| Message ID | 20210811073027.124619-2-puranjay12@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | iio: accel: add support for ADXL355 | expand |
+cc Rob Herring <robh+dt@kernel.org> On Wed, Aug 11, 2021 at 1:00 PM Puranjay Mohan <puranjay12@gmail.com> wrote: > > Add devicetree binding document for ADXL355, a 3-Axis MEMS Accelerometer. > > Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> > --- > .../bindings/iio/accel/adi,adxl355.yaml | 88 +++++++++++++++++++ > 1 file changed, 88 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml > > diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml > new file mode 100644 > index 000000000..ba54d6998 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml > @@ -0,0 +1,88 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer > + > +maintainers: > + - Puranjay Mohan <puranjay12@gmail.com> > + > +description: | > + Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports > + both I2C & SPI interfaces > + https://www.analog.com/en/products/adxl355.html > + > +properties: > + compatible: > + enum: > + - adi,adxl355 > + > + reg: > + maxItems: 1 > + > + interrupts: > + minItems: 1 > + maxItems: 3 > + description: | > + Type for DRDY should be IRQ_TYPE_EDGE_RISING. > + Three configurable interrupt lines exist. > + > + interrupt-names: > + description: Specify which interrupt line is in use. > + items: > + enum: > + - INT1 > + - INT2 > + - DRDY > + minItems: 1 > + maxItems: 3 > + > + vdd-supply: > + description: Regulator that provides power to the sensor > + > + vddio-supply: > + description: Regulator that provides power to the bus > + > + spi-max-frequency: true > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* Example for a I2C device node */ > + accelerometer@1d { > + compatible = "adi,adxl355"; > + reg = <0x1d>; > + interrupt-parent = <&gpio>; > + interrupts = <25 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "DRDY"; > + }; > + }; > + - | > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + accelerometer@0 { > + compatible = "adi,adxl355"; > + reg = <0>; > + spi-max-frequency = <1000000>; > + interrupt-parent = <&gpio>; > + interrupts = <25 IRQ_TYPE_EDGE_RISING>; > + interrupt-names = "DRDY"; > + }; > + }; > -- > 2.30.1 >
On Wed, 11 Aug 2021 13:00:26 +0530, Puranjay Mohan wrote: > Add devicetree binding document for ADXL355, a 3-Axis MEMS Accelerometer. > > Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> > --- > .../bindings/iio/accel/adi,adxl355.yaml | 88 +++++++++++++++++++ > 1 file changed, 88 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml new file mode 100644 index 000000000..ba54d6998 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer + +maintainers: + - Puranjay Mohan <puranjay12@gmail.com> + +description: | + Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports + both I2C & SPI interfaces + https://www.analog.com/en/products/adxl355.html + +properties: + compatible: + enum: + - adi,adxl355 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 3 + description: | + Type for DRDY should be IRQ_TYPE_EDGE_RISING. + Three configurable interrupt lines exist. + + interrupt-names: + description: Specify which interrupt line is in use. + items: + enum: + - INT1 + - INT2 + - DRDY + minItems: 1 + maxItems: 3 + + vdd-supply: + description: Regulator that provides power to the sensor + + vddio-supply: + description: Regulator that provides power to the bus + + spi-max-frequency: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@1d { + compatible = "adi,adxl355"; + reg = <0x1d>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "DRDY"; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "adi,adxl355"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "DRDY"; + }; + };
Add devicetree binding document for ADXL355, a 3-Axis MEMS Accelerometer. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> --- .../bindings/iio/accel/adi,adxl355.yaml | 88 +++++++++++++++++++ 1 file changed, 88 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml