| Message ID | 20210812170025.67074-1-andriy.shevchenko@linux.intel.com (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Headers | show |
| Series | [v4,1/4] clk: fractional-divider: Export approximation algorithm to the CCF users | expand |
On Thu, Aug 12, 2021 at 12:56:35PM -0700, Stephen Boyd wrote: > Quoting Andy Shevchenko (2021-08-12 10:00:22) > > At least one user currently duplicates some functions that are provided > > by fractional divider module. Let's export approximation algorithm and > > replace the open-coded variant. > > > > As a bonus the exported function will get better documentation in place. > Applied to clk-next Thank you, Stephen!
On Fri, Aug 13, 2021 at 12:43:22PM +0300, Andy Shevchenko wrote: > On Thu, Aug 12, 2021 at 12:56:35PM -0700, Stephen Boyd wrote: > > Quoting Andy Shevchenko (2021-08-12 10:00:22) > > > At least one user currently duplicates some functions that are provided > > > by fractional divider module. Let's export approximation algorithm and > > > replace the open-coded variant. > > > > > > As a bonus the exported function will get better documentation in place. > > Applied to clk-next > > Thank you, Stephen! When they are expected to be visible in Linux Next?
From: Chris Morgan <macromorgan@hotmail.com>
Unfortunately, I can confirm this breaks the DSI panel on the Rockchip
PX30 (and possibly other SoCs). Tested on my Odroid Go Advance. When
I revert 4e7cf74fa3b2 "clk: fractional-divider: Export approximation
algorithm to the CCF users" and 928f9e268611 "clk: fractional-divider:
Hide clk_fractional_divider_ops from wide audience" the panel begins
working again as expected on the master branch.
It looks like an assumption is made in the vop_crtc_mode_fixup()
function in the rockchip_drm_vop.c that gets broken with this change.
Specifically, the function says in the comments "When DRM gives us a
mode, we should add 999 Hz to it.". I believe this is no longer true
after this clk change, and when I remove the + 999 from the function
the DSI panel works again. Note that I do not know the implications
of removing this 999 aside from that it fixes the DSI panel on my
PX30 after this change, so I don't know if it's a positive change
or not.
Thank you.
On Tue, Sep 07, 2021 at 10:44:00AM -0500, Chris Morgan wrote: > From: Chris Morgan <macromorgan@hotmail.com> > > Unfortunately, I can confirm this breaks the DSI panel on the Rockchip > PX30 (and possibly other SoCs). Tested on my Odroid Go Advance. When > I revert 4e7cf74fa3b2 "clk: fractional-divider: Export approximation > algorithm to the CCF users" and 928f9e268611 "clk: fractional-divider: > Hide clk_fractional_divider_ops from wide audience" the panel begins > working again as expected on the master branch. > > It looks like an assumption is made in the vop_crtc_mode_fixup() > function in the rockchip_drm_vop.c that gets broken with this change. > Specifically, the function says in the comments "When DRM gives us a > mode, we should add 999 Hz to it.". I believe this is no longer true > after this clk change, and when I remove the + 999 from the function > the DSI panel works again. Note that I do not know the implications > of removing this 999 aside from that it fixes the DSI panel on my > PX30 after this change, so I don't know if it's a positive change > or not. > > Thank you. Thank you for the report! I'll check this. Perhaps Heiko can help with testing as well on his side.
On Tue, Sep 07, 2021 at 08:54:04PM +0300, Andy Shevchenko wrote: > On Tue, Sep 07, 2021 at 10:44:00AM -0500, Chris Morgan wrote: > > From: Chris Morgan <macromorgan@hotmail.com> > > > > Unfortunately, I can confirm this breaks the DSI panel on the Rockchip > > PX30 (and possibly other SoCs). Tested on my Odroid Go Advance. When > > I revert 4e7cf74fa3b2 "clk: fractional-divider: Export approximation > > algorithm to the CCF users" and 928f9e268611 "clk: fractional-divider: > > Hide clk_fractional_divider_ops from wide audience" the panel begins > > working again as expected on the master branch. > > > > It looks like an assumption is made in the vop_crtc_mode_fixup() > > function in the rockchip_drm_vop.c that gets broken with this change. > > Specifically, the function says in the comments "When DRM gives us a > > mode, we should add 999 Hz to it.". I believe this is no longer true > > after this clk change, and when I remove the + 999 from the function > > the DSI panel works again. Note that I do not know the implications > > of removing this 999 aside from that it fixes the DSI panel on my > > PX30 after this change, so I don't know if it's a positive change > > or not. > > > > Thank you. > > Thank you for the report! > > I'll check this. Perhaps Heiko can help with testing as well on his side. On the first glance the mentioned patch may not be the culprit because it does not change the functional behaviour (if I'm not mistaken). What really changes it is the additional flag that removes the left-shift of the rate in the calculations. To me sounds like you found a proper solution to the issue and that +999 is a hack against the (blindly?) copied part of the algorithm used in fractional divider. Have you read the top comment in clk-fractional-divider.c? It should explain how it works after my series. In any case I'm not going to come to any conclusions right now and also want to hear from people who have better understanding of this hardware.
