| Message ID | 20210824041922.30586-1-macroalpha82@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RFC] dt-bindings: mfd: rk808: Convert bindings to yaml | expand |
On Mon, Aug 23, 2021 at 11:19:22PM -0500, Chris Morgan wrote: > From: Chris Morgan <macromorgan@hotmail.com> > > This is an RFC to convert the rk808 bindings into yaml format. Please > note that currently there are a few errors that appear when performing > a make dtbs_check. However, after looking at the errors it appears > in most cases it occurs on device trees which are not following > the current rk808.txt document today. For example for the rk808 > there are multiple errors regarding vcc13-supply, vcc14-supply, and > vddio-supply; however these supplies are not listed in the current > driver or cared for in any way. > > Signed-off-by: Chris Morgan <macromorgan@hotmail.com> > --- > .../devicetree/bindings/mfd/rk808.txt | 503 ------------------ > .../bindings/mfd/rockchip,rk805.yaml | 89 ++++ > .../bindings/mfd/rockchip,rk808.yaml | 255 +++++++++ > .../bindings/mfd/rockchip,rk809.yaml | 101 ++++ > .../bindings/mfd/rockchip,rk817.yaml | 365 +++++++++++++ > .../bindings/mfd/rockchip,rk818.yaml | 109 ++++ > 6 files changed, 919 insertions(+), 503 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/mfd/rk808.txt > create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml > create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml > create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml > create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml > create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml Most of the comments below apply to all the files... > diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml > new file mode 100644 > index 000000000000..347696f1709c > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml > @@ -0,0 +1,89 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/rockchip,rk805.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: RK808 Power Management Integrated Circuit > + > +maintainers: > + - Chris Zhong <zyw@rock-chips.com> > + - Zhang Qing <zhangqing@rock-chips.com> > + > +description: | > + Rockchip RK805 series PMIC. This device consists of an i2c controlled MFD > + that includes multiple switchable regulators. > + > +properties: > + compatible: > + enum: > + - rockchip,rk805 > + > + reg: > + maxItems: 1 > + description: > + The I2C slave address. Don't need generic descriptions. Drop > + > + interrupts: > + maxItems: 1 > + description: > + The interrupt output of the controller. Drop. > + > + '#clock-cells': > + description: | > + From common clock binding; shall be set to 1 (multiple clock outputs). Drop. > + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. > + const: 1 > + > + clock-output-names: > + description: > + From common clock binding to override the default output clock name. maxItems: ? (and minItems if it is a range, but I think this is all clocks or none) > + > + rockchip,system-power-controller: > + type: boolean > + description: > + Telling whether or not this PMIC is controlling the system power. > + > + wakeup-source: > + type: boolean > + description: > + Device can be used as a wakeup source. > + > + vcc1-supply: > + description: > + The input supply for DCDC_REG1. > + > + vcc2-supply: > + description: > + The input supply for DCDC_REG2. > + > + vcc3-supply: > + description: > + The input supply for DCDC_REG3. > + > + vcc4-supply: > + description: > + The input supply for DCDC_REG4. > + > + vcc5-supply: > + description: > + The input supply for LDO_REG1 and LDO_REG2. > + > + vcc6-supply: > + description: > + The input supply for LDO_REG3. > + > + regulators: > + type: object > + patternProperties: > + "^(DCDC_REG[1-4]|LDO_REG[1-3])$": > + type: object > + $ref: ../regulator/regulator.yaml# unevaluatedProperties: false > + > +required: > + - compatible > + - reg > + - interrupts > + - "#clock-cells" > + > +additionalProperties: false > diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml > new file mode 100644 > index 000000000000..6bec1d9e4640 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml > @@ -0,0 +1,255 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/rockchip,rk808.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: RK808 Power Management Integrated Circuit > + > +maintainers: > + - Chris Zhong <zyw@rock-chips.com> > + - Zhang Qing <zhangqing@rock-chips.com> > + > +description: | > + Rockchip RK808 series PMIC. This device consists of an i2c controlled MFD > + that includes regulators, an RTC, and a power button. > + > +properties: > + compatible: > + enum: > + - rockchip,rk808 > + > + reg: > + maxItems: 1 > + description: > + The I2C slave address. > + > + interrupts: > + maxItems: 1 > + description: > + The interrupt output of the controller. > + > + '#clock-cells': > + description: | > + From common clock binding; shall be set to 1 (multiple clock outputs). > + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. > + const: 1 > + > + clock-output-names: > + description: > + From common clock binding to override the default output clock name. > + > + rockchip,system-power-controller: > + type: boolean > + description: > + Telling whether or not this PMIC is controlling the system power. > + > + wakeup-source: > + type: boolean > + description: > + Device can be used as a wakeup source. > + > + vcc1-supply: > + description: > + The input supply for DCDC_REG1. > + > + vcc2-supply: > + description: > + The input supply for DCDC_REG2. > + > + vcc3-supply: > + description: > + The input supply for DCDC_REG3. > + > + vcc4-supply: > + description: > + The input supply for DCDC_REG4. > + > + vcc6-supply: > + description: > + The input supply for LDO_REG1 and LDO_REG2. > + > + vcc7-supply: > + description: > + The input supply for LDO_REG3 and LDO_REG7. > + > + vcc8-supply: > + description: > + The input supply for SWITCH_REG1. > + > + vcc9-supply: > + description: > + The input supply for LDO_REG4 and LDO_REG5. > + > + vcc10-supply: > + description: > + The input supply for LDO_REG6. > + > + vcc11-supply: > + description: > + The input supply for LDO_REG8. > + > + vcc12-supply: > + description: > + The input supply for SWITCH_REG2. > + > + dvs-gpios: > + description: | > + buck1/2 can be controlled by gpio dvs, this is GPIO specifiers for > + 2 host gpio's used for dvs. The format of the gpio specifier > + depends in the gpio controller. If DVS GPIOs aren't present, > + voltage changes will happen very quickly with no slow ramp time. maxItems: 2 > + > + regulators: > + type: object > + patternProperties: > + "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$": > + type: object > + $ref: ../regulator/regulator.yaml# > + > +required: > + - compatible > + - reg > + - interrupts > + - "#clock-cells" > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/pinctrl/rockchip.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/gpio/gpio.h> > + i2c0 { i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + rk808: pmic@1b { > + compatible = "rockchip,rk808"; > + clock-output-names = "xin32k", "rk808-clkout2"; > + interrupt-parent = <&gpio0>; > + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>; > + dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, > + <&gpio7 15 GPIO_ACTIVE_HIGH>; > + reg = <0x1b>; > + rockchip,system-power-controller; > + wakeup-source; > + #clock-cells = <1>; > + > + vcc8-supply = <&vcc_18>; > + vcc9-supply = <&vcc_io>; > + vcc10-supply = <&vcc_io>; > + vcc12-supply = <&vcc_io>; > + vddio-supply = <&vccio_pmu>; > + > + regulators { > + vdd_cpu: DCDC_REG1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1300000>; > + regulator-name = "vdd_arm"; > + }; > + > + vdd_gpu: DCDC_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <1250000>; > + regulator-name = "vdd_gpu"; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc_ddr"; > + }; > + > + vcc_io: DCDC_REG4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc_io"; > + }; > + > + vccio_pmu: LDO_REG1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vccio_pmu"; > + }; > + > + vcc_tp: LDO_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc_tp"; > + }; > + > + vdd_10: LDO_REG3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-name = "vdd_10"; > + }; > + > + vcc18_lcd: LDO_REG4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc18_lcd"; > + }; > + > + vccio_sd: LDO_REG5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vccio_sd"; > + }; > + > + vdd10_lcd: LDO_REG6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-name = "vdd10_lcd"; > + }; > + > + vcc_18: LDO_REG7 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc_18"; > + }; > + > + vcca_codec: LDO_REG8 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcca_codec"; > + }; > + > + vcc_wl: SWITCH_REG1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc_wl"; > + }; > + > + vcc_lcd: SWITCH_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc_lcd"; > + }; > + }; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml > new file mode 100644 > index 000000000000..6d509e863da3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml > @@ -0,0 +1,101 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: RK817 Power Management Integrated Circuit > + > +maintainers: > + - Chris Zhong <zyw@rock-chips.com> > + - Zhang Qing <zhangqing@rock-chips.com> > + > +description: | > + Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD > + that includes regulators, an RTC, and power button. > + > +properties: > + compatible: > + enum: > + - rockchip,rk809 > + > + reg: > + maxItems: 1 > + description: > + The I2C slave address. > + > + interrupts: > + maxItems: 1 > + description: > + The interrupt output of the controller. > + > + '#clock-cells': > + description: | > + From common clock binding; shall be set to 1 (multiple clock outputs). > + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. > + const: 1 > + > + clock-output-names: > + description: > + From common clock binding to override the default output clock name. > + > + rockchip,system-power-controller: > + type: boolean > + description: > + Telling whether or not this PMIC is controlling the system power. > + > + wakeup-source: > + type: boolean > + description: > + Device can be used as a wakeup source. > + > + vcc1-supply: > + description: > + The input supply for DCDC_REG1. > + > + vcc2-supply: > + description: > + The input supply for DCDC_REG2. > + > + vcc3-supply: > + description: > + The input supply for DCDC_REG3. > + > + vcc4-supply: > + description: > + The input supply for DCDC_REG4. > + > + vcc5-supply: > + description: > + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. > + > + vcc6-supply: > + description: > + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. > + > + vcc7-supply: > + description: > + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. > + > + vcc8-supply: > + description: > + The input supply for SWITCH_REG1. > + > + vcc9-supply: > + description: > + The input supply for DCDC_REG5 and SWITCH_REG2. > + > + regulators: > + type: object > + patternProperties: > + "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$": > + type: object > + $ref: ../regulator/regulator.yaml# > + > +required: > + - compatible > + - reg > + - interrupts > + - "#clock-cells" > + > +additionalProperties: false > diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml > new file mode 100644 > index 000000000000..cbe6c2a9f254 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml > @@ -0,0 +1,365 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: RK817 Power Management Integrated Circuit > + > +maintainers: > + - Chris Zhong <zyw@rock-chips.com> > + - Zhang Qing <zhangqing@rock-chips.com> > + > +description: | > + Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD > + that includes regulators, an RTC, a power button, an audio codec, and a > + battery charger manager. > + > +properties: > + compatible: > + enum: > + - rockchip,rk817 > + > + reg: > + maxItems: 1 > + description: > + The I2C slave address. > + > + interrupts: > + maxItems: 1 > + description: > + The interrupt output of the controller. > + > + '#clock-cells': > + description: | > + From common clock binding; shall be set to 1 (multiple clock outputs). > + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. > + const: 1 > + > + clock-output-names: > + description: > + From common clock binding to override the default output clock name. > + > + rockchip,system-power-controller: > + type: boolean > + description: > + Telling whether or not this PMIC is controlling the system power. > + > + wakeup-source: > + type: boolean > + description: > + Device can be used as a wakeup source. > + > + vcc1-supply: > + description: > + The input supply for DCDC_REG1. > + > + vcc2-supply: > + description: > + The input supply for DCDC_REG2. > + > + vcc3-supply: > + description: > + The input supply for DCDC_REG3. > + > + vcc4-supply: > + description: > + The input supply for DCDC_REG4. > + > + vcc5-supply: > + description: > + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. > + > + vcc6-supply: > + description: > + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. > + > + vcc7-supply: > + description: > + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. > + > + vcc8-supply: > + description: > + The input supply for BOOST. > + > + vcc9-supply: > + description: > + The input supply for OTG_SWITCH. > + > + regulators: > + type: object > + patternProperties: > + "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$": > + type: object > + $ref: ../regulator/regulator.yaml# > + > + clocks: > + description: > + The input clock for the audio codec. > + > + clock-names: > + description: > + The clock name for the codec clock. > + items: > + - const: mclk > + > + '#sound-dai-cells': > + description: > + Needed for the interpretation of sound dais. > + const: 0 > + > + codec: > + description: | > + The child node for the codec to hold additional properties. If no > + additional properties are required for the codec, this node can be > + omitted. > + type: object > + properties: > + rockchip,mic-in-differential: > + type: boolean > + description: > + Describes if the microphone uses differential mode. > + > + battery: Is this the only PMIC with the battery monitoring? If not and the node is the same on others (or will be), you should make this a separate schema file and reference it. > + description: | > + The child node for the charger to hold additional properties. If a > + battery is not in use, this node can be omitted. > + type: object > + properties: > + monitored-battery: > + description: | > + A phandle to a monitored battery node that contains a valid > + value for: > + charge-full-design-microamp-hours, > + charge-term-current-microamp, > + constant-charge-current-max-microamp, > + constant-charge-voltage-max-microvolt, > + voltage-max-design-microvolt, > + voltage-min-design-microvolt, > + and a valid ocv-capacity table. > + > + rockchip,resistor-sense-micro-ohms: > + description: | > + Value in microohms of the battery sense resistor. This value is > + used by the driver to set the correct divisor value to translate > + ADC readings into the proper units of measure. > + enum: [10000, 20000] > + > + rockchip,sleep-enter-current-microamp: > + description: | > + Value in microamps of the sleep enter current for the charger. > + Value is used by the driver to calibrate the relax threshold. > + > + rockchip,sleep-filter-current-microamp: > + description: > + Value in microamps of the sleep filter current for the charger. > + Value is used by the driver to derive the sleep sample current. > + > + required: > + - monitored-battery > + - rockchip,resistor-sense-micro-ohms > + - rockchip,sleep-enter-current-microamp > + - rockchip,sleep-filter-current-microamp > + > +required: > + - compatible > + - reg > + - interrupts > + - "#clock-cells" > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/px30-cru.h> > + #include <dt-bindings/pinctrl/rockchip.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/gpio/gpio.h> > + i2c0 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + rk817: pmic@20 { > + compatible = "rockchip,rk817"; > + reg = <0x20>; > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; > + clock-output-names = "rk808-clkout1", "xin32k"; > + clock-names = "mclk"; > + clocks = <&cru SCLK_I2S1_OUT>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; > + wakeup-source; > + #clock-cells = <1>; > + #sound-dai-cells = <0>; > + > + vcc1-supply = <&vccsys>; > + vcc2-supply = <&vccsys>; > + vcc3-supply = <&vccsys>; > + vcc4-supply = <&vccsys>; > + vcc5-supply = <&vccsys>; > + vcc6-supply = <&vccsys>; > + vcc7-supply = <&vccsys>; > + > + regulators { > + vdd_logic: DCDC_REG1 { > + regulator-name = "vdd_logic"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1150000>; > + regulator-ramp-delay = <6001>; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <950000>; > + }; > + }; > + > + vdd_arm: DCDC_REG2 { > + regulator-name = "vdd_arm"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <950000>; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-name = "vcc_ddr"; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_3v3: DCDC_REG4 { > + regulator-name = "vcc_3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vcc_1v8: LDO_REG2 { > + regulator-name = "vcc_1v8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vdd_1v0: LDO_REG3 { > + regulator-name = "vdd_1v0"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1000000>; > + }; > + }; > + > + vcc3v3_pmu: LDO_REG4 { > + regulator-name = "vcc3v3_pmu"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vccio_sd: LDO_REG5 { > + regulator-name = "vccio_sd"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vcc_sd: LDO_REG6 { > + regulator-name = "vcc_sd"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vcc_bl: LDO_REG7 { > + regulator-name = "vcc_bl"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vcc_lcd: LDO_REG8 { > + regulator-name = "vcc_lcd"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <2800000>; > + }; > + }; > + > + vcc_cam: LDO_REG9 { > + regulator-name = "vcc_cam"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + }; > + > + rk817_battery: battery { > + monitored-battery = <&battery_cell>; > + rockchip,resistor-sense-micro-ohms = <10000>; > + rockchip,sleep-enter-current-microamp = <300000>; > + rockchip,sleep-filter-current-microamp = <100000>; > + }; > + > + rk817_codec: codec { > + rockchip,mic-in-differential; > + }; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml > new file mode 100644 > index 000000000000..8440353e5dbf > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml > @@ -0,0 +1,109 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/rockchip,rk818.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: RK818 Power Management Integrated Circuit > + > +maintainers: > + - Chris Zhong <zyw@rock-chips.com> > + - Zhang Qing <zhangqing@rock-chips.com> > + > +description: | > + Rockchip RK818 series PMIC. This device consists of an i2c controlled MFD > + that includes regulators, an RTC, and a power button. > + > +properties: > + compatible: > + enum: > + - rockchip,rk818 > + > + reg: > + maxItems: 1 > + description: > + The I2C slave address. > + > + interrupts: > + maxItems: 1 > + description: > + The interrupt output of the controller. > + > + '#clock-cells': > + description: | > + From common clock binding; shall be set to 1 (multiple clock outputs). > + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. > + const: 1 > + > + clock-output-names: > + description: > + From common clock binding to override the default output clock name. > + > + rockchip,system-power-controller: > + type: boolean > + description: > + Telling whether or not this PMIC is controlling the system power. > + > + wakeup-source: > + type: boolean > + description: > + Device can be used as a wakeup source. > + > + vcc1-supply: > + description: > + The input supply for DCDC_REG1. > + > + vcc2-supply: > + description: > + The input supply for DCDC_REG2. > + > + vcc3-supply: > + description: > + The input supply for DCDC_REG3. > + > + vcc4-supply: > + description: > + The input supply for DCDC_REG4. > + > + boost-supply: > + description: > + The input supply for DCDC_BOOST > + > + vcc6-supply: > + description: > + The input supply for LDO_REG1 and LDO_REG2. > + > + vcc7-supply: > + description: > + The input supply for LDO_REG3, LDO_REG5, and LDO_REG7. > + > + vcc8-supply: > + description: > + The input supply for LDO_REG4, LDO_REG6, and LDO_REG8. > + > + vcc9-supply: > + description: > + The input supply for LDO_REG9 and SWITCH_REG. > + > + h_5v-supply: > + description: > + The input supply for HDMI_SWITCH. > + > + usb-supply: > + description: > + The input supply for OTG_SWITCH. > + > + regulators: > + type: object > + patternProperties: > + "^(DCDC_REG[1-4]|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$": > + type: object > + $ref: ../regulator/regulator.yaml# > + > +required: > + - compatible > + - reg > + - interrupts > + - "#clock-cells" > + > +additionalProperties: false > -- > 2.25.1 > >
On Tue, Aug 24, 2021 at 08:14:02AM -0500, Rob Herring wrote: > On Mon, Aug 23, 2021 at 11:19:22PM -0500, Chris Morgan wrote: > > From: Chris Morgan <macromorgan@hotmail.com> > > > > This is an RFC to convert the rk808 bindings into yaml format. Please > > note that currently there are a few errors that appear when performing > > a make dtbs_check. However, after looking at the errors it appears > > in most cases it occurs on device trees which are not following > > the current rk808.txt document today. For example for the rk808 > > there are multiple errors regarding vcc13-supply, vcc14-supply, and > > vddio-supply; however these supplies are not listed in the current > > driver or cared for in any way. > > > > Signed-off-by: Chris Morgan <macromorgan@hotmail.com> > > --- > > .../devicetree/bindings/mfd/rk808.txt | 503 ------------------ > > .../bindings/mfd/rockchip,rk805.yaml | 89 ++++ > > .../bindings/mfd/rockchip,rk808.yaml | 255 +++++++++ > > .../bindings/mfd/rockchip,rk809.yaml | 101 ++++ > > .../bindings/mfd/rockchip,rk817.yaml | 365 +++++++++++++ > > .../bindings/mfd/rockchip,rk818.yaml | 109 ++++ > > 6 files changed, 919 insertions(+), 503 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/mfd/rk808.txt > > create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml > > create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml > > create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml > > create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml > > create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml > > Most of the comments below apply to all the files... Thank you. > > > > diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml > > new file mode 100644 > > index 000000000000..347696f1709c > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml > > @@ -0,0 +1,89 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fmfd%2Frockchip%2Crk805.yaml%23&data=04%7C01%7C%7Ca95e75ae88ca4019815908d967010cc1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637654076499648320%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=%2FqYx3UM1fLwNcF85bvlyllhpneahnLE0wR5NVk6%2Bgsc%3D&reserved=0 > > +$schema: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=04%7C01%7C%7Ca95e75ae88ca4019815908d967010cc1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637654076499658316%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=6kHpWnVUBpuw1ujpF845IbvWsSUnP7uf%2FCKoaDqXBAw%3D&reserved=0 > > + > > +title: RK808 Power Management Integrated Circuit > > + > > +maintainers: > > + - Chris Zhong <zyw@rock-chips.com> > > + - Zhang Qing <zhangqing@rock-chips.com> > > + > > +description: | > > + Rockchip RK805 series PMIC. This device consists of an i2c controlled MFD > > + that includes multiple switchable regulators. > > + > > +properties: > > + compatible: > > + enum: > > + - rockchip,rk805 > > + > > + reg: > > + maxItems: 1 > > + description: > > + The I2C slave address. > > Don't need generic descriptions. Drop Acknowledged. > > > + > > + interrupts: > > + maxItems: 1 > > + description: > > + The interrupt output of the controller. > > Drop. > Ack. > > + > > + '#clock-cells': > > + description: | > > + From common clock binding; shall be set to 1 (multiple clock outputs). > > Drop. > Ack. > > + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. > > + const: 1 > > + > > + clock-output-names: > > + description: > > + From common clock binding to override the default output clock name. > > maxItems: ? > > (and minItems if it is a range, but I think this is all clocks or none) > I think it's just a maxItems of 2 if I'm not mistaken. I'll make the change. > > + > > + rockchip,system-power-controller: > > + type: boolean > > + description: > > + Telling whether or not this PMIC is controlling the system power. > > + > > + wakeup-source: > > + type: boolean > > + description: > > + Device can be used as a wakeup source. > > + > > + vcc1-supply: > > + description: > > + The input supply for DCDC_REG1. > > + > > + vcc2-supply: > > + description: > > + The input supply for DCDC_REG2. > > + > > + vcc3-supply: > > + description: > > + The input supply for DCDC_REG3. > > + > > + vcc4-supply: > > + description: > > + The input supply for DCDC_REG4. > > + > > + vcc5-supply: > > + description: > > + The input supply for LDO_REG1 and LDO_REG2. > > + > > + vcc6-supply: > > + description: > > + The input supply for LDO_REG3. > > + > > + regulators: > > + type: object > > + patternProperties: > > + "^(DCDC_REG[1-4]|LDO_REG[1-3])$": > > + type: object > > + $ref: ../regulator/regulator.yaml# > > unevaluatedProperties: false Ack. > > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - "#clock-cells" > > + > > +additionalProperties: false > > diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml > > new file mode 100644 > > index 000000000000..6bec1d9e4640 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml > > @@ -0,0 +1,255 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fmfd%2Frockchip%2Crk808.yaml%23&data=04%7C01%7C%7Ca95e75ae88ca4019815908d967010cc1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637654076499658316%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=Dgq2GasTMbD3EKqa5dr5h%2Bg6gRKtyTGNQ45nWWr8Cpw%3D&reserved=0 > > +$schema: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=04%7C01%7C%7Ca95e75ae88ca4019815908d967010cc1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637654076499658316%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=6kHpWnVUBpuw1ujpF845IbvWsSUnP7uf%2FCKoaDqXBAw%3D&reserved=0 > > + > > +title: RK808 Power Management Integrated Circuit > > + > > +maintainers: > > + - Chris Zhong <zyw@rock-chips.com> > > + - Zhang Qing <zhangqing@rock-chips.com> > > + > > +description: | > > + Rockchip RK808 series PMIC. This device consists of an i2c controlled MFD > > + that includes regulators, an RTC, and a power button. > > + > > +properties: > > + compatible: > > + enum: > > + - rockchip,rk808 > > + > > + reg: > > + maxItems: 1 > > + description: > > + The I2C slave address. > > + > > + interrupts: > > + maxItems: 1 > > + description: > > + The interrupt output of the controller. > > + > > + '#clock-cells': > > + description: | > > + From common clock binding; shall be set to 1 (multiple clock outputs). > > + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. > > + const: 1 > > + > > + clock-output-names: > > + description: > > + From common clock binding to override the default output clock name. > > + > > + rockchip,system-power-controller: > > + type: boolean > > + description: > > + Telling whether or not this PMIC is controlling the system power. > > + > > + wakeup-source: > > + type: boolean > > + description: > > + Device can be used as a wakeup source. > > + > > + vcc1-supply: > > + description: > > + The input supply for DCDC_REG1. > > + > > + vcc2-supply: > > + description: > > + The input supply for DCDC_REG2. > > + > > + vcc3-supply: > > + description: > > + The input supply for DCDC_REG3. > > + > > + vcc4-supply: > > + description: > > + The input supply for DCDC_REG4. > > + > > + vcc6-supply: > > + description: > > + The input supply for LDO_REG1 and LDO_REG2. > > + > > + vcc7-supply: > > + description: > > + The input supply for LDO_REG3 and LDO_REG7. > > + > > + vcc8-supply: > > + description: > > + The input supply for SWITCH_REG1. > > + > > + vcc9-supply: > > + description: > > + The input supply for LDO_REG4 and LDO_REG5. > > + > > + vcc10-supply: > > + description: > > + The input supply for LDO_REG6. > > + > > + vcc11-supply: > > + description: > > + The input supply for LDO_REG8. > > + > > + vcc12-supply: > > + description: > > + The input supply for SWITCH_REG2. > > + > > + dvs-gpios: > > + description: | > > + buck1/2 can be controlled by gpio dvs, this is GPIO specifiers for > > + 2 host gpio's used for dvs. The format of the gpio specifier > > + depends in the gpio controller. If DVS GPIOs aren't present, > > + voltage changes will happen very quickly with no slow ramp time. > > maxItems: 2 > Ack. > > + > > + regulators: > > + type: object > > + patternProperties: > > + "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$": > > + type: object > > + $ref: ../regulator/regulator.yaml# > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - "#clock-cells" > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/pinctrl/rockchip.h> > > + #include <dt-bindings/interrupt-controller/irq.h> > > + #include <dt-bindings/gpio/gpio.h> > > + i2c0 { > > i2c { > Ack. > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + rk808: pmic@1b { > > + compatible = "rockchip,rk808"; > > + clock-output-names = "xin32k", "rk808-clkout2"; > > + interrupt-parent = <&gpio0>; > > + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>; > > + dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, > > + <&gpio7 15 GPIO_ACTIVE_HIGH>; > > + reg = <0x1b>; > > + rockchip,system-power-controller; > > + wakeup-source; > > + #clock-cells = <1>; > > + > > + vcc8-supply = <&vcc_18>; > > + vcc9-supply = <&vcc_io>; > > + vcc10-supply = <&vcc_io>; > > + vcc12-supply = <&vcc_io>; > > + vddio-supply = <&vccio_pmu>; > > + > > + regulators { > > + vdd_cpu: DCDC_REG1 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <750000>; > > + regulator-max-microvolt = <1300000>; > > + regulator-name = "vdd_arm"; > > + }; > > + > > + vdd_gpu: DCDC_REG2 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <850000>; > > + regulator-max-microvolt = <1250000>; > > + regulator-name = "vdd_gpu"; > > + }; > > + > > + vcc_ddr: DCDC_REG3 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-name = "vcc_ddr"; > > + }; > > + > > + vcc_io: DCDC_REG4 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-name = "vcc_io"; > > + }; > > + > > + vccio_pmu: LDO_REG1 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-name = "vccio_pmu"; > > + }; > > + > > + vcc_tp: LDO_REG2 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-name = "vcc_tp"; > > + }; > > + > > + vdd_10: LDO_REG3 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1000000>; > > + regulator-max-microvolt = <1000000>; > > + regulator-name = "vdd_10"; > > + }; > > + > > + vcc18_lcd: LDO_REG4 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-name = "vcc18_lcd"; > > + }; > > + > > + vccio_sd: LDO_REG5 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-name = "vccio_sd"; > > + }; > > + > > + vdd10_lcd: LDO_REG6 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1000000>; > > + regulator-max-microvolt = <1000000>; > > + regulator-name = "vdd10_lcd"; > > + }; > > + > > + vcc_18: LDO_REG7 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-name = "vcc_18"; > > + }; > > + > > + vcca_codec: LDO_REG8 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-name = "vcca_codec"; > > + }; > > + > > + vcc_wl: SWITCH_REG1 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-name = "vcc_wl"; > > + }; > > + > > + vcc_lcd: SWITCH_REG2 { > > + regulator-always-on; > > + regulator-boot-on; > > + regulator-name = "vcc_lcd"; > > + }; > > + }; > > + }; > > + }; > > diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml > > new file mode 100644 > > index 000000000000..6d509e863da3 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml > > @@ -0,0 +1,101 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fmfd%2Frockchip%2Crk809.yaml%23&data=04%7C01%7C%7Ca95e75ae88ca4019815908d967010cc1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637654076499658316%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=V9xfkGcP1itXzALdg9mqt9ijiTJbhVPMr7VQ2LVKYmM%3D&reserved=0 > > +$schema: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=04%7C01%7C%7Ca95e75ae88ca4019815908d967010cc1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637654076499658316%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=6kHpWnVUBpuw1ujpF845IbvWsSUnP7uf%2FCKoaDqXBAw%3D&reserved=0 > > + > > +title: RK817 Power Management Integrated Circuit > > + > > +maintainers: > > + - Chris Zhong <zyw@rock-chips.com> > > + - Zhang Qing <zhangqing@rock-chips.com> > > + > > +description: | > > + Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD > > + that includes regulators, an RTC, and power button. > > + > > +properties: > > + compatible: > > + enum: > > + - rockchip,rk809 > > + > > + reg: > > + maxItems: 1 > > + description: > > + The I2C slave address. > > + > > + interrupts: > > + maxItems: 1 > > + description: > > + The interrupt output of the controller. > > + > > + '#clock-cells': > > + description: | > > + From common clock binding; shall be set to 1 (multiple clock outputs). > > + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. > > + const: 1 > > + > > + clock-output-names: > > + description: > > + From common clock binding to override the default output clock name. > > + > > + rockchip,system-power-controller: > > + type: boolean > > + description: > > + Telling whether or not this PMIC is controlling the system power. > > + > > + wakeup-source: > > + type: boolean > > + description: > > + Device can be used as a wakeup source. > > + > > + vcc1-supply: > > + description: > > + The input supply for DCDC_REG1. > > + > > + vcc2-supply: > > + description: > > + The input supply for DCDC_REG2. > > + > > + vcc3-supply: > > + description: > > + The input supply for DCDC_REG3. > > + > > + vcc4-supply: > > + description: > > + The input supply for DCDC_REG4. > > + > > + vcc5-supply: > > + description: > > + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. > > + > > + vcc6-supply: > > + description: > > + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. > > + > > + vcc7-supply: > > + description: > > + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. > > + > > + vcc8-supply: > > + description: > > + The input supply for SWITCH_REG1. > > + > > + vcc9-supply: > > + description: > > + The input supply for DCDC_REG5 and SWITCH_REG2. > > + > > + regulators: > > + type: object > > + patternProperties: > > + "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$": > > + type: object > > + $ref: ../regulator/regulator.yaml# > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - "#clock-cells" > > + > > +additionalProperties: false > > diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml > > new file mode 100644 > > index 000000000000..cbe6c2a9f254 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml > > @@ -0,0 +1,365 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fmfd%2Frockchip%2Crk817.yaml%23&data=04%7C01%7C%7Ca95e75ae88ca4019815908d967010cc1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637654076499658316%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=q9%2Bq8%2ByU%2BQ2eIvopKuJu%2BpptYyWRBIZiQWlvwRaAiv0%3D&reserved=0 > > +$schema: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=04%7C01%7C%7Ca95e75ae88ca4019815908d967010cc1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637654076499658316%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=6kHpWnVUBpuw1ujpF845IbvWsSUnP7uf%2FCKoaDqXBAw%3D&reserved=0 > > + > > +title: RK817 Power Management Integrated Circuit > > + > > +maintainers: > > + - Chris Zhong <zyw@rock-chips.com> > > + - Zhang Qing <zhangqing@rock-chips.com> > > + > > +description: | > > + Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD > > + that includes regulators, an RTC, a power button, an audio codec, and a > > + battery charger manager. > > + > > +properties: > > + compatible: > > + enum: > > + - rockchip,rk817 > > + > > + reg: > > + maxItems: 1 > > + description: > > + The I2C slave address. > > + > > + interrupts: > > + maxItems: 1 > > + description: > > + The interrupt output of the controller. > > + > > + '#clock-cells': > > + description: | > > + From common clock binding; shall be set to 1 (multiple clock outputs). > > + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. > > + const: 1 > > + > > + clock-output-names: > > + description: > > + From common clock binding to override the default output clock name. > > + > > + rockchip,system-power-controller: > > + type: boolean > > + description: > > + Telling whether or not this PMIC is controlling the system power. > > + > > + wakeup-source: > > + type: boolean > > + description: > > + Device can be used as a wakeup source. > > + > > + vcc1-supply: > > + description: > > + The input supply for DCDC_REG1. > > + > > + vcc2-supply: > > + description: > > + The input supply for DCDC_REG2. > > + > > + vcc3-supply: > > + description: > > + The input supply for DCDC_REG3. > > + > > + vcc4-supply: > > + description: > > + The input supply for DCDC_REG4. > > + > > + vcc5-supply: > > + description: > > + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. > > + > > + vcc6-supply: > > + description: > > + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. > > + > > + vcc7-supply: > > + description: > > + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. > > + > > + vcc8-supply: > > + description: > > + The input supply for BOOST. > > + > > + vcc9-supply: > > + description: > > + The input supply for OTG_SWITCH. > > + > > + regulators: > > + type: object > > + patternProperties: > > + "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$": > > + type: object > > + $ref: ../regulator/regulator.yaml# > > + > > + clocks: > > + description: > > + The input clock for the audio codec. > > + > > + clock-names: > > + description: > > + The clock name for the codec clock. > > + items: > > + - const: mclk > > + > > + '#sound-dai-cells': > > + description: > > + Needed for the interpretation of sound dais. > > + const: 0 > > + > > + codec: > > + description: | > > + The child node for the codec to hold additional properties. If no > > + additional properties are required for the codec, this node can be > > + omitted. > > + type: object > > + properties: > > + rockchip,mic-in-differential: > > + type: boolean > > + description: > > + Describes if the microphone uses differential mode. > > + > > + battery: > > Is this the only PMIC with the battery monitoring? If not and the node > is the same on others (or will be), you should make this a separate > schema file and reference it. > I know the rk818 has battery monitoring, but I don't know how it is going to look or if it even uses the same values. Honestly I'm just focused on the rk817 since that's what the only device I am working with has on it. Do you think this should be a seperate binding or can it be combined with the rk817 until we know for sure what the rk818 will look like (and someone ports the rk818 charger)? > > + description: | > > + The child node for the charger to hold additional properties. If a > > + battery is not in use, this node can be omitted. > > + type: object > > + properties: > > + monitored-battery: > > + description: | > > + A phandle to a monitored battery node that contains a valid > > + value for: > > + charge-full-design-microamp-hours, > > + charge-term-current-microamp, > > + constant-charge-current-max-microamp, > > + constant-charge-voltage-max-microvolt, > > + voltage-max-design-microvolt, > > + voltage-min-design-microvolt, > > + and a valid ocv-capacity table. > > + > > + rockchip,resistor-sense-micro-ohms: > > + description: | > > + Value in microohms of the battery sense resistor. This value is > > + used by the driver to set the correct divisor value to translate > > + ADC readings into the proper units of measure. > > + enum: [10000, 20000] > > + > > + rockchip,sleep-enter-current-microamp: > > + description: | > > + Value in microamps of the sleep enter current for the charger. > > + Value is used by the driver to calibrate the relax threshold. > > + > > + rockchip,sleep-filter-current-microamp: > > + description: > > + Value in microamps of the sleep filter current for the charger. > > + Value is used by the driver to derive the sleep sample current. > > + > > + required: > > + - monitored-battery > > + - rockchip,resistor-sense-micro-ohms > > + - rockchip,sleep-enter-current-microamp > > + - rockchip,sleep-filter-current-microamp > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - "#clock-cells" > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/px30-cru.h> > > + #include <dt-bindings/pinctrl/rockchip.h> > > + #include <dt-bindings/interrupt-controller/irq.h> > > + #include <dt-bindings/gpio/gpio.h> > > + i2c0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + rk817: pmic@20 { > > + compatible = "rockchip,rk817"; > > + reg = <0x20>; > > + interrupt-parent = <&gpio0>; > > + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; > > + clock-output-names = "rk808-clkout1", "xin32k"; > > + clock-names = "mclk"; > > + clocks = <&cru SCLK_I2S1_OUT>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; > > + wakeup-source; > > + #clock-cells = <1>; > > + #sound-dai-cells = <0>; > > + > > + vcc1-supply = <&vccsys>; > > + vcc2-supply = <&vccsys>; > > + vcc3-supply = <&vccsys>; > > + vcc4-supply = <&vccsys>; > > + vcc5-supply = <&vccsys>; > > + vcc6-supply = <&vccsys>; > > + vcc7-supply = <&vccsys>; > > + > > + regulators { > > + vdd_logic: DCDC_REG1 { > > + regulator-name = "vdd_logic"; > > + regulator-min-microvolt = <950000>; > > + regulator-max-microvolt = <1150000>; > > + regulator-ramp-delay = <6001>; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = <950000>; > > + }; > > + }; > > + > > + vdd_arm: DCDC_REG2 { > > + regulator-name = "vdd_arm"; > > + regulator-min-microvolt = <950000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <6001>; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + regulator-suspend-microvolt = <950000>; > > + }; > > + }; > > + > > + vcc_ddr: DCDC_REG3 { > > + regulator-name = "vcc_ddr"; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + }; > > + }; > > + > > + vcc_3v3: DCDC_REG4 { > > + regulator-name = "vcc_3v3"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + regulator-suspend-microvolt = <3300000>; > > + }; > > + }; > > + > > + vcc_1v8: LDO_REG2 { > > + regulator-name = "vcc_1v8"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = <1800000>; > > + }; > > + }; > > + > > + vdd_1v0: LDO_REG3 { > > + regulator-name = "vdd_1v0"; > > + regulator-min-microvolt = <1000000>; > > + regulator-max-microvolt = <1000000>; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = <1000000>; > > + }; > > + }; > > + > > + vcc3v3_pmu: LDO_REG4 { > > + regulator-name = "vcc3v3_pmu"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = <3300000>; > > + }; > > + }; > > + > > + vccio_sd: LDO_REG5 { > > + regulator-name = "vccio_sd"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = <3300000>; > > + }; > > + }; > > + > > + vcc_sd: LDO_REG6 { > > + regulator-name = "vcc_sd"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = <3300000>; > > + }; > > + }; > > + > > + vcc_bl: LDO_REG7 { > > + regulator-name = "vcc_bl"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + regulator-suspend-microvolt = <3300000>; > > + }; > > + }; > > + > > + vcc_lcd: LDO_REG8 { > > + regulator-name = "vcc_lcd"; > > + regulator-min-microvolt = <2800000>; > > + regulator-max-microvolt = <2800000>; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + regulator-suspend-microvolt = <2800000>; > > + }; > > + }; > > + > > + vcc_cam: LDO_REG9 { > > + regulator-name = "vcc_cam"; > > + regulator-min-microvolt = <3000000>; > > + regulator-max-microvolt = <3000000>; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + regulator-suspend-microvolt = <3000000>; > > + }; > > + }; > > + }; > > + > > + rk817_battery: battery { > > + monitored-battery = <&battery_cell>; > > + rockchip,resistor-sense-micro-ohms = <10000>; > > + rockchip,sleep-enter-current-microamp = <300000>; > > + rockchip,sleep-filter-current-microamp = <100000>; > > + }; > > + > > + rk817_codec: codec { > > + rockchip,mic-in-differential; > > + }; > > + }; > > + }; > > diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml > > new file mode 100644 > > index 000000000000..8440353e5dbf > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml > > @@ -0,0 +1,109 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fmfd%2Frockchip%2Crk818.yaml%23&data=04%7C01%7C%7Ca95e75ae88ca4019815908d967010cc1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637654076499658316%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=8ZpLcOO0kUKQb0hvByX5F%2BSrHZF6Pi7e3gX%2F34GqE1A%3D&reserved=0 > > +$schema: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=04%7C01%7C%7Ca95e75ae88ca4019815908d967010cc1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637654076499658316%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=6kHpWnVUBpuw1ujpF845IbvWsSUnP7uf%2FCKoaDqXBAw%3D&reserved=0 > > + > > +title: RK818 Power Management Integrated Circuit > > + > > +maintainers: > > + - Chris Zhong <zyw@rock-chips.com> > > + - Zhang Qing <zhangqing@rock-chips.com> > > + > > +description: | > > + Rockchip RK818 series PMIC. This device consists of an i2c controlled MFD > > + that includes regulators, an RTC, and a power button. > > + > > +properties: > > + compatible: > > + enum: > > + - rockchip,rk818 > > + > > + reg: > > + maxItems: 1 > > + description: > > + The I2C slave address. > > + > > + interrupts: > > + maxItems: 1 > > + description: > > + The interrupt output of the controller. > > + > > + '#clock-cells': > > + description: | > > + From common clock binding; shall be set to 1 (multiple clock outputs). > > + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. > > + const: 1 > > + > > + clock-output-names: > > + description: > > + From common clock binding to override the default output clock name. > > + > > + rockchip,system-power-controller: > > + type: boolean > > + description: > > + Telling whether or not this PMIC is controlling the system power. > > + > > + wakeup-source: > > + type: boolean > > + description: > > + Device can be used as a wakeup source. > > + > > + vcc1-supply: > > + description: > > + The input supply for DCDC_REG1. > > + > > + vcc2-supply: > > + description: > > + The input supply for DCDC_REG2. > > + > > + vcc3-supply: > > + description: > > + The input supply for DCDC_REG3. > > + > > + vcc4-supply: > > + description: > > + The input supply for DCDC_REG4. > > + > > + boost-supply: > > + description: > > + The input supply for DCDC_BOOST > > + > > + vcc6-supply: > > + description: > > + The input supply for LDO_REG1 and LDO_REG2. > > + > > + vcc7-supply: > > + description: > > + The input supply for LDO_REG3, LDO_REG5, and LDO_REG7. > > + > > + vcc8-supply: > > + description: > > + The input supply for LDO_REG4, LDO_REG6, and LDO_REG8. > > + > > + vcc9-supply: > > + description: > > + The input supply for LDO_REG9 and SWITCH_REG. > > + > > + h_5v-supply: > > + description: > > + The input supply for HDMI_SWITCH. > > + > > + usb-supply: > > + description: > > + The input supply for OTG_SWITCH. > > + > > + regulators: > > + type: object > > + patternProperties: > > + "^(DCDC_REG[1-4]|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$": > > + type: object > > + $ref: ../regulator/regulator.yaml# > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - "#clock-cells" > > + > > +additionalProperties: false > > -- > > 2.25.1 > > > >
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt deleted file mode 100644 index 6e1b9fb1f64a..000000000000 --- a/Documentation/devicetree/bindings/mfd/rk808.txt +++ /dev/null @@ -1,503 +0,0 @@ -RK8XX Power Management Integrated Circuit - -The rk8xx family current members: -rk805 -rk808 -rk809 -rk817 -rk818 - -Required properties: -- compatible: "rockchip,rk805" -- compatible: "rockchip,rk808" -- compatible: "rockchip,rk809" -- compatible: "rockchip,rk817" -- compatible: "rockchip,rk818" -- reg: I2C slave address -- interrupts: the interrupt outputs of the controller. -- #clock-cells: from common clock binding; shall be set to 1 (multiple clock - outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. - -Optional properties: -- clock-output-names: From common clock binding to override the - default output clock name -- rockchip,system-power-controller: Telling whether or not this pmic is controlling - the system power. -- wakeup-source: Device can be used as a wakeup source. - -Optional RK805 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- vcc5-supply: The input supply for LDO_REG1 and LDO_REG2 -- vcc6-supply: The input supply for LDO_REG3 - -Optional RK808 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2 -- vcc7-supply: The input supply for LDO_REG3 and LDO_REG7 -- vcc8-supply: The input supply for SWITCH_REG1 -- vcc9-supply: The input supply for LDO_REG4 and LDO_REG5 -- vcc10-supply: The input supply for LDO_REG6 -- vcc11-supply: The input supply for LDO_REG8 -- vcc12-supply: The input supply for SWITCH_REG2 -- dvs-gpios: buck1/2 can be controlled by gpio dvs, this is GPIO specifiers - for 2 host gpio's used for dvs. The format of the gpio specifier depends in - the gpio controller. If DVS GPIOs aren't present, voltage changes will happen - very quickly with no slow ramp time. - -Optional shared RK809 and RK817 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- vcc5-supply: The input supply for LDO_REG1, LDO_REG2, LDO_REG3 -- vcc6-supply: The input supply for LDO_REG4, LDO_REG5, LDO_REG6 -- vcc7-supply: The input supply for LDO_REG7, LDO_REG8, LDO_REG9 - -Optional RK809 properties: -- vcc8-supply: The input supply for SWITCH_REG1 -- vcc9-supply: The input supply for DCDC_REG5, SWITCH_REG2 - -Optional RK817 properties: -- clocks: The input clock for the audio codec -- clock-names: The clock name for the codec clock. Should be "mclk". -- #sound-dai-cells: Needed for the interpretation of sound dais. Should be 0. - -- vcc8-supply: The input supply for BOOST -- vcc9-supply: The input supply for OTG_SWITCH -- codec: The child node for the codec to hold additional properties. - If no additional properties are required for the codec, this - node can be omitted. - -- rockchip,mic-in-differential: Telling if the microphone uses differential - mode. Should be under the codec child node. - -- battery: The child node for the charger to hold additional properties. - If a battery is not in use, this node can be omitted. If a - battery node is used, the following values are required in the - battery node itself: - rockchip,resistor-sense-micro-ohms, - rockchip,sleep-enter-current-microamp, - rockchip,sleep-filter-current-microamp, - Additionally, a phandle to a monitored-battery node that - contains the following is also required: - charge-full-design-microamp-hours, - charge-term-current-microamp, - constant-charge-current-max-microamp, - constant-charge-voltage-max-microvolt, - voltage-max-design-microvolt, - voltage-min-design-microvolt, - and a valid ocv-capacity table. -- rockchip,resistor-sense-micro-ohms: Value in microohms of the battery sense - resistor. The PMIC only supports values - of either 10000 or 20000. This value is - used by the driver to set the correct - divisor value to translate ADC readings - into the proper units of measure. -- rockchip,sleep-enter-current-microamp: Value in microamps of the sleep enter - current for the charger. Value is used - by the driver to calibrate the relax - threshold. -- rockchip,sleep-filter-current-microamp: Value in microamps of the sleep - filter current for the charger. - Value is used by the driver to derive - the sleep sample current. - -Optional RK818 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- boost-supply: The input supply for DCDC_BOOST -- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2 -- vcc7-supply: The input supply for LDO_REG3, LDO_REG5 and LDO_REG7 -- vcc8-supply: The input supply for LDO_REG4, LDO_REG6 and LDO_REG8 -- vcc9-supply: The input supply for LDO_REG9 and SWITCH_REG -- h_5v-supply: The input supply for HDMI_SWITCH -- usb-supply: The input supply for OTG_SWITCH - -Regulators: All the regulators of RK8XX to be instantiated shall be -listed in a child node named 'regulators'. Each regulator is represented -by a child node of the 'regulators' node. - - regulator-name { - /* standard regulator bindings here */ - }; - -Following regulators of the RK805 PMIC regulators are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK805 datasheet. - - - DCDC_REGn - - valid values for n are 1 to 4. - - LDO_REGn - - valid values for n are 1 to 3 - -Following regulators of the RK808 PMIC block are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK808 datasheet. - - - DCDC_REGn - - valid values for n are 1 to 4. - - LDO_REGn - - valid values for n are 1 to 8. - - SWITCH_REGn - - valid values for n are 1 to 2 - -Following regulators of the RK809 and RK817 PMIC blocks are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK809 and RK817 datasheets. - - - DCDC_REGn - - valid values for n are 1 to 5 for RK809. - - valid values for n are 1 to 4 for RK817. - - LDO_REGn - - valid values for n are 1 to 9 for RK809. - - valid values for n are 1 to 9 for RK817. - - SWITCH_REGn - - valid values for n are 1 to 2 for RK809. - - BOOST for RK817 - - OTG_SWITCH for RK817 - -Following regulators of the RK818 PMIC block are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK818 datasheet. - - - DCDC_REGn - - valid values for n are 1 to 4. - - LDO_REGn - - valid values for n are 1 to 9. - - SWITCH_REG - - HDMI_SWITCH - - OTG_SWITCH - -It is necessary to configure three pins for both the RK809 and RK817, the three -pins are "gpio_ts" "gpio_gt" "gpio_slp". - The gpio_gt and gpio_ts pins support the gpio function. - The gpio_slp pin is for controlling the pmic states, as below: - - reset - - power down - - sleep - -Standard regulator bindings are used inside regulator subnodes. Check - Documentation/devicetree/bindings/regulator/regulator.txt -for more details - -Example: - rk808: pmic@1b { - compatible = "rockchip,rk808"; - clock-output-names = "xin32k", "rk808-clkout2"; - interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; - reg = <0x1b>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - - vcc8-supply = <&vcc_18>; - vcc9-supply = <&vcc_io>; - vcc10-supply = <&vcc_io>; - vcc12-supply = <&vcc_io>; - vddio-supply = <&vccio_pmu>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1300000>; - regulator-name = "vdd_arm"; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd_gpu"; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_ddr"; - }; - - vcc_io: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_io"; - }; - - vccio_pmu: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_pmu"; - }; - - vcc_tp: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_tp"; - }; - - vdd_10: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd_10"; - }; - - vcc18_lcd: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_lcd"; - }; - - vccio_sd: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - }; - - vdd10_lcd: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd10_lcd"; - }; - - vcc_18: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_18"; - }; - - vcca_codec: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcca_codec"; - }; - - vcc_wl: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_wl"; - }; - - vcc_lcd: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_lcd"; - }; - }; - }; - - rk817: pmic@20 { - compatible = "rockchip,rk817"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; - clock-output-names = "rk808-clkout1", "xin32k"; - clock-names = "mclk"; - clocks = <&cru SCLK_I2S1_OUT>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; - wakeup-source; - #clock-cells = <1>; - #sound-dai-cells = <0>; - - vcc1-supply = <&vccsys>; - vcc2-supply = <&vccsys>; - vcc3-supply = <&vccsys>; - vcc4-supply = <&vccsys>; - vcc5-supply = <&vccsys>; - vcc6-supply = <&vccsys>; - vcc7-supply = <&vccsys>; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v3: DCDC_REG4 { - regulator-name = "vcc_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v8: LDO_REG2 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_1v0: LDO_REG3 { - regulator-name = "vdd_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc3v3_pmu: LDO_REG4 { - regulator-name = "vcc3v3_pmu"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_sd: LDO_REG6 { - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_bl: LDO_REG7 { - regulator-name = "vcc_bl"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_lcd: LDO_REG8 { - regulator-name = "vcc_lcd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <2800000>; - }; - }; - - vcc_cam: LDO_REG9 { - regulator-name = "vcc_cam"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - }; - - rk817_battery: battery { - monitored-battery = <&battery_cell>; - rockchip,resistor-sense-micro-ohms = <10000>; - rockchip,sleep-enter-current-microamp = <300000>; - rockchip,sleep-filter-current-microamp = <100000>; - }; - - rk817_codec: codec { - rockchip,mic-in-differential; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml new file mode 100644 index 000000000000..347696f1709c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk805.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK808 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK805 series PMIC. This device consists of an i2c controlled MFD + that includes multiple switchable regulators. + +properties: + compatible: + enum: + - rockchip,rk805 + + reg: + maxItems: 1 + description: + The I2C slave address. + + interrupts: + maxItems: 1 + description: + The interrupt output of the controller. + + '#clock-cells': + description: | + From common clock binding; shall be set to 1 (multiple clock outputs). + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + const: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc6-supply: + description: + The input supply for LDO_REG3. + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|LDO_REG[1-3])$": + type: object + $ref: ../regulator/regulator.yaml# + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml new file mode 100644 index 000000000000..6bec1d9e4640 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml @@ -0,0 +1,255 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk808.