| Message ID | 20210823070240.12600-2-billy_tsai@aspeedtech.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for ast2600 ADC | expand |
On Mon, Aug 23, 2021 at 03:02:26PM +0800, Billy Tsai wrote: > Add device tree bindings document for the aspeed ast2600 adc device > driver. > > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> > --- > .../bindings/iio/adc/aspeed,ast2600-adc.yaml | 97 +++++++++++++++++++ > 1 file changed, 97 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml > > diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml > new file mode 100644 > index 000000000000..248cda7d91e9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml > @@ -0,0 +1,97 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ADC that forms part of an ASPEED server management processor. > + > +maintainers: > + - Billy Tsai <billy_tsai@aspeedtech.com> > + > +description: | > + • 10-bits resolution for 16 voltage channels. > + • The device split into two individual engine and each contains 8 voltage > + channels. > + • Channel scanning can be non-continuous. > + • Programmable ADC clock frequency. > + • Programmable upper and lower threshold for each channels. > + • Interrupt when larger or less than threshold for each channels. > + • Support hysteresis for each channels. > + • Built-in a compensating method. > + • Built-in a register to trim internal reference voltage. > + • Internal or External reference voltage. > + • Support 2 Internal reference voltage 1.2v or 2.5v. > + • Integrate dividing circuit for battery sensing. > + > +properties: > + compatible: > + enum: > + - aspeed,ast2600-adc0 > + - aspeed,ast2600-adc1 What's the difference between 0 and 1? > + > + reg: > + maxItems: 1 > + > + clocks: > + description: > + Input clock used to derive the sample clock. Expected to be the > + SoC's APB clock. How many clocks? > + > + resets: > + maxItems: 1 > + > + "#io-channel-cells": > + const: 1 > + > + vref-supply: > + description: > + The external regulator supply ADC reference voltage. > + > + aspeed,int_vref_mv: Don't use '_' in property names. Use standard unit suffixes as defined in property-units.yaml. > + $ref: /schemas/types.yaml#/definitions/uint32 And then you can drop this. > + enum: [1200, 2500] > + description: > + ADC internal reference voltage in millivolts. > + > + aspeed,battery-sensing: > + type: boolean > + description: > + Inform the driver that last channel will be used to sensor battery. > + > + aspeed,trim-data-valid: > + type: boolean > + description: | > + The ADC reference voltage can be calibrated to obtain the trimming > + data which will be stored in otp. This property informs the driver that > + the data store in the otp is valid. > + > +required: > + - compatible > + - reg > + - clocks > + - resets > + - "#io-channel-cells" > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/ast2600-clock.h> > + adc0: adc@1e6e9000 { > + compatible = "aspeed,ast2600-adc0"; > + reg = <0x1e6e9000 0x100>; > + clocks = <&syscon ASPEED_CLK_APB2>; > + resets = <&syscon ASPEED_RESET_ADC>; > + #io-channel-cells = <1>; > + aspeed,int_vref_mv = <2500>; > + }; > + adc1: adc@1e6e9100 { > + compatible = "aspeed,ast2600-adc1"; > + reg = <0x1e6e9100 0x100>; > + clocks = <&syscon ASPEED_CLK_APB2>; > + resets = <&syscon ASPEED_RESET_ADC>; > + #io-channel-cells = <1>; > + aspeed,int_vref_mv = <2500>; > + }; > +... > -- > 2.25.1 > >
Hi Rob,
On 2021/8/24, 8:13 PM, "Rob Herring" <robh@kernel.org> wrote:
On Mon, Aug 23, 2021 at 03:02:26PM +0800, Billy Tsai wrote:
> > +properties:
> > + compatible:
> > + enum:
> > + - aspeed,ast2600-adc0
> > + - aspeed,ast2600-adc1
> What's the difference between 0 and 1?
Their trimming data, which is used to calibrate internal reference volage,
locates in different address of OTP.
Best Regards,
Billy Tsai
On Wed, 25 Aug 2021 00:06:47 +0000 Billy Tsai <billy_tsai@aspeedtech.com> wrote: > Hi Rob, > > On 2021/8/24, 8:13 PM, "Rob Herring" <robh@kernel.org> wrote: > > On Mon, Aug 23, 2021 at 03:02:26PM +0800, Billy Tsai wrote: > > > +properties: > > > + compatible: > > > + enum: > > > + - aspeed,ast2600-adc0 > > > + - aspeed,ast2600-adc1 > > > What's the difference between 0 and 1? > > Their trimming data, which is used to calibrate internal reference volage, > locates in different address of OTP. At very least document that with a description: here to avoid anyone looking at this later asking the same question! Jonathan > > Best Regards, > Billy Tsai > > >
diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml new file mode 100644 index 000000000000..248cda7d91e9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC that forms part of an ASPEED server management processor. + +maintainers: + - Billy Tsai <billy_tsai@aspeedtech.com> + +description: | + • 10-bits resolution for 16 voltage channels. + • The device split into two individual engine and each contains 8 voltage + channels. + • Channel scanning can be non-continuous. + • Programmable ADC clock frequency. + • Programmable upper and lower threshold for each channels. + • Interrupt when larger or less than threshold for each channels. + • Support hysteresis for each channels. + • Built-in a compensating method. + • Built-in a register to trim internal reference voltage. + • Internal or External reference voltage. + • Support 2 Internal reference voltage 1.2v or 2.5v. + • Integrate dividing circuit for battery sensing. + +properties: + compatible: + enum: + - aspeed,ast2600-adc0 + - aspeed,ast2600-adc1 + + reg: + maxItems: 1 + + clocks: + description: + Input clock used to derive the sample clock. Expected to be the + SoC's APB clock. + + resets: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + vref-supply: + description: + The external regulator supply ADC reference voltage. + + aspeed,int_vref_mv: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1200, 2500] + description: + ADC internal reference voltage in millivolts. + + aspeed,battery-sensing: + type: boolean + description: + Inform the driver that last channel will be used to sensor battery. + + aspeed,trim-data-valid: + type: boolean + description: | + The ADC reference voltage can be calibrated to obtain the trimming + data which will be stored in otp. This property informs the driver that + the data store in the otp is valid. + +required: + - compatible + - reg + - clocks + - resets + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ast2600-clock.h> + adc0: adc@1e6e9000 { + compatible = "aspeed,ast2600-adc0"; + reg = <0x1e6e9000 0x100>; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_ADC>; + #io-channel-cells = <1>; + aspeed,int_vref_mv = <2500>; + }; + adc1: adc@1e6e9100 { + compatible = "aspeed,ast2600-adc1"; + reg = <0x1e6e9100 0x100>; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_ADC>; + #io-channel-cells = <1>; + aspeed,int_vref_mv = <2500>; + }; +...
Add device tree bindings document for the aspeed ast2600 adc device driver. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> --- .../bindings/iio/adc/aspeed,ast2600-adc.yaml | 97 +++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml