| Message ID | 20210813043131.833006-1-icenowy@aosc.io (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | usb: typec: tcpm: always rediscover when swapping DR | expand |
On Fri, Aug 13, 2021 at 12:31:31PM +0800, Icenowy Zheng wrote: > Currently, TCPM code omits discover when swapping to gadget, and assume > that no altmodes are available when swapping from gadget. However, we do > send discover when we get attached as gadget -- this leads to modes to be > discovered twice when attached as gadget and then swap to host. > > Always re-send discover when swapping DR, regardless of what change is > being made; and because of this, the assumption that no altmodes are > registered with gadget role is broken, and altmodes de-registeration is > always needed now. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > --- > drivers/usb/typec/tcpm/tcpm.c | 9 ++++----- > 1 file changed, 4 insertions(+), 5 deletions(-) > > diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c > index b9bb63d749ec..ab6d0d51ee1c 100644 > --- a/drivers/usb/typec/tcpm/tcpm.c > +++ b/drivers/usb/typec/tcpm/tcpm.c > @@ -4495,15 +4495,14 @@ static void run_state_machine(struct tcpm_port *port) > tcpm_set_state(port, ready_state(port), 0); > break; > case DR_SWAP_CHANGE_DR: > - if (port->data_role == TYPEC_HOST) { > - tcpm_unregister_altmodes(port); > + tcpm_unregister_altmodes(port); > + if (port->data_role == TYPEC_HOST) > tcpm_set_roles(port, true, port->pwr_role, > TYPEC_DEVICE); > - } else { > + else > tcpm_set_roles(port, true, port->pwr_role, > TYPEC_HOST); > - port->send_discover = true; > - } > + port->send_discover = true; > tcpm_ams_finish(port); > tcpm_set_state(port, ready_state(port), 0); > break; Why is it necessary to do discovery with data role swap in general? thanks,
于 2021年8月17日 GMT+08:00 下午5:36:27, Heikki Krogerus <heikki.krogerus@linux.intel.com> 写到: >On Fri, Aug 13, 2021 at 12:31:31PM +0800, Icenowy Zheng wrote: >> Currently, TCPM code omits discover when swapping to gadget, and assume >> that no altmodes are available when swapping from gadget. However, we do >> send discover when we get attached as gadget -- this leads to modes to be >> discovered twice when attached as gadget and then swap to host. >> >> Always re-send discover when swapping DR, regardless of what change is >> being made; and because of this, the assumption that no altmodes are >> registered with gadget role is broken, and altmodes de-registeration is >> always needed now. >> >> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> >> --- >> drivers/usb/typec/tcpm/tcpm.c | 9 ++++----- >> 1 file changed, 4 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c >> index b9bb63d749ec..ab6d0d51ee1c 100644 >> --- a/drivers/usb/typec/tcpm/tcpm.c >> +++ b/drivers/usb/typec/tcpm/tcpm.c >> @@ -4495,15 +4495,14 @@ static void run_state_machine(struct tcpm_port *port) >> tcpm_set_state(port, ready_state(port), 0); >> break; >> case DR_SWAP_CHANGE_DR: >> - if (port->data_role == TYPEC_HOST) { >> - tcpm_unregister_altmodes(port); >> + tcpm_unregister_altmodes(port); >> + if (port->data_role == TYPEC_HOST) >> tcpm_set_roles(port, true, port->pwr_role, >> TYPEC_DEVICE); >> - } else { >> + else >> tcpm_set_roles(port, true, port->pwr_role, >> TYPEC_HOST); >> - port->send_discover = true; >> - } >> + port->send_discover = true; >> tcpm_ams_finish(port); >> tcpm_set_state(port, ready_state(port), 0); >> break; > >Why is it necessary to do discovery with data role swap in general? I think it could be possible for devices to expose different altmode with different role. > >thanks, >
> >Why is it necessary to do discovery with data role swap in general? > > I think it could be possible for devices to expose different altmode > with different role. OK. FWIW: Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> thanks,
On 8/17/21 2:36 AM, Heikki Krogerus wrote: > On Fri, Aug 13, 2021 at 12:31:31PM +0800, Icenowy Zheng wrote: >> Currently, TCPM code omits discover when swapping to gadget, and assume >> that no altmodes are available when swapping from gadget. However, we do >> send discover when we get attached as gadget -- this leads to modes to be >> discovered twice when attached as gadget and then swap to host. >> >> Always re-send discover when swapping DR, regardless of what change is >> being made; and because of this, the assumption that no altmodes are >> registered with gadget role is broken, and altmodes de-registeration is >> always needed now. >> >> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> >> --- >> drivers/usb/typec/tcpm/tcpm.c | 9 ++++----- >> 1 file changed, 4 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c >> index b9bb63d749ec..ab6d0d51ee1c 100644 >> --- a/drivers/usb/typec/tcpm/tcpm.c >> +++ b/drivers/usb/typec/tcpm/tcpm.c >> @@ -4495,15 +4495,14 @@ static void run_state_machine(struct tcpm_port *port) >> tcpm_set_state(port, ready_state(port), 0); >> break; >> case DR_SWAP_CHANGE_DR: >> - if (port->data_role == TYPEC_HOST) { >> - tcpm_unregister_altmodes(port); >> + tcpm_unregister_altmodes(port); >> + if (port->data_role == TYPEC_HOST) >> tcpm_set_roles(port, true, port->pwr_role, >> TYPEC_DEVICE); >> - } else { >> + else >> tcpm_set_roles(port, true, port->pwr_role, >> TYPEC_HOST); >> - port->send_discover = true; >> - } >> + port->send_discover = true; >> tcpm_ams_finish(port); >> tcpm_set_state(port, ready_state(port), 0); >> break; > > Why is it necessary to do discovery with data role swap in general? > > thanks, > Additional question: There are two patches pending related to DR_SWAP and discovery. Are they both needed, or do they both solve the same problem ? Thanks, Guenter
On Tue, Aug 17, 2021 at 11:13 PM Guenter Roeck <linux@roeck-us.net> wrote: > > On 8/17/21 2:36 AM, Heikki Krogerus wrote: > > On Fri, Aug 13, 2021 at 12:31:31PM +0800, Icenowy Zheng wrote: > >> Currently, TCPM code omits discover when swapping to gadget, and assume > >> that no altmodes are available when swapping from gadget. However, we do > >> send discover when we get attached as gadget -- this leads to modes to be > >> discovered twice when attached as gadget and then swap to host. > >> > >> Always re-send discover when swapping DR, regardless of what change is > >> being made; and because of this, the assumption that no altmodes are > >> registered with gadget role is broken, and altmodes de-registeration is > >> always needed now. > >> > >> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > >> --- > >> drivers/usb/typec/tcpm/tcpm.c | 9 ++++----- > >> 1 file changed, 4 insertions(+), 5 deletions(-) > >> > >> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c > >> index b9bb63d749ec..ab6d0d51ee1c 100644 > >> --- a/drivers/usb/typec/tcpm/tcpm.c > >> +++ b/drivers/usb/typec/tcpm/tcpm.c > >> @@ -4495,15 +4495,14 @@ static void run_state_machine(struct tcpm_port *port) > >> tcpm_set_state(port, ready_state(port), 0); > >> break; > >> case DR_SWAP_CHANGE_DR: > >> - if (port->data_role == TYPEC_HOST) { > >> - tcpm_unregister_altmodes(port); > >> + tcpm_unregister_altmodes(port); > >> + if (port->data_role == TYPEC_HOST) > >> tcpm_set_roles(port, true, port->pwr_role, > >> TYPEC_DEVICE); > >> - } else { > >> + else > >> tcpm_set_roles(port, true, port->pwr_role, > >> TYPEC_HOST); > >> - port->send_discover = true; > >> - } > >> + port->send_discover = true; > >> tcpm_ams_finish(port); > >> tcpm_set_state(port, ready_state(port), 0); > >> break; > > > > Why is it necessary to do discovery with data role swap in general? > > > > thanks, > > > > Additional question: There are two patches pending related to DR_SWAP > and discovery. Are they both needed, or do they both solve the same > problem ? > > Thanks, > Guenter Hi, I just noticed this patch. Part of this patch and part of my patch https://lore.kernel.org/r/20210816075449.2236547-1-kyletso@google.com are to solve the same problem that Discover_Identity is not sent in a case where the port