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK808 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK808 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and a power button. + +properties: + compatible: + enum: + - rockchip,rk808 + + reg: + maxItems: 1 + description: + The I2C slave address. + + interrupts: + maxItems: 1 + description: + The interrupt output of the controller. + + '#clock-cells': + description: | + From common clock binding; shall be set to 1 (multiple clock outputs). + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + const: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc6-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc7-supply: + description: + The input supply for LDO_REG3 and LDO_REG7. + + vcc8-supply: + description: + The input supply for SWITCH_REG1. + + vcc9-supply: + description: + The input supply for LDO_REG4 and LDO_REG5. + + vcc10-supply: + description: + The input supply for LDO_REG6. + + vcc11-supply: + description: + The input supply for LDO_REG8. + + vcc12-supply: + description: + The input supply for SWITCH_REG2. + + dvs-gpios: + description: | + buck1/2 can be controlled by gpio dvs, this is GPIO specifiers for + 2 host gpio's used for dvs. The format of the gpio specifier + depends in the gpio controller. If DVS GPIOs aren't present, + voltage changes will happen very quickly with no slow ramp time. + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$": + type: object + $ref: ../regulator/regulator.yaml# + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + clock-output-names = "xin32k", "rk808-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, + <&gpio7 15 GPIO_ACTIVE_HIGH>; + reg = <0x1b>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc8-supply = <&vcc_18>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vccio_pmu>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd_arm"; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + }; + + vccio_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_pmu"; + }; + + vcc_tp: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_tp"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + }; + + vcc18_lcd: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + + vcca_codec: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_codec"; + }; + + vcc_wl: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_wl"; + }; + + vcc_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_lcd"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml new file mode 100644 index 000000000000..6d509e863da3 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK817 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and power button. + +properties: + compatible: + enum: + - rockchip,rk809 + + reg: + maxItems: 1 + description: + The I2C slave address. + + interrupts: + maxItems: 1 + description: + The interrupt output of the controller. + + '#clock-cells': + description: | + From common clock binding; shall be set to 1 (multiple clock outputs). + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + const: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. + + vcc6-supply: + description: + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. + + vcc7-supply: + description: + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. + + vcc8-supply: + description: + The input supply for SWITCH_REG1. + + vcc9-supply: + description: + The input supply for DCDC_REG5 and SWITCH_REG2. + + regulators: + type: object + patternProperties: + "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$": + type: object + $ref: ../regulator/regulator.yaml# + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml new file mode 100644 index 000000000000..cbe6c2a9f254 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml @@ -0,0 +1,365 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK817 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, a power button, an audio codec, and a + battery charger manager. + +properties: + compatible: + enum: + - rockchip,rk817 + + reg: + maxItems: 1 + description: + The I2C slave address. + + interrupts: + maxItems: 1 + description: + The interrupt output of the controller. + + '#clock-cells': + description: | + From common clock binding; shall be set to 1 (multiple clock outputs). + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + const: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. + + vcc6-supply: + description: + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. + + vcc7-supply: + description: + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. + + vcc8-supply: + description: + The input supply for BOOST. + + vcc9-supply: + description: + The input supply for OTG_SWITCH. + + regulators: + type: object + patternProperties: + "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$": + type: object + $ref: ../regulator/regulator.yaml# + + clocks: + description: + The input clock for the audio codec. + + clock-names: + description: + The clock name for the codec clock. + items: + - const: mclk + + '#sound-dai-cells': + description: + Needed for the interpretation of sound dais. + const: 0 + + codec: + description: | + The child node for the codec to hold additional properties. If no + additional properties are required for the codec, this node can be + omitted. + type: object + properties: + rockchip,mic-in-differential: + type: boolean + description: + Describes if the microphone uses differential mode. + + battery: + description: | + The child node for the charger to hold additional properties. If a + battery is not in use, this node can be omitted. + type: object + properties: + monitored-battery: + description: | + A phandle to a monitored battery node that contains a valid + value for: + charge-full-design-microamp-hours, + charge-term-current-microamp, + constant-charge-current-max-microamp, + constant-charge-voltage-max-microvolt, + voltage-max-design-microvolt, + voltage-min-design-microvolt, + and a valid ocv-capacity table. + + rockchip,resistor-sense-micro-ohms: + description: | + Value in microohms of the battery sense resistor. This value is + used by the driver to set the correct divisor value to translate + ADC readings into the proper units of measure. + enum: [10000, 20000] + + rockchip,sleep-enter-current-microamp: + description: | + Value in microamps of the sleep enter current for the charger. + Value is used by the driver to calibrate the relax threshold. + + rockchip,sleep-filter-current-microamp: + description: + Value in microamps of the sleep filter current for the charger. + Value is used by the driver to derive the sleep sample current. + + required: + - monitored-battery + - rockchip,resistor-sense-micro-ohms + - rockchip,sleep-enter-current-microamp + - rockchip,sleep-filter-current-microamp + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "rk808-clkout1", "xin32k"; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S1_OUT>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; + wakeup-source; + #clock-cells = <1>; + #sound-dai-cells = <0>; + + vcc1-supply = <&vccsys>; + vcc2-supply = <&vccsys>; + vcc3-supply = <&vccsys>; + vcc4-supply = <&vccsys>; + vcc5-supply = <&vccsys>; + vcc6-supply = <&vccsys>; + vcc7-supply = <&vccsys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v3_pmu: LDO_REG4 { + regulator-name = "vcc3v3_pmu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_bl: LDO_REG7 { + regulator-name = "vcc_bl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lcd: LDO_REG8 { + regulator-name = "vcc_lcd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc_cam: LDO_REG9 { + regulator-name = "vcc_cam"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; + + rk817_battery: battery { + monitored-battery = <&battery_cell>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + + rk817_codec: codec { + rockchip,mic-in-differential; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml new file mode 100644 index 000000000000..8440353e5dbf --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk818.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK818 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK818 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and a power button. + +properties: + compatible: + enum: + - rockchip,rk818 + + reg: + maxItems: 1 + description: + The I2C slave address. + + interrupts: + maxItems: 1 + description: + The interrupt output of the controller. + + '#clock-cells': + description: | + From common clock binding; shall be set to 1 (multiple clock outputs). + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + const: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + boost-supply: + description: + The input supply for DCDC_BOOST + + vcc6-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc7-supply: + description: + The input supply for LDO_REG3, LDO_REG5, and LDO_REG7. + + vcc8-supply: + description: + The input supply for LDO_REG4, LDO_REG6, and LDO_REG8. + + vcc9-supply: + description: + The input supply for LDO_REG9 and SWITCH_REG. + + h_5v-supply: + description: + The input supply for HDMI_SWITCH. + + usb-supply: + description: + The input supply for OTG_SWITCH. + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$": + type: object + $ref: ../regulator/regulator.yaml# + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false