| Message ID | 20200821035420.380495-40-robh@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | PCI: dwc: Driver clean-ups | expand |
On 8/21/2020 9:24 AM, Rob Herring wrote: > The Designware controller has common registers to set number of fast > training sequence ordered sets. The Artpec6, Intel, and Tegra driver > initialize these register fields. Let's move the initialization to the > common setup code and drivers just have to provide the value. > > There's a slight change in that the common clock mode N_FTS field is > now initialized. Previously only the Intel driver set this. It's not > clear from the code if common clock mode is used in the Artpec6 or Tegra > driver. It depends on the DWC configuration. Given the field is not > initialized while the others are, it seems unlikely common clock mode > is used. > > Cc: Jesper Nilsson <jesper.nilsson@axis.com> > Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Jingoo Han <jingoohan1@gmail.com> > Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Jonathan Hunter <jonathanh@nvidia.com> > Cc: linux-tegra@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > drivers/pci/controller/dwc/pcie-artpec6.c | 37 +++----------------- > drivers/pci/controller/dwc/pcie-designware.c | 28 +++++++++------ > drivers/pci/controller/dwc/pcie-designware.h | 3 +- > drivers/pci/controller/dwc/pcie-intel-gw.c | 27 +++++--------- > drivers/pci/controller/dwc/pcie-tegra194.c | 25 ++----------- > 5 files changed, 35 insertions(+), 85 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pcie-artpec6.c b/drivers/pci/controller/dwc/pcie-artpec6.c > index 86f4d66d8587..929448e9e0bc 100644 > --- a/drivers/pci/controller/dwc/pcie-artpec6.c > +++ b/drivers/pci/controller/dwc/pcie-artpec6.c > @@ -44,13 +44,6 @@ struct artpec_pcie_of_data { > > static const struct of_device_id artpec6_pcie_of_match[]; > > -/* PCIe Port Logic registers (memory-mapped) */ > -#define PL_OFFSET 0x700 > - > -#define ACK_F_ASPM_CTRL_OFF (PL_OFFSET + 0xc) > -#define ACK_N_FTS_MASK GENMASK(15, 8) > -#define ACK_N_FTS(x) (((x) << 8) & ACK_N_FTS_MASK) > - > /* ARTPEC-6 specific registers */ > #define PCIECFG 0x18 > #define PCIECFG_DBG_OEN BIT(24) > @@ -289,30 +282,6 @@ static void artpec6_pcie_init_phy(struct artpec6_pcie *artpec6_pcie) > } > } > > -static void artpec6_pcie_set_nfts(struct artpec6_pcie *artpec6_pcie) > -{ > - struct dw_pcie *pci = artpec6_pcie->pci; > - u32 val; > - > - if (artpec6_pcie->variant != ARTPEC7) > - return; > - > - /* > - * Increase the N_FTS (Number of Fast Training Sequences) > - * to be transmitted when transitioning from L0s to L0. > - */ > - val = dw_pcie_readl_dbi(pci, ACK_F_ASPM_CTRL_OFF); > - val &= ~ACK_N_FTS_MASK; > - val |= ACK_N_FTS(180); > - dw_pcie_writel_dbi(pci, ACK_F_ASPM_CTRL_OFF, val); > - > - /* > - * Set the Number of Fast Training Sequences that the core > - * advertises as its N_FTS during Gen2 or Gen3 link training. > - */ > - dw_pcie_link_set_n_fts(pci, 180); > -} > - > static void artpec6_pcie_assert_core_reset(struct artpec6_pcie *artpec6_pcie) > { > u32 val; > @@ -351,11 +320,14 @@ static int artpec6_pcie_host_init(struct pcie_port *pp) > struct dw_pcie *pci = to_dw_pcie_from_pp(pp); > struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci); > > + if (artpec6_pcie->variant == ARTPEC7) { > + pci->n_fts[0] = 180; > + pci->n_fts[1] = 180; > + } > artpec6_pcie_assert_core_reset(artpec6_pcie); > artpec6_pcie_init_phy(artpec6_pcie); > artpec6_pcie_deassert_core_reset(artpec6_pcie); > artpec6_pcie_wait_for_phy(artpec6_pcie); > - artpec6_pcie_set_nfts(artpec6_pcie); > dw_pcie_setup_rc(pp); > artpec6_pcie_establish_link(pci); > dw_pcie_wait_for_link(pci); > @@ -403,7 +375,6 @@ static void artpec6_pcie_ep_init(struct dw_pcie_ep *ep) > artpec6_pcie_init_phy(artpec6_pcie); > artpec6_pcie_deassert_core_reset(artpec6_pcie); > artpec6_pcie_wait_for_phy(artpec6_pcie); > - artpec6_pcie_set_nfts(artpec6_pcie); > > for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) > dw_pcie_ep_reset_bar(pci, bar); > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c > index 61e1faba15bf..3cb21247619c 100644 > --- a/drivers/pci/controller/dwc/pcie-designware.c > +++ b/drivers/pci/controller/dwc/pcie-designware.c > @@ -510,17 +510,6 @@ static void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen) > } > EXPORT_SYMBOL_GPL(dw_pcie_link_set_max_speed); > > -void dw_pcie_link_set_n_fts(struct dw_pcie *pci, u32 n_fts) > -{ > - u32 val; > - > - val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); > - val &= ~PORT_LOGIC_N_FTS_MASK; > - val |= n_fts & PORT_LOGIC_N_FTS_MASK; > - dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val); > -} > -EXPORT_SYMBOL_GPL(dw_pcie_link_set_n_fts); > - > static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) > { > u32 val; > @@ -551,6 +540,23 @@ void dw_pcie_setup(struct dw_pcie *pci) > if (pci->link_gen > 0) > dw_pcie_link_set_max_speed(pci, pci->link_gen); > > + /* Configure Gen1 N_FTS */ > + if (pci->n_fts[0]) { > + val = dw_pcie_readl_dbi(pci, PCIE_PORT_AFR); > + val &= ~(PORT_AFR_N_FTS_MASK | PORT_AFR_CC_N_FTS_MASK); > + val |= PORT_AFR_N_FTS(pci->n_fts[0]); > + val |= PORT_AFR_CC_N_FTS(pci->n_fts[0]); > + dw_pcie_writel_dbi(pci, PCIE_PORT_AFR, val); > + } > + > + /* Configure Gen2+ N_FTS */ > + if (pci->n_fts[1]) { > + val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); > + val &= ~PORT_LOGIC_N_FTS_MASK; > + val |= pci->n_fts[pci->link_gen - 1]; Apologies for getting late to this change given that the change has already been merged. I'm wondering why is it that link_gen has to be used in deriving the index instead of directly using '1' as the index? Infact the for link speed greater than 2, accesses go beyond n_fts[] array boundaries. Since the if() check is done based on a non-zero value of pci->n_fts[1], shouldn't the same be used for programming also? - Vidya Sagar > + dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val); > + } > + > val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL); > val &= ~PORT_LINK_FAST_LINK_MODE; > val |= PORT_LINK_DLL_LINK_EN; > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h > index 0b48298362cd..d8771db247f4 100644 > --- a/drivers/pci/controller/dwc/pcie-designware.h > +++ b/drivers/pci/controller/dwc/pcie-designware.h > @@ -34,6 +34,7 @@ > #define PORT_AFR_N_FTS_MASK GENMASK(15, 8) > #define PORT_AFR_N_FTS(n) FIELD_PREP(PORT_AFR_N_FTS_MASK, n) > #define PORT_AFR_CC_N_FTS_MASK GENMASK(23, 16) > +#define PORT_AFR_CC_N_FTS(n) FIELD_PREP(PORT_AFR_CC_N_FTS_MASK, n) > #define PORT_AFR_ENTER_ASPM BIT(30) > #define PORT_AFR_L0S_ENTRANCE_LAT_SHIFT 24 > #define PORT_AFR_L0S_ENTRANCE_LAT_MASK GENMASK(26, 24) > @@ -253,6 +254,7 @@ struct dw_pcie { > unsigned int version; > int num_lanes; > int link_gen; > + u8 n_fts[2]; > }; > > #define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp) > @@ -271,7 +273,6 @@ void dw_pcie_write_dbi(struct dw_pcie *pci, u32 reg, size_t size, u32 val); > void dw_pcie_write_dbi2(struct dw_pcie *pci, u32 reg, size_t size, u32 val); > int dw_pcie_link_up(struct dw_pcie *pci); > void dw_pcie_upconfig_setup(struct dw_pcie *pci); > -void dw_pcie_link_set_n_fts(struct dw_pcie *pci, u32 n_fts); > int dw_pcie_wait_for_link(struct dw_pcie *pci); > void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, > int type, u64 cpu_addr, u64 pci_addr, > diff --git a/drivers/pci/controller/dwc/pcie-intel-gw.c b/drivers/pci/controller/dwc/pcie-intel-gw.c > index 333f11561807..5650cb78acba 100644 > --- a/drivers/pci/controller/dwc/pcie-intel-gw.c > +++ b/drivers/pci/controller/dwc/pcie-intel-gw.c > @@ -67,7 +67,6 @@ struct intel_pcie_port { > void __iomem *app_base; > struct gpio_desc *reset_gpio; > u32 rst_intrvl; > - u32 n_fts; > struct clk *core_clk; > struct reset_control *core_rst; > struct phy *phy; > @@ -138,37 +137,29 @@ static void intel_pcie_link_setup(struct intel_pcie_port *lpp) > pcie_rc_cfg_wr(lpp, offset + PCI_EXP_LNKCTL, val); > } > > -static void intel_pcie_port_logic_setup(struct intel_pcie_port *lpp) > +static void intel_pcie_init_n_fts(struct dw_pcie *pci) > { > - u32 val, mask; > - struct dw_pcie *pci = &lpp->pci; > - > - switch (pcie_link_speed[pci->link_gen]) { > - case PCIE_SPEED_8_0GT: > - lpp->n_fts = PORT_AFR_N_FTS_GEN3; > + switch (pci->link_gen) { > + case 3: > + pci->n_fts[1] = PORT_AFR_N_FTS_GEN3; > break; > - case PCIE_SPEED_16_0GT: > - lpp->n_fts = PORT_AFR_N_FTS_GEN4; > + case 4: > + pci->n_fts[1] = PORT_AFR_N_FTS_GEN4; > break; > default: > - lpp->n_fts = PORT_AFR_N_FTS_GEN12_DFT; > + pci->n_fts[1] = PORT_AFR_N_FTS_GEN12_DFT; > break; > } > - > - mask = PORT_AFR_N_FTS_MASK | PORT_AFR_CC_N_FTS_MASK; > - val = FIELD_PREP(PORT_AFR_N_FTS_MASK, lpp->n_fts) | > - FIELD_PREP(PORT_AFR_CC_N_FTS_MASK, lpp->n_fts); > - pcie_rc_cfg_wr_mask(lpp, PCIE_PORT_AFR, mask, val); > + pci->n_fts[0] = PORT_AFR_N_FTS_GEN12_DFT; > } > > static void intel_pcie_rc_setup(struct intel_pcie_port *lpp) > { > intel_pcie_ltssm_disable(lpp); > intel_pcie_link_setup(lpp); > + intel_pcie_init_n_fts(&lpp->pci); > dw_pcie_setup_rc(&lpp->pci.pp); > dw_pcie_upconfig_setup(&lpp->pci); > - intel_pcie_port_logic_setup(lpp); > - dw_pcie_link_set_n_fts(&lpp->pci, lpp->n_fts); > } > > static int intel_pcie_ep_rst_init(struct intel_pcie_port *lpp) > diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c > index 91ef4b3e860d..1560c449757d 100644 > --- a/drivers/pci/controller/dwc/pcie-tegra194.c > +++ b/drivers/pci/controller/dwc/pcie-tegra194.c > @@ -881,17 +881,6 @@ static void tegra_pcie_prepare_host(struct pcie_port *pp) > > dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0); > > - /* Configure FTS */ > - val = dw_pcie_readl_dbi(pci, PCIE_PORT_AFR); > - val &= ~PORT_AFR_N_FTS_MASK; > - val |= PORT_AFR_N_FTS(N_FTS_VAL); > - dw_pcie_writel_dbi(pci, PCIE_PORT_AFR, val); > - > - val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); > - val &= ~PORT_LOGIC_N_FTS_MASK; > - val |= FTS_VAL; > - dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val); > - > /* Enable as 0xFFFF0001 response for CRS */ > val = dw_pcie_readl_dbi(pci, PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT); > val &= ~(AMBA_ERROR_RESPONSE_CRS_MASK << AMBA_ERROR_RESPONSE_CRS_SHIFT); > @@ -1794,17 +1783,6 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie) > val &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL; > dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, val); > > - /* Configure N_FTS & FTS */ > - val = dw_pcie_readl_dbi(pci, PCIE_PORT_AFR); > - val &= ~PORT_AFR_N_FTS_MASK; > - val |= PORT_AFR_N_FTS(FTS_VAL); > - dw_pcie_writel_dbi(pci, PCIE_PORT_AFR, val); > - > - val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); > - val &= ~PORT_LOGIC_N_FTS_MASK; > - val |= FTS_VAL; > - dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val); > - > pcie->pcie_cap_base = dw_pcie_find_capability(&pcie->pci, > PCI_CAP_ID_EXP); > clk_set_rate(pcie->core_clk, GEN4_CORE_CLK_FREQ); > @@ -2033,6 +2011,9 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev) > pci = &pcie->pci; > pci->dev = &pdev->dev; > pci->ops = &tegra_dw_pcie_ops; > + pci->n_fts[0] = N_FTS_VAL; > + pci->n_fts[1] = FTS_VAL; > + > pp = &pci->pp; > pcie->dev = &pdev->dev; > pcie->mode = (enum dw_pcie_device_mode)data->mode; >
On Sun, Aug 8, 2021 at 9:01 AM Vidya Sagar <vidyas@nvidia.com> wrote: > > > > On 8/21/2020 9:24 AM, Rob Herring wrote: > > The Designware controller has common registers to set number of fast > > training sequence ordered sets. The Artpec6, Intel, and Tegra driver > > initialize these register fields. Let's move the initialization to the > > common setup code and drivers just have to provide the value. > > > > There's a slight change in that the common clock mode N_FTS field is > > now initialized. Previously only the Intel driver set this. It's not > > clear from the code if common clock mode is used in the Artpec6 or Tegra > > driver. It depends on the DWC configuration. Given the field is not > > initialized while the others are, it seems unlikely common clock mode > > is used. > > > > Cc: Jesper Nilsson <jesper.nilsson@axis.com> > > Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > Cc: Bjorn Helgaas <bhelgaas@google.com> > > Cc: Jingoo Han <jingoohan1@gmail.com> > > Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> > > Cc: Thierry Reding <thierry.reding@gmail.com> > > Cc: Jonathan Hunter <jonathanh@nvidia.com> > > Cc: linux-tegra@vger.kernel.org > > Signed-off-by: Rob Herring <robh@kernel.org> > > --- > > drivers/pci/controller/dwc/pcie-artpec6.c | 37 +++----------------- > > drivers/pci/controller/dwc/pcie-designware.c | 28 +++++++++------ > > drivers/pci/controller/dwc/pcie-designware.h | 3 +- > > drivers/pci/controller/dwc/pcie-intel-gw.c | 27 +++++--------- > > drivers/pci/controller/dwc/pcie-tegra194.c | 25 ++----------- > > 5 files changed, 35 insertions(+), 85 deletions(-) > > > > diff --git a/drivers/pci/controller/dwc/pcie-artpec6.c b/drivers/pci/controller/dwc/pcie-artpec6.c > > index 86f4d66d8587..929448e9e0bc 100644 > > --- a/drivers/pci/controller/dwc/pcie-artpec6.c > > +++ b/drivers/pci/controller/dwc/pcie-artpec6.c > > @@ -44,13 +44,6 @@ struct artpec_pcie_of_data { > > > > static const struct of_device_id artpec6_pcie_of_match[]; > > > > -/* PCIe Port Logic registers (memory-mapped) */ > > -#define PL_OFFSET 0x700 > > - > > -#define ACK_F_ASPM_CTRL_OFF (PL_OFFSET + 0xc) > > -#define ACK_N_FTS_MASK GENMASK(15, 8) > > -#define ACK_N_FTS(x) (((x) << 8) & ACK_N_FTS_MASK) > > - > > /* ARTPEC-6 specific registers */ > > #define PCIECFG 0x18 > > #define PCIECFG_DBG_OEN BIT(24) > > @@ -289,30 +282,6 @@ static void artpec6_pcie_init_phy(struct artpec6_pcie *artpec6_pcie) > > } > > } > > > > -static void artpec6_pcie_set_nfts(struct artpec6_pcie *artpec6_pcie) > > -{ > > - struct dw_pcie *pci = artpec6_pcie->pci; > > - u32 val; > > - > > - if (artpec6_pcie->variant != ARTPEC7) > > - return; > > - > > - /* > > - * Increase the N_FTS (Number of Fast Training Sequences) > > - * to be transmitted when transitioning from L0s to L0. > > - */ > > - val = dw_pcie_readl_dbi(pci, ACK_F_ASPM_CTRL_OFF); > > - val &= ~ACK_N_FTS_MASK; > > - val |= ACK_N_FTS(180); > > - dw_pcie_writel_dbi(pci, ACK_F_ASPM_CTRL_OFF, val); > > - > > - /* > > - * Set the Number of Fast Training Sequences that the core > > - * advertises as its N_FTS during Gen2 or Gen3 link training. > > - */ > > - dw_pcie_link_set_n_fts(pci, 180); > > -} > > - > > static void artpec6_pcie_assert_core_reset(struct artpec6_pcie *artpec6_pcie) > > { > > u32 val; > > @@ -351,11 +320,14 @@ static int artpec6_pcie_host_init(struct pcie_port *pp) > > struct dw_pcie *pci = to_dw_pcie_from_pp(pp); > > struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci); > > > > + if (artpec6_pcie->variant == ARTPEC7) { > > + pci->n_fts[0] = 180; > > + pci->n_fts[1] = 180; > > + } > > artpec6_pcie_assert_core_reset(artpec6_pcie); > > artpec6_pcie_init_phy(artpec6_pcie); > > artpec6_pcie_deassert_core_reset(artpec6_pcie); > > artpec6_pcie_wait_for_phy(artpec6_pcie); > > - artpec6_pcie_set_nfts(artpec6_pcie); > > dw_pcie_setup_rc(pp); > > artpec6_pcie_establish_link(pci); > > dw_pcie_wait_for_link(pci); > > @@ -403,7 +375,6 @@ static void artpec6_pcie_ep_init(struct dw_pcie_ep *ep) > > artpec6_pcie_init_phy(artpec6_pcie); > > artpec6_pcie_deassert_core_reset(artpec6_pcie); > > artpec6_pcie_wait_for_phy(artpec6_pcie); > > - artpec6_pcie_set_nfts(artpec6_pcie); > > > > for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) > > dw_pcie_ep_reset_bar(pci, bar); > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c > > index 61e1faba15bf..3cb21247619c 100644 > > --- a/drivers/pci/controller/dwc/pcie-designware.c > > +++ b/drivers/pci/controller/dwc/pcie-designware.c > > @@ -510,17 +510,6 @@ static void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen) > > } > > EXPORT_SYMBOL_GPL(dw_pcie_link_set_max_speed); > > > > -void dw_pcie_link_set_n_fts(struct dw_pcie *pci, u32 n_fts) > > -{ > > - u32 val; > > - > > - val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); > > - val &= ~PORT_LOGIC_N_FTS_MASK; > > - val |= n_fts & PORT_LOGIC_N_FTS_MASK; > > - dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val); > > -} > > -EXPORT_SYMBOL_GPL(dw_pcie_link_set_n_fts); > > - > > static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) > > { > > u32 val; > > @@ -551,6 +540,23 @@ void dw_pcie_setup(struct dw_pcie *pci) > > if (pci->link_gen > 0) > > dw_pcie_link_set_max_speed(pci, pci->link_gen); > > > > + /* Configure Gen1 N_FTS */ > > + if (pci->n_fts[0]) { > > + val = dw_pcie_readl_dbi(pci, PCIE_PORT_AFR); > > + val &= ~(PORT_AFR_N_FTS_MASK | PORT_AFR_CC_N_FTS_MASK); > > + val |= PORT_AFR_N_FTS(pci->n_fts[0]); > > + val |= PORT_AFR_CC_N_FTS(pci->n_fts[0]); > > + dw_pcie_writel_dbi(pci, PCIE_PORT_AFR, val); > > + } > > + > > + /* Configure Gen2+ N_FTS */ > > + if (pci->n_fts[1]) { > > + val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); > > + val &= ~PORT_LOGIC_N_FTS_MASK; > > + val |= pci->n_fts[pci->link_gen - 1]; > Apologies for getting late to this change given that the change has > already been merged. > I'm wondering why is it that link_gen has to be used in deriving the > index instead of directly using '1' as the index? > Infact the for link speed greater than 2, accesses go beyond n_fts[] > array boundaries. > Since the if() check is done based on a non-zero value of pci->n_fts[1], > shouldn't the same be used for programming also? Yes, I think you are right. Rob
diff --git a/drivers/pci/controller/dwc/pcie-artpec6.c b/drivers/pci/controller/dwc/pcie-artpec6.c index 86f4d66d8587..929448e9e0bc 100644 --- a/drivers/pci/controller/dwc/pcie-artpec6.c +++ b/drivers/pci/controller/dwc/pcie-artpec6.c @@ -44,13 +44,6 @@ struct artpec_pcie_of_data { static const struct of_device_id artpec6_pcie_of_match[]; -/* PCIe Port Logic registers (memory-mapped) */ -#define PL_OFFSET 0x700 - -#define ACK_F_ASPM_CTRL_OFF (PL_OFFSET + 0xc) -#define ACK_N_FTS_MASK GENMASK(15, 8) -#define ACK_N_FTS(x) (((x) << 8) & ACK_N_FTS_MASK) - /* ARTPEC-6 specific registers */ #define PCIECFG 0x18 #define PCIECFG_DBG_OEN BIT(24) @@ -289,30 +282,6 @@ static void artpec6_pcie_init_phy(struct artpec6_pcie *artpec6_pcie) } } -static void artpec6_pcie_set_nfts(struct artpec6_pcie *artpec6_pcie) -{ - struct dw_pcie *pci = artpec6_pcie->pci; - u32 val; - - if (artpec6_pcie->variant != ARTPEC7) - return; - - /* - * Increase the N_FTS (Number of Fast Training Sequences) - * to be transmitted when transitioning from L0s to L0. - */ - val = dw_pcie_readl_dbi(pci, ACK_F_ASPM_CTRL_OFF); - val &= ~ACK_N_FTS_MASK; - val |= ACK_N_FTS(180); - dw_pcie_writel_dbi(pci, ACK_F_ASPM_CTRL_OFF, val); - - /* - * Set the Number of Fast Training Sequences that the core - * advertises as its N_FTS during Gen2 or Gen3 link training. - */ - dw_pcie_link_set_n_fts(pci, 180); -} - static void artpec6_pcie_assert_core_reset(struct artpec6_pcie *artpec6_pcie) { u32 val; @@ -351,11 +320,14 @@ static int artpec6_pcie_host_init(struct pcie_port *pp) struct dw_pcie *pci = to_dw_pcie_from_pp(pp); struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci); + if (artpec6_pcie->variant == ARTPEC7) { + pci->n_fts[0] = 180; + pci->n_fts[1] = 180; + } artpec6_pcie_assert_core_reset(artpec6_pcie); artpec6_pcie_init_phy(artpec6_pcie); artpec6_pcie_deassert_core_reset(artpec6_pcie); artpec6_pcie_wait_for_phy(artpec6_pcie); - artpec6_pcie_set_nfts(artpec6_pcie); dw_pcie_setup_rc(pp); artpec6_pcie_establish_link(pci); dw_pcie_wait_for_link(pci); @@ -403,7 +375,6 @@ static void artpec6_pcie_ep_init(struct dw_pcie_ep *ep) artpec6_pcie_init_phy(artpec6_pcie); artpec6_pcie_deassert_core_reset(artpec6_pcie); artpec6_pcie_wait_for_phy(artpec6_pcie); - artpec6_pcie_set_nfts(artpec6_pcie); for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) dw_pcie_ep_reset_bar(pci, bar); diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index 61e1faba15bf..3cb21247619c 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -510,17 +510,6 @@ static void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen) } EXPORT_SYMBOL_GPL(dw_pcie_link_set_max_speed); -void dw_pcie_link_set_n_fts(struct dw_pcie *pci, u32 n_fts) -{ - u32 val; - - val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); - val &= ~PORT_LOGIC_N_FTS_MASK; - val |= n_fts & PORT_LOGIC_N_FTS_MASK; - dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val); -} -EXPORT_SYMBOL_GPL(dw_pcie_link_set_n_fts); - static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) { u32 val; @@ -551,6 +540,23 @@ void dw_pcie_setup(struct dw_pcie *pci) if (pci->link_gen > 0) dw_pcie_link_set_max_speed(pci, pci->link_gen); + /* Configure Gen1 N_FTS */ + if (pci->n_fts[0]) { + val = dw_pcie_readl_dbi(pci, PCIE_PORT_AFR); + val &= ~(PORT_AFR_N_FTS_MASK | PORT_AFR_CC_N_FTS_MASK); + val |= PORT_AFR_N_FTS(pci->n_fts[0]); + val |= PORT_AFR_CC_N_FTS(pci->n_fts[0]); + dw_pcie_writel_dbi(pci, PCIE_PORT_AFR, val); + } + + /* Configure Gen2+ N_FTS */ + if (pci->n_fts[1]) { + val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); + val &= ~PORT_LOGIC_N_FTS_MASK; + val |= pci->n_fts[pci->link_gen - 1]; + dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val); + } + val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL); val &= ~PORT_LINK_FAST_LINK_MODE; val |= PORT_LINK_DLL_LINK_EN; diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index 0b48298362cd..d8771db247f4 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -34,6 +34,7 @@ #define PORT_AFR_N_FTS_MASK GENMASK(15, 8) #define PORT_AFR_N_FTS(n) FIELD_PREP(PORT_AFR_N_FTS_MASK, n) #define PORT_AFR_CC_N_FTS_MASK GENMASK(23, 16) +#define PORT_AFR_CC_N_FTS(n) FIELD_PREP(PORT_AFR_CC_N_FTS_MASK, n) #define PORT_AFR_ENTER_ASPM BIT(30) #define PORT_AFR_L0S_ENTRANCE_LAT_SHIFT 24 #define PORT_AFR_L0S_ENTRANCE_LAT_MASK GENMASK(26, 24) @@ -253,6 +254,7 @@ struct dw_pcie { unsigned int version; int num_lanes; int link_gen; + u8 n_fts[2]; }; #define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp) @@ -271,7 +273,6 @@ void dw_pcie_write_dbi(struct dw_pcie *pci, u32 reg, size_t size, u32 val); void dw_pcie_write_dbi2(struct dw_pcie *pci, u32 reg, size_t size, u32 val); int dw_pcie_link_up(struct dw_pcie *pci); void dw_pcie_upconfig_setup(struct dw_pcie *pci); -void dw_pcie_link_set_n_fts(struct dw_pcie *pci, u32 n_fts); int dw_pcie_wait_for_link(struct dw_pcie *pci); void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type, u64 cpu_addr, u64 pci_addr, diff --git a/drivers/pci/controller/dwc/pcie-intel-gw.c b/drivers/pci/controller/dwc/pcie-intel-gw.c index 333f11561807..5650cb78acba 100644 --- a/drivers/pci/controller/dwc/pcie-intel-gw.c +++ b/drivers/pci/controller/dwc/pcie-intel-gw.c @@ -67,7 +67,6 @@ struct intel_pcie_port { void __iomem *app_base; struct gpio_desc *reset_gpio; u32 rst_intrvl; - u32 n_fts; struct clk *core_clk; struct reset_control *core_rst; struct phy *phy; @@ -138,37 +137,29 @@ static void intel_pcie_link_setup(struct intel_pcie_port *lpp) pcie_rc_cfg_wr(lpp, offset + PCI_EXP_LNKCTL, val); } -static void intel_pcie_port_logic_setup(struct intel_pcie_port *lpp) +static void intel_pcie_init_n_fts(struct dw_pcie *pci) { - u32 val, mask; - struct dw_pcie *pci = &lpp->pci; - - switch (pcie_link_speed[pci->link_gen]) { - case PCIE_SPEED_8_0GT: - lpp->n_fts = PORT_AFR_N_FTS_GEN3; + switch (pci->link_gen) { + case 3: + pci->n_fts[1] = PORT_AFR_N_FTS_GEN3; break; - case PCIE_SPEED_16_0GT: - lpp->n_fts = PORT_AFR_N_FTS_GEN4; + case 4: + pci->n_fts[1] = PORT_AFR_N_FTS_GEN4; break; default: - lpp->n_fts = PORT_AFR_N_FTS_GEN12_DFT; + pci->n_fts[1] = PORT_AFR_N_FTS_GEN12_DFT; break; } - - mask = PORT_AFR_N_FTS_MASK | PORT_AFR_CC_N_FTS_MASK; - val = FIELD_PREP(PORT_AFR_N_FTS_MASK, lpp->n_fts) | - FIELD_PREP(PORT_AFR_CC_N_FTS_MASK, lpp->n_fts); - pcie_rc_cfg_wr_mask(lpp, PCIE_PORT_AFR, mask, val); + pci->n_fts[0] = PORT_AFR_N_FTS_GEN12_DFT; } static