becomes UFP after DR_SWAP while in PD3. The difference (for the DR_SWAP part) is that my patch does not set the flag "send_discover" if the port becomes UFP after PD2 DR_SWAP. That is because in PD2 Spec, UFP is not allowed to be the SVDM Initiator. This patch indeed solves another problem where tcpm_unregister_altmodes should be called during PD3 DR_SWAP because the port partner may return mode data in the latest Discover_Mode. For the PD2 case, I don't think it needs to be called because PD2 DFP will always return NAK for Discover_Mode. However it is fine because it is safe to call tcpm_unregister_altmodes even if there is no mode data. In fact, when I was tracing the code I found another bug. PD2 UFP is not allowed to send Discover_Identity and Discover_Mode. I can send another patch to address this problem. thanks, Kyle
On Wed, Aug 18, 2021 at 4:02 PM Kyle Tso <kyletso@google.com> wrote: > > On Tue, Aug 17, 2021 at 11:13 PM Guenter Roeck <linux@roeck-us.net> wrote: > > > > On 8/17/21 2:36 AM, Heikki Krogerus wrote: > > > On Fri, Aug 13, 2021 at 12:31:31PM +0800, Icenowy Zheng wrote: > > >> Currently, TCPM code omits discover when swapping to gadget, and assume > > >> that no altmodes are available when swapping from gadget. However, we do > > >> send discover when we get attached as gadget -- this leads to modes to be > > >> discovered twice when attached as gadget and then swap to host. > > >> > > >> Always re-send discover when swapping DR, regardless of what change is > > >> being made; and because of this, the assumption that no altmodes are > > >> registered with gadget role is broken, and altmodes de-registeration is > > >> always needed now. > > >> > > >> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > > >> --- > > >> drivers/usb/typec/tcpm/tcpm.c | 9 ++++----- > > >> 1 file changed, 4 insertions(+), 5 deletions(-) > > >> > > >> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c > > >> index b9bb63d749ec..ab6d0d51ee1c 100644 > > >> --- a/drivers/usb/typec/tcpm/tcpm.c > > >> +++ b/drivers/usb/typec/tcpm/tcpm.c > > >> @@ -4495,15 +4495,14 @@ static void run_state_machine(struct tcpm_port *port) > > >> tcpm_set_state(port, ready_state(port), 0); > > >> break; > > >> case DR_SWAP_CHANGE_DR: > > >> - if (port->data_role == TYPEC_HOST) { > > >> - tcpm_unregister_altmodes(port); > > >> + tcpm_unregister_altmodes(port); > > >> + if (port->data_role == TYPEC_HOST) > > >> tcpm_set_roles(port, true, port->pwr_role, > > >> TYPEC_DEVICE); > > >> - } else { > > >> + else > > >> tcpm_set_roles(port, true, port->pwr_role, > > >> TYPEC_HOST); > > >> - port->send_discover = true; > > >> - } > > >> + port->send_discover = true; > > >> tcpm_ams_finish(port); > > >> tcpm_set_state(port, ready_state(port), 0); > > >> break; > > > > > > Why is it necessary to do discovery with data role swap in general? > > > > > > thanks, > > > > > > > Additional question: There are two patches pending related to DR_SWAP > > and discovery. Are they both needed, or do they both solve the same > > problem ? > > > > Thanks, > > Guenter > > Hi, I just noticed this patch. > > Part of this patch and part of my patch > https://lore.kernel.org/r/20210816075449.2236547-1-kyletso@google.com > are to solve the same problem that Discover_Identity is not sent in a > case where the port becomes UFP after DR_SWAP while in PD3. > > The difference (for the DR_SWAP part) is that my patch does not set > the flag "send_discover" if the port becomes UFP after PD2 DR_SWAP. > That is because in PD2 Spec, UFP is not allowed to be the SVDM > Initiator. > "in PD2 Spec, UFP is not allowed to be the SVDM Initiator." Sorry this is not correct. The exception is for the cable discovery. But it doesn't matter here because tcpm.c doesn't support cable discovery. thanks, Kyle > This patch indeed solves another problem where > tcpm_unregister_altmodes should be called during PD3 DR_SWAP because > the port partner may return mode data in the latest Discover_Mode. For > the PD2 case, I don't think it needs to be called because PD2 DFP will > always return NAK for Discover_Mode. However it is fine because it is > safe to call tcpm_unregister_altmodes even if there is no mode data. > > In fact, when I was tracing the code I found another bug. PD2 UFP is > not allowed to send Discover_Identity and Discover_Mode. I can send > another patch to address this problem. > > thanks, > Kyle
于 2021年8月18日 GMT+08:00 下午4:02:24, Kyle Tso <kyletso@google.com> 写到: >On Tue, Aug 17, 2021 at 11:13 PM Guenter Roeck <linux@roeck-us.net> wrote: >> >> On 8/17/21 2:36 AM, Heikki Krogerus wrote: >> > On Fri, Aug 13, 2021 at 12:31:31PM +0800, Icenowy Zheng wrote: >> >> Currently, TCPM code omits discover when swapping to gadget, and assume >> >> that no altmodes are available when swapping from gadget. However, we do >> >> send discover when we get attached as gadget -- this leads to modes to be >> >> discovered twice when attached as gadget and then swap to host. >> >> >> >> Always re-send discover when swapping DR, regardless of what change is >> >> being made; and because of this, the assumption that no altmodes are >> >> registered with gadget role is broken, and altmodes de-registeration is >> >> always needed now. >> >> >> >> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> >> >> --- >> >> drivers/usb/typec/tcpm/tcpm.c | 9 ++++----- >> >> 1 file changed, 4 insertions(+), 5 deletions(-) >> >> >> >> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c >> >> index b9bb63d749ec..ab6d0d51ee1c 100644 >> >> --- a/drivers/usb/typec/tcpm/tcpm.c >> >> +++ b/drivers/usb/typec/tcpm/tcpm.c >> >> @@ -4495,15 +4495,14 @@ static void run_state_machine(struct tcpm_port *port) >> >> tcpm_set_state(port, ready_state(port), 0); >> >> break; >> >> case DR_SWAP_CHANGE_DR: >> >> - if (port->data_role == TYPEC_HOST) { >> >> - tcpm_unregister_altmodes(port); >> >> + tcpm_unregister_altmodes(port); >> >> + if (port->data_role == TYPEC_HOST) >> >> tcpm_set_roles(port, true, port->pwr_role, >> >> TYPEC_DEVICE); >> >> - } else { >> >> + else >> >> tcpm_set_roles(port, true, port->pwr_role, >> >> TYPEC_HOST); >> >> - port->send_discover = true; >> >> - } >> >> + port->send_discover = true; >> >> tcpm_ams_finish(port); >> >> tcpm_set_state(port, ready_state(port), 0); >> >> break; >> > >> > Why is it necessary to do discovery with data role swap in general? >> > >> > thanks, >> > >> >> Additional question: There are two patches pending related to DR_SWAP >> and discovery. Are they both needed, or do they both solve the same >> problem ? >> >> Thanks, >> Guenter > >Hi, I just noticed this patch. > >Part of this patch and part of my patch >https://lore.kernel.org/r/20210816075449.2236547-1-kyletso@google.com >are to solve the same problem that Discover_Identity is not sent in a >case where the port becomes UFP after DR_SWAP while in PD3. > >The difference (for the DR_SWAP part) is that my patch does not set >the flag "send_discover" if the port becomes UFP after PD2 DR_SWAP. >That is because in PD2 Spec, UFP is not allowed to be the SVDM >Initiator. > >This patch indeed solves another problem where >tcpm_unregister_altmodes should be called during PD3 DR_SWAP because >the port partner may return mode data in the latest Discover_Mode. For >the PD2 case, I don't think it needs to be called because PD2 DFP will >always return NAK for Discover_Mode. However it is fine because it is >safe to call tcpm_unregister_altmodes even if there is no mode data. > >In fact, when I was tracing the code I found another bug. PD2 UFP is >not allowed to send Discover_Identity and Discover_Mode. I can send >another patch to address this problem. Well, to be honest, it's why I send this patch. I didn't read PD spec before, so I assumed UFP is okay to send discover, and this is what I got wrong. I should remove the discover sending flag when we attach as sink. Will it be okay for me to send this patch? It should help my device here. > >thanks, >Kyle
于 2021年8月18日 GMT+08:00 下午4:02:24, Kyle Tso <kyletso@google.com> 写到: >On Tue, Aug 17, 2021 at 11:13 PM Guenter Roeck <linux@roeck-us.net> wrote: >> >> On 8/17/21 2:36 AM, Heikki Krogerus wrote: >> > On Fri, Aug 13, 2021 at 12:31:31PM +0800, Icenowy Zheng wrote: >> >> Currently, TCPM code omits discover when swapping to gadget, and assume >> >> that no altmodes are available when swapping from gadget. However, we do >> >> send discover when we get attached as gadget -- this leads to modes to be >> >> discovered twice when attached as gadget and then swap to host. >> >> >> >> Always re-send discover when swapping DR, regardless of what change is >> >> being made; and because of this, the assumption that no altmodes are >> >> registered with gadget role is broken, and altmodes de-registeration is >> >> always needed now. >> >> >> >> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> >> >> --- >> >> drivers/usb/typec/tcpm/tcpm.c | 9 ++++----- >> >> 1 file changed, 4 insertions(+), 5 deletions(-) >> >> >> >> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c >> >> index b9bb63d749ec..ab6d0d51ee1c 100644 >> >> --- a/drivers/usb/typec/tcpm/tcpm.c >> >> +++ b/drivers/usb/typec/tcpm/tcpm.c >> >> @@ -4495,15 +4495,14 @@ static void run_state_machine(struct tcpm_port *port) >> >> tcpm_set_state(port, ready_state(port), 0); >> >> break; >> >> case DR_SWAP_CHANGE_DR: >> >> - if (port->data_role == TYPEC_HOST) { >> >> - tcpm_unregister_altmodes(port); >> >> + tcpm_unregister_altmodes(port); >> >> + if (port->data_role == TYPEC_HOST) >> >> tcpm_set_roles(port, true, port->pwr_role, >> >> TYPEC_DEVICE); >> >> - } else { >> >> + else >> >> tcpm_set_roles(port, true, port->pwr_role, >> >> TYPEC_HOST); >> >> - port->send_discover = true; >> >> - } >> >> + port->send_discover = true; >> >> tcpm_ams_finish(port); >> >> tcpm_set_state(port, ready_state(port), 0); >> >> break; >> > >> > Why is it necessary to do discovery with data role swap in general? >> > >> > thanks, >> > >> >> Additional question: There are two patches pending related to DR_SWAP >> and discovery. Are they both needed, or do they both solve the same >> problem ? >> >> Thanks, >> Guenter > >Hi, I just noticed this patch. > >Part of this patch and part of my patch >https://lore.kernel.org/r/20210816075449.2236547-1-kyletso@google.com >are to solve the same problem that Discover_Identity is not sent in a >case where the port becomes UFP after DR_SWAP while in PD3. > >The difference (for the DR_SWAP part) is that my patch does not set >the flag "send_discover" if the port becomes UFP after PD2 DR_SWAP. >That is because in PD2 Spec, UFP is not allowed to be the SVDM >Initiator. > >This patch indeed solves another problem where >tcpm_unregister_altmodes should be called during PD3 DR_SWAP because >the port partner may return mode data in the latest Discover_Mode. For >the PD2 case, I don't think it needs to be called because PD2 DFP will >always return NAK for Discover_Mode. However it is fine because it is It sounds like my dock is doing something against the specification... It sends altmodes rather than NAK when my board gets attached as UFP and send bogus discovers (because of bugs of current TCPM code). These altmodes are then registered in TCPM and never get cleaned up within it, which leads to conflict when the dock is removed and then re-inserted. (BTW is it neceesary for data role and power role to be the same when attaching? My board now gets attached as UFP to drain power, and then do DR_SWAP to become USB host.) >safe to call tcpm_unregister_altmodes even if there is no mode data. > >In fact, when I was tracing the code I found another bug. PD2 UFP is >not allowed to send Discover_Identity and Discover_Mode. I can send >another patch to address this problem. > >thanks, >Kyle
