| Message ID | 20210928084949.27939-12-krzysztof.kozlowski@canonical.com (mailing list archive) |
|---|---|
| State | Under Review |
| Headers | show |
| Series | regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema | expand |
On Tue, 28 Sep 2021 10:49:48 +0200, Krzysztof Kozlowski wrote: > The S5M8767 PMIC does not require anymore a safe DVS voltage, if the DVS > GPIO is not enabled. Although previously bindings required providing > this safe DVS voltage, but since commit 04f9f068a619 ("regulator: > s5m8767: Modify parsing method of the voltage table of buck2/3/4") this > was ignored. > > > [...] Applied, thanks! [11/12] ARM: dts: exynos: remove unneeded DVS voltages from PMIC on Arndale commit: 1d775cc371620caa12cb404771edbab944b1caba Best regards,
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index a771542e28b8..3583095fbb2a 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -240,9 +240,6 @@ pmic@66 { vinl8-supply = <&buck8_reg>; vinl9-supply = <&buck8_reg>; - s5m8767,pmic-buck2-dvs-voltage = <1300000>; - s5m8767,pmic-buck3-dvs-voltage = <1100000>; - s5m8767,pmic-buck4-dvs-voltage = <1200000>; s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>, <&gpd1 1 GPIO_ACTIVE_HIGH>, <&gpd1 2 GPIO_ACTIVE_HIGH>;
The S5M8767 PMIC does not require anymore a safe DVS voltage, if the DVS GPIO is not enabled. Although previously bindings required providing this safe DVS voltage, but since commit 04f9f068a619 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4") this was ignored. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- arch/arm/boot/dts/exynos5250-arndale.dts | 3 --- 1 file changed, 3 deletions(-)