| Message ID | 20210727152512.1098329-7-thara.gopinath@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Introduce LMh driver for Qualcomm SoCs | expand |
On Tue, 27 Jul 2021 11:25:12 -0400, Thara Gopinath wrote: > Add dt binding documentation to describe Qualcomm > Limits Management Hardware node. > > Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> > --- > > v3->v4: > - Changed dt property qcom,lmh-cpu-id to qcom,lmh-cpu and made it > a phandle pointing to the cpu node instead of a number as per > Rob Herring's review comments. > - Added suffix -millicelsius to all temperature properties as per > Rob Herring's review comments. > - Dropped unnecessary #includes in the example as pointed out by Bjorn. > - Other minor fixes. > > .../devicetree/bindings/thermal/qcom-lmh.yaml | 100 ++++++++++++++++++ > 1 file changed, 100 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/qcom-lmh.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml: required:3: None is not of type 'string' from schema $id: http://json-schema.org/draft-07/schema# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml: ignoring, error in schema: required: 3 warning: no schema found in file: ./Documentation/devicetree/bindings/thermal/qcom-lmh.yaml Documentation/devicetree/bindings/thermal/qcom-lmh.example.dt.yaml:0:0: /example-0/lmh@17d70800: failed to match any schema with compatible: ['qcom,sdm845-lmh'] Documentation/devicetree/bindings/thermal/qcom-lmh.example.dt.yaml:0:0: /example-1/lmh@17d78800: failed to match any schema with compatible: ['qcom,sdm845-lmh'] \ndoc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1510556 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Tue, Jul 27, 2021 at 11:25:12AM -0400, Thara Gopinath wrote: > Add dt binding documentation to describe Qualcomm > Limits Management Hardware node. > > Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> > --- > > v3->v4: > - Changed dt property qcom,lmh-cpu-id to qcom,lmh-cpu and made it > a phandle pointing to the cpu node instead of a number as per > Rob Herring's review comments. > - Added suffix -millicelsius to all temperature properties as per > Rob Herring's review comments. > - Dropped unnecessary #includes in the example as pointed out by Bjorn. > - Other minor fixes. > > .../devicetree/bindings/thermal/qcom-lmh.yaml | 100 ++++++++++++++++++ > 1 file changed, 100 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/qcom-lmh.yaml > > diff --git a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml > new file mode 100644 > index 000000000000..0978f458b9ec > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml > @@ -0,0 +1,100 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright 2021 Linaro Ltd. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/thermal/qcom-lmh.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Limits Management Hardware(LMh) > + > +maintainers: > + - Thara Gopinath <thara.gopinath@linaro.org> > + > +description: > + Limits Management Hardware(LMh) is a hardware infrastructure on some > + Qualcomm SoCs that can enforce temperature and current limits as > + programmed by software for certain IPs like CPU. > + > +properties: > + compatible: > + enum: > + - qcom,sdm845-lmh > + > + reg: > + items: > + - description: core registers > + > + interrupts: > + maxItems: 1 > + > + '#interrupt-cells': > + const: 1 > + > + interrupt-controller: true > + > + qcom,lmh-cpu: > + description: > + phandle of the first cpu in the LMh cluster > + $ref: /schemas/types.yaml#/definitions/phandle 'cpus' property is the somewhat standard way to reference a cpu. But you should already have cpu topology information, why do you need this? > + > + qcom,lmh-temp-arm-millicelsius: > + description: > + An integer expressing temperature threshold at which the LMh thermal > + FSM is engaged. > + $ref: /schemas/types.yaml#/definitions/int32 Standard unit-suffixes already have a type. > + > + qcom,lmh-temp-low-millicelsius: > + description: > + An integer expressing temperature threshold at which the state machine > + will attempt to remove frequency throttling. > + $ref: /schemas/types.yaml#/definitions/int32 > + > + qcom,lmh-temp-high-millicelsius: > + description: > + An integer expressing temperature threshold at which the state machine > + will attempt to throttle the frequency. > + $ref: /schemas/types.yaml#/definitions/int32 > + > +required: > + - compatible > + - reg > + - interrupts > + - #interrupt-cells > + - interrupt-controller > + - qcom,lmh-cpu > + - qcom,lmh-temp-arm-millicelsius > + - qcom,lmh-temp-low-millicelsius > + - qcom,lmh-temp-high-millicelsius > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + lmh_cluster1: lmh@17d70800 { Drop unused labels. > + compatible = "qcom,sdm845-lmh"; > + reg = <0x17d70800 0x401>; 0x401 is an odd size... > + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; > + qcom,lmh-cpu = <&CPU4>; > + qcom,lmh-temp-arm-millicelsius = <65000>; > + qcom,lmh-temp-low-millicelsius = <94500>; > + qcom,lmh-temp-high-millicelsius = <95000>; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + - | Seems like this is 1 example, not 2. > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + lmh_cluster0: lmh@17d78800 { > + compatible = "qcom,sdm845-lmh"; > + reg = <0x17d78800 0x401>; > + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; > + qcom,lmh-cpu = <&CPU0>; > + qcom,lmh-temp-arm-millicelsius = <65000>; > + qcom,lmh-temp-low-millicelsius = <94500>; > + qcom,lmh-temp-high-millicelsius = <95000>; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + - | > -- > 2.25.1 > >
Hi Rob, Thanks for the reviews. On 7/28/21 12:10 PM, Rob Herring wrote: > On Tue, Jul 27, 2021 at 11:25:12AM -0400, Thara Gopinath wrote: >> Add dt binding documentation to describe Qualcomm >> Limits Management Hardware node. >> >> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> >> --- >> >> v3->v4: >> - Changed dt property qcom,lmh-cpu-id to qcom,lmh-cpu and made it >> a phandle pointing to the cpu node instead of a number as per >> Rob Herring's review comments. >> - Added suffix -millicelsius to all temperature properties as per >> Rob Herring's review comments. >> - Dropped unnecessary #includes in the example as pointed out by Bjorn. >> - Other minor fixes. >> >> .../devicetree/bindings/thermal/qcom-lmh.yaml | 100 ++++++++++++++++++ >> 1 file changed, 100 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/thermal/qcom-lmh.yaml >> >> diff --git a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml >> new file mode 100644 >> index 000000000000..0978f458b9ec >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml >> @@ -0,0 +1,100 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +# Copyright 2021 Linaro Ltd. >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/thermal/qcom-lmh.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm Limits Management Hardware(LMh) >> + >> +maintainers: >> + - Thara Gopinath <thara.gopinath@linaro.org> >> + >> +description: >> + Limits Management Hardware(LMh) is a hardware infrastructure on some >> + Qualcomm SoCs that can enforce temperature and current limits as >> + programmed by software for certain IPs like CPU. >> + >> +properties: >> + compatible: >> + enum: >> + - qcom,sdm845-lmh >> + >> + reg: >> + items: >> + - description: core registers >> + >> + interrupts: >> + maxItems: 1 >> + >> + '#interrupt-cells': >> + const: 1 >> + >> + interrupt-controller: true >> + >> + qcom,lmh-cpu: >> + description: >> + phandle of the first cpu in the LMh cluster >> + $ref: /schemas/types.yaml#/definitions/phandle > > 'cpus' property is the somewhat standard way to reference a cpu. So are you suggesting renaming qcom,lmh-cpu to cpus ? I need the cpu-id here to identify the LMh cluster. Depending on the LMh cluster, I have different node ids which is a parameter in the LMh smc call. > > But you should already have cpu topology information, why do you need > this? > >> + >> + qcom,lmh-temp-arm-millicelsius: >> + description: >> + An integer expressing temperature threshold at which the LMh thermal >> + FSM is engaged. >> + $ref: /schemas/types.yaml#/definitions/int32 > > Standard unit-suffixes already have a type. yep.. I will remove this > >> + >> + qcom,lmh-temp-low-millicelsius: >> + description: >> + An integer expressing temperature threshold at which the state machine >> + will attempt to remove frequency throttling. >> + $ref: /schemas/types.yaml#/definitions/int32 >> + >> + qcom,lmh-temp-high-millicelsius: >> + description: >> + An integer expressing temperature threshold at which the state machine >> + will attempt to throttle the frequency. >> + $ref: /schemas/types.yaml#/definitions/int32 >> + >> +required: >> + - compatible >> + - reg >> + - interrupts >> + - #interrupt-cells >> + - interrupt-controller >> + - qcom,lmh-cpu >> + - qcom,lmh-temp-arm-millicelsius >> + - qcom,lmh-temp-low-millicelsius >> + - qcom,lmh-temp-high-millicelsius >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/interrupt-controller/arm-gic.h> >> + >> + lmh_cluster1: lmh@17d70800 { > > Drop unused labels. sure. > >> + compatible = "qcom,sdm845-lmh"; >> + reg = <0x17d70800 0x401>; > > 0x401 is an odd size... I double checked the spec and this is the size. But also there is no register specified around this address. So I will make the size to 0x400 so that it looks sane. > >> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; >> + qcom,lmh-cpu = <&CPU4>; >> + qcom,lmh-temp-arm-millicelsius = <65000>; >> + qcom,lmh-temp-low-millicelsius = <94500>; >> + qcom,lmh-temp-high-millicelsius = <95000>; >> + interrupt-controller; >> + #interrupt-cells = <1>; >> + }; >> + - | > > Seems like this is 1 example, not 2. Will fix it. > >> + #include <dt-bindings/interrupt-controller/arm-gic.h> >> + >> + lmh_cluster0: lmh@17d78800 { >> + compatible = "qcom,sdm845-lmh"; >> + reg = <0x17d78800 0x401>; >> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; >> + qcom,lmh-cpu = <&CPU0>; >> + qcom,lmh-temp-arm-millicelsius = <65000>; >> + qcom,lmh-temp-low-millicelsius = <94500>; >> + qcom,lmh-temp-high-millicelsius = <95000>; >> + interrupt-controller; >> + #interrupt-cells = <1>; >> + }; >> + - | >> -- >> 2.25.1 >> >>
diff --git a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml new file mode 100644 index 000000000000..0978f458b9ec --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2021 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/qcom-lmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Limits Management Hardware(LMh) + +maintainers: + - Thara Gopinath <thara.gopinath@linaro.org> + +description: + Limits Management Hardware(LMh) is a hardware infrastructure on some + Qualcomm SoCs that can enforce temperature and current limits as + programmed by software for certain IPs like CPU. + +properties: + compatible: + enum: + - qcom,sdm845-lmh + + reg: + items: + - description: core registers + + interrupts: + maxItems: 1 + + '#interrupt-cells': + const: 1 + + interrupt-controller: true + + qcom,lmh-cpu: + description: + phandle of the first cpu in the LMh cluster + $ref: /schemas/types.yaml#/definitions/phandle + + qcom,lmh-temp-arm-millicelsius: + description: + An integer expressing temperature threshold at which the LMh thermal + FSM is engaged. + $ref: /schemas/types.yaml#/definitions/int32 + + qcom,lmh-temp-low-millicelsius: + description: + An integer expressing temperature threshold at which the state machine + will attempt to remove frequency throttling. + $ref: /schemas/types.yaml#/definitions/int32 + + qcom,lmh-temp-high-millicelsius: + description: + An integer expressing temperature threshold at which the state machine + will attempt to throttle the frequency. + $ref: /schemas/types.yaml#/definitions/int32 + +required: + - compatible + - reg + - interrupts + - #interrupt-cells + - interrupt-controller + - qcom,lmh-cpu + - qcom,lmh-temp-arm-millicelsius + - qcom,lmh-temp-low-millicelsius + - qcom,lmh-temp-high-millicelsius + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + lmh_cluster1: lmh@17d70800 { + compatible = "qcom,sdm845-lmh"; + reg = <0x17d70800 0x401>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + qcom,lmh-cpu = <&CPU4>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + lmh_cluster0: lmh@17d78800 { + compatible = "qcom,sdm845-lmh"; + reg = <0x17d78800 0x401>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + qcom,lmh-cpu = <&CPU0>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + - |
Add dt binding documentation to describe Qualcomm Limits Management Hardware node. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> --- v3->v4: - Changed dt property qcom,lmh-cpu-id to qcom,lmh-cpu and made it a phandle pointing to the cpu node instead of a number as per Rob Herring's review comments. - Added suffix -millicelsius to all temperature properties as per Rob Herring's review comments. - Dropped unnecessary #includes in the example as pointed out by Bjorn. - Other minor fixes. .../devicetree/bindings/thermal/qcom-lmh.yaml | 100 ++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/qcom-lmh.yaml