| Message ID | 20210904000543.2019010-3-saravanak@google.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Fix simple-bus issues with fw_devlink | expand |
On Sat, 4 Sept 2021 at 02:05, Saravana Kannan <saravanak@google.com> wrote: > > The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to > work with fw_devlink. So, always compile it in for CONFIG_OF and delete > the config since it's no longer necessary. > > Signed-off-by: Saravana Kannan <saravanak@google.com> Some comments, see below. Nevertheless, feel free to add: Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Kind regards Uffe > --- > arch/arm/configs/multi_v7_defconfig | 1 - > arch/arm/configs/oxnas_v6_defconfig | 1 - > arch/arm/configs/shmobile_defconfig | 1 - > arch/arm/mach-omap2/Kconfig | 1 - > arch/arm64/configs/defconfig | 1 - > drivers/bus/Kconfig | 12 ------------ > drivers/bus/Makefile | 2 +- > drivers/soc/canaan/Kconfig | 1 - > 8 files changed, 1 insertion(+), 19 deletions(-) Not sure what other people think (and it's not my call to make), but I would suggest to split this up in four pieces (drivers/bus, drivers/soc, arm, arm64) The important part is that the change in drivers/bus gets merged as part of your series, to make sure we don't break anything. > > diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig > index d9abaae118dd..362720ae8d65 100644 > --- a/arch/arm/configs/multi_v7_defconfig > +++ b/arch/arm/configs/multi_v7_defconfig > @@ -196,7 +196,6 @@ CONFIG_PCI_EPF_TEST=m > CONFIG_DEVTMPFS=y > CONFIG_DEVTMPFS_MOUNT=y > CONFIG_OMAP_OCP2SCP=y > -CONFIG_SIMPLE_PM_BUS=y > CONFIG_MTD=y > CONFIG_MTD_CMDLINE_PARTS=y > CONFIG_MTD_BLOCK=y > diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig > index cae0db6b4eaf..de37f7e90999 100644 > --- a/arch/arm/configs/oxnas_v6_defconfig > +++ b/arch/arm/configs/oxnas_v6_defconfig > @@ -46,7 +46,6 @@ CONFIG_DEVTMPFS=y > CONFIG_DEVTMPFS_MOUNT=y > CONFIG_DMA_CMA=y > CONFIG_CMA_SIZE_MBYTES=64 > -CONFIG_SIMPLE_PM_BUS=y > CONFIG_MTD=y > CONFIG_MTD_CMDLINE_PARTS=y > CONFIG_MTD_BLOCK=y > diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig > index d9a27e4e0914..18d2a960b2d2 100644 > --- a/arch/arm/configs/shmobile_defconfig > +++ b/arch/arm/configs/shmobile_defconfig > @@ -40,7 +40,6 @@ CONFIG_PCI_RCAR_GEN2=y > CONFIG_PCIE_RCAR_HOST=y > CONFIG_DEVTMPFS=y > CONFIG_DEVTMPFS_MOUNT=y > -CONFIG_SIMPLE_PM_BUS=y > CONFIG_MTD=y > CONFIG_MTD_BLOCK=y > CONFIG_MTD_CFI=y > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 7df8f5276ddf..02f2f3157f07 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -112,7 +112,6 @@ config ARCH_OMAP2PLUS > select PM_GENERIC_DOMAINS > select PM_GENERIC_DOMAINS_OF > select RESET_CONTROLLER > - select SIMPLE_PM_BUS > select SOC_BUS > select TI_SYSC > select OMAP_IRQCHIP > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > index f423d08b9a71..474b1f2e3f06 100644 > --- a/arch/arm64/configs/defconfig > +++ b/arch/arm64/configs/defconfig > @@ -245,7 +245,6 @@ CONFIG_DEVTMPFS_MOUNT=y > CONFIG_FW_LOADER_USER_HELPER=y > CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y > CONFIG_HISILICON_LPC=y > -CONFIG_SIMPLE_PM_BUS=y > CONFIG_FSL_MC_BUS=y > CONFIG_TEGRA_ACONNECT=m > CONFIG_GNSS=m > diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig > index e7f7eee6ee9a..dc3801369488 100644 > --- a/drivers/bus/Kconfig > +++ b/drivers/bus/Kconfig > @@ -141,18 +141,6 @@ config QCOM_EBI2 > Interface 2, which can be used to connect things like NAND Flash, > SRAM, ethernet adapters, FPGAs and LCD displays. > > -config SIMPLE_PM_BUS > - tristate "Simple Power-Managed Bus Driver" > - depends on OF && PM > - help > - Driver for transparent busses that don't need a real driver, but > - where the bus controller is part of a PM domain, or under the control > - of a functional clock, and thus relies on runtime PM for managing > - this PM