d42d36608d9..4951b5ef5c6a 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -174,7 +174,6 @@ examples: phy-names = "phy"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_pins>; - status = "disabled"; ports { #address-cells = <1>; @@ -233,7 +232,6 @@ examples: phy-names = "phy"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_pins>; - status = "disabled"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml index 38bc1d1b511e..b87a2e28c866 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -70,7 +70,6 @@ examples: avee-supply = <&ppvarp_lcd>; pp1800-supply = <&pp1800_lcd>; backlight = <&backlight_lcd0>; - status = "okay"; port { panel_in: endpoint { remote-endpoint = <&dsi_out>; diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml index 7c09eec78ce5..877183cf4278 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml @@ -200,8 +200,6 @@ examples: clock-names = "pclk", "wrap", "phy", "axi"; power-domains = <&mipi_pd>; - status = "disabled"; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml index 2867d11fe156..9403b235e976 100644 --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml @@ -242,7 +242,6 @@ examples: power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 513>; renesas,bonding = <&drif11>; - status = "disabled"; }; drif11: rif@e6f70000 { diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml index c1948ce00081..79fa04f5e40d 100644 --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml @@ -116,8 +116,6 @@ examples: snps,mtl-rx-config = <&mtl_rx_setup>; snps,mtl-tx-config = <&mtl_tx_setup>; snps,tso; - status = "okay"; - mdio0 { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml index f2e91d1bf7d7..378ed2d3b003 100644 --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml @@ -71,7 +71,6 @@ examples: ethernet@c8009000 { compatible = "intel,ixp4xx-ethernet"; reg = <0xc8009000 0x1000>; - status = "disabled"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; intel,npe-handle = <&npe 1>; @@ -82,7 +81,6 @@ examples: ethernet@c800c000 { compatible = "intel,ixp4xx-ethernet"; reg = <0xc800c000 0x1000>; - status = "disabled"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; intel,npe-handle = <&npe 2>; diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml index 081742c2b726..64995cbb0f97 100644 --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml @@ -90,14 +90,11 @@ examples: # UART example on Raspberry Pi - | uart0 { - status = "okay"; - nfc { compatible = "samsung,s3fwrn82"; en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml index f0db22645d73..cf4d35edaa1b 100644 --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml @@ -101,8 +101,6 @@ examples: phy-mode = "gmii"; - status = "disabled"; - fixed-link { speed = <1000>; full-duplex; @@ -148,32 +146,24 @@ examples: reg = <0x1>; phy-handle = <&phy_port0>; phy-mode = "internal"; - - status = "disabled"; }; switch_port2: port@2 { reg = <0x2>; phy-handle = <&phy_port1>; phy-mode = "internal"; - - status = "disabled"; }; switch_port3: port@3 { reg = <0x3>; phy-handle = <&phy_port2>; phy-mode = "internal"; - - status = "disabled"; }; switch_port4: port@4 { reg = <0x4>; phy-handle = <&phy_port3>; phy-mode = "internal"; - - status = "disabled"; }; }; @@ -183,34 +173,29 @@ examples: interrupt-parent = <&switch10>; - phy_port0: phy@0 { + phy_port0: ethernet-phy@0 { reg = <0x0>; interrupts = <0>; - status = "disabled"; }; - phy_port1: phy@1 { + phy_port1: ethernet-phy@1 { reg = <0x1>; interrupts = <0>; - status = "disabled"; }; - phy_port2: phy@2 { + phy_port2: ethernet-phy@2 { reg = <0x2>; interrupts = <0>; - status = "disabled"; }; - phy_port3: phy@3 { + phy_port3: ethernet-phy@3 { reg = <0x3>; interrupts = <0>; - status = "disabled"; }; - phy_port4: phy@4 { + phy_port4: ethernet-phy@4 { reg = <0x4>; interrupts = <0>; - status = "disabled"; }; }; }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml index 796ceac87445..e983d0e70c9b 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml @@ -77,7 +77,6 @@ examples: rt6245@34 { compatible = "richtek,rt6245"; - status = "okay"; reg = <0x34>; enable-gpios = <&gpio26 2 0>; diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml index 6f45582c914e..dd7a2f92634c 100644 --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml @@ -39,6 +39,5 @@ examples: regulator-min-microvolt = <1500000>; regulator-max-microvolt = <3000000>; regulator-always-on; - status = "disabled"; }; ... diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml index 9bf40952e5b7..b0c41ab1a746 100644 --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml @@ -72,6 +72,5 @@ examples: resets = <&iomcu_rst 0x20 3>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; - status = "disabled"; }; ... diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml index 6b2d56cc3f38..13bf6bb3f097 100644 --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml @@ -57,7 +57,6 @@ examples: }; pwm: pwm@e0d00000 { - status = "disabled"; compatible = "intel,lgm-pwm"; reg = <0xe0d00000 0x30>; clocks = <&cgu0 1>; diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml index a2c55303810d..9593840a4a2b 100644 --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml @@ -53,7 +53,6 @@ examples: rtc@51 { compatible = "microcrystal,rv3032"; reg = <0x51>; - status = "okay"; pinctrl-0 = <&rtc_nint_pins>; interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>; trickle-resistor-ohms = <7000>; diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml index c8b57c7fd08c..ecae9fa8561b 100644 --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml @@ -35,7 +35,6 @@ examples: soc_ctrl0: soc-controller@f0000000 { compatible = "litex,soc-controller"; reg = <0xf0000000 0xc>; - status = "okay"; }; ... diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index 06e83461705c..f97132400bb6 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -180,7 +180,6 @@ examples: pinctrl-names = "default", "sleep"; pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; - status = "okay"; sai2a: audio-controller@4400b004 { #sound-dai-cells = <0>; @@ -190,7 +189,6 @@ examples: dma-names = "tx"; clocks = <&rcc SAI2_K>; clock-names = "sai_ck"; - status = "okay"; }; }; diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml index ec06789b21df..6806f53a4aed 100644 --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml @@ -127,8 +127,6 @@ examples: compatible = "ti,j721e-cpb-audio"; model = "j721e-cpb"; - status = "okay"; - ti,cpb-mcasp = <&mcasp10>; ti,cpb-codec = <&pcm3168a_1>; diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml index ee9f960de36b..859d369c71e2 100644 --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml @@ -119,8 +119,6 @@ examples: compatible = "ti,j721e-cpb-ivi-audio"; model = "j721e-cpb-ivi"; - status = "okay"; - ti,cpb-mcasp = <&mcasp10>; ti,cpb-codec = <&pcm3168a_1>;
There's no reason to have "status" properties in examples. "okay" is the default, and "disabled" turns off some schema checks ('required' specifically). Enabling qca,ar71xx causes a warning, so let's fix the node names: Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property From schema: schemas/phy/phy-provider.yaml Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Rui Miguel Silva <rmfrfs@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Robert Marko <robert.marko@sartura.hr> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com> Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Oleksij Rempel <o.rempel@pengutronix.de> Cc: ChiYuan Huang <cy_huang@richtek.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Dilip Kota <eswara.kota@linux.intel.com> Cc: Karol Gugala <kgugala@antmicro.com> Cc: Mateusz Holenko <mholenko@antmicro.com> Cc: Olivier Moysan <olivier.moysan@st.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by: Rob Herring <robh@kernel.org> --- .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 -- .../display/panel/boe,tv101wum-nl6.yaml | 1 - .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 -- .../bindings/media/renesas,drif.yaml | 1 - .../bindings/net/intel,dwmac-plat.yaml | 2 -- .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 -- .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 --- .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++--------------- .../regulator/richtek,rt6245-regulator.yaml | 1 - .../regulator/vqmmc-ipq4019-regulator.yaml | 1 - .../reset/hisilicon,hi3660-reset.yaml | 1 - .../bindings/reset/intel,rcu-gw.yaml | 1 - .../bindings/rtc/microcrystal,rv3032.yaml | 1 - .../soc/litex/litex,soc-controller.yaml | 1 - .../bindings/sound/st,stm32-sai.yaml | 2 -- .../bindings/sound/ti,j721e-cpb-audio.yaml | 2 -- .../sound/ti,j721e-cpb-ivi-audio.yaml | 2 -- 17 files changed, 5 insertions(+), 45 deletions(-)