| Message ID | 20210805065429.27485-3-clin@suse.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: initial NXP S32G2 support | expand |
On 05.08.21 08:54, Chester Lin wrote: > Convert the FSL LINFlexD UART binding to json-schema. > > Signed-off-by: Chester Lin <clin@suse.com> > --- > .../bindings/serial/fsl,s32-linflexuart.txt | 22 --------- > .../bindings/serial/fsl,s32-linflexuart.yaml | 48 +++++++++++++++++++ > 2 files changed, 48 insertions(+), 22 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt > create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml Thanks for your effort, Chester. > diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt > deleted file mode 100644 > index f1bbe0826be5..000000000000 > --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt > +++ /dev/null > @@ -1,22 +0,0 @@ > -* Freescale LINFlexD UART > - > -The LINFlexD controller implements several LIN protocol versions, as well as > -support for full-duplex UART communication through 8-bit and 9-bit frames. > - > -See chapter 47 ("LINFlexD") in the reference manual[1]. > - > -Required properties: > -- compatible : > - - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which > - is compatible with the one integrated on S32V234 SoC > -- reg : Address and length of the register set for the device > -- interrupts : Should contain uart interrupt > - > -Example: > -uart0: serial@40053000 { > - compatible = "fsl,s32v234-linflexuart"; > - reg = <0x0 0x40053000 0x0 0x1000>; > - interrupts = <0 59 4>; > -}; > - > -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM > diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml > new file mode 100644 > index 000000000000..acfe34706ccb > --- /dev/null > +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml > @@ -0,0 +1,48 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) Since this is dual-licensed and BSD-2-Clause would seem compatible with GPLv3, this could probably be s/GPL-2.0-only/GPL-2.0-or-later/ ? Not a blocker. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale LINFlexD UART > + > +description: | > + The LINFlexD controller implements several LIN protocol versions, as well > + as support for full-duplex UART communication through 8-bit and 9-bit > + frames. See chapter 47 ("LINFlexD") in the reference manual > + https://www.nxp.com/webapp/Download?colCode=S32V234RM. > + > +maintainers: > + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> > + - Rob Herring <robh@kernel.org> @Shawn: I assume we need both of them to ack this (or an S32V maintainer to volunteer), since they were not named in the .txt file before? > + > +allOf: > + - $ref: "serial.yaml" > + > +properties: > + compatible: > + description: The LINFlexD controller on S32V234 SoC, which can be > + configured in UART mode. > + items: > + - const: fsl,s32v234-linflexuart > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - interrupts > + > +unevaluatedProperties: false > + > +examples: > + - | > + serial@40053000 { > + compatible = "fsl,s32v234-linflexuart"; > + reg = <0x40053000 0x1000>; > + interrupts = <0 59 4>; > + }; Otherwise looking sane, Reviewed-by: Andreas Färber <afaerber@suse.de> Thanks, Andreas
Hi Andreas, On Thu, Aug 12, 2021 at 06:04:44PM +0200, Andreas Färber wrote: > On 05.08.21 08:54, Chester Lin wrote: > > Convert the FSL LINFlexD UART binding to json-schema. > > > > Signed-off-by: Chester Lin <clin@suse.com> > > --- > > .../bindings/serial/fsl,s32-linflexuart.txt | 22 --------- > > .../bindings/serial/fsl,s32-linflexuart.yaml | 48 +++++++++++++++++++ > > 2 files changed, 48 insertions(+), 22 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt > > create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml > > Thanks for your effort, Chester. > > > diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt > > deleted file mode 100644 > > index f1bbe0826be5..000000000000 > > --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt > > +++ /dev/null > > @@ -1,22 +0,0 @@ > > -* Freescale LINFlexD UART > > - > > -The LINFlexD controller implements several LIN protocol versions, as well as > > -support for full-duplex UART communication through 8-bit and 9-bit frames. > > - > > -See chapter 47 ("LINFlexD") in the reference manual[1]. > > - > > -Required properties: > > -- compatible : > > - - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which > > - is compatible with the one integrated on S32V234 SoC > > -- reg : Address and length of the register set for the device > > -- interrupts : Should contain uart interrupt > > - > > -Example: > > -uart0: serial@40053000 { > > - compatible = "fsl,s32v234-linflexuart"; > > - reg = <0x0 0x40053000 0x0 0x1000>; > > - interrupts = <0 59 4>; > > -}; > > - > > -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM > > diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml > > new file mode 100644 > > index 000000000000..acfe34706ccb > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml > > @@ -0,0 +1,48 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > Since this is dual-licensed and BSD-2-Clause would seem compatible with > GPLv3, this could probably be s/GPL-2.0-only/GPL-2.0-or-later/ ? Not a > blocker. There's no license identifier in the original file so it's not a problem to choose "GPL-2.0-or-later". > > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Freescale LINFlexD UART > > + > > +description: | > > + The LINFlexD controller implements several LIN protocol versions, as well > > + as support for full-duplex UART communication through 8-bit and 9-bit > > + frames. See chapter 47 ("LINFlexD") in the reference manual > > + https://www.nxp.com/webapp/Download?colCode=S32V234RM. > > + > > +maintainers: > > + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> > > + - Rob Herring <robh@kernel.org> > > @Shawn: I assume we need both of them to ack this (or an S32V maintainer > to volunteer), since they were not named in the .txt file before? > > > + > > +allOf: > > + - $ref: "serial.yaml" > > + > > +properties: > > + compatible: > > + description: The LINFlexD controller on S32V234 SoC, which can be > > + configured in UART mode. > > + items: > > + - const: fsl,s32v234-linflexuart > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + > > +unevaluatedProperties: false > > + > > +examples: > > + - | > > + serial@40053000 { > > + compatible = "fsl,s32v234-linflexuart"; > > + reg = <0x40053000 0x1000>; > > + interrupts = <0 59 4>; > > + }; > > Otherwise looking sane, > > Reviewed-by: Andreas Färber <afaerber@suse.de> > > Thanks, > Andreas > > -- > SUSE Software Solutions Germany GmbH > Maxfeldstr. 5, 90409 Nürnberg, Germany > GF: Felix Imendörffer > HRB 36809 (AG Nürnberg) >
On 13/08/2021 13:11, Chester Lin wrote: > Hi Andreas, > > On Thu, Aug 12, 2021 at 06:04:44PM +0200, Andreas Färber wrote: >> On 05.08.21 08:54, Chester Lin wrote: >>> Convert the FSL LINFlexD UART binding to json-schema. >>> >>> Signed-off-by: Chester Lin <clin@suse.com> >>> --- >>> .../bindings/serial/fsl,s32-linflexuart.txt | 22 --------- >>> .../bindings/serial/fsl,s32-linflexuart.yaml | 48 +++++++++++++++++++ >>> 2 files changed, 48 insertions(+), 22 deletions(-) >>> delete mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt >>> create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml >> >> Thanks for your effort, Chester. >> >>> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt >>> deleted file mode 100644 >>> index f1bbe0826be5..000000000000 >>> --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt >>> +++ /dev/null >>> @@ -1,22 +0,0 @@ >>> -* Freescale LINFlexD UART >>> - >>> -The LINFlexD controller implements several LIN protocol versions, as well as >>> -support for full-duplex UART communication through 8-bit and 9-bit frames. >>> - >>> -See chapter 47 ("LINFlexD") in the reference manual[1]. >>> - >>> -Required properties: >>> -- compatible : >>> - - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which >>> - is compatible with the one integrated on S32V234 SoC >>> -- reg : Address and length of the register set for the device >>> -- interrupts : Should contain uart interrupt >>> - >>> -Example: >>> -uart0: serial@40053000 { >>> - compatible = "fsl,s32v234-linflexuart"; >>> - reg = <0x0 0x40053000 0x0 0x1000>; >>> - interrupts = <0 59 4>; >>> -}; >>> - >>> -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM >>> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml >>> new file mode 100644 >>> index 000000000000..acfe34706ccb >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml >>> @@ -0,0 +1,48 @@ >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> >> Since this is dual-licensed and BSD-2-Clause would seem compatible with >> GPLv3, this could probably be s/GPL-2.0-only/GPL-2.0-or-later/ ? Not a >> blocker. > > There's no license identifier in the original file so it's not a problem to > choose "GPL-2.0-or-later". That is not entirely correct. If there is no explicit license in the file, it's kernel's default so GPL-2.0-only. You cannot relicense derivative work without getting permission from authors and copyright holders. However if you did not copy the text/description from original bindings, your work won't be derivative so you can relicense it. Best regards, Krzysztof
On Fri, Aug 13, 2021 at 01:28:40PM +0200, Krzysztof Kozlowski wrote: > On 13/08/2021 13:11, Chester Lin wrote: > > Hi Andreas, > > > > On Thu, Aug 12, 2021 at 06:04:44PM +0200, Andreas Färber wrote: > >> On 05.08.21 08:54, Chester Lin wrote: > >>> Convert the FSL LINFlexD UART binding to json-schema. > >>> > >>> Signed-off-by: Chester Lin <clin@suse.com> > >>> --- > >>> .../bindings/serial/fsl,s32-linflexuart.txt | 22 --------- > >>> .../bindings/serial/fsl,s32-linflexuart.yaml | 48 +++++++++++++++++++ > >>> 2 files changed, 48 insertions(+), 22 deletions(-) > >>> delete mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt > >>> create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml > >> > >> Thanks for your effort, Chester. > >> > >>> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt > >>> deleted file mode 100644 > >>> index f1bbe0826be5..000000000000 > >>> --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt > >>> +++ /dev/null > >>> @@ -1,22 +0,0 @@ > >>> -* Freescale LINFlexD UART > >>> - > >>> -The LINFlexD controller implements several LIN protocol versions, as well as > >>> -support for full-duplex UART communication through 8-bit and 9-bit frames. > >>> - > >>> -See chapter 47 ("LINFlexD") in the reference manual[1]. > >>> - > >>> -Required properties: > >>> -- compatible : > >>> - - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which > >>> - is compatible with the one integrated on S32V234 SoC > >>> -- reg : Address and length of the register set for the device > >>> -- interrupts : Should contain uart interrupt > >>> - > >>> -Example: > >>> -uart0: serial@40053000 { > >>> - compatible = "fsl,s32v234-linflexuart"; > >>> - reg = <0x0 0x40053000 0x0 0x1000>; > >>> - interrupts = <0 59 4>; > >>> -}; > >>> - > >>> -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM > >>> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml > >>> new file mode 100644 > >>> index 000000000000..acfe34706ccb > >>> --- /dev/null > >>> +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml > >>> @@ -0,0 +1,48 @@ > >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > >> > >> Since this is dual-licensed and BSD-2-Clause would seem compatible with > >> GPLv3, this could probably be s/GPL-2.0-only/GPL-2.0-or-later/ ? Not a > >> blocker. > > > > There's no license identifier in the original file so it's not a problem to > > choose "GPL-2.0-or-later". > > That is not entirely correct. If there is no explicit license in the > file, it's kernel's default so GPL-2.0-only. You cannot relicense > derivative work without getting permission from authors and copyright > holders. > > However if you did not copy the text/description from original bindings, > your work won't be derivative so you can relicense it. > Sorry for my misunderstanding and thanks for the reminder. Regards, Chester
On Fri, Aug 13, 2021 at 07:43:17PM +0800, Chester Lin wrote: > On Fri, Aug 13, 2021 at 01:28:40PM +0200, Krzysztof Kozlowski wrote: > > On 13/08/2021 13:11, Chester Lin wrote: > > > Hi Andreas, > > > > > > On Thu, Aug 12, 2021 at 06:04:44PM +0200, Andreas Färber wrote: > > >> On 05.08.21 08:54, Chester Lin wrote: > > >>> Convert the FSL LINFlexD UART binding to json-schema. > > >>> > > >>> Signed-off-by: Chester Lin <clin@suse.com> > > >>> --- > > >>> .../bindings/serial/fsl,s32-linflexuart.txt | 22 --------- > > >>> .../bindings/serial/fsl,s32-linflexuart.yaml | 48 +++++++++++++++++++ > > >>> 2 files changed, 48 insertions(+), 22 deletions(-) > > >>> delete mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt > > >>> create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml > > >> > > >> Thanks for your effort, Chester. > > >> > > >>> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt > > >>> deleted file mode 100644 > > >>> index f1bbe0826be5..000000000000 > > >>> --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt > > >>> +++ /dev/null > > >>> @@ -1,22 +0,0 @@ > > >>> -* Freescale LINFlexD UART > > >>> - > > >>> -The LINFlexD controller implements several LIN protocol versions, as well as > > >>> -support for full-duplex UART communication through 8-bit and 9-bit frames. > > >>> - > > >>> -See chapter 47 ("LINFlexD") in the reference manual[1]. > > >>> - > > >>> -Required properties: > > >>> -- compatible : > > >>> - - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which > > >>> - is compatible with the one integrated on S32V234 SoC > > >>> -- reg : Address and length of the register set for the device > > >>> -- interrupts : Should contain uart interrupt > > >>> - > > >>> -Example: > > >>> -uart0: serial@40053000 { > > >>> - compatible = "fsl,s32v234-linflexuart"; > > >>> - reg = <0x0 0x40053000 0x0 0x1000>; > > >>> - interrupts = <0 59 4>; > > >>> -}; > > >>> - > > >>> -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM > > >>> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml > > >>> new file mode 100644 > > >>> index 000000000000..acfe34706ccb > > >>> --- /dev/null > > >>> +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml > > >>> @@ -0,0 +1,48 @@ > > >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > >> > > >> Since this is dual-licensed and BSD-2-Clause would seem compatible with > > >> GPLv3, this could probably be s/GPL-2.0-only/GPL-2.0-or-later/ ? Not a > > >> blocker. > > > > > > There's no license identifier in the original file so it's not a problem to > > > choose "GPL-2.0-or-later". > > > > That is not entirely correct. If there is no explicit license in the > > file, it's kernel's default so GPL-2.0-only. You cannot relicense > > derivative work without getting permission from authors and copyright > > holders. > > > > However if you did not copy the text/description from original bindings, > > your work won't be derivative so you can relicense it. > > > > Sorry for my misunderstanding and thanks for the reminder. TBC, please try and get permission to relicense. The single author was from NXP so changing the license here just needs the okay from any NXP employee. But use 'GPL-2.0-only' not 'GPL-2.0-or-later' please. As gregkh says, are you okay with GPLv4, v5, etc.? Rob
On Thu, Aug 05, 2021 at 02:54:23PM +0800, Chester Lin wrote: > Convert the FSL LINFlexD UART binding to json-schema. > > Signed-off-by: Chester Lin <clin@suse.com> > --- > .../bindings/serial/fsl,s32-linflexuart.txt | 22 --------- > .../bindings/serial/fsl,s32-linflexuart.yaml | 48 +++++++++++++++++++ > 2 files changed, 48 insertions(+), 22 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt > create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml > > diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt > deleted file mode 100644 > index f1bbe0826be5..000000000000 > --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt > +++ /dev/null > @@ -1,22 +0,0 @@ > -* Freescale LINFlexD UART > - > -The LINFlexD controller implements several LIN protocol versions, as well as > -support for full-duplex UART communication through 8-bit and 9-bit frames. > - > -See chapter 47 ("LINFlexD") in the reference manual[1]. > - > -Required properties: > -- compatible : > - - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which > - is compatible with the one integrated on S32V234 SoC > -- reg : Address and length of the register set for the device > -- interrupts : Should contain uart interrupt > - > -Example: > -uart0: serial@40053000 { > - compatible = "fsl,s32v234-linflexuart"; > - reg = <0x0 0x40053000 0x0 0x1000>; > - interrupts = <0 59 4>; > -}; > - > -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM > diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml > new file mode 100644 > index 000000000000..acfe34706ccb > --- /dev/null > +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml > @@ -0,0 +1,48 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale LINFlexD UART > + > +description: | > + The LINFlexD controller implements several LIN protocol versions, as well > + as support for full-duplex UART communication through 8-bit and 9-bit > + frames. See chapter 47 ("LINFlexD") in the reference manual > + https://www.nxp.com/webapp/Download?colCode=S32V234RM. > + > +maintainers: > + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> > + - Rob Herring <robh@kernel.org> Someone that cares about this h/w, not who applies patches. > + > +allOf: > + - $ref: "serial.yaml" > + > +properties: > + compatible: > + description: The LINFlexD controller on S32V234 SoC, which can be > + configured in UART mode. Drop 'on S32V234 SoC' so we're not editting for every new SoC. > + items: > + - const: fsl,s32v234-linflexuart > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - interrupts > + > +unevaluatedProperties: false > + > +examples: > + - | > + serial@40053000 { > + compatible = "fsl,s32v234-linflexuart"; > + reg = <0x40053000 0x1000>; > + interrupts = <0 59 4>; > + }; > -- > 2.30.0 > >
diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt deleted file mode 100644 index f1bbe0826be5..000000000000 --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Freescale LINFlexD UART - -The LINFlexD controller implements several LIN protocol versions, as well as -support for full-duplex UART communication through 8-bit and 9-bit frames. - -See chapter 47 ("LINFlexD") in the reference manual[1]. - -Required properties: -- compatible : - - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which - is compatible with the one integrated on S32V234 SoC -- reg : Address and length of the register set for the device -- interrupts : Should contain uart interrupt - -Example: -uart0: serial@40053000 { - compatible = "fsl,s32v234-linflexuart"; - reg = <0x0 0x40053000 0x0 0x1000>; - interrupts = <0 59 4>; -}; - -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml new file mode 100644 index 000000000000..acfe34706ccb --- /dev/null +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale LINFlexD UART + +description: | + The LINFlexD controller implements several LIN protocol versions, as well + as support for full-duplex UART communication through 8-bit and 9-bit + frames. See chapter 47 ("LINFlexD") in the reference manual + https://www.nxp.com/webapp/Download?colCode=S32V234RM. + +maintainers: + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + - Rob Herring <robh@kernel.org> + +allOf: + - $ref: "serial.yaml" + +properties: + compatible: + description: The LINFlexD controller on S32V234 SoC, which can be + configured in UART mode. + items: + - const: fsl,s32v234-linflexuart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + serial@40053000 { + compatible = "fsl,s32v234-linflexuart"; + reg = <0x40053000 0x1000>; + interrupts = <0 59 4>; + };
Convert the FSL LINFlexD UART binding to json-schema. Signed-off-by: Chester Lin <clin@suse.com> --- .../bindings/serial/fsl,s32-linflexuart.txt | 22 --------- .../bindings/serial/fsl,s32-linflexuart.yaml | 48 +++++++++++++++++++ 2 files changed, 48 insertions(+), 22 deletions(-) delete mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml