diff mbox series

[1/2] dt-bindings: display/panel: Add AUO A030JTN01

Message ID 20210828112640.7248-1-paul@crapouillou.net (mailing list archive)
State New, archived
Headers show
Series [1/2] dt-bindings: display/panel: Add AUO A030JTN01 | expand

Commit Message

Paul Cercueil Aug. 28, 2021, 11:26 a.m. UTC 
Add binding for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3
24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
interface.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 .../bindings/display/panel/auo,a030jtn01.yaml | 57 +++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml

Comments

Sam Ravnborg Aug. 29, 2021, 12:44 p.m. UTC | #1 
Hi PAul,

On Sat, Aug 28, 2021 at 12:26:39PM +0100, Paul Cercueil wrote:
> Add binding for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3
> 24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
> interface.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  .../bindings/display/panel/auo,a030jtn01.yaml | 57 +++++++++++++++++++
>  1 file changed, 57 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
> new file mode 100644
> index 000000000000..21c9d62e3625
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
> @@ -0,0 +1,57 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD
> +
> +description: |
> +  The panel must obey the rules for a SPI slave device as specified in
> +  spi/spi-controller.yaml
> +
> +maintainers:
> +  - Paul Cercueil <paul@crapouillou.net>
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: auo,a030jtn01
> +
> +  backlight: true
> +  port: true
> +  power-supply: true
> +  reg: true
> +  reset-gpios: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - power-supply
> +  - reset-gpios
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>

As this is a spi slave, then it is supposed to be a node below a spi
node.
Other bindings add:
    spi {
        #address-cells = <1>;
        #size-cells = <0>;
        ...
    }

to make this obvious.

> +
> +    panel@0 {
> +      compatible = "auo,a030jtn01";
> +      reg = <0>;
> +
> +      spi-max-frequency = <10000000>;
> +
> +      reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
> +      power-supply = <&lcd_power>;
> +
> +      backlight = <&backlight>;
> +
> +      port {
> +        panel_input: endpoint {
> +          remote-endpoint = <&panel_output>;
> +        };
> +      };
> +    };

My personal preference is indent with 4 spaces in the example - but
there is no hard rules so 2 spaces is also fine.

With or without my nits above:
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>


	Sam
Rob Herring (Arm) Aug. 29, 2021, 2:59 p.m. UTC | #2 
On Sat, 28 Aug 2021 12:26:39 +0100, Paul Cercueil wrote:
> Add binding for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3
> 24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
> interface.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  .../bindings/display/panel/auo,a030jtn01.yaml | 57 +++++++++++++++++++
>  1 file changed, 57 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dts:23.11-21: Warning (reg_format): /example-0/panel@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dt.yaml: example-0: panel@0:reg:0: [0] is too short
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1521878

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Rob Herring (Arm) Aug. 31, 2021, 1:59 p.m. UTC | #3 
On Sat, Aug 28, 2021 at 12:26:39PM +0100, Paul Cercueil wrote:
> Add binding for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3
> 24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
> interface.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  .../bindings/display/panel/auo,a030jtn01.yaml | 57 +++++++++++++++++++
>  1 file changed, 57 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml

This appears to be panel-simple.yaml plus 'reg' (and potentially other 
SPI properties). Perhaps rename to panel-simple-spi.yaml? Maybe there's 
others already?

> 
> diff --git a/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
> new file mode 100644
> index 000000000000..21c9d62e3625
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
> @@ -0,0 +1,57 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD
> +
> +description: |
> +  The panel must obey the rules for a SPI slave device as specified in
> +  spi/spi-controller.yaml
> +
> +maintainers:
> +  - Paul Cercueil <paul@crapouillou.net>
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: auo,a030jtn01
> +
> +  backlight: true
> +  port: true
> +  power-supply: true
> +  reg: true
> +  reset-gpios: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - power-supply
> +  - reset-gpios
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    panel@0 {
> +      compatible = "auo,a030jtn01";
> +      reg = <0>;
> +
> +      spi-max-frequency = <10000000>;
> +
> +      reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
> +      power-supply = <&lcd_power>;
> +
> +      backlight = <&backlight>;
> +
> +      port {
> +        panel_input: endpoint {
> +          remote-endpoint = <&panel_output>;
> +        };
> +      };
> +    };
> -- 
> 2.33.0
> 
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
new file mode 100644
index 000000000000..21c9d62e3625
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
@@ -0,0 +1,57 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD
+
+description: |
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: auo,a030jtn01
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    panel@0 {
+      compatible = "auo,a030jtn01";
+      reg = <0>;
+
+      spi-max-frequency = <10000000>;
+
+      reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
+      power-supply = <&lcd_power>;
+
+      backlight = <&backlight>;
+
+      port {
+        panel_input: endpoint {
+          remote-endpoint = <&panel_output>;
+        };
+      };
+    };