On Wed, Aug 18, 2021 at 5:27 PM Icenowy Zheng <icenowy@aosc.io> wrote: > > > > 于 2021年8月18日 GMT+08:00 下午4:02:24, Kyle Tso <kyletso@google.com> 写到: > >On Tue, Aug 17, 2021 at 11:13 PM Guenter Roeck <linux@roeck-us.net> wrote: > >> > >> On 8/17/21 2:36 AM, Heikki Krogerus wrote: > >> > On Fri, Aug 13, 2021 at 12:31:31PM +0800, Icenowy Zheng wrote: > >> >> Currently, TCPM code omits discover when swapping to gadget, and assume > >> >> that no altmodes are available when swapping from gadget. However, we do > >> >> send discover when we get attached as gadget -- this leads to modes to be > >> >> discovered twice when attached as gadget and then swap to host. > >> >> > >> >> Always re-send discover when swapping DR, regardless of what change is > >> >> being made; and because of this, the assumption that no altmodes are > >> >> registered with gadget role is broken, and altmodes de-registeration is > >> >> always needed now. > >> >> > >> >> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > >> >> --- > >> >> drivers/usb/typec/tcpm/tcpm.c | 9 ++++----- > >> >> 1 file changed, 4 insertions(+), 5 deletions(-) > >> >> > >> >> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c > >> >> index b9bb63d749ec..ab6d0d51ee1c 100644 > >> >> --- a/drivers/usb/typec/tcpm/tcpm.c > >> >> +++ b/drivers/usb/typec/tcpm/tcpm.c > >> >> @@ -4495,15 +4495,14 @@ static void run_state_machine(struct tcpm_port *port) > >> >> tcpm_set_state(port, ready_state(port), 0); > >> >> break; > >> >> case DR_SWAP_CHANGE_DR: > >> >> - if (port->data_role == TYPEC_HOST) { > >> >> - tcpm_unregister_altmodes(port); > >> >> + tcpm_unregister_altmodes(port); > >> >> + if (port->data_role == TYPEC_HOST) > >> >> tcpm_set_roles(port, true, port->pwr_role, > >> >> TYPEC_DEVICE); > >> >> - } else { > >> >> + else > >> >> tcpm_set_roles(port, true, port->pwr_role, > >> >> TYPEC_HOST); > >> >> - port->send_discover = true; > >> >> - } > >> >> + port->send_discover = true; > >> >> tcpm_ams_finish(port); > >> >> tcpm_set_state(port, ready_state(port), 0); > >> >> break; > >> > > >> > Why is it necessary to do discovery with data role swap in general? > >> > > >> > thanks, > >> > > >> > >> Additional question: There are two patches pending related to DR_SWAP > >> and discovery. Are they both needed, or do they both solve the same > >> problem ? > >> > >> Thanks, > >> Guenter > > > >Hi, I just noticed this patch. > > > >Part of this patch and part of my patch > >https://lore.kernel.org/r/20210816075449.2236547-1-kyletso@google.com > >are to solve the same problem that Discover_Identity is not sent in a > >case where the port becomes UFP after DR_SWAP while in PD3. > > > >The difference (for the DR_SWAP part) is that my patch does not set > >the flag "send_discover" if the port becomes UFP after PD2 DR_SWAP. > >That is because in PD2 Spec, UFP is not allowed to be the SVDM > >Initiator. > > > >This patch indeed solves another problem where > >tcpm_unregister_altmodes should be called during PD3 DR_SWAP because > >the port partner may return mode data in the latest Discover_Mode. For > >the PD2 case, I don't think it needs to be called because PD2 DFP will > >always return NAK for Discover_Mode. However it is fine because it is > > It sounds like my dock is doing something against the specification... > > It sends altmodes rather than NAK when my board gets attached as > UFP and send bogus discovers (because of bugs of current TCPM > code). These altmodes are then registered in TCPM and never get > cleaned up within it, which leads to conflict when the dock is > removed and then re-inserted. > Could you provide more details? 1. Is the connection in PD3 ? 2. Could you provide the tcpm logs? > (BTW is it neceesary for data role and power role to be the same > when attaching? My board now gets attached as UFP to drain > power, and then do DR_SWAP to become USB host.) > Either Sink/UFP or Source/DFP in the beginning. Then DR_SWAP is okay when both ports are in ready state. Your dock looks like a Sourcing Device. Type-C Spec: ``` 4.8.4 Sourcing Device A Sourcing Device is a special sub-class of a DRP that is capable of supplying power, but is not capable of acting as a USB host. For example a hub’s UFP or a monitor’s UFP that operates as a device but not as a host. The Sourcing Device shall follow the rules for a DRP (See Section 4.5.1.4 and Figure 4-15). It shall also follow the requirements for the Source as Power Source (See Section 4.8.1). The Sourcing Device shall support USB PD and shall support the DR_Swap command in order to enable the Source to assume the UFP data role. ``` thanks, Kyle > >safe to call tcpm_unregister_altmodes even if there is no mode data. > > > >In fact, when I was tracing the code I found another bug. PD2 UFP is > >not allowed to send Discover_Identity and Discover_Mode. I can send > >another patch to address this problem. > > > >thanks, > >Kyle
On Tue, Aug 17, 2021 at 02:00:33PM +0300, Heikki Krogerus wrote: > > >Why is it necessary to do discovery with data role swap in general? > > > > I think it could be possible for devices to expose different altmode > > with different role. > > OK. FWIW: > > Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Is this conflicting with https://lore.kernel.org/r/20210816075449.2236547-1-kyletso@google.com ? Which of these two should I take, both? Neither? confused, greg k-h
于 2021年8月18日 GMT+08:00 下午9:56:38, Greg Kroah-Hartman <gregkh@linuxfoundation.org> 写到: >On Tue, Aug 17, 2021 at 02:00:33PM +0300, Heikki Krogerus wrote: >> > >Why is it necessary to do discovery with data role swap in general? >> > >> > I think it could be possible for devices to expose different altmode >> > with different role. >> >> OK. FWIW: >> >> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > >Is this conflicting with https://lore.kernel.org/r/20210816075449.2236547-1-kyletso@google.com ? > >Which of these two should I take, both? Neither? Don't take this, it's against spec. Thanks, Icenowy > >confused, > >greg k-h
On Wed, Aug 18, 2021 at 10:02:24PM +0800, Icenowy Zheng wrote: > > > 于 2021年8月18日 GMT+08:00 下午9:56:38, Greg Kroah-Hartman <gregkh@linuxfoundation.org> 写到: > >On Tue, Aug 17, 2021 at 02:00:33PM +0300, Heikki Krogerus wrote: > >> > >Why is it necessary to do discovery with data role swap in general? > >> > > >> > I think it could be possible for devices to expose different altmode > >> > with different role. > >> > >> OK. FWIW: > >> > >> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > > > >Is this conflicting with https://lore.kernel.org/r/20210816075449.2236547-1-kyletso@google.com ? > > > >Which of these two should I take, both? Neither? > > Don't take this, it's against spec. Ok, now dropped. What about the linked patch above? Does that work for you instead? thanks, greg k-h
On Wed, Aug 18, 2021 at 10:40 PM Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote: > > On Wed, Aug 18, 2021 at 10:02:24PM +0800, Icenowy Zheng wrote: > > > > > > 于 2021年8月18日 GMT+08:00 下午9:56:38, Greg Kroah-Hartman <gregkh@linuxfoundation.org> 写到: > > >On Tue, Aug 17, 2021 at 02:00:33PM +0300, Heikki Krogerus wrote: > > >> > >Why is it necessary to do discovery with data role swap in general? > > >> > > > >> > I think it could be possible for devices to expose different altmode > > >> > with different role. > > >> > > >> OK. FWIW: > > >> > > >> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > > > > > >Is this conflicting with https://lore.kernel.org/r/20210816075449.2236547-1-kyletso@google.com ? > > > > > >Which of these two should I take, both? Neither? > > > > Don't take this, it's against spec. > > Ok, now dropped. What about the linked patch above? Does that work for > you instead? > > thanks, > > greg k-h Hi Icenowy, Could you revisit the patch for the tcpm_unregister_altmodes part? I think that is still a problem. thanks, Kyle
