| Message ID | 20210930195237.1521436-2-jaegeuk@kernel.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [1/2] scsi: ufs: retry START_STOP on UNIT_ATTENTION | expand |
On 30/09/2021 22:52, Jaegeuk Kim wrote: > From: Bart Van Assche <bvanassche@google.com> > > Commit aa53f580e67b ("scsi: ufs: Minor adjustments to error handling") > introduced a ufshcd_clear_ua_wluns() call in > ufshcd_err_handling_unprepare(). As explained in detail by Adrian Hunter, > this can trigger a deadlock. Avoid that deadlock by removing the code that > clears the unit attention. This is safe because the only software that > relies on clearing unit attentions is the Android Trusty software and Did you test this? Because AFAIK it won't work for the UFS device WLUN. UAC must also be cleared for the UFS device WLUN otherwise there will be an error in ufshcd_set_dev_pwr_mode(). > because support for handling unit attentions has been added in the Trusty software. > > See also https://lore.kernel.org/linux-scsi/20210930124224.114031-2-adrian.hunter@intel.com/ > > Cc: Adrian Hunter <adrian.hunter@intel.com> > Fixes: aa53f580e67b ("scsi: ufs: Minor adjustments to error handling") > Signed-off-by: Bart Van Assche <bvanassche@google.com> > Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> > --- > drivers/scsi/ufs/ufshcd.c | 176 +------------------------------------- > drivers/scsi/ufs/ufshcd.h | 3 - > 2 files changed, 1 insertion(+), 178 deletions(-) > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > index 1f21d371e231..4add5e990de9 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -224,7 +224,6 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba); > static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd); > static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag); > static void ufshcd_hba_exit(struct ufs_hba *hba); > -static int ufshcd_clear_ua_wluns(struct ufs_hba *hba); > static int ufshcd_probe_hba(struct ufs_hba *hba, bool async); > static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on); > static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba); > @@ -4109,8 +4108,6 @@ int ufshcd_link_recovery(struct ufs_hba *hba) > if (ret) > dev_err(hba->dev, "%s: link recovery failed, err %d", > __func__, ret); > - else > - ufshcd_clear_ua_wluns(hba); > > return ret; > } > @@ -5974,7 +5971,6 @@ static void ufshcd_err_handling_unprepare(struct ufs_hba *hba) > ufshcd_release(hba); > if (ufshcd_is_clkscaling_supported(hba)) > ufshcd_clk_scaling_suspend(hba, false); > - ufshcd_clear_ua_wluns(hba); > ufshcd_rpm_put(hba); > } > > @@ -7907,8 +7903,6 @@ static int ufshcd_add_lus(struct ufs_hba *hba) > if (ret) > goto out; > > - ufshcd_clear_ua_wluns(hba); > - > /* Initialize devfreq after UFS device is detected */ > if (ufshcd_is_clkscaling_supported(hba)) { > memcpy(&hba->clk_scaling.saved_pwr_info.info, > @@ -7934,116 +7928,6 @@ static int ufshcd_add_lus(struct ufs_hba *hba) > return ret; > } > > -static void ufshcd_request_sense_done(struct request *rq, blk_status_t error) > -{ > - if (error != BLK_STS_OK) > - pr_err("%s: REQUEST SENSE failed (%d)\n", __func__, error); > - kfree(rq->end_io_data); > - blk_put_request(rq); > -} > - > -static int > -ufshcd_request_sense_async(struct ufs_hba *hba, struct scsi_device *sdev) > -{ > - /* > - * Some UFS devices clear unit attention condition only if the sense > - * size used (UFS_SENSE_SIZE in this case) is non-zero. > - */ > - static const u8 cmd[6] = {REQUEST_SENSE, 0, 0, 0, UFS_SENSE_SIZE, 0}; > - struct scsi_request *rq; > - struct request *req; > - char *buffer; > - int ret; > - > - buffer = kzalloc(UFS_SENSE_SIZE, GFP_KERNEL); > - if (!buffer) > - return -ENOMEM; > - > - req = blk_get_request(sdev->request_queue, REQ_OP_DRV_IN, > - /*flags=*/BLK_MQ_REQ_PM); > - if (IS_ERR(req)) { > - ret = PTR_ERR(req); > - goto out_free; > - } > - > - ret = blk_rq_map_kern(sdev->request_queue, req, > - buffer, UFS_SENSE_SIZE, GFP_NOIO); > - if (ret) > - goto out_put; > - > - rq = scsi_req(req); > - rq->cmd_len = ARRAY_SIZE(cmd); > - memcpy(rq->cmd, cmd, rq->cmd_len); > - rq->retries = 3; > - req->timeout = 1 * HZ; > - req->rq_flags |= RQF_PM | RQF_QUIET; > - req->end_io_data = buffer; > - > - blk_execute_rq_nowait(/*bd_disk=*/NULL, req, /*at_head=*/true, > - ufshcd_request_sense_done); > - return 0; > - > -out_put: > - blk_put_request(req); > -out_free: > - kfree(buffer); > - return ret; > -} > - > -static int ufshcd_clear_ua_wlun(struct ufs_hba *hba, u8 wlun) > -{ > - struct scsi_device *sdp; > - unsigned long flags; > - int ret = 0; > - > - spin_lock_irqsave(hba->host->host_lock, flags); > - if (wlun == UFS_UPIU_UFS_DEVICE_WLUN) > - sdp = hba->sdev_ufs_device; > - else if (wlun == UFS_UPIU_RPMB_WLUN) > - sdp = hba->sdev_rpmb; > - else > - BUG(); > - if (sdp) { > - ret = scsi_device_get(sdp); > - if (!ret && !scsi_device_online(sdp)) { > - ret = -ENODEV; > - scsi_device_put(sdp); > - } > - } else { > - ret = -ENODEV; > - } > - spin_unlock_irqrestore(hba->host->host_lock, flags); > - if (ret) > - goto out_err; > - > - ret = ufshcd_request_sense_async(hba, sdp); > - scsi_device_put(sdp); > -out_err: > - if (ret) > - dev_err(hba->dev, "%s: UAC clear LU=%x ret = %d\n", > - __func__, wlun, ret); > - return ret; > -} > - > -static int ufshcd_clear_ua_wluns(struct ufs_hba *hba) > -{ > - int ret = 0; > - > - if (!hba->wlun_dev_clr_ua) > - goto out; > - > - ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN); > - if (!ret) > - ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN); > - if (!ret) > - hba->wlun_dev_clr_ua = false; > -out: > - if (ret) > - dev_err(hba->dev, "%s: Failed to clear UAC WLUNS ret = %d\n", > - __func__, ret); > - return ret; > -} > - > /** > * ufshcd_probe_hba - probe hba to detect device and initialize it > * @hba: per-adapter instance > @@ -8094,8 +7978,6 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params) > /* UFS device is also active now */ > ufshcd_set_ufs_dev_active(hba); > ufshcd_force_reset_auto_bkops(hba); > - hba->wlun_dev_clr_ua = true; > - hba->wlun_rpmb_clr_ua = true; > > /* Gear up to HS gear if supported */ > if (hba->max_pwr_info.is_valid) { > @@ -8655,8 +8537,6 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba, > * handling context. > */ > hba->host->eh_noresume = 1; > - if (hba->wlun_dev_clr_ua) > - ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN); > > cmd[4] = pwr_mode << 4; > > @@ -9819,49 +9699,6 @@ static struct scsi_driver ufs_dev_wlun_template = { > }, > }; > > -static int ufshcd_rpmb_probe(struct device *dev) > -{ > - return is_rpmb_wlun(to_scsi_device(dev)) ? 0 : -ENODEV; > -} > - > -static inline int ufshcd_clear_rpmb_uac(struct ufs_hba *hba) > -{ > - int ret = 0; > - > - if (!hba->wlun_rpmb_clr_ua) > - return 0; > - ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN); > - if (!ret) > - hba->wlun_rpmb_clr_ua = 0; > - return ret; > -} > - > -#ifdef CONFIG_PM > -static int ufshcd_rpmb_resume(struct device *dev) > -{ > - struct ufs_hba *hba = wlun_dev_to_hba(dev); > - > - if (hba->sdev_rpmb) > - ufshcd_clear_rpmb_uac(hba); > - return 0; > -} > -#endif > - > -static const struct dev_pm_ops ufs_rpmb_pm_ops = { > - SET_RUNTIME_PM_OPS(NULL, ufshcd_rpmb_resume, NULL) > - SET_SYSTEM_SLEEP_PM_OPS(NULL, ufshcd_rpmb_resume) > -}; > - > -/* ufs_rpmb_wlun_template - Describes UFS RPMB WLUN. Used only to send UAC. */ > -static struct scsi_driver ufs_rpmb_wlun_template = { > - .gendrv = { > - .name = "ufs_rpmb_wlun", > - .owner = THIS_MODULE, > - .probe = ufshcd_rpmb_probe, > - .pm = &ufs_rpmb_pm_ops, > - }, > -}; > - > static int __init ufshcd_core_init(void) > { > int ret; > @@ -9870,24 +9707,13 @@ static int __init ufshcd_core_init(void) > > ret = scsi_register_driver(&ufs_dev_wlun_template.gendrv); > if (ret) > - goto debugfs_exit; > - > - ret = scsi_register_driver(&ufs_rpmb_wlun_template.gendrv); > - if (ret) > - goto unregister; > - > - return ret; > -unregister: > - scsi_unregister_driver(&ufs_dev_wlun_template.gendrv); > -debugfs_exit: > - ufs_debugfs_exit(); > + ufs_debugfs_exit(); > return ret; > } > > static void __exit ufshcd_core_exit(void) > { > ufs_debugfs_exit(); > - scsi_unregister_driver(&ufs_rpmb_wlun_template.gendrv); > scsi_unregister_driver(&ufs_dev_wlun_template.gendrv); > } > > diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h > index 52ea6f350b18..b414491a8240 100644 > --- a/drivers/scsi/ufs/ufshcd.h > +++ b/drivers/scsi/ufs/ufshcd.h > @@ -865,9 +865,6 @@ struct ufs_hba { > struct ufs_vreg_info vreg_info; > struct list_head clk_list_head; > > - bool wlun_dev_clr_ua; > - bool wlun_rpmb_clr_ua; > - > /* Number of requests aborts */ > int req_abort_count; > >
On 01/10/2021 07:58, Adrian Hunter wrote: > On 30/09/2021 22:52, Jaegeuk Kim wrote: >> From: Bart Van Assche <bvanassche@google.com> >> >> Commit aa53f580e67b ("scsi: ufs: Minor adjustments to error handling") >> introduced a ufshcd_clear_ua_wluns() call in >> ufshcd_err_handling_unprepare(). As explained in detail by Adrian Hunter, >> this can trigger a deadlock. Avoid that deadlock by removing the code that >> clears the unit attention. This is safe because the only software that >> relies on clearing unit attentions is the Android Trusty software and > > Did you test this? Because AFAIK it won't work for the UFS device WLUN. > > UAC must also be cleared for the UFS device WLUN otherwise there will > be an error in ufshcd_set_dev_pwr_mode(). Ok, I see now you took care of that in patch 1. That's cool, but you you didn't cc me on patch 1. I think people have raised the issue before of being cc'ed on only a part of a patchset - don't know what the conclusion was, but in this case it was not ideal. I would also suggest cc'ing more UFS driver contributors. In any case, I suggest amending the commit message of patch 1 to say why the change is being made, and also in this patch, add to the commit message that it depends on the "retry START_STOP on UNIT_ATTENTION" patch. Finally, there is another thing to change. The reason ufshcd_suspend_prepare() does a runtime resume of sdev_rpmb is because the UAC clear would wait for an async runtime resume, which will never happen during system suspend because the PM workqueue gets frozen. So with the removal of UAC clear, ufshcd_suspend_prepare() and ufshcd_resume_complete() should be updated also, to leave rpmb alone. > >> because support for handling unit attentions has been added in the Trusty software. >> >> See also https://lore.kernel.org/linux-scsi/20210930124224.114031-2-adrian.hunter@intel.com/ >> >> Cc: Adrian Hunter <adrian.hunter@intel.com> >> Fixes: aa53f580e67b ("scsi: ufs: Minor adjustments to error handling") >> Signed-off-by: Bart Van Assche <bvanassche@google.com> >> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> >> --- >> drivers/scsi/ufs/ufshcd.c | 176 +------------------------------------- >> drivers/scsi/ufs/ufshcd.h | 3 - >> 2 files changed, 1 insertion(+), 178 deletions(-) >> >> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c >> index 1f21d371e231..4add5e990de9 100644 >> --- a/drivers/scsi/ufs/ufshcd.c >> +++ b/drivers/scsi/ufs/ufshcd.c >> @@ -224,7 +224,6 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba); >> static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd); >> static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag); >> static void ufshcd_hba_exit(struct ufs_hba *hba); >> -static int ufshcd_clear_ua_wluns(struct ufs_hba *hba); >> static int ufshcd_probe_hba(struct ufs_hba *hba, bool async); >> static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on); >> static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba); >> @@ -4109,8 +4108,6 @@ int ufshcd_link_recovery(struct ufs_hba *hba) >> if (ret) >> dev_err(hba->dev, "%s: link recovery failed, err %d", >> __func__, ret); >> - else >> - ufshcd_clear_ua_wluns(hba); >> >> return ret; >> } >> @@ -5974,7 +5971,6 @@ static void ufshcd_err_handling_unprepare(struct ufs_hba *hba) >> ufshcd_release(hba); >> if (ufshcd_is_clkscaling_supported(hba)) >> ufshcd_clk_scaling_suspend(hba, false); >> - ufshcd_clear_ua_wluns(hba); >> ufshcd_rpm_put(hba); >> } >> >> @@ -7907,8 +7903,6 @@ static int ufshcd_add_lus(struct ufs_hba *hba) >> if (ret) >> goto out; >> >> - ufshcd_clear_ua_wluns(hba); >> - >> /* Initialize devfreq after UFS device is detected */ >> if (ufshcd_is_clkscaling_supported(hba)) { >> memcpy(&hba->clk_scaling.saved_pwr_info.info, >> @@ -7934,116 +7928,6 @@ static int ufshcd_add_lus(struct ufs_hba *hba) >> return ret; >> } >> >> -static void ufshcd_request_sense_done(struct request *rq, blk_status_t error) >> -{ >> - if (error != BLK_STS_OK) >> - pr_err("%s: REQUEST SENSE failed (%d)\n", __func__, error); >> - kfree(rq->end_io_data); >> - blk_put_request(rq); >> -} >> - >> -static int >> -ufshcd_request_sense_async(struct ufs_hba *hba, struct scsi_device *sdev) >> -{ >> - /* >> - * Some UFS devices clear unit attention condition only if the sense >> - * size used (UFS_SENSE_SIZE in this case) is non-zero. >> - */ >> - static const u8 cmd[6] = {REQUEST_SENSE, 0, 0, 0, UFS_SENSE_SIZE, 0}; >> - struct scsi_request *rq; >> - struct request *req; >> - char *buffer; >> - int ret; >> - >> - buffer = kzalloc(UFS_SENSE_SIZE, GFP_KERNEL); >> - if (!buffer) >> - return -ENOMEM; >> - >> - req = blk_get_request(sdev->request_queue, REQ_OP_DRV_IN, >> - /*flags=*/BLK_MQ_REQ_PM); >> - if (IS_ERR(req)) { >> - ret = PTR_ERR(req); >> - goto out_free; >> - } >> - >> - ret = blk_rq_map_kern(sdev->request_queue, req, >> - buffer, UFS_SENSE_SIZE, GFP_NOIO); >> - if (ret) >> - goto out_put; >> - >> - rq = scsi_req(req); >> - rq->cmd_len = ARRAY_SIZE(cmd); >> - memcpy(rq->cmd, cmd, rq->cmd_len); >> - rq->retries = 3; >> - req->timeout = 1 * HZ; >> - req->rq_flags |= RQF_PM | RQF_QUIET; >> - req->end_io_data = buffer; >> - >> - blk_execute_rq_nowait(/*bd_disk=*/NULL, req, /*at_head=*/true, >> - ufshcd_request_sense_done); >> - return 0; >> - >> -out_put: >> - blk_put_request(req); >> -out_free: >> - kfree(buffer); >> - return ret; >> -} >> - >> -static int ufshcd_clear_ua_wlun(struct ufs_hba *hba, u8 wlun) >> -{ >> - struct scsi_device *sdp; >> - unsigned long flags; >> - int ret = 0; >> - >> - spin_lock_irqsave(hba->host->host_lock, flags); >> - if (wlun == UFS_UPIU_UFS_DEVICE_WLUN) >> - sdp = hba->sdev_ufs_device; >> - else if (wlun == UFS_UPIU_RPMB_WLUN) >> - sdp = hba->sdev_rpmb; >> - else >> - BUG(); >> - if (sdp) { >> - ret = scsi_device_get(sdp); >> - if (!ret && !scsi_device_online(sdp)) { >> - ret = -ENODEV; >> - scsi_device_put(sdp); >> - } >> - } else { >> - ret = -ENODEV; >> - } >> - spin_unlock_irqrestore(hba->host->host_lock, flags); >> - if (ret) >> - goto out_err; >> - >> - ret = ufshcd_request_sense_async(hba, sdp); >> - scsi_device_put(sdp); >> -out_err: >> - if (ret) >> - dev_err(hba->dev, "%s: UAC clear LU=%x ret = %d\n", >> - __func__, wlun, ret); >> - return ret; >> -} >> - >> -static int ufshcd_clear_ua_wluns(struct ufs_hba *hba) >> -{ >> - int ret = 0; >> - >> - if (!hba->wlun_dev_clr_ua) >> - goto out; >> - >> - ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN); >> - if (!ret) >> - ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN); >> - if (!ret) >> - hba->wlun_dev_clr_ua = false; >> -out: >> - if (ret) >> - dev_err(hba->dev, "%s: Failed to clear UAC WLUNS ret = %d\n", >> - __func__, ret); >> - return ret; >> -} >> - >> /** >> * ufshcd_probe_hba - probe hba to detect device and initialize it >> * @hba: per-adapter instance >> @@ -8094,8 +7978,6 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params) >> /* UFS device is also active now */ >> ufshcd_set_ufs_dev_active(hba); >> ufshcd_force_reset_auto_bkops(hba); >> - hba->wlun_dev_clr_ua = true; >> - hba->wlun_rpmb_clr_ua = true; >> >> /* Gear up to HS gear if supported */ >> if (hba->max_pwr_info.is_valid) { >> @@ -8655,8 +8537,6 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba, >> * handling context. >> */ >> hba->host->eh_noresume = 1; >> - if (hba->wlun_dev_clr_ua) >> - ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN); >> >> cmd[4] = pwr_mode << 4; >> >> @@ -9819,49 +9699,6 @@ static struct scsi_driver ufs_dev_wlun_template = { >> }, >> }; >> >> -static int ufshcd_rpmb_probe(struct device *dev) >> -{ >> - return is_rpmb_wlun(to_scsi_device(dev)) ? 0 : -ENODEV; >> -} >> - >> -static inline int ufshcd_clear_rpmb_uac(struct ufs_hba *hba) >> -{ >> - int ret = 0; >> - >> - if (!hba->wlun_rpmb_clr_ua) >> - return 0; >> - ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN); >> - if (!ret) >> - hba->wlun_rpmb_clr_ua = 0; >> - return ret; >> -} >> - >> -#ifdef CONFIG_PM >> -static int ufshcd_rpmb_resume(struct device *dev) >> -{ >> - struct ufs_hba *hba = wlun_dev_to_hba(dev); >> - >> - if (hba->sdev_rpmb) >> - ufshcd_clear_rpmb_uac(hba); >> - return 0; >> -} >> -#endif >> - >> -static const struct dev_pm_ops ufs_rpmb_pm_ops = { >> - SET_RUNTIME_PM_OPS(NULL, ufshcd_rpmb_resume, NULL) >> - SET_SYSTEM_SLEEP_PM_OPS(NULL, ufshcd_rpmb_resume) >> -}; >> - >> -/* ufs_rpmb_wlun_template - Describes UFS RPMB WLUN. Used only to send UAC. */ >> -static struct scsi_driver ufs_rpmb_wlun_template = { >> - .gendrv = { >> - .name = "ufs_rpmb_wlun", >> - .owner = THIS_MODULE, >> - .probe = ufshcd_rpmb_probe, >> - .pm = &ufs_rpmb_pm_ops, >> - }, >> -}; >> - >> static int __init ufshcd_core_init(void) >> { >> int ret; >> @@ -9870,24 +9707,13 @@ static int __init ufshcd_core_init(void) >> >> ret = scsi_register_driver(&ufs_dev_wlun_template.gendrv); >> if (ret) >> - goto debugfs_exit; >> - >> - ret = scsi_register_driver(&ufs_rpmb_wlun_template.gendrv); >> - if (ret) >> - goto unregister; >> - >> - return ret; >> -unregister: >> - scsi_unregister_driver(&ufs_dev_wlun_template.gendrv); >> -debugfs_exit: >> - ufs_debugfs_exit(); >> + ufs_debugfs_exit(); >> return ret; >> } >> >> static void __exit ufshcd_core_exit(void) >> { >> ufs_debugfs_exit(); >> - scsi_unregister_driver(&ufs_rpmb_wlun_template.gendrv); >> scsi_unregister_driver(&ufs_dev_wlun_template.gendrv); >> } >> >> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h >> index 52ea6f350b18..b414491a8240 100644 >> --- a/drivers/scsi/ufs/ufshcd.h >> +++ b/drivers/scsi/ufs/ufshcd.h >> @@ -865,9 +865,6 @@ struct ufs_hba { >> struct ufs_vreg_info vreg_info; >> struct list_head clk_list_head; >> >> - bool wlun_dev_clr_ua; >> - bool wlun_rpmb_clr_ua; >> - >> /* Number of requests aborts */ >> int req_abort_count; >> >> >
On 9/30/21 9:58 PM, Adrian Hunter wrote: > On 30/09/2021 22:52, Jaegeuk Kim wrote: >> From: Bart Van Assche <bvanassche@google.com> >> >> Commit aa53f580e67b ("scsi: ufs: Minor adjustments to error handling") >> introduced a ufshcd_clear_ua_wluns() call in >> ufshcd_err_handling_unprepare(). As explained in detail by Adrian Hunter, >> this can trigger a deadlock. Avoid that deadlock by removing the code that >> clears the unit attention. This is safe because the only software that >> relies on clearing unit attentions is the Android Trusty software and > > Did you test this? This patch series has been tested on an Android phone running the latest Trusty software but with runtime power management disabled. Bart.
On 9/30/21 11:52 PM, Adrian Hunter wrote: > Finally, there is another thing to change. The reason > ufshcd_suspend_prepare() does a runtime resume of sdev_rpmb is because the > UAC clear would wait for an async runtime resume, which will never happen > during system suspend because the PM workqueue gets frozen. So with the > removal of UAC clear, ufshcd_suspend_prepare() and ufshcd_resume_complete() > should be updated also, to leave rpmb alone. Is the following change what you have in mind? diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 0a28cc4c09d8..0743f54e55f9 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -9648,10 +9648,6 @@ void ufshcd_resume_complete(struct device *dev) ufshcd_rpm_put(hba); hba->complete_put = false; } - if (hba->rpmb_complete_put) { - ufshcd_rpmb_rpm_put(hba); - hba->rpmb_complete_put = false; - } } EXPORT_SYMBOL_GPL(ufshcd_resume_complete); @@ -9674,10 +9670,6 @@ int ufshcd_suspend_prepare(struct device *dev) } hba->complete_put = true; } - if (hba->sdev_rpmb) { - ufshcd_rpmb_rpm_get_sync(hba); - hba->rpmb_complete_put = true; - } return 0; } EXPORT_SYMBOL_GPL(ufshcd_suspend_prepare); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 86b615023ecb..5ecfcd8cae0a 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -921,7 +921,6 @@ struct ufs_hba { #endif u32 luns_avail; bool complete_put; - bool rpmb_complete_put; }; /* Returns true if clocks can be gated. Otherwise false */ Thanks, Bart.
On 2021-10-01 12:59 p.m., Bart Van Assche wrote: > On 9/30/21 11:52 PM, Adrian Hunter wrote: >> Finally, there is another thing to change. The reason >> ufshcd_suspend_prepare() does a runtime resume of sdev_rpmb is because the >> UAC clear would wait for an async runtime resume, which will never happen >> during system suspend because the PM workqueue gets frozen. So with the >> removal of UAC clear, ufshcd_suspend_prepare() and ufshcd_resume_complete() >> should be updated also, to leave rpmb alone. Somewhat related ... Since there was some confusion among the members of T10 of what precisely the RPM bit meant, in SPC-6 revision (draft), a new "HOT PLUGGABLE" two bit field was introduced into the standard INQUIRY response: Table 151 — HOT PLUGGABLE field Code Description 00b No information is provided regarding whether SCSI target device is hot pluggable. 01b The SCSI target device is designed to be removed from a SCSI domain as a single object (i.e., concurrent removal of the SCSI target ports, logical units, and all other objects contained in that SCSI target device (see SAM-6)) while that SCSI domain continues to operate for all other SCSI target devices, if any, in that SCSI domain. 10b The SCSI target device is not designed to be removed from a SCSI domain while that SCSI domain continues to operate. 