domain and/or clock. > - An example of such a bus controller is the Renesas Bus State > - Controller (BSC, sometimes called "LBSC within Bus Bridge", or > - "External Bus Interface") as found on several Renesas ARM SoCs. > - > config SUN50I_DE2_BUS > bool "Allwinner A64 DE2 Bus Driver" > default ARM64 > diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile > index 397e35392bff..86aacd36a56d 100644 > --- a/drivers/bus/Makefile > +++ b/drivers/bus/Makefile > @@ -26,7 +26,7 @@ obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o > obj-$(CONFIG_QCOM_EBI2) += qcom-ebi2.o > obj-$(CONFIG_SUN50I_DE2_BUS) += sun50i-de2.o > obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o > -obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o > +obj-$(CONFIG_OF) += simple-pm-bus.o > obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o > obj-$(CONFIG_TEGRA_GMI) += tegra-gmi.o > obj-$(CONFIG_TI_PWMSS) += ti-pwmss.o > diff --git a/drivers/soc/canaan/Kconfig b/drivers/soc/canaan/Kconfig > index 8179b69518b4..853096b7e84c 100644 > --- a/drivers/soc/canaan/Kconfig > +++ b/drivers/soc/canaan/Kconfig > @@ -5,7 +5,6 @@ config SOC_K210_SYSCTL > depends on RISCV && SOC_CANAAN && OF > default SOC_CANAAN > select PM > - select SIMPLE_PM_BUS > select SYSCON > select MFD_SYSCON > help > -- > 2.33.0.153.gba50c8fa24-goog >
On Tue, Sep 7, 2021 at 3:29 AM Ulf Hansson <ulf.hansson@linaro.org> wrote: > > On Sat, 4 Sept 2021 at 02:05, Saravana Kannan <saravanak@google.com> wrote: > > > > The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to > > work with fw_devlink. So, always compile it in for CONFIG_OF and delete > > the config since it's no longer necessary. > > > > Signed-off-by: Saravana Kannan <saravanak@google.com> > > Some comments, see below. Nevertheless, feel free to add: > > Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Thanks. > > Kind regards > Uffe > > > --- > > arch/arm/configs/multi_v7_defconfig | 1 - > > arch/arm/configs/oxnas_v6_defconfig | 1 - > > arch/arm/configs/shmobile_defconfig | 1 - > > arch/arm/mach-omap2/Kconfig | 1 - > > arch/arm64/configs/defconfig | 1 - > > drivers/bus/Kconfig | 12 ------------ > > drivers/bus/Makefile | 2 +- > > drivers/soc/canaan/Kconfig | 1 - > > 8 files changed, 1 insertion(+), 19 deletions(-) > > Not sure what other people think (and it's not my call to make), but I > would suggest to split this up in four pieces (drivers/bus, > drivers/soc, arm, arm64) > > The important part is that the change in drivers/bus gets merged as > part of your series, to make sure we don't break anything. I think it'll be better if it's one commit like this and we have Greg up the series. That way, there's no chance of broken trees anywhere. -Saravana > > > > > diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig > > index d9abaae118dd..362720ae8d65 100644 > > --- a/arch/arm/configs/multi_v7_defconfig > > +++ b/arch/arm/configs/multi_v7_defconfig > > @@ -196,7 +196,6 @@ CONFIG_PCI_EPF_TEST=m > > CONFIG_DEVTMPFS=y > > CONFIG_DEVTMPFS_MOUNT=y > > CONFIG_OMAP_OCP2SCP=y > > -CONFIG_SIMPLE_PM_BUS=y > > CONFIG_MTD=y > > CONFIG_MTD_CMDLINE_PARTS=y > > CONFIG_MTD_BLOCK=y > > diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig > > index cae0db6b4eaf..de37f7e90999 100644 > > --- a/arch/arm/configs/oxnas_v6_defconfig > > +++ b/arch/arm/configs/oxnas_v6_defconfig > > @@ -46,7 +46,6 @@ CONFIG_DEVTMPFS=y > > CONFIG_DEVTMPFS_MOUNT=y > > CONFIG_DMA_CMA=y > > CONFIG_CMA_SIZE_MBYTES=64 > > -CONFIG_SIMPLE_PM_BUS=y > > CONFIG_MTD=y > > CONFIG_MTD_CMDLINE_PARTS=y > > CONFIG_MTD_BLOCK=y > > diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig > > index d9a27e4e0914..18d2a960b2d2 100644 > > --- a/arch/arm/configs/shmobile_defconfig > > +++ b/arch/arm/configs/shmobile_defconfig > > @@ -40,7 +40,6 @@ CONFIG_PCI_RCAR_GEN2=y > > CONFIG_PCIE_RCAR_HOST=y > > CONFIG_DEVTMPFS=y > > CONFIG_DEVTMPFS_MOUNT=y > > -CONFIG_SIMPLE_PM_BUS=y > > CONFIG_MTD=y > > CONFIG_MTD_BLOCK=y > > CONFIG_MTD_CFI=y > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > > index 7df8f5276ddf..02f2f3157f07 100644 > > --- a/arch/arm/mach-omap2/Kconfig > > +++ b/arch/arm/mach-omap2/Kconfig > > @@ -112,7 +112,6 @@ config ARCH_OMAP2PLUS > > select PM_GENERIC_DOMAINS > > select PM_GENERIC_DOMAINS_OF > > select RESET_CONTROLLER > > - select SIMPLE_PM_BUS > > select SOC_BUS > > select TI_SYSC > > select OMAP_IRQCHIP > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > > index f423d08b9a71..474b1f2e3f06 100644 > > --- a/arch/arm64/configs/defconfig > > +++ b/arch/arm64/configs/defconfig > > @@ -245,7 +245,6 @@ CONFIG_DEVTMPFS_MOUNT=y > > CONFIG_FW_LOADER_USER_HELPER=y > > CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y > > CONFIG_HISILICON_LPC=y > > -CONFIG_SIMPLE_PM_BUS=y > > CONFIG_FSL_MC_BUS=y > > CONFIG_TEGRA_ACONNECT=m > > CONFIG_GNSS=m > > diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig > > index e7f7eee6ee9a..dc3801369488 100644 > > --- a/drivers/bus/Kconfig > > +++ b/drivers/bus/Kconfig > > @@ -141,18 +141,6 @@ config QCOM_EBI2 > > Interface 2, which can be used to connect things like NAND Flash, > > SRAM, ethernet adapters, FPGAs and LCD displays. > > > > -config SIMPLE_PM_BUS > > - tristate "Simple Power-Managed Bus Driver" > > - depends on OF && PM > > - help > > - Driver for transparent busses that don't need a real driver, but > > - where the bus controller is part of a PM domain, or under the control > > - of a functional clock, and thus relies on runtime PM for managing > > - this PM domain and/or clock. > > - An example of such a bus controller is the Renesas Bus State > > - Controller (BSC, sometimes called "LBSC within Bus Bridge", or > > - "External Bus Interface") as found on several Renesas ARM SoCs. > > - > > config SUN50I_DE2_BUS > > bool "Allwinner A64 DE2 Bus Driver" > > default ARM64 > > diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile > > index 397e35392bff..86aacd36a56d 100644 > > --- a/drivers/bus/Makefile > > +++ b/drivers/bus/Makefile > > @@ -26,7 +26,7 @@ obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o > > obj-$(CONFIG_QCOM_EBI2) += qcom-ebi2.o > > obj-$(CONFIG_SUN50I_DE2_BUS) += sun50i-de2.o > > obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o > > -obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o > > +obj-$(CONFIG_OF) += simple-pm-bus.o > > obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o > > obj-$(CONFIG_TEGRA_GMI) += tegra-gmi.o > > obj-$(CONFIG_TI_PWMSS) += ti-pwmss.o > > diff --git a/drivers/soc/canaan/Kconfig b/drivers/soc/canaan/Kconfig > > index 8179b69518b4..853096b7e84c 100644 > > --- a/drivers/soc/canaan/Kconfig > > +++ b/drivers/soc/canaan/Kconfig > > @@ -5,7 +5,6 @@ config SOC_K210_SYSCTL > > depends on RISCV && SOC_CANAAN && OF > > default SOC_CANAAN > > select PM > > - select SIMPLE_PM_BUS > > select SYSCON > > select MFD_SYSCON > > help > > -- > > 2.33.0.153.gba50c8fa24-goog > >
On Sat, 4 Sept 2021 at 02:05, Saravana Kannan <saravanak@google.com> wrote: > > The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to > work with fw_devlink. So, always compile it in for CONFIG_OF and delete > the config since it's no longer necessary. > > Signed-off-by: Saravana Kannan <saravanak@google.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Kind regards Uffe > --- > arch/arm/configs/multi_v7_defconfig | 1 - > arch/arm/configs/oxnas_v6_defconfig | 1 - > arch/arm/configs/shmobile_defconfig | 1 - > arch/arm/mach-omap2/Kconfig | 1 - > arch/arm64/configs/defconfig | 1 - > drivers/bus/Kconfig | 12 ------------ > drivers/bus/Makefile | 2 +- > drivers/soc/canaan/Kconfig | 1 - > 8 files changed, 1 insertion(+), 19 deletions(-) > > diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig > index d9abaae118dd..362720ae8d65 100644 > --- a/arch/arm/configs/multi_v7_defconfig > +++ b/arch/arm/configs/multi_v7_defconfig > @@ -196,7 +196,6 @@ CONFIG_PCI_EPF_TEST=m > CONFIG_DEVTMPFS=y > CONFIG_DEVTMPFS_MOUNT=y > CONFIG_OMAP_OCP2SCP=y > -CONFIG_SIMPLE_PM_BUS=y > CONFIG_MTD=y > CONFIG_MTD_CMDLINE_PARTS=y > CONFIG_MTD_BLOCK=y > diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig > index cae0db6b4eaf..de37f7e90999 100644 > --- a/arch/arm/configs/oxnas_v6_defconfig > +++ b/arch/arm/configs/oxnas_v6_defconfig > @@ -46,7 +46,6 @@ CONFIG_DEVTMPFS=y > CONFIG_DEVTMPFS_MOUNT=y > CONFIG_DMA_CMA=y > CONFIG_CMA_SIZE_MBYTES=64 > -CONFIG_SIMPLE_PM_BUS=y > CONFIG_MTD=y > CONFIG_MTD_CMDLINE_PARTS=y > CONFIG_MTD_BLOCK=y > diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig > index d9a27e4e0914..18d2a960b2d2 100644 > --- a/arch/arm/configs/shmobile_defconfig > +++ b/arch/arm/configs/shmobile_defconfig > @@ -40,7 +40,6 @@ CONFIG_PCI_RCAR_GEN2=y > CONFIG_PCIE_RCAR_HOST=y > CONFIG_DEVTMPFS=y > CONFIG_DEVTMPFS_MOUNT=y > -CONFIG_SIMPLE_PM_BUS=y > CONFIG_MTD=y > CONFIG_MTD_BLOCK=y > CONFIG_MTD_CFI=y > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 7df8f5276ddf..02f2f3157f07 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -112,7 +112,6 @@ config ARCH_OMAP2PLUS > select PM_GENERIC_DOMAINS > select PM_GENERIC_DOMAINS_OF > select RESET_CONTROLLER > - select SIMPLE_PM_BUS > select SOC_BUS > select TI_SYSC > select OMAP_IRQCHIP > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > index f423d08b9a71..474b1f2e3f06 100644 > --- a/arch/arm64/configs/defconfig > +++ b/arch/arm64/configs/defconfig > @@ -245,7 +245,6 @@ CONFIG_DEVTMPFS_MOUNT=y > CONFIG_FW_LOADER_USER_HELPER=y > CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y > CONFIG_HISILICON_LPC=y > -CONFIG_SIMPLE_PM_BUS=y > CONFIG_FSL_MC_BUS=y > CONFIG_TEGRA_ACONNECT=m > CONFIG_GNSS=m > diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig > index e7f7eee6ee9a..dc3801369488 100644 > --- a/drivers/bus/Kconfig > +++ b/drivers/bus/Kconfig > @@ -141,18 +141,6 @@ config QCOM_EBI2 > Interface 2, which can be used to connect things like NAND Flash, > SRAM, ethernet adapters, FPGAs and LCD displays. > > -config SIMPLE_PM_BUS > - tristate "Simple Power-Managed Bus Driver" > - depends on OF && PM > - help > - Driver for transparent busses that don't need a real driver, but > - where the bus controller is part of a PM domain, or under the control > - of a functional clock, and thus relies on runtime PM for managing > - this PM domain and/or clock. > - An example of such a bus controller is the Renesas Bus State > - Controller (BSC, sometimes called "LBSC within Bus Bridge", or > - "External Bus Interface") as found on several Renesas ARM SoCs. > - > config SUN50I_DE2_BUS > bool "Allwinner A64 DE2 Bus Driver" > default ARM64 > diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile > index 397e35392bff..86aacd36a56d 100644 > --- a/drivers/bus/Makefile > +++ b/drivers/bus/Makefile > @@ -26,7 +26,7 @@ obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o > obj-$(CONFIG_QCOM_EBI2) += qcom-ebi2.o > obj-$(CONFIG_SUN50I_DE2_BUS) += sun50i-de2.o > obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o > -obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o > +obj-$(CONFIG_OF) += simple-pm-bus.o > obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o > obj-$(CONFIG_TEGRA_GMI) += tegra-gmi.o > obj-$(CONFIG_TI_PWMSS) += ti-pwmss.o > diff --git a/drivers/soc/canaan/Kconfig b/drivers/soc/canaan/Kconfig > index 8179b69518b4..853096b7e84c 100644 > --- a/drivers/soc/canaan/Kconfig > +++ b/drivers/soc/canaan/Kconfig > @@ -5,7 +5,6 @@ config SOC_K210_SYSCTL > depends on RISCV && SOC_CANAAN && OF > default SOC_CANAAN > select PM > - select SIMPLE_PM_BUS > select SYSCON > select MFD_SYSCON > help > -- > 2.33.0.153.gba50c8fa24-goog >