在 2021-08-19星期四的 00:13 +0800，Kyle Tso写道： > On Wed, Aug 18, 2021 at 10:40 PM Greg Kroah-Hartman > <gregkh@linuxfoundation.org> wrote: > > > > On Wed, Aug 18, 2021 at 10:02:24PM +0800, Icenowy Zheng wrote: > > > > > > > > > 于 2021年8月18日 GMT+08:00 下午9:56:38, Greg Kroah-Hartman < > > > gregkh@linuxfoundation.org> 写到: > > > > On Tue, Aug 17, 2021 at 02:00:33PM +0300, Heikki Krogerus > > > > wrote: > > > > > > > Why is it necessary to do discovery with data role swap > > > > > > > in general? > > > > > > > > > > > > I think it could be possible for devices to expose > > > > > > different altmode > > > > > > with different role. > > > > > > > > > > OK. FWIW: > > > > > > > > > > Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > > > > > > > > Is this conflicting with > > > > https://lore.kernel.org/r/20210816075449.2236547-1-kyletso@google.com > > > > ? > > > > > > > > Which of these two should I take, both? Neither? > > > > > > Don't take this, it's against spec. > > > > Ok, now dropped. What about the linked patch above? Does that > > work for > > you instead? > > > > thanks, > > > > greg k-h > > Hi Icenowy, > > Could you revisit the patch for the tcpm_unregister_altmodes part? > I think that is still a problem. Well I think it's okay, but I know none about PD3, and I have no PD3 device either. So I prefer to continue on fix on dropping the discover sent on snk_attach instead of working on this, because I know nothing about this, and in my limited knowledge the code looks fine here. > > thanks, > Kyle
在 2021-08-19星期四的 00:13 +0800，Kyle Tso写道： > On Wed, Aug 18, 2021 at 10:40 PM Greg Kroah-Hartman > <gregkh@linuxfoundation.org> wrote: > > > > On Wed, Aug 18, 2021 at 10:02:24PM +0800, Icenowy Zheng wrote: > > > > > > > > > 于 2021年8月18日 GMT+08:00 下午9:56:38, Greg Kroah-Hartman < > > > gregkh@linuxfoundation.org> 写到: > > > > On Tue, Aug 17, 2021 at 02:00:33PM +0300, Heikki Krogerus > > > > wrote: > > > > > > > Why is it necessary to do discovery with data role swap > > > > > > > in general? > > > > > > > > > > > > I think it could be possible for devices to expose > > > > > > different altmode > > > > > > with different role. > > > > > > > > > > OK. FWIW: > > > > > > > > > > Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > > > > > > > > Is this conflicting with > > > > https://lore.kernel.org/r/20210816075449.2236547-1-kyletso@google.com > > > > ? > > > > > > > > Which of these two should I take, both? Neither? > > > > > > Don't take this, it's against spec. > > > > Ok, now dropped. What about the linked patch above? Does that > > work for > > you instead? > > > > thanks, > > > > greg k-h > > Hi Icenowy, > > Could you revisit the patch for the tcpm_unregister_altmodes part? > I think that is still a problem. Well, I must admit that only doing a tcpm_unregister_altmodes() should be harmless. > > thanks, > Kyle
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index b9bb63d749ec..ab6d0d51ee1c 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -4495,15 +4495,14 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_state(port, ready_state(port), 0); break; case DR_SWAP_CHANGE_DR: - if (port->data_role == TYPEC_HOST) { - tcpm_unregister_altmodes(port); + tcpm_unregister_altmodes(port); + if (port->data_role == TYPEC_HOST) tcpm_set_roles(port, true, port->pwr_role, TYPEC_DEVICE); - } else { + else tcpm_set_roles(port, true, port->pwr_role, TYPEC_HOST); - port->send_discover = true; - } + port->send_discover = true; tcpm_ams_finish(port); tcpm_set_state(port, ready_state(port), 0); break;
Currently, TCPM code omits discover when swapping to gadget, and assume that no altmodes are available when swapping from gadget. However, we do send discover when we get attached as gadget -- this leads to modes to be discovered twice when attached as gadget and then swap to host. Always re-send discover when swapping DR, regardless of what change is being made; and because of this, the assumption that no altmodes are registered with gadget role is broken, and altmodes de-registeration is always needed now. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> --- drivers/usb/typec/tcpm/tcpm.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)