| Message ID | 19da8ae0c05381b0967c8a334b67f86b814eb880.1630031207.git.vilhelm.gray@gmail.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | Introduce the Counter character device interface | expand |
On Fri, 27 Aug 2021 12:47:48 +0900 William Breathitt Gray <vilhelm.gray@gmail.com> wrote: > The Counter subsystem architecture and driver implementations have > changed in order to handle Counter sysfs interactions in a more > consistent way. This patch updates the Generic Counter interface > header file comments to reflect the changes. > > Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>f Applied > --- > drivers/counter/counter-core.c | 3 ++ > include/linux/counter.h | 62 ++++++++++++++++------------------ > 2 files changed, 33 insertions(+), 32 deletions(-) > > diff --git a/drivers/counter/counter-core.c b/drivers/counter/counter-core.c > index c533a6ff12cf..3cda2c47bacb 100644 > --- a/drivers/counter/counter-core.c > +++ b/drivers/counter/counter-core.c > @@ -38,6 +38,9 @@ static struct bus_type counter_bus_type = { > * This function registers a Counter to the system. A sysfs "counter" directory > * will be created and populated with sysfs attributes correlating with the > * Counter Signals, Synapses, and Counts respectively. > + * > + * RETURNS: > + * 0 on success, negative error number on failure. > */ > int counter_register(struct counter_device *const counter) > { > diff --git a/include/linux/counter.h b/include/linux/counter.h > index b69277f5c4c5..445f22d8bfe2 100644 > --- a/include/linux/counter.h > +++ b/include/linux/counter.h > @@ -188,11 +188,10 @@ struct counter_comp { > > /** > * struct counter_signal - Counter Signal node > - * @id: unique ID used to identify signal > - * @name: device-specific Signal name; ideally, this should match the name > - * as it appears in the datasheet documentation > - * @ext: optional array of Counter Signal extensions > - * @num_ext: number of Counter Signal extensions specified in @ext > + * @id: unique ID used to identify the Signal > + * @name: device-specific Signal name > + * @ext: optional array of Signal extensions > + * @num_ext: number of Signal extensions specified in @ext > */ > struct counter_signal { > int id; > @@ -206,7 +205,7 @@ struct counter_signal { > * struct counter_synapse - Counter Synapse node > * @actions_list: array of available action modes > * @num_actions: number of action modes specified in @actions_list > - * @signal: pointer to associated signal > + * @signal: pointer to the associated Signal > */ > struct counter_synapse { > const enum counter_synapse_action *actions_list; > @@ -217,15 +216,14 @@ struct counter_synapse { > > /** > * struct counter_count - Counter Count node > - * @id: unique ID used to identify Count > - * @name: device-specific Count name; ideally, this should match > - * the name as it appears in the datasheet documentation > - * @functions_list: array available function modes > + * @id: unique ID used to identify the Count > + * @name: device-specific Count name > + * @functions_list: array of available function modes > * @num_functions: number of function modes specified in @functions_list > - * @synapses: array of synapses for initialization > - * @num_synapses: number of synapses specified in @synapses > - * @ext: optional array of Counter Count extensions > - * @num_ext: number of Counter Count extensions specified in @ext > + * @synapses: array of Synapses for initialization > + * @num_synapses: number of Synapses specified in @synapses > + * @ext: optional array of Count extensions > + * @num_ext: number of Count extensions specified in @ext > */ > struct counter_count { > int id; > @@ -243,27 +241,27 @@ struct counter_count { > > /** > * struct counter_ops - Callbacks from driver > - * @signal_read: optional read callback for Signal attribute. The read > - * level of the respective Signal should be passed back via > - * the level parameter. > - * @count_read: optional read callback for Count attribute. The read > - * value of the respective Count should be passed back via > - * the val parameter. > - * @count_write: optional write callback for Count attribute. The write > - * value for the respective Count is passed in via the val > + * @signal_read: optional read callback for Signals. The read level of > + * the respective Signal should be passed back via the > + * level parameter. > + * @count_read: read callback for Counts. The read value of the > + * respective Count should be passed back via the value > + * parameter. > + * @count_write: optional write callback for Counts. The write value for > + * the respective Count is passed in via the value > * parameter. > * @function_read: read callback the Count function modes. The read > * function mode of the respective Count should be passed > * back via the function parameter. > - * @function_write: write callback for Count function modes. The function > - * mode to write for the respective Count is passed in via > - * the function parameter. > - * @action_read: read callback the Synapse action modes. The read action > - * mode of the respective Synapse should be passed back via > - * the action parameter. > - * @action_write: write callback for Synapse action modes. The action mode > - * to write for the respective Synapse is passed in via the > - * action parameter. > + * @function_write: optional write callback for Count function modes. The > + * function mode to write for the respective Count is > + * passed in via the function parameter. > + * @action_read: optional read callback the Synapse action modes. The > + * read action mode of the respective Synapse should be > + * passed back via the action parameter. > + * @action_write: optional write callback for Synapse action modes. The > + * action mode to write for the respective Synapse is > + * passed in via the action parameter. > */ > struct counter_ops { > int (*signal_read)(struct counter_device *counter, > @@ -291,7 +289,7 @@ struct counter_ops { > > /** > * struct counter_device - Counter data structure > - * @name: name of the device as it appears in the datasheet > + * @name: name of the device > * @parent: optional parent device providing the counters > * @ops: callbacks from driver > * @signals: array of Signals
diff --git a/drivers/counter/counter-core.c b/drivers/counter/counter-core.c index c533a6ff12cf..3cda2c47bacb 100644 --- a/drivers/counter/counter-core.c +++ b/drivers/counter/counter-core.c @@ -38,6 +38,9 @@ static struct bus_type counter_bus_type = { * This function registers a Counter to the system. A sysfs "counter" directory * will be created and populated with sysfs attributes correlating with the * Counter Signals, Synapses, and Counts respectively. + * + * RETURNS: + * 0 on success, negative error number on failure. */ int counter_register(struct counter_device *const counter) { diff --git a/include/linux/counter.h b/include/linux/counter.h index b69277f5c4c5..445f22d8bfe2 100644 --- a/include/linux/counter.h +++ b/include/linux/counter.h @@ -188,11 +188,10 @@ struct counter_comp { /** * struct counter_signal - Counter Signal node - * @id: unique ID used to identify signal - * @name: device-specific Signal name; ideally, this should match the name - * as it appears in the datasheet documentation - * @ext: optional array of Counter Signal extensions - * @num_ext: number of Counter Signal extensions specified in @ext + * @id: unique ID used to identify the Signal + * @name: device-specific Signal name + * @ext: optional array of Signal extensions + * @num_ext: number of Signal extensions specified in @ext */ struct counter_signal { int id; @@ -206,7 +205,7 @@ struct counter_signal { * struct counter_synapse - Counter Synapse node * @actions_list: array of available action modes * @num_actions: number of action modes specified in @actions_list - * @signal: pointer to associated signal + * @signal: pointer to the associated Signal */ struct counter_synapse { const enum counter_synapse_action *actions_list; @@ -217,15 +216,14 @@ struct counter_synapse { /** * struct counter_count - Counter Count node - * @id: unique ID used to identify Count - * @name: device-specific Count name; ideally, this should match - * the name as it appears in the datasheet documentation - * @functions_list: array available function modes + * @id: unique ID used to identify the Count + * @name: device-specific Count name + * @functions_list: array of available function modes * @num_functions: number of function modes specified in @functions_list - * @synapses: array of synapses for initialization - * @num_synapses: number of synapses specified in @synapses - * @ext: optional array of Counter Count extensions - * @num_ext: number of Counter Count extensions specified in @ext + * @synapses: array of Synapses for initialization + * @num_synapses: number of Synapses specified in @synapses + * @ext: optional array of Count extensions + * @num_ext: number of Count extensions specified in @ext */ struct counter_count { int id; @@ -243,27 +241,27 @@ struct counter_count { /** * struct counter_ops - Callbacks from driver - * @signal_read: optional read callback for Signal attribute. The read - * level of the respective Signal should be passed back via - * the level parameter. - * @count_read: optional read callback for Count attribute. The read - * value of the respective Count should be passed back via - * the val parameter. - * @count_write: optional write callback for Count attribute. The write - * value for the respective Count is passed in via the val + * @signal_read: optional read callback for Signals. The read level of + * the respective Signal should be passed back via the + * level parameter. + * @count_read: read callback for Counts. The read value of the + * respective Count should be passed back via the value + * parameter. + * @count_write: optional write callback for Counts. The write value for + * the respective Count is passed in via the value * parameter. * @function_read: read callback the Count function modes. The read * function mode of the respective Count should be passed * back via the function parameter. - * @function_write: write callback for Count function modes. The function - * mode to write for the respective Count is passed in via - * the function parameter. - * @action_read: read callback the Synapse action modes. The read action - * mode of the respective Synapse should be passed back via - * the action parameter. - * @action_write: write callback for Synapse action modes. The action mode - * to write for the respective Synapse is passed in via the - * action parameter. + * @function_write: optional write callback for Count function modes. The + * function mode to write for the respective Count is + * passed in via the function parameter. + * @action_read: optional read callback the Synapse action modes. The + * read action mode of the respective Synapse should be + * passed back via the action parameter. + * @action_write: optional write callback for Synapse action modes. The + * action mode to write for the respective Synapse is + * passed in via the action parameter. */ struct counter_ops { int (*signal_read)(struct counter_device *counter, @@ -291,7 +289,7 @@ struct counter_ops { /** * struct counter_device - Counter data structure - * @name: name of the device as it appears in the datasheet + * @name: name of the device * @parent: optional parent device providing the counters * @ops: callbacks from driver * @signals: array of Signals
The Counter subsystem architecture and driver implementations have changed in order to handle Counter sysfs interactions in a more consistent way. This patch updates the Generic Counter interface header file comments to reflect the changes. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> --- drivers/counter/counter-core.c | 3 ++ include/linux/counter.h | 62 ++++++++++++++++------------------ 2 files changed, 33 insertions(+), 32 deletions(-)