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index d9abaae118dd..362720ae8d65 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -196,7 +196,6 @@ CONFIG_PCI_EPF_TEST=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_OMAP_OCP2SCP=y -CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig index cae0db6b4eaf..de37f7e90999 100644 --- a/arch/arm/configs/oxnas_v6_defconfig +++ b/arch/arm/configs/oxnas_v6_defconfig @@ -46,7 +46,6 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 -CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index d9a27e4e0914..18d2a960b2d2 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -40,7 +40,6 @@ CONFIG_PCI_RCAR_GEN2=y CONFIG_PCIE_RCAR_HOST=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 7df8f5276ddf..02f2f3157f07 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -112,7 +112,6 @@ config ARCH_OMAP2PLUS select PM_GENERIC_DOMAINS select PM_GENERIC_DOMAINS_OF select RESET_CONTROLLER - select SIMPLE_PM_BUS select SOC_BUS select TI_SYSC select OMAP_IRQCHIP diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index f423d08b9a71..474b1f2e3f06 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -245,7 +245,6 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_FW_LOADER_USER_HELPER=y CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y CONFIG_HISILICON_LPC=y -CONFIG_SIMPLE_PM_BUS=y CONFIG_FSL_MC_BUS=y CONFIG_TEGRA_ACONNECT=m CONFIG_GNSS=m diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index e7f7eee6ee9a..dc3801369488 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -141,18 +141,6 @@ config QCOM_EBI2 Interface 2, which can be used to connect things like NAND Flash, SRAM, ethernet adapters, FPGAs and LCD displays. -config SIMPLE_PM_BUS - tristate "Simple Power-Managed Bus Driver" - depends on OF && PM - help - Driver for transparent busses that don't need a real driver, but - where the bus controller is part of a PM domain, or under the control - of a functional clock, and thus relies on runtime PM for managing - this PM domain and/or clock. - An example of such a bus controller is the Renesas Bus State - Controller (BSC, sometimes called "LBSC within Bus Bridge", or - "External Bus Interface") as found on several Renesas ARM SoCs. - config SUN50I_DE2_BUS bool "Allwinner A64 DE2 Bus Driver" default ARM64 diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 397e35392bff..86aacd36a56d 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -26,7 +26,7 @@ obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o obj-$(CONFIG_QCOM_EBI2) += qcom-ebi2.o obj-$(CONFIG_SUN50I_DE2_BUS) += sun50i-de2.o obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o -obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o +obj-$(CONFIG_OF) += simple-pm-bus.o obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o obj-$(CONFIG_TEGRA_GMI) += tegra-gmi.o obj-$(CONFIG_TI_PWMSS) += ti-pwmss.o diff --git a/drivers/soc/canaan/Kconfig b/drivers/soc/canaan/Kconfig index 8179b69518b4..853096b7e84c 100644 --- a/drivers/soc/canaan/Kconfig +++ b/drivers/soc/canaan/Kconfig @@ -5,7 +5,6 @@ config SOC_K210_SYSCTL depends on RISCV && SOC_CANAAN && OF default SOC_CANAAN select PM - select SIMPLE_PM_BUS select SYSCON select MFD_SYSCON help
The simple-pm-bus driver is mandatory for CONFIG_OF based platforms to work with fw_devlink. So, always compile it in for CONFIG_OF and delete the config since it's no longer necessary. Signed-off-by: Saravana Kannan <saravanak@google.com> --- arch/arm/configs/multi_v7_defconfig | 1 - arch/arm/configs/oxnas_v6_defconfig | 1 - arch/arm/configs/shmobile_defconfig | 1 - arch/arm/mach-omap2/Kconfig | 1 - arch/arm64/configs/defconfig | 1 - drivers/bus/Kconfig | 12 ------------ drivers/bus/Makefile | 2 +- drivers/soc/canaan/Kconfig | 1 - 8 files changed, 1 insertion(+), 19 deletions(-)