On Tue, Sep 07, 2021 at 09:17:47PM -0500, Chris Morgan wrote: > On Tue, Sep 07, 2021 at 09:06:10PM +0300, Andy Shevchenko wrote: > > On Tue, Sep 07, 2021 at 08:54:04PM +0300, Andy Shevchenko wrote: > > > On Tue, Sep 07, 2021 at 10:44:00AM -0500, Chris Morgan wrote: > > > > Unfortunately, I can confirm this breaks the DSI panel on the Rockchip > > > > PX30 (and possibly other SoCs). Tested on my Odroid Go Advance. When > > > > I revert 4e7cf74fa3b2 "clk: fractional-divider: Export approximation > > > > algorithm to the CCF users" and 928f9e268611 "clk: fractional-divider: > > > > Hide clk_fractional_divider_ops from wide audience" the panel begins > > > > working again as expected on the master branch. > > > > > > > > It looks like an assumption is made in the vop_crtc_mode_fixup() > > > > function in the rockchip_drm_vop.c that gets broken with this change. > > > > Specifically, the function says in the comments "When DRM gives us a > > > > mode, we should add 999 Hz to it.". I believe this is no longer true > > > > after this clk change, and when I remove the + 999 from the function > > > > the DSI panel works again. Note that I do not know the implications > > > > of removing this 999 aside from that it fixes the DSI panel on my > > > > PX30 after this change, so I don't know if it's a positive change > > > > or not. > > > > > > Thank you for the report! > > > > > > I'll check this. Perhaps Heiko can help with testing as well on his side. > > > > On the first glance the mentioned patch may not be the culprit because it does > > not change the functional behaviour (if I'm not mistaken). What really changes > > it is the additional flag that removes the left-shift of the rate in the > > calculations. > > I noticed the behavior on the 5.14 kernel was to set the numerator at > an ungodly 7649082492112076800 and the denominator at 1 (no, that's not > a typo). I think it tried to write 65535 to the register though, but it > would go through this a few times and eventually settle on 1:1 as the > fractional ratio (which I assume is all good, because that would work). > > Contrast this to the 5.15 behavior where it would try to set the ratio > to 17001:17000, which would cause the DSI screen to fail to initalize. > > After tracing through the code I figured out that the VOP was trying to > add 999 to the clock and set it at 17000999. 17000000/17000999 gives us > 0, and subtracting 1 from that gives us a -1. The fls_long function > would then return 64, and if we subtract 16 (the value of fd->mwidth > for my board) it would tell us to shift the 17000999 48 bits to the > left, which matches the ungodly large number. > > With the changes in 5.15 if I remove the + 999 from the VOP driver the > clock then gets set at 17000000, since the parent is at 17000000 that > gives us a 1:1 where everything works and everything is fine. > > Long story short I think this is a bug that's existed all along, and > this change simply exposed it in a manner where it stopped working > despite the bug being present. Unfortunately I neither know enough > about the hardware to be confident in this fix beyond my specific > board, nor do I have enough hardware to test it on anything except > a Rockchip rk3326 with a DSI panel. This is a very good analysis! > > To me sounds like you found a proper solution to the issue and that +999 is > > a hack against the (blindly?) copied part of the algorithm used in fractional > > divider. Have you read the top comment in clk-fractional-divider.c? It should > > explain how it works after my series. > > No, but I probably should read the docs more. I just stumbled on this > series doing a bisect when the DSI panel stopped working. > > > In any case I'm not going to come to any conclusions right now and also want > > to hear from people who have better understanding of this hardware. > > Yeah, I want to see what Heiko says after some more research, or anyone > who has more familiarity with clocks/DRM than I do or who has more > hardware to test on than I do. After what I read above I can't add anything and what I think is the best course of actions is to submit a patch with removal of +999 part and above explanation. It would be nice to find the real commit ID that may be used for a Fixes tag. Then we at least will have a patch ready in case it's considered correct by people from Rockchip side. > I intended to send a message informing you that "hey, this breaks > upstream", but I think it turns out it's more a matter of "hey, > this makes a broken upstream break instead of limp along". Understand.
diff --git a/drivers/clk/clk-fractional-divider.c b/drivers/clk/clk-fractional-divider.c index b1e556f20911..535d299af646 100644 --- a/drivers/clk/clk-fractional-divider.c +++ b/drivers/clk/clk-fractional-divider.c @@ -14,6 +14,8 @@ #include <linux/slab.h> #include <linux/rational.h> +#include "clk-fractional-divider.h" + static inline u32 clk_fd_readl(struct clk_fractional_divider *fd) { if (fd->flags & CLK_FRAC_DIVIDER_BIG_ENDIAN) @@ -68,9 +70,10 @@ static unsigned long clk_fd_recalc_rate(struct clk_hw *hw, return ret; } -static void clk_fd_general_approximation(struct clk_hw *hw, unsigned long rate, - unsigned long *parent_rate, - unsigned long *m, unsigned long *n) +void clk_fractional_divider_general_approximation(struct clk_hw *hw, + unsigned long rate, + unsigned long *parent_rate, + unsigned long *m, unsigned long *n) { struct clk_fractional_divider *fd = to_clk_fd(hw); unsigned long scale; @@ -102,7 +105,7 @@ static long clk_fd_round_rate(struct clk_hw *hw, unsigned long rate, if (fd->approximation) fd->approximation(hw, rate, parent_rate, &m, &n); else - clk_fd_general_approximation(hw, rate, parent_rate, &m, &n); + clk_fractional_divider_general_approximation(hw, rate, parent_rate, &m, &n); ret = (u64)*parent_rate * m; do_div(ret, n); diff --git a/drivers/clk/clk-fractional-divider.h b/drivers/clk/clk-fractional-divider.h new file mode 100644 index 000000000000..4fa359a12ef4 --- /dev/null +++ b/drivers/clk/clk-fractional-divider.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +struct clk_hw; + +void clk_fractional_divider_general_approximation(struct clk_hw *hw, + unsigned long rate, + unsigned long *parent_rate, + unsigned long *m, + unsigned long *n); diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c index 049e5e0b64f6..b7be7e11b0df 100644 --- a/drivers/clk/rockchip/clk.c +++ b/drivers/clk/rockchip/clk.c @@ -22,6 +22,8 @@ #include <linux/regmap.h> #include <linux/reboot.h> #include <linux/rational.h> + +#include "../clk-fractional-divider.h" #include "clk.h" /* @@ -178,10 +180,8 @@ static void rockchip_fractional_approximation(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate, unsigned long *m, unsigned long *n) { - struct clk_fractional_divider *fd = to_clk_fd(hw); unsigned long p_rate, p_parent_rate; struct clk_hw *p_parent; - unsigned long scale; p_rate = clk_hw_get_rate(clk_hw_get_parent(hw)); if ((rate * 20 > p_rate) && (p_rate % rate != 0)) { @@ -190,18 +190,7 @@ static void rockchip_fractional_approximation(struct clk_hw *hw, *parent_rate = p_parent_rate; } - /* - * Get rate closer to *parent_rate to guarantee there is no overflow - * for m and n. In the result it will be the nearest rate left shifted - * by (scale - fd->nwidth) bits. - */ - scale = fls_long(*parent_rate / rate - 1); - if (scale > fd->nwidth) - rate <<= scale - fd->nwidth; - - rational_best_approximation(rate, *parent_rate, - GENMASK(fd->mwidth - 1, 0), GENMASK(fd->nwidth - 1, 0), - m, n); + clk_fractional_divider_general_approximation(hw, rate, parent_rate, m, n); } static struct clk *rockchip_clk_register_frac_branch(