diff mbox series

[v3,1/2] Bluetooth: Fix handling of LE Enhanced Connection Complete

Message ID 20210811192800.710330-1-luiz.dentz@gmail.com (mailing list archive)
State Superseded
Headers show
Series [v3,1/2] Bluetooth: Fix handling of LE Enhanced Connection Complete | expand

Commit Message

Luiz Augusto von Dentz Aug. 11, 2021, 7:27 p.m. UTC
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

LE Enhanced Connection Complete contains the Local RPA used in the
connection which must be used when set otherwise there could problems
when pairing since the address used by the remote stack could be the
Local RPA:

BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 4, Part E
page 2396

  'Resolvable Private Address being used by the local device for this
  connection. This is only valid when the Own_Address_Type (from the
  HCI_LE_Create_Connection, HCI_LE_Set_Advertising_Parameters,
  HCI_LE_Set_Extended_Advertising_Parameters, or
  HCI_LE_Extended_Create_Connection commands) is set to 0x02 or
  0x03, and the Controller generated a resolvable private address for the
  local device using a non-zero local IRK. For other Own_Address_Type
  values, the Controller shall return all zeros.'

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 net/bluetooth/hci_event.c | 93 ++++++++++++++++++++++++++-------------
 1 file changed, 62 insertions(+), 31 deletions(-)

Comments

bluez.test.bot@gmail.com Aug. 11, 2021, 8 p.m. UTC | #1
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=530121

---Test result---

Test Summary:
CheckPatch                    FAIL      0.61 seconds
GitLint                       PASS      0.23 seconds
BuildKernel                   PASS      611.56 seconds
TestRunner: Setup             PASS      394.99 seconds
TestRunner: l2cap-tester      PASS      2.95 seconds
TestRunner: bnep-tester       PASS      2.07 seconds
TestRunner: mgmt-tester       PASS      30.83 seconds
TestRunner: rfcomm-tester     PASS      2.32 seconds
TestRunner: sco-tester        PASS      2.25 seconds
TestRunner: smp-tester        FAIL      2.27 seconds
TestRunner: userchan-tester   PASS      2.09 seconds

Details
##############################
Test: CheckPatch - FAIL - 0.61 seconds
Run checkpatch.pl script with rule in .checkpatch.conf
Bluetooth: Fix handling of LE Enhanced Connection Complete
ERROR: trailing statements should be on next line (or did you mean 'else if'?)
#47: FILE: net/bluetooth/hci_event.c:5178:
+		} if (hci_dev_test_flag(conn->hdev, HCI_PRIVACY)) {

total: 1 errors, 0 warnings, 0 checks, 124 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
      mechanically convert to the typical style using --fix or --fix-inplace.

"[PATCH] Bluetooth: Fix handling of LE Enhanced Connection Complete" has style problems, please review.

NOTE: If any of the errors are false positives, please report
      them to the maintainer, see CHECKPATCH in MAINTAINERS.


##############################
Test: GitLint - PASS - 0.23 seconds
Run gitlint with rule in .gitlint


##############################
Test: BuildKernel - PASS - 611.56 seconds
Build Kernel with minimal configuration supports Bluetooth


##############################
Test: TestRunner: Setup - PASS - 394.99 seconds
Setup environment for running Test Runner


##############################
Test: TestRunner: l2cap-tester - PASS - 2.95 seconds
Run test-runner with l2cap-tester
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: bnep-tester - PASS - 2.07 seconds
Run test-runner with bnep-tester
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: mgmt-tester - PASS - 30.83 seconds
Run test-runner with mgmt-tester
Total: 448, Passed: 445 (99.3%), Failed: 0, Not Run: 3

##############################
Test: TestRunner: rfcomm-tester - PASS - 2.32 seconds
Run test-runner with rfcomm-tester
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: sco-tester - PASS - 2.25 seconds
Run test-runner with sco-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0

##############################
Test: TestRunner: smp-tester - FAIL - 2.27 seconds
Run test-runner with smp-tester
Total: 8, Passed: 7 (87.5%), Failed: 1, Not Run: 0

Failed Test Cases
SMP Client - SC Request 2                            Failed       0.024 seconds

##############################
Test: TestRunner: userchan-tester - PASS - 2.09 seconds
Run test-runner with userchan-tester
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0



---
Regards,
Linux Bluetooth
diff mbox series

Patch

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 38decf474f31..80df514691a0 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5161,9 +5161,64 @@  static void hci_disconn_phylink_complete_evt(struct hci_dev *hdev,
 }
 #endif
 
+static void le_conn_update_addr(struct hci_conn *conn, bdaddr_t *bdaddr,
+				u8 bdaddr_type, bdaddr_t *local_rpa)
+{
+	if (conn->out) {
+		conn->dst_type = bdaddr_type;
+		conn->resp_addr_type = bdaddr_type;
+		bacpy(&conn->resp_addr, bdaddr);
+
+		/* Check if the controller has set a Local RPA then it must be
+		 * used instead or hdev->rpa.
+		 */
+		if (local_rpa && bacmp(local_rpa, BDADDR_ANY)) {
+			conn->init_addr_type = ADDR_LE_DEV_RANDOM;
+			bacpy(&conn->init_addr, local_rpa);
+		} if (hci_dev_test_flag(conn->hdev, HCI_PRIVACY)) {
+			conn->init_addr_type = ADDR_LE_DEV_RANDOM;
+			bacpy(&conn->init_addr, &conn->hdev->rpa);
+		} else {
+			hci_copy_identity_address(conn->hdev, &conn->init_addr,
+						  &conn->init_addr_type);
+		}
+	} else {
+		conn->resp_addr_type = conn->hdev->adv_addr_type;
+		/* Check if the controller has set a Local RPA then it must be
+		 * used instead or hdev->rpa.
+		 */
+		if (local_rpa && bacmp(local_rpa, BDADDR_ANY)) {
+			conn->resp_addr_type = ADDR_LE_DEV_RANDOM;
+			bacpy(&conn->resp_addr, local_rpa);
+		} else if (conn->hdev->adv_addr_type == ADDR_LE_DEV_RANDOM) {
+			/* In case of ext adv, resp_addr will be updated in
+			 * Adv Terminated event.
+			 */
+			if (!ext_adv_capable(conn->hdev))
+				bacpy(&conn->resp_addr,
+				      &conn->hdev->random_addr);
+		} else {
+			bacpy(&conn->resp_addr, &conn->hdev->bdaddr);
+		}
+
+		conn->init_addr_type = bdaddr_type;
+		bacpy(&conn->init_addr, bdaddr);
+
+		/* For incoming connections, set the default minimum
+		 * and maximum connection interval. They will be used
+		 * to check if the parameters are in range and if not
+		 * trigger the connection update procedure.
+		 */
+		conn->le_conn_min_interval = conn->hdev->le_conn_min_interval;
+		conn->le_conn_max_interval = conn->hdev->le_conn_max_interval;
+	}
+}
+
 static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
-			bdaddr_t *bdaddr, u8 bdaddr_type, u8 role, u16 handle,
-			u16 interval, u16 latency, u16 supervision_timeout)
+				 bdaddr_t *bdaddr, u8 bdaddr_type,
+				 bdaddr_t *local_rpa, u8 role, u16 handle,
+				 u16 interval, u16 latency,
+				 u16 supervision_timeout)
 {
 	struct hci_conn_params *params;
 	struct hci_conn *conn;
@@ -5211,32 +5266,7 @@  static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
 		cancel_delayed_work(&conn->le_conn_timeout);
 	}
 
-	if (!conn->out) {
-		/* Set the responder (our side) address type based on
-		 * the advertising address type.
-		 */
-		conn->resp_addr_type = hdev->adv_addr_type;
-		if (hdev->adv_addr_type == ADDR_LE_DEV_RANDOM) {
-			/* In case of ext adv, resp_addr will be updated in
-			 * Adv Terminated event.
-			 */
-			if (!ext_adv_capable(hdev))
-				bacpy(&conn->resp_addr, &hdev->random_addr);
-		} else {
-			bacpy(&conn->resp_addr, &hdev->bdaddr);
-		}
-
-		conn->init_addr_type = bdaddr_type;
-		bacpy(&conn->init_addr, bdaddr);
-
-		/* For incoming connections, set the default minimum
-		 * and maximum connection interval. They will be used
-		 * to check if the parameters are in range and if not
-		 * trigger the connection update procedure.
-		 */
-		conn->le_conn_min_interval = hdev->le_conn_min_interval;
-		conn->le_conn_max_interval = hdev->le_conn_max_interval;
-	}
+	le_conn_update_addr(conn, bdaddr, bdaddr_type, local_rpa);
 
 	/* Lookup the identity address from the stored connection
 	 * address and address type.
@@ -5347,7 +5377,7 @@  static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
 	BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
 
 	le_conn_complete_evt(hdev, ev->status, &ev->bdaddr, ev->bdaddr_type,
-			     ev->role, le16_to_cpu(ev->handle),
+			     NULL, ev->role, le16_to_cpu(ev->handle),
 			     le16_to_cpu(ev->interval),
 			     le16_to_cpu(ev->latency),
 			     le16_to_cpu(ev->supervision_timeout));
@@ -5361,7 +5391,7 @@  static void hci_le_enh_conn_complete_evt(struct hci_dev *hdev,
 	BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
 
 	le_conn_complete_evt(hdev, ev->status, &ev->bdaddr, ev->bdaddr_type,
-			     ev->role, le16_to_cpu(ev->handle),
+			     &ev->local_rpa, ev->role, le16_to_cpu(ev->handle),
 			     le16_to_cpu(ev->interval),
 			     le16_to_cpu(ev->latency),
 			     le16_to_cpu(ev->supervision_timeout));
@@ -5397,7 +5427,8 @@  static void hci_le_ext_adv_term_evt(struct hci_dev *hdev, struct sk_buff *skb)
 	if (conn) {
 		struct adv_info *adv_instance;
 
-		if (hdev->adv_addr_type != ADDR_LE_DEV_RANDOM)
+		if (hdev->adv_addr_type != ADDR_LE_DEV_RANDOM ||
+		    bacmp(&conn->resp_addr, BDADDR_ANY))
 			return;
 
 		if (!ev->handle) {