[GIT,PULL] SCSI fixes for 5.14-rc5

Commit Message

James Bottomley Aug. 15, 2021, 3:12 a.m. UTC

Three minor fixes, all in drivers.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

The short changelog is:

Colin Ian King (1):
      scsi: mpt3sas: Fix incorrectly assigned error return and check

Ewan D. Milne (1):
      scsi: lpfc: Move initialization of phba->poll_list earlier to avoid crash

Michael Kelley (1):
      scsi: storvsc: Log TEST_UNIT_READY errors as warnings

And the diffstat:

 drivers/scsi/lpfc/lpfc_init.c       |  3 ++-
 drivers/scsi/mpt3sas/mpt3sas_base.c |  2 +-
 drivers/scsi/storvsc_drv.c          | 14 ++++++++++++--
 3 files changed, 15 insertions(+), 4 deletions(-)

With full diff below.

James

---

Comments

[e-mail] Aug. 15, 2021, 6:05 a.m. UTC | #1

The pull request you sent on Sat, 14 Aug 2021 23:12:55 -0400:

> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/0aa78d17099b04fd9d36fe338af48ad6fe2d7fca

Thank you!

Patch

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 5983e05b648f..e29523a1b530 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -13193,6 +13193,8 @@  lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
 	if (!phba)
 		return -ENOMEM;
 
+	INIT_LIST_HEAD(&phba->poll_list);
+
 	/* Perform generic PCI device enabling operation */
 	error = lpfc_enable_pci_dev(phba);
 	if (error)
@@ -13327,7 +13329,6 @@  lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
 	/* Enable RAS FW log support */
 	lpfc_sli4_ras_setup(phba);
 
-	INIT_LIST_HEAD(&phba->poll_list);
 	timer_setup(&phba->cpuhp_poll_timer, lpfc_sli4_poll_hbtimer, 0);
 	cpuhp_state_add_instance_nocalls(lpfc_cpuhp_state, &phba->cpuhp);
 
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 19b1c0cf5f2a..cf4a3a2c22ad 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -7851,7 +7851,7 @@  _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc)
 			return r;
 	}
 
-	rc = _base_static_config_pages(ioc);
+	r = _base_static_config_pages(ioc);
 	if (r)
 		return r;
 
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 328bb961c281..37506b3fe5a9 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1199,14 +1199,24 @@  static void storvsc_on_io_completion(struct storvsc_device *stor_device,
 		vstor_packet->vm_srb.sense_info_length);
 
 	if (vstor_packet->vm_srb.scsi_status != 0 ||
-	    vstor_packet->vm_srb.srb_status != SRB_STATUS_SUCCESS)
-		storvsc_log(device, STORVSC_LOGGING_ERROR,
+	    vstor_packet->vm_srb.srb_status != SRB_STATUS_SUCCESS) {
+
+		/*
+		 * Log TEST_UNIT_READY errors only as warnings. Hyper-V can
+		 * return errors when detecting devices using TEST_UNIT_READY,
+		 * and logging these as errors produces unhelpful noise.
+		 */
+		int loglevel = (stor_pkt->vm_srb.cdb[0] == TEST_UNIT_READY) ?
+			STORVSC_LOGGING_WARN : STORVSC_LOGGING_ERROR;
+
+		storvsc_log(device, loglevel,
 			"tag#%d cmd 0x%x status: scsi 0x%x srb 0x%x hv 0x%x\n",
 			request->cmd->request->tag,
 			stor_pkt->vm_srb.cdb[0],
 			vstor_packet->vm_srb.scsi_status,
 			vstor_packet->vm_srb.srb_status,
 			vstor_packet->status);
+	}
 
 	if (vstor_packet->vm_srb.scsi_status == SAM_STAT_CHECK_CONDITION &&
 	    (vstor_packet->vm_srb.srb_status & SRB_STATUS_AUTOSENSE_VALID))