void intel_pcie_rc_setup(struct intel_pcie_port *lpp) { intel_pcie_ltssm_disable(lpp); intel_pcie_link_setup(lpp); + intel_pcie_init_n_fts(&lpp->pci); dw_pcie_setup_rc(&lpp->pci.pp); dw_pcie_upconfig_setup(&lpp->pci); - intel_pcie_port_logic_setup(lpp); - dw_pcie_link_set_n_fts(&lpp->pci, lpp->n_fts); } static int intel_pcie_ep_rst_init(struct intel_pcie_port *lpp) diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c index 91ef4b3e860d..1560c449757d 100644 --- a/drivers/pci/controller/dwc/pcie-tegra194.c +++ b/drivers/pci/controller/dwc/pcie-tegra194.c @@ -881,17 +881,6 @@ static void tegra_pcie_prepare_host(struct pcie_port *pp) dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0); - /* Configure FTS */ - val = dw_pcie_readl_dbi(pci, PCIE_PORT_AFR); - val &= ~PORT_AFR_N_FTS_MASK; - val |= PORT_AFR_N_FTS(N_FTS_VAL); - dw_pcie_writel_dbi(pci, PCIE_PORT_AFR, val); - - val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); - val &= ~PORT_LOGIC_N_FTS_MASK; - val |= FTS_VAL; - dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val); - /* Enable as 0xFFFF0001 response for CRS */ val = dw_pcie_readl_dbi(pci, PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT); val &= ~(AMBA_ERROR_RESPONSE_CRS_MASK << AMBA_ERROR_RESPONSE_CRS_SHIFT); @@ -1794,17 +1783,6 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie) val &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL; dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, val); - /* Configure N_FTS & FTS */ - val = dw_pcie_readl_dbi(pci, PCIE_PORT_AFR); - val &= ~PORT_AFR_N_FTS_MASK; - val |= PORT_AFR_N_FTS(FTS_VAL); - dw_pcie_writel_dbi(pci, PCIE_PORT_AFR, val); - - val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); - val &= ~PORT_LOGIC_N_FTS_MASK; - val |= FTS_VAL; - dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val); - pcie->pcie_cap_base = dw_pcie_find_capability(&pcie->pci, PCI_CAP_ID_EXP); clk_set_rate(pcie->core_clk, GEN4_CORE_CLK_FREQ); @@ -2033,6 +2011,9 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev) pci = &pcie->pci; pci->dev = &pdev->dev; pci->ops = &tegra_dw_pcie_ops; + pci->n_fts[0] = N_FTS_VAL; + pci->n_fts[1] = FTS_VAL; + pp = &pci->pp; pcie->dev = &pdev->dev; pcie->mode = (enum dw_pcie_device_mode)data->mode;
The Designware controller has common registers to set number of fast training sequence ordered sets. The Artpec6, Intel, and Tegra driver initialize these register fields. Let's move the initialization to the common setup code and drivers just have to provide the value. There's a slight change in that the common clock mode N_FTS field is now initialized. Previously only the Intel driver set this. It's not clear from the code if common clock mode is used in the Artpec6 or Tegra driver. It depends on the DWC configuration. Given the field is not initialized while the others are, it seems unlikely common clock mode is used. Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> --- drivers/pci/controller/dwc/pcie-artpec6.c | 37 +++----------------- drivers/pci/controller/dwc/pcie-designware.c | 28 +++++++++------ drivers/pci/controller/dwc/pcie-designware.h | 3 +- drivers/pci/controller/dwc/pcie-intel-gw.c | 27 +++++--------- drivers/pci/controller/dwc/pcie-tegra194.c | 25 ++----------- 5 files changed, 35 insertions(+), 85 deletions(-)