| Message ID | 20210816104846.13155-2-billy_tsai@aspeedtech.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for ast2600 ADC | expand |
On Mon, 16 Aug 2021 18:48:32 +0800, Billy Tsai wrote: > Add device tree bindings document for the aspeed ast2600 adc device > driver. > > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> > --- > .../bindings/iio/adc/aspeed,ast2600-adc.yaml | 98 +++++++++++++++++++ > 1 file changed, 98 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml: properties:aspeed,int_vref_mv: 'oneOf' conditional failed, one must be fixed: 'type' is a required property hint: A vendor boolean property can use "type: boolean" Additional properties are not allowed ('enum' was unexpected) hint: A vendor boolean property can use "type: boolean" /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml: properties:aspeed,int_vref_mv: 'oneOf' conditional failed, one must be fixed: '$ref' is a required property 'allOf' is a required property hint: A vendor property needs a $ref to types.yaml from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# 1200 is not of type 'string' hint: A vendor string property with exact values has an implicit type 2500 is not of type 'string' hint: A vendor string property with exact values has an implicit type hint: Vendor specific properties must have a type and description unless they have a defined, common suffix. from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml: ignoring, error in schema: properties: aspeed,int_vref_mv warning: no schema found in file: ./Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.example.dt.yaml:0:0: /example-0/adc@1e6e9000: failed to match any schema with compatible: ['aspeed,ast2600-adc0'] Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.example.dt.yaml:0:0: /example-0/adc@1e6e9100: failed to match any schema with compatible: ['aspeed,ast2600-adc1'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1517123 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml new file mode 100644 index 000000000000..28bff89e0d75 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC that forms part of an ASPEED server management processor. + +maintainers: + - Billy Tsai <billy_tsai@aspeedtech.com> + +description: | + • 10-bits resolution for 16 voltage channels. + • The device split into two individual engine and each contains 8 voltage + channels. + • Channel scanning can be non-continuous. + • Programmable ADC clock frequency. + • Programmable upper and lower threshold for each channels. + • Interrupt when larger or less than threshold for each channels. + • Support hysteresis for each channels. + • Built-in a compensating method. + • Built-in a register to trim internal reference voltage. + • Internal or External reference voltage. + • Support 2 Internal reference voltage 1.2v or 2.5v. + • Integrate dividing circuit for battery sensing. + +properties: + compatible: + enum: + - aspeed,ast2600-adc0 + - aspeed,ast2600-adc1 + + reg: + maxItems: 1 + + clocks: + description: + Input clock used to derive the sample clock. Expected to be the + SoC's APB clock. + + resets: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + vref-supply: + description: + The external regulator supply ADC reference voltage. + + aspeed,int_vref_mv: + enum: + - 1200 + - 2500 + description: + ADC internal reference voltage in millivolts. + + aspeed,battery-sensing: + type: boolean + description: + Inform the driver that last channel will be used to sensor battery. + + aspeed,trim-data-valid: + type: boolean + description: | + The ADC reference voltage can be calibrated to obtain the trimming + data which will be stored in otp. This property informs the driver that + the data store in the otp is valid. + +required: + - compatible + - reg + - clocks + - resets + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ast2600-clock.h> + adc0: adc@1e6e9000 { + compatible = "aspeed,ast2600-adc0"; + reg = <0x1e6e9000 0x100>; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_ADC>; + #io-channel-cells = <1>; + aspeed,int_vref_mv = <2500>; + }; + adc1: adc@1e6e9100 { + compatible = "aspeed,ast2600-adc1"; + reg = <0x1e6e9100 0x100>; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_ADC>; + #io-channel-cells = <1>; + aspeed,int_vref_mv = <2500>; + }; +...
Add device tree bindings document for the aspeed ast2600 adc device driver. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> --- .../bindings/iio/adc/aspeed,ast2600-adc.yaml | 98 +++++++++++++++++++ 1 file changed, 98 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml