| Message ID | 1627473242-35926-1-git-send-email-akhilpo@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v3,1/2] arm64: dts: qcom: sc7280: Add gpu support | expand |
Quoting Akhil P Oommen (2021-07-28 04:54:01) > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > index 029723a..c88f366 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > @@ -592,6 +593,85 @@ > qcom,bcm-voters = <&apps_bcm_voter>; > }; > > + gpu@3d00000 { > + compatible = "qcom,adreno-635.0", "qcom,adreno"; > + #stream-id-cells = <16>; > + reg = <0 0x03d00000 0 0x40000>, > + <0 0x03d9e000 0 0x1000>, > + <0 0x03d61000 0 0x800>; > + reg-names = "kgsl_3d0_reg_memory", > + "cx_mem", > + "cx_dbgc"; > + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; > + iommus = <&adreno_smmu 0 0x401>; > + operating-points-v2 = <&gpu_opp_table>; > + qcom,gmu = <&gmu>; > + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; > + interconnect-names = "gfx-mem"; > + > + gpu_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-550000000 { > + opp-hz = /bits/ 64 <550000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; > + opp-peak-kBps = <6832000>; > + }; > + > + opp-450000000 { Why is 450000000 after 550000000? Is it on purpose? If not intended please sort by frequency. > + opp-hz = /bits/ 64 <450000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; > + opp-peak-kBps = <4068000>; > + }; > + > + opp-315000000 { > + opp-hz = /bits/ 64 <315000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; > + opp-peak-kBps = <1804000>; > + }; > + }; > + }; > +
On Thu, Jul 29, 2021 at 10:19 AM Stephen Boyd <swboyd@chromium.org> wrote: > > Quoting Akhil P Oommen (2021-07-28 04:54:01) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > > index 029723a..c88f366 100644 > > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > > @@ -592,6 +593,85 @@ > > qcom,bcm-voters = <&apps_bcm_voter>; > > }; > > > > + gpu@3d00000 { > > + compatible = "qcom,adreno-635.0", "qcom,adreno"; > > + #stream-id-cells = <16>; > > + reg = <0 0x03d00000 0 0x40000>, > > + <0 0x03d9e000 0 0x1000>, > > + <0 0x03d61000 0 0x800>; > > + reg-names = "kgsl_3d0_reg_memory", > > + "cx_mem", > > + "cx_dbgc"; > > + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; > > + iommus = <&adreno_smmu 0 0x401>; > > + operating-points-v2 = <&gpu_opp_table>; > > + qcom,gmu = <&gmu>; > > + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; > > + interconnect-names = "gfx-mem"; > > + > > + gpu_opp_table: opp-table { > > + compatible = "operating-points-v2"; > > + > > + opp-550000000 { > > + opp-hz = /bits/ 64 <550000000>; > > + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; > > + opp-peak-kBps = <6832000>; > > + }; > > + > > + opp-450000000 { > > Why is 450000000 after 550000000? Is it on purpose? If not intended > please sort by frequency. We've used descending order, at least for gpu opp table, on other gens, fwiw.. not sure if that just means we were doing it wrong previously BR, -R > > > + opp-hz = /bits/ 64 <450000000>; > > + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; > > + opp-peak-kBps = <4068000>; > > + }; > > + > > + opp-315000000 { > > + opp-hz = /bits/ 64 <315000000>; > > + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; > > + opp-peak-kBps = <1804000>; > > + }; > > + }; > > + }; > > +
Quoting Rob Clark (2021-07-29 10:35:32) > On Thu, Jul 29, 2021 at 10:19 AM Stephen Boyd <swboyd@chromium.org> wrote: > > > > > > Why is 450000000 after 550000000? Is it on purpose? If not intended > > please sort by frequency. > > We've used descending order, at least for gpu opp table, on other > gens, fwiw.. not sure if that just means we were doing it wrong > previously > Ah I missed that. I don't think one way or the other is mandated, but we're already sorting other OPP tables in the qcom dtsi files in ascending so this is the only one that is different.
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 029723a..c88f366 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/clock/qcom,gcc-sc7280.h> +#include <dt-bindings/clock/qcom,gpucc-sc7280.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interconnect/qcom,sc7280.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -592,6 +593,85 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + gpu@3d00000 { + compatible = "qcom,adreno-635.0", "qcom,adreno"; + #stream-id-cells = <16>; + reg = <0 0x03d00000 0 0x40000>, + <0 0x03d9e000 0 0x1000>, + <0 0x03d61000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&adreno_smmu 0 0x401>; + operating-points-v2 = <&gpu_opp_table>; + qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <6832000>; + }; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <4068000>; + }; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <1804000>; + }; + }; + }; + + gmu: gmu@3d69000 { + compatible="qcom,adreno-gmu-635.0", "qcom,adreno-gmu"; + reg = <0 0x03d6a000 0 0x34000>, + <0 0x3de0000 0 0x10000>, + <0 0x0b290000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>; + clock-names = "gmu", + "cxo", + "axi", + "memnoc", + "ahb", + "hub", + "smmu_vote"; + power-domains = <&gpucc GPU_CC_CX_GDSC>, + <&gpucc GPU_CC_GX_GDSC>; + power-domain-names = "cx", + "gx"; + iommus = <&adreno_smmu 5 0x400>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + gpucc: clock-controller@3d90000 { compatible = "qcom,sc7280-gpucc"; reg = <0 0x03d90000 0 0x9000>; @@ -606,6 +686,42 @@ #power-domain-cells = <1>; }; + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + + power-domains = <&gpucc GPU_CC_CX_GDSC>; + }; + stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x06002000 0 0x1000>,
Add the necessary dt nodes for gpu support in sc7280. Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> --- This has dependency on the below GPUCC bindings patch which is already accepted in clk-next: https://patchwork.kernel.org/project/linux-clk/list/?series=514831&state=%2A&archive=both Changes in v3: - Re-ordered the nodes based on address (Stephan) - Added the patch for gpu cooling to the stack. Changes in v2: - formatting update and removed a duplicate header (Stephan) arch/arm64/boot/dts/qcom/sc7280.dtsi | 116 +++++++++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+)