| Message ID | 20210902130516.3892452-2-adeep@lexina.in (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: meson-axg: meson-gxl: add support for JetHub D1/H1 | expand |
Hi, On 02/09/2021 15:05, Vyacheslav Bocharov wrote: > JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features: > > - square plastic case > - Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz > - no video out > - 1GB LPDDR4 > - 8/16GB eMMC flash > - 2 x USB 2.0 > - 1 x 10/100Mbps ethernet > - WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0. > - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. > - MicroSD 2.x/3.x/4.x DS/HS cards. > - 1 x gpio LED > - ADC user Button > - DC source 5V microUSB Thanks for submitting a new board ! > > Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in> > --- > arch/arm64/boot/dts/amlogic/Makefile | 1 + > .../meson-gxl-s905w-jethome-jethub-j80.dts | 325 ++++++++++++++++++ > 2 files changed, 326 insertions(+) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts > > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile > index faa0a79a34f5..2c3ce7c401a5 100644 > --- a/arch/arm64/boot/dts/amlogic/Makefile > +++ b/arch/arm64/boot/dts/amlogic/Makefile > @@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb > +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts > new file mode 100644 > index 000000000000..7b14c7c4eed5 > --- /dev/null > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts > @@ -0,0 +1,325 @@ Please add a proper SPDX Licence identifier. Don't you want to add a proper copyright header ? > + > +/dts-v1/; > + > +#include "meson-gxl.dtsi" > + > +/ { > + compatible = "jethome,j80", "amlogic,s905w", "amlogic,meson-gxl"; > + model = "JetHome JetHub J80"; > + amlogic-dt-id = "gxl_jethubj80_v1"; This attribute hasn't any upstream bindings, please remove it. > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x0 0x0 0x40000000>; > + }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + linux,cma { > + compatible = "shared-dma-pool"; > + reusable; size = <0x0 0x400000>; > + alignment = <0x0 0x400000>; > + linux,cma-default; > + }; > + }; If you want to reduce the cma pool size, simply add: reserved-memory { linux,cma { size = <0x0 0x400000>; }; }; > + > + aliases { > + serial0 = &uart_AO; /* Console */ > + serial1 = &uart_A; /* Bluetooth */ > + serial2 = &uart_AO_B; /* Wireless module 1 */ > + serial3 = &uart_C; /* Wireless module 2 */ > + ethernet0 = ðmac; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + vddio_ao18: regulator-vddio_ao18 { > + compatible = "regulator-fixed"; > + regulator-name = "VDDIO_AO18"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vddio_boot: regulator-vddio_boot { > + compatible = "regulator-fixed"; > + regulator-name = "VDDIO_BOOT"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vddao_3v3: regulator-vddao_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VDDAO_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + vcc_3v3: regulator-vcc_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + emmc_pwrseq: emmc-pwrseq { > + compatible = "mmc-pwrseq-emmc"; > + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; > + }; > + > + wifi32k: wifi32k { > + compatible = "pwm-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; > + clocks = <&wifi32k>; > + clock-names = "ext_clock"; > + }; > + > + partitions: partitions { > + parts = <1>; > + part-0 = <&rootfs>; > + rootfs: rootfs { > + pname = "rootfs"; > + size = <0xffffffff 0xffffffff>; > + mask = <4>; > + }; > + }; This node hasn't any upstream bindings, please remove it. > + > + efusekey: efusekey { > + keynum = <5>; > + key0 = <&key_0>; > + key1 = <&key_1>; > + key2 = <&key_2>; > + key3 = <&key_3>; > + key4 = <&key_4>; > + > + key_0: key_0 { > + keyname = "mac"; > + offset = <0>; > + size = <6>; > + }; > + key_1: key_1 { > + keyname = "mac_bt"; > + offset = <6>; > + size = <6>; > + }; > + key_2: key_2 { > + keyname = "mac_wifi"; > + offset = <12>; > + size = <6>; > + }; > + key_3: key_3 { > + keyname = "usid"; > + offset = <18>; > + size = <32>; > + }; > + key_4: key_4 { > + keyname = "serial"; > + offset = <50>; > + size = <32>; > + }; > + }; //End efusekey This node hasn't any upstream bindings, please remove it. > + > + unifykey { > + compatible = "amlogic, unifykey"; > + status = "ok"; > + unifykey-num = <6>; > + unifykey-index-0 = <&keysn_0>; > + unifykey-index-1 = <&keysn_1>; > + unifykey-index-2 = <&keysn_2>; > + unifykey-index-3 = <&keysn_3>; > + unifykey-index-4 = <&keysn_4>; > + unifykey-index-5 = <&keysn_5>; > + > + keysn_0: key_0 { > + key-name = "usid"; > + key-device = "efuse"; > + key-permit = "read","write"; > + }; > + keysn_1: key_1 { > + key-name = "mac"; > + key-device = "efuse"; > + key-permit = "read","write"; > + }; > + keysn_2: key_2 { > + key-name = "mac_bt"; > + key-device = "normal"; > + key-permit = "read","write","del"; > + key-type = "mac"; > + }; > + keysn_3: key_3 { > + key-name = "mac_wifi"; > + key-device = "normal"; > + key-permit = "read","write","del"; > + key-type = "mac"; > + }; > + keysn_4: key_4 { > + key-name = "serial"; > + key-device = "efuse"; > + key-permit = "read","write"; > + }; > + keysn_5:key_5 { > + key-name = "deviceid"; > + key-device = "normal"; > + key-permit = "read","write","del"; > + }; > + }; //End unifykey > +}; This node hasn't any upstream bindings, please remove it. > + > +&usb { > + status = "okay"; > + dr_mode = "host"; > +}; > + > +&efuse { > + status = "okay"; > + compatible = "amlogic,meson-gxbb-efuse", "amlogic, efuse"; > + read_cmd = <0x82000030>; > + write_cmd = <0x82000031>; > + get_max_cmd = <0x82000033>; > + key = <&efusekey>; > + clock-names = "efuse_clk"; > +}; Looking at Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt : remove "amlogic, efuse", and all the other attributes. > + > +&pwm_ef { > + status = "okay"; > + pinctrl-0 = <&pwm_e_pins>; > + pinctrl-names = "default"; > + clocks = <&clkc CLKID_FCLK_DIV4>; > + clock-names = "clkin0"; > +}; > + > +&saradc { > + status = "okay"; > + vref-supply = <&vddio_ao18>; > +}; > + > +/* Wireless SDIO Module */ > +&sd_emmc_a { > + status = "okay"; > + pinctrl-0 = <&sdio_pins>; > + pinctrl-1 = <&sdio_clk_gate_pins>; > + pinctrl-names = "default", "clk-gate"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + bus-width = <4>; > + cap-sd-highspeed; > + max-frequency = <50000000>; > + > + non-removable; > + disable-wp; > + > + /* WiFi firmware requires power to be kept while in suspend */ > + keep-power-in-suspend; > + > + mmc-pwrseq = <&sdio_pwrseq>; > + > + vmmc-supply = <&vddao_3v3>; > + vqmmc-supply = <&vddio_boot>; > +}; > + > +/* SD card */ > +&sd_emmc_b { > + status = "okay"; > + pinctrl-0 = <&sdcard_pins>; > + pinctrl-1 = <&sdcard_clk_gate_pins>; > + pinctrl-names = "default", "clk-gate"; > + > + bus-width = <4>; > + cap-sd-highspeed; > + max-frequency = <50000000>; > + disable-wp; > + > + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; > + > + vmmc-supply = <&vddao_3v3>; > + vqmmc-supply = <&vddio_boot>; > +}; > + > +/* eMMC */ > +&sd_emmc_c { > + status = "okay"; > + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; > + pinctrl-1 = <&emmc_clk_gate_pins>; > + pinctrl-names = "default", "clk-gate"; > + > + bus-width = <8>; > + cap-mmc-highspeed; > + max-frequency = <200000000>; > + non-removable; > + disable-wp; > + mmc-ddr-1_8v; > + mmc-hs200-1_8v; > + > + mmc-pwrseq = <&emmc_pwrseq>; > + vmmc-supply = <&vcc_3v3>; > + vqmmc-supply = <&vddio_boot>; > +}; > + > +/* Console UART */ > +&uart_AO { > + status = "okay"; > + pinctrl-0 = <&uart_ao_a_pins>; > + pinctrl-names = "default"; > +}; > + > +/* S905X only has access to its internal PHY */ Did you mean S905W ? > +ðmac { > + reg = <0x0 0xc9410000 0x0 0x10000 > + 0x0 0xc8834540 0x0 0x4 > + 0x0 0xc8834558 0x0 0xc > + 0x0 0xc1104408 0x0 0x4>; > + amlogic,eth-leds = <0x91>; This attribute isn't defined in upstream bindings. > + status = "okay"; > + phy-mode = "rmii"; > + phy-handle = <&internal_phy>; > +}; > + > +&internal_phy { > + status = "okay"; > + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; > + pinctrl-names = "default"; > +}; > + > +&uart_A { > + status = "okay"; > + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; > + pinctrl-names = "default"; > + uart-has-rtscts; > +}; > + > +&uart_C { > + status = "okay"; > + pinctrl-0 = <&uart_c_pins>; > + pinctrl-names = "default"; > +}; > + > +&uart_AO_B { > + status = "okay"; > + pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>; > + pinctrl-names = "default"; > + uart-has-rtscts; > +}; > + > +&i2c_B { > + status = "okay"; > + pinctrl-names="default"; > + pinctrl-0=<&i2c_b_pins>; Please add spaces before and after the "=". > + > + pcf8563: pcf8563@51 { > + compatible = "nxp,pcf8563"; > + reg = <0x51>; > + status = "okay"; > + }; > +}; > + > Thanks, Neil
02.09.2021 16:19, Neil Armstrong пишет: > Hi, > > On 02/09/2021 15:05, Vyacheslav Bocharov wrote: >> JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features: >> > Thanks for submitting a new board ! Thanks for good review. I have posted patch v2.
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index faa0a79a34f5..2c3ce7c401a5 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts new file mode 100644 index 000000000000..7b14c7c4eed5 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts @@ -0,0 +1,325 @@ + +/dts-v1/; + +#include "meson-gxl.dtsi" + +/ { + compatible = "jethome,j80", "amlogic,s905w", "amlogic,meson-gxl"; + model = "JetHome JetHub J80"; + amlogic-dt-id = "gxl_jethubj80_v1"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + linux,cma { + compatible = "shared-dma-pool"; + reusable; size = <0x0 0x400000>; + alignment = <0x0 0x400000>; + linux,cma-default; + }; + }; + + aliases { + serial0 = &uart_AO; /* Console */ + serial1 = &uart_A; /* Bluetooth */ + serial2 = &uart_AO_B; /* Wireless module 1 */ + serial3 = &uart_C; /* Wireless module 2 */ + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + partitions: partitions { + parts = <1>; + part-0 = <&rootfs>; + rootfs: rootfs { + pname = "rootfs"; + size = <0xffffffff 0xffffffff>; + mask = <4>; + }; + }; + + efusekey: efusekey { + keynum = <5>; + key0 = <&key_0>; + key1 = <&key_1>; + key2 = <&key_2>; + key3 = <&key_3>; + key4 = <&key_4>; + + key_0: key_0 { + keyname = "mac"; + offset = <0>; + size = <6>; + }; + key_1: key_1 { + keyname = "mac_bt"; + offset = <6>; + size = <6>; + }; + key_2: key_2 { + keyname = "mac_wifi"; + offset = <12>; + size = <6>; + }; + key_3: key_3 { + keyname = "usid"; + offset = <18>; + size = <32>; + }; + key_4: key_4 { + keyname = "serial"; + offset = <50>; + size = <32>; + }; + }; //End efusekey + + unifykey { + compatible = "amlogic, unifykey"; + status = "ok"; + unifykey-num = <6>; + unifykey-index-0 = <&keysn_0>; + unifykey-index-1 = <&keysn_1>; + unifykey-index-2 = <&keysn_2>; + unifykey-index-3 = <&keysn_3>; + unifykey-index-4 = <&keysn_4>; + unifykey-index-5 = <&keysn_5>; + + keysn_0: key_0 { + key-name = "usid"; + key-device = "efuse"; + key-permit = "read","write"; + }; + keysn_1: key_1 { + key-name = "mac"; + key-device = "efuse"; + key-permit = "read","write"; + }; + keysn_2: key_2 { + key-name = "mac_bt"; + key-device = "normal"; + key-permit = "read","write","del"; + key-type = "mac"; + }; + keysn_3: key_3 { + key-name = "mac_wifi"; + key-device = "normal"; + key-permit = "read","write","del"; + key-type = "mac"; + }; + keysn_4: key_4 { + key-name = "serial"; + key-device = "efuse"; + key-permit = "read","write"; + }; + keysn_5:key_5 { + key-name = "deviceid"; + key-device = "normal"; + key-permit = "read","write","del"; + }; + }; //End unifykey +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; + +&efuse { + status = "okay"; + compatible = "amlogic,meson-gxbb-efuse", "amlogic, efuse"; + read_cmd = <0x82000030>; + write_cmd = <0x82000031>; + get_max_cmd = <0x82000033>; + key = <&efusekey>; + clock-names = "efuse_clk"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* Console UART */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* S905X only has access to its internal PHY */ +ðmac { + reg = <0x0 0xc9410000 0x0 0x10000 + 0x0 0xc8834540 0x0 0x4 + 0x0 0xc8834558 0x0 0xc + 0x0 0xc1104408 0x0 0x4>; + amlogic,eth-leds = <0x91>; + status = "okay"; + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; + +&internal_phy { + status = "okay"; + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; + pinctrl-names = "default"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&uart_C { + status = "okay"; + pinctrl-0 = <&uart_c_pins>; + pinctrl-names = "default"; +}; + +&uart_AO_B { + status = "okay"; + pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&i2c_B { + status = "okay"; + pinctrl-names="default"; + pinctrl-0=<&i2c_b_pins>; + + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + status = "okay"; + }; +}; +
JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features: - square plastic case - Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 1GB LPDDR4 - 8/16GB eMMC flash - 2 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0. - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - MicroSD 2.x/3.x/4.x DS/HS cards. - 1 x gpio LED - ADC user Button - DC source 5V microUSB Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in> --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../meson-gxl-s905w-jethome-jethub-j80.dts | 325 ++++++++++++++++++ 2 files changed, 326 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts