Message ID | 20210826032327.18078-9-matthew.brost@intel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Clean up GuC CI failures, simplify locking, and kernel DOC | expand |
On 26/08/2021 04:23, Matthew Brost wrote: > Add a cancel request selftest that results in an engine reset to cancel > the request as it is non-preemptable. Also insert a NOP request after > the cancelled request and confirm that it completely successfully. Which patch fixes a problem this exposes in the execlists implementation? > Signed-off-by: Matthew Brost <matthew.brost@intel.com> > --- > drivers/gpu/drm/i915/selftests/i915_request.c | 100 ++++++++++++++++++ > 1 file changed, 100 insertions(+) > > diff --git a/drivers/gpu/drm/i915/selftests/i915_request.c b/drivers/gpu/drm/i915/selftests/i915_request.c > index d67710d10615..e2c5db77f087 100644 > --- a/drivers/gpu/drm/i915/selftests/i915_request.c > +++ b/drivers/gpu/drm/i915/selftests/i915_request.c > @@ -772,6 +772,98 @@ static int __cancel_completed(struct intel_engine_cs *engine) > return err; > } > > +static int __cancel_reset(struct intel_engine_cs *engine) > +{ > + struct intel_context *ce; > + struct igt_spinner spin; > + struct i915_request *rq, *nop; > + unsigned long preempt_timeout_ms; > + int err = 0; > + You may need to skip the test if preempt timeout is compiled out or if GPU reset is altogether disabled. > + preempt_timeout_ms = engine->props.preempt_timeout_ms; > + engine->props.preempt_timeout_ms = 100; > + > + if (igt_spinner_init(&spin, engine->gt)) > + goto out_restore; > + > + ce = intel_context_create(engine); > + if (IS_ERR(ce)) { > + err = PTR_ERR(ce); > + goto out_spin; > + } > + > + rq = igt_spinner_create_request(&spin, ce, MI_NOOP); > + if (IS_ERR(rq)) { > + err = PTR_ERR(rq); > + goto out_ce; > + } > + > + pr_debug("%s: Cancelling active request\n", engine->name); "active non-preemptable" perhaps? > + i915_request_get(rq); > + i915_request_add(rq); > + if (!igt_wait_for_spinner(&spin, rq)) { > + struct drm_printer p = drm_info_printer(engine->i915->drm.dev); > + > + pr_err("Failed to start spinner on %s\n", engine->name); > + intel_engine_dump(engine, &p, "%s\n", engine->name); > + err = -ETIME; > + goto out_rq; > + } > + > + nop = intel_context_create_request(ce); > + if (IS_ERR(nop)) > + goto out_nop; > + i915_request_get(nop); > + i915_request_add(nop); > + > + i915_request_cancel(rq, -EINTR); > + > + if (i915_request_wait(rq, 0, HZ) < 0) { > + struct drm_printer p = drm_info_printer(engine->i915->drm.dev); > + > + pr_err("%s: Failed to cancel hung request\n", engine->name); > + intel_engine_dump(engine, &p, "%s\n", engine->name); > + err = -ETIME; > + goto out_nop; > + } > + > + if (rq->fence.error != -EINTR) { > + pr_err("%s: fence not cancelled (%u)\n", > + engine->name, rq->fence.error); > + err = -EINVAL; > + goto out_nop; > + } > + > + if (i915_request_wait(nop, 0, HZ) < 0) { > + struct drm_printer p = drm_info_printer(engine->i915->drm.dev); > + > + pr_err("%s: Failed to complete nop request\n", engine->name); > + intel_engine_dump(engine, &p, "%s\n", engine->name); > + err = -ETIME; > + goto out_nop; > + } > + > + if (nop->fence.error != 0) { > + pr_err("%s: Nop request errored (%u)\n", Maybe s/nop/innocent/ in the respective log messages? > + engine->name, nop->fence.error); > + err = -EINVAL; > + } > + > +out_nop: > + i915_request_put(nop); > +out_rq: > + i915_request_put(rq); > +out_ce: > + intel_context_put(ce); > +out_spin: > + igt_spinner_fini(&spin); > +out_restore: > + engine->props.preempt_timeout_ms = preempt_timeout_ms; > + if (err) > + pr_err("%s: %s error %d\n", __func__, engine->name, err); > + return err; > +} > + > static int live_cancel_request(void *arg) > { > struct drm_i915_private *i915 = arg; > @@ -804,6 +896,14 @@ static int live_cancel_request(void *arg) > return err; > if (err2) > return err2; > + > + /* Expects reset so call outside of igt_live_test_* */ Hm there are live tests like live_preempt_cancel which seemingly manage to do resets under the live test block. Regards, Tvrtko > + err = __cancel_reset(engine); > + if (err) > + return err; > + > + if (igt_flush_test(i915)) > + return -EIO; > } > > return 0; >
On Thu, Aug 26, 2021 at 10:32:54AM +0100, Tvrtko Ursulin wrote: > > On 26/08/2021 04:23, Matthew Brost wrote: > > Add a cancel request selftest that results in an engine reset to cancel > > the request as it is non-preemptable. Also insert a NOP request after > > the cancelled request and confirm that it completely successfully. > > Which patch fixes a problem this exposes in the execlists implementation? > https://patchwork.freedesktop.org/patch/451421/?series=93704&rev=6 > > Signed-off-by: Matthew Brost <matthew.brost@intel.com> > > --- > > drivers/gpu/drm/i915/selftests/i915_request.c | 100 ++++++++++++++++++ > > 1 file changed, 100 insertions(+) > > > > diff --git a/drivers/gpu/drm/i915/selftests/i915_request.c b/drivers/gpu/drm/i915/selftests/i915_request.c > > index d67710d10615..e2c5db77f087 100644 > > --- a/drivers/gpu/drm/i915/selftests/i915_request.c > > +++ b/drivers/gpu/drm/i915/selftests/i915_request.c > > @@ -772,6 +772,98 @@ static int __cancel_completed(struct intel_engine_cs *engine) > > return err; > > } > > +static int __cancel_reset(struct intel_engine_cs *engine) > > +{ > > + struct intel_context *ce; > > + struct igt_spinner spin; > > + struct i915_request *rq, *nop; > > + unsigned long preempt_timeout_ms; > > + int err = 0; > > + > > You may need to skip the test if preempt timeout is compiled out or if GPU > reset is altogether disabled. > Yes, probably. Will fix this. > > + preempt_timeout_ms = engine->props.preempt_timeout_ms; > > + engine->props.preempt_timeout_ms = 100; > > + > > + if (igt_spinner_init(&spin, engine->gt)) > > + goto out_restore; > > + > > + ce = intel_context_create(engine); > > + if (IS_ERR(ce)) { > > + err = PTR_ERR(ce); > > + goto out_spin; > > + } > > + > > + rq = igt_spinner_create_request(&spin, ce, MI_NOOP); > > + if (IS_ERR(rq)) { > > + err = PTR_ERR(rq); > > + goto out_ce; > > + } > > + > > + pr_debug("%s: Cancelling active request\n", engine->name); > > "active non-preemptable" perhaps? > Sure. > > + i915_request_get(rq); > > + i915_request_add(rq); > > + if (!igt_wait_for_spinner(&spin, rq)) { > > + struct drm_printer p = drm_info_printer(engine->i915->drm.dev); > > + > > + pr_err("Failed to start spinner on %s\n", engine->name); > > + intel_engine_dump(engine, &p, "%s\n", engine->name); > > + err = -ETIME; > > + goto out_rq; > > + } > > + > > + nop = intel_context_create_request(ce); > > + if (IS_ERR(nop)) > > + goto out_nop; > > + i915_request_get(nop); > > + i915_request_add(nop); > > + > > + i915_request_cancel(rq, -EINTR); > > + > > + if (i915_request_wait(rq, 0, HZ) < 0) { > > + struct drm_printer p = drm_info_printer(engine->i915->drm.dev); > > + > > + pr_err("%s: Failed to cancel hung request\n", engine->name); > > + intel_engine_dump(engine, &p, "%s\n", engine->name); > > + err = -ETIME; > > + goto out_nop; > > + } > > + > > + if (rq->fence.error != -EINTR) { > > + pr_err("%s: fence not cancelled (%u)\n", > > + engine->name, rq->fence.error); > > + err = -EINVAL; > > + goto out_nop; > > + } > > + > > + if (i915_request_wait(nop, 0, HZ) < 0) { > > + struct drm_printer p = drm_info_printer(engine->i915->drm.dev); > > + > > + pr_err("%s: Failed to complete nop request\n", engine->name); > > + intel_engine_dump(engine, &p, "%s\n", engine->name); > > + err = -ETIME; > > + goto out_nop; > > + } > > + > > + if (nop->fence.error != 0) { > > + pr_err("%s: Nop request errored (%u)\n", > > Maybe s/nop/innocent/ in the respective log messages? > I kinda perfer NOP. > > + engine->name, nop->fence.error); > > + err = -EINVAL; > > + } > > + > > +out_nop: > > + i915_request_put(nop); > > +out_rq: > > + i915_request_put(rq); > > +out_ce: > > + intel_context_put(ce); > > +out_spin: > > + igt_spinner_fini(&spin); > > +out_restore: > > + engine->props.preempt_timeout_ms = preempt_timeout_ms; > > + if (err) > > + pr_err("%s: %s error %d\n", __func__, engine->name, err); > > + return err; > > +} > > + > > static int live_cancel_request(void *arg) > > { > > struct drm_i915_private *i915 = arg; > > @@ -804,6 +896,14 @@ static int live_cancel_request(void *arg) > > return err; > > if (err2) > > return err2; > > + > > + /* Expects reset so call outside of igt_live_test_* */ > > Hm there are live tests like live_preempt_cancel which seemingly manage to > do resets under the live test block. > You can increment t->reset_global if a GT reset is expected, problem is only execlists do a GT while GuC submission does a GuC engine based reset so we'd have to put in a statement like this if was within the begin / end block: if !guc t->reset_global++ I'd just rather leave it as is rather than baking in execlists / guc backend specific knowledge into the test. Matt > Regards, > > Tvrtko > > > + err = __cancel_reset(engine); > > + if (err) > > + return err; > > + > > + if (igt_flush_test(i915)) > > + return -EIO; > > } > > return 0; > >
diff --git a/drivers/gpu/drm/i915/selftests/i915_request.c b/drivers/gpu/drm/i915/selftests/i915_request.c index d67710d10615..e2c5db77f087 100644 --- a/drivers/gpu/drm/i915/selftests/i915_request.c +++ b/drivers/gpu/drm/i915/selftests/i915_request.c @@ -772,6 +772,98 @@ static int __cancel_completed(struct intel_engine_cs *engine) return err; } +static int __cancel_reset(struct intel_engine_cs *engine) +{ + struct intel_context *ce; + struct igt_spinner spin; + struct i915_request *rq, *nop; + unsigned long preempt_timeout_ms; + int err = 0; + + preempt_timeout_ms = engine->props.preempt_timeout_ms; + engine->props.preempt_timeout_ms = 100; + + if (igt_spinner_init(&spin, engine->gt)) + goto out_restore; + + ce = intel_context_create(engine); + if (IS_ERR(ce)) { + err = PTR_ERR(ce); + goto out_spin; + } + + rq = igt_spinner_create_request(&spin, ce, MI_NOOP); + if (IS_ERR(rq)) { + err = PTR_ERR(rq); + goto out_ce; + } + + pr_debug("%s: Cancelling active request\n", engine->name); + i915_request_get(rq); + i915_request_add(rq); + if (!igt_wait_for_spinner(&spin, rq)) { + struct drm_printer p = drm_info_printer(engine->i915->drm.dev); + + pr_err("Failed to start spinner on %s\n", engine->name); + intel_engine_dump(engine, &p, "%s\n", engine->name); + err = -ETIME; + goto out_rq; + } + + nop = intel_context_create_request(ce); + if (IS_ERR(nop)) + goto out_nop; + i915_request_get(nop); + i915_request_add(nop); + + i915_request_cancel(rq, -EINTR); + + if (i915_request_wait(rq, 0, HZ) < 0) { + struct drm_printer p = drm_info_printer(engine->i915->drm.dev); + + pr_err("%s: Failed to cancel hung request\n", engine->name); + intel_engine_dump(engine, &p, "%s\n", engine->name); + err = -ETIME; + goto out_nop; + } + + if (rq->fence.error != -EINTR) { + pr_err("%s: fence not cancelled (%u)\n", + engine->name, rq->fence.error); + err = -EINVAL; + goto out_nop; + } + + if (i915_request_wait(nop, 0, HZ) < 0) { + struct drm_printer p = drm_info_printer(engine->i915->drm.dev); + + pr_err("%s: Failed to complete nop request\n", engine->name); + intel_engine_dump(engine, &p, "%s\n", engine->name); + err = -ETIME; + goto out_nop; + } + + if (nop->fence.error != 0) { + pr_err("%s: Nop request errored (%u)\n", + engine->name, nop->fence.error); + err = -EINVAL; + } + +out_nop: + i915_request_put(nop); +out_rq: + i915_request_put(rq); +out_ce: + intel_context_put(ce); +out_spin: + igt_spinner_fini(&spin); +out_restore: + engine->props.preempt_timeout_ms = preempt_timeout_ms; + if (err) + pr_err("%s: %s error %d\n", __func__, engine->name, err); + return err; +} + static int live_cancel_request(void *arg) { struct drm_i915_private *i915 = arg; @@ -804,6 +896,14 @@ static int live_cancel_request(void *arg) return err; if (err2) return err2; + + /* Expects reset so call outside of igt_live_test_* */ + err = __cancel_reset(engine); + if (err) + return err; + + if (igt_flush_test(i915)) + return -EIO; } return 0;
Add a cancel request selftest that results in an engine reset to cancel the request as it is non-preemptable. Also insert a NOP request after the cancelled request and confirm that it completely successfully. Signed-off-by: Matthew Brost <matthew.brost@intel.com> --- drivers/gpu/drm/i915/selftests/i915_request.c | 100 ++++++++++++++++++ 1 file changed, 100 insertions(+)