[v3,0/7] Add minimal support for Exynos850 SoC

Message

Sam Protsenko Aug. 11, 2021, 11:48 a.m. UTC

This patch series adds initial platform support for Samsung Exynos850
SoC [1]. With this patchset it's possible to run the kernel with BusyBox
rootfs as a RAM disk. More advanced platform support (like MMC driver
additions) will be added later. The idea is to keep the first submission
minimal to ease the review, and then build up on top of that.

[1] https://www.samsung.com/semiconductor/minisite/exynos/products/mobileprocessor/exynos-850/

Changes in v3:
 * Removed the stub clock driver; uart clock is modeled as generic fixed
   clock in dts for now
 * See also changes in each particular patch

Changes in v2:
 * Rebased on top of current linux-mainline
 * Removed patch ("pinctrl: samsung: Fix pinctrl bank pin count"); it
   was sent separately, as it's an independent fix
 * Made the patch ("dt-bindings: pinctrl: samsung: Add Exynos850 doc")
   to be the first in series
 * Removed patch ("MAINTAINERS: Changes in v2"); will add that later,
   when proper clock driver is implemented
 * Removed patch ("dt-bindings: clock: Add bindings for Exynos850 clock
   controller"); will add clock bindings later, when proper clock driver
   is implemented
 * Removed patch ("dt-bindings: interrupt-controller: Add IRQ constants
   for Exynos850"), and used hard-coded IRQ numbers in dts instead
 * See also changes in each particular patch

Sam Protsenko (7):
  dt-bindings: pinctrl: samsung: Add Exynos850 doc
  pinctrl: samsung: Add Exynos850 SoC specific data
  dt-bindings: serial: samsung: Add Exynos850 doc
  tty: serial: samsung: Init USI to keep clocks running
  tty: serial: samsung: Fix driver data macros style
  tty: serial: samsung: Add Exynos850 SoC data
  arm64: dts: exynos: Add Exynos850 SoC support

 .../bindings/pinctrl/samsung-pinctrl.txt      |   1 +
 .../bindings/serial/samsung_uart.yaml         |   1 +
 .../boot/dts/exynos/exynos850-pinctrl.dtsi    | 748 ++++++++++++++++++
 arch/arm64/boot/dts/exynos/exynos850.dtsi     | 261 ++++++
 .../pinctrl/samsung/pinctrl-exynos-arm64.c    | 116 +++
 drivers/pinctrl/samsung/pinctrl-exynos.h      |  29 +
 drivers/pinctrl/samsung/pinctrl-samsung.c     |   2 +
 drivers/pinctrl/samsung/pinctrl-samsung.h     |   1 +
 drivers/tty/serial/samsung_tty.c              |  49 +-
 include/linux/serial_s3c.h                    |   9 +
 10 files changed, 1214 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos850.dtsi

Comments

Krzysztof Kozlowski Aug. 13, 2021, 7:41 a.m. UTC | #1

On Wed, 11 Aug 2021 14:48:20 +0300, Sam Protsenko wrote:
> This patch series adds initial platform support for Samsung Exynos850
> SoC [1]. With this patchset it's possible to run the kernel with BusyBox
> rootfs as a RAM disk. More advanced platform support (like MMC driver
> additions) will be added later. The idea is to keep the first submission
> minimal to ease the review, and then build up on top of that.
> 
> [1] https://www.samsung.com/semiconductor/minisite/exynos/products/mobileprocessor/exynos-850/
> 
> [...]

Applied, thanks!

[1/7] dt-bindings: pinctrl: samsung: Add Exynos850 doc
      commit: 71b833b329d65236285cc73f4528f08c7d3c274c
[2/7] pinctrl: samsung: Add Exynos850 SoC specific data
      commit: cdd3d945dcec0d0dab845175dc9400ab54512aa6

Best regards,