diff mbox series

[10/13] x86/Swiotlb: Add Swiotlb bounce buffer remap function for HV IVM

Message ID 20210728145232.285861-11-ltykernel@gmail.com (mailing list archive)
State Superseded
Headers show
Series x86/Hyper-V: Add Hyper-V Isolation VM support | expand

Checks

Context Check Description
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Tianyu Lan July 28, 2021, 2:52 p.m. UTC
From: Tianyu Lan <Tianyu.Lan@microsoft.com>

In Isolation VM with AMD SEV, bounce buffer needs to be accessed via
extra address space which is above shared_gpa_boundary
(E.G 39 bit address line) reported by Hyper-V CPUID ISOLATION_CONFIG.
The access physical address will be original physical address +
shared_gpa_boundary. The shared_gpa_boundary in the AMD SEV SNP
spec is called virtual top of memory(vTOM). Memory addresses below
vTOM are automatically treated as private while memory above
vTOM is treated as shared.

Use dma_map_decrypted() in the swiotlb code, store remap address returned
and use the remap address to copy data from/to swiotlb bounce buffer.

Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
---
 include/linux/swiotlb.h |  4 ++++
 kernel/dma/swiotlb.c    | 11 ++++++++---
 2 files changed, 12 insertions(+), 3 deletions(-)

Comments

Konrad Rzeszutek Wilk July 29, 2021, 4:29 p.m. UTC | #1
On Wed, Jul 28, 2021 at 10:52:25AM -0400, Tianyu Lan wrote:
> From: Tianyu Lan <Tianyu.Lan@microsoft.com>
> 
> In Isolation VM with AMD SEV, bounce buffer needs to be accessed via
> extra address space which is above shared_gpa_boundary
> (E.G 39 bit address line) reported by Hyper-V CPUID ISOLATION_CONFIG.
> The access physical address will be original physical address +
> shared_gpa_boundary. The shared_gpa_boundary in the AMD SEV SNP
> spec is called virtual top of memory(vTOM). Memory addresses below
> vTOM are automatically treated as private while memory above
> vTOM is treated as shared.
> 
> Use dma_map_decrypted() in the swiotlb code, store remap address returned
> and use the remap address to copy data from/to swiotlb bounce buffer.
> 
> Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
> ---
>  include/linux/swiotlb.h |  4 ++++
>  kernel/dma/swiotlb.c    | 11 ++++++++---
>  2 files changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h
> index f507e3eacbea..584560ecaa8e 100644
> --- a/include/linux/swiotlb.h
> +++ b/include/linux/swiotlb.h
> @@ -72,6 +72,9 @@ extern enum swiotlb_force swiotlb_force;
>   * @end:	The end address of the swiotlb memory pool. Used to do a quick
>   *		range check to see if the memory was in fact allocated by this
>   *		API.
> + * @vaddr:	The vaddr of the swiotlb memory pool. The swiotlb
> + *		memory pool may be remapped in the memory encrypted case and store
> + *		virtual address for bounce buffer operation.
>   * @nslabs:	The number of IO TLB blocks (in groups of 64) between @start and
>   *		@end. For default swiotlb, this is command line adjustable via
>   *		setup_io_tlb_npages.
> @@ -89,6 +92,7 @@ extern enum swiotlb_force swiotlb_force;
>  struct io_tlb_mem {
>  	phys_addr_t start;
>  	phys_addr_t end;
> +	void *vaddr;
>  	unsigned long nslabs;
>  	unsigned long used;
>  	unsigned int index;
> diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
> index 1fa81c096c1d..6866e5784b53 100644
> --- a/kernel/dma/swiotlb.c
> +++ b/kernel/dma/swiotlb.c
> @@ -194,8 +194,13 @@ static void swiotlb_init_io_tlb_mem(struct io_tlb_mem *mem, phys_addr_t start,
>  		mem->slots[i].alloc_size = 0;
>  	}
>  
> -	set_memory_decrypted((unsigned long)vaddr, bytes >> PAGE_SHIFT);
> -	memset(vaddr, 0, bytes);
> +	mem->vaddr = dma_map_decrypted(vaddr, bytes);
> +	if (!mem->vaddr) {
> +		pr_err("Failed to decrypt memory.\n");

I am wondering if it would be worth returning an error code in this
function instead of just printing an error?

For this patch I think it is Ok, but perhaps going forward this would be
better done as I am thinking - is there some global guest->hyperv
reporting mechanism so that if this fails - it ends up being bubbled up
to the HyperV console-ish?

And ditto for other hypervisors?


> +		return;
> +	}
> +
> +	memset(mem->vaddr, 0, bytes);
>  }
>  
>  int __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)
> @@ -360,7 +365,7 @@ static void swiotlb_bounce(struct device *dev, phys_addr_t tlb_addr, size_t size
>  	phys_addr_t orig_addr = mem->slots[index].orig_addr;
>  	size_t alloc_size = mem->slots[index].alloc_size;
>  	unsigned long pfn = PFN_DOWN(orig_addr);
> -	unsigned char *vaddr = phys_to_virt(tlb_addr);
> +	unsigned char *vaddr = mem->vaddr + tlb_addr - mem->start;
>  	unsigned int tlb_offset;
>  
>  	if (orig_addr == INVALID_PHYS_ADDR)
> -- 
> 2.25.1
>
Tianyu Lan July 30, 2021, 4:10 a.m. UTC | #2
Hi Konrad:
      Thanks for your review.

On 7/30/2021 12:29 AM, Konrad Rzeszutek Wilk wrote:
>> diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
>> index 1fa81c096c1d..6866e5784b53 100644
>> --- a/kernel/dma/swiotlb.c
>> +++ b/kernel/dma/swiotlb.c
>> @@ -194,8 +194,13 @@ static void swiotlb_init_io_tlb_mem(struct io_tlb_mem *mem, phys_addr_t start,
>>   		mem->slots[i].alloc_size = 0;
>>   	}
>>   
>> -	set_memory_decrypted((unsigned long)vaddr, bytes >> PAGE_SHIFT);
>> -	memset(vaddr, 0, bytes);
>> +	mem->vaddr = dma_map_decrypted(vaddr, bytes);
>> +	if (!mem->vaddr) {
>> +		pr_err("Failed to decrypt memory.\n");
> I am wondering if it would be worth returning an error code in this
> function instead of just printing an error?

Yes, this is good idea and will update in the next version.

> 
> For this patch I think it is Ok, but perhaps going forward this would be
> better done as I am thinking - is there some global guest->hyperv
> reporting mechanism so that if this fails - it ends up being bubbled up
> to the HyperV console-ish?

Hyper-V has such panic page report mechanism. Guest can pass one page 
log to host during crash.
diff mbox series

Patch

diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h
index f507e3eacbea..584560ecaa8e 100644
--- a/include/linux/swiotlb.h
+++ b/include/linux/swiotlb.h
@@ -72,6 +72,9 @@  extern enum swiotlb_force swiotlb_force;
  * @end:	The end address of the swiotlb memory pool. Used to do a quick
  *		range check to see if the memory was in fact allocated by this
  *		API.
+ * @vaddr:	The vaddr of the swiotlb memory pool. The swiotlb
+ *		memory pool may be remapped in the memory encrypted case and store
+ *		virtual address for bounce buffer operation.
  * @nslabs:	The number of IO TLB blocks (in groups of 64) between @start and
  *		@end. For default swiotlb, this is command line adjustable via
  *		setup_io_tlb_npages.
@@ -89,6 +92,7 @@  extern enum swiotlb_force swiotlb_force;
 struct io_tlb_mem {
 	phys_addr_t start;
 	phys_addr_t end;
+	void *vaddr;
 	unsigned long nslabs;
 	unsigned long used;
 	unsigned int index;
diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
index 1fa81c096c1d..6866e5784b53 100644
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -194,8 +194,13 @@  static void swiotlb_init_io_tlb_mem(struct io_tlb_mem *mem, phys_addr_t start,
 		mem->slots[i].alloc_size = 0;
 	}
 
-	set_memory_decrypted((unsigned long)vaddr, bytes >> PAGE_SHIFT);
-	memset(vaddr, 0, bytes);
+	mem->vaddr = dma_map_decrypted(vaddr, bytes);
+	if (!mem->vaddr) {
+		pr_err("Failed to decrypt memory.\n");
+		return;
+	}
+
+	memset(mem->vaddr, 0, bytes);
 }
 
 int __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)
@@ -360,7 +365,7 @@  static void swiotlb_bounce(struct device *dev, phys_addr_t tlb_addr, size_t size
 	phys_addr_t orig_addr = mem->slots[index].orig_addr;
 	size_t alloc_size = mem->slots[index].alloc_size;
 	unsigned long pfn = PFN_DOWN(orig_addr);
-	unsigned char *vaddr = phys_to_virt(tlb_addr);
+	unsigned char *vaddr = mem->vaddr + tlb_addr - mem->start;
 	unsigned int tlb_offset;
 
 	if (orig_addr == INVALID_PHYS_ADDR)