11b Reserved That field is bits 5 and 4 of byte 1 of the response. Perhaps we should be adding provision for this new field. Doug Gilbert > > Is the following change what you have in mind? > > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > index 0a28cc4c09d8..0743f54e55f9 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -9648,10 +9648,6 @@ void ufshcd_resume_complete(struct device *dev) > ufshcd_rpm_put(hba); > hba->complete_put = false; > } > - if (hba->rpmb_complete_put) { > - ufshcd_rpmb_rpm_put(hba); > - hba->rpmb_complete_put = false; > - } > } > EXPORT_SYMBOL_GPL(ufshcd_resume_complete); > > @@ -9674,10 +9670,6 @@ int ufshcd_suspend_prepare(struct device *dev) > } > hba->complete_put = true; > } > - if (hba->sdev_rpmb) { > - ufshcd_rpmb_rpm_get_sync(hba); > - hba->rpmb_complete_put = true; > - } > return 0; > } > EXPORT_SYMBOL_GPL(ufshcd_suspend_prepare); > diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h > index 86b615023ecb..5ecfcd8cae0a 100644 > --- a/drivers/scsi/ufs/ufshcd.h > +++ b/drivers/scsi/ufs/ufshcd.h > @@ -921,7 +921,6 @@ struct ufs_hba { > #endif > u32 luns_avail; > bool complete_put; > - bool rpmb_complete_put; > }; > > /* Returns true if clocks can be gated. Otherwise false */ > > > > Thanks, > > Bart.
On 01/10/2021 19:59, Bart Van Assche wrote: > On 9/30/21 11:52 PM, Adrian Hunter wrote: >> Finally, there is another thing to change. The reason >> ufshcd_suspend_prepare() does a runtime resume of sdev_rpmb is because the >> UAC clear would wait for an async runtime resume, which will never happen >> during system suspend because the PM workqueue gets frozen. So with the >> removal of UAC clear, ufshcd_suspend_prepare() and ufshcd_resume_complete() >> should be updated also, to leave rpmb alone. > > Is the following change what you have in mind? Yes, exactly. > > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > index 0a28cc4c09d8..0743f54e55f9 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -9648,10 +9648,6 @@ void ufshcd_resume_complete(struct device *dev) > ufshcd_rpm_put(hba); > hba->complete_put = false; > } > - if (hba->rpmb_complete_put) { > - ufshcd_rpmb_rpm_put(hba); > - hba->rpmb_complete_put = false; > - } > } > EXPORT_SYMBOL_GPL(ufshcd_resume_complete); > > @@ -9674,10 +9670,6 @@ int ufshcd_suspend_prepare(struct device *dev) > } > hba->complete_put = true; > } > - if (hba->sdev_rpmb) { > - ufshcd_rpmb_rpm_get_sync(hba); > - hba->rpmb_complete_put = true; > - } > return 0; > } > EXPORT_SYMBOL_GPL(ufshcd_suspend_prepare); > diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h > index 86b615023ecb..5ecfcd8cae0a 100644 > --- a/drivers/scsi/ufs/ufshcd.h > +++ b/drivers/scsi/ufs/ufshcd.h > @@ -921,7 +921,6 @@ struct ufs_hba { > #endif > u32 luns_avail; > bool complete_put; > - bool rpmb_complete_put; > }; > > /* Returns true if clocks can be gated. Otherwise false */ > > > > Thanks, > > Bart.
On 10/1/21 10:21 AM, Douglas Gilbert wrote: > On 2021-10-01 12:59 p.m., Bart Van Assche wrote: >> On 9/30/21 11:52 PM, Adrian Hunter wrote: >>> Finally, there is another thing to change. The reason >>> ufshcd_suspend_prepare() does a runtime resume of sdev_rpmb is because the >>> UAC clear would wait for an async runtime resume, which will never happen >>> during system suspend because the PM workqueue gets frozen. So with the >>> removal of UAC clear, ufshcd_suspend_prepare() and ufshcd_resume_complete() >>> should be updated also, to leave rpmb alone. > > Somewhat related ... > > Since there was some confusion among the members of T10 of what precisely > the RPM bit meant, in SPC-6 revision (draft), a new "HOT PLUGGABLE" two > bit field was introduced into the standard INQUIRY response: > > Table 151 — HOT PLUGGABLE field > > Code Description > 00b No information is provided regarding whether SCSI target device is hot > pluggable. > 01b The SCSI target device is designed to be removed from a SCSI domain as > a single object (i.e., concurrent removal of the SCSI target ports, > logical units, and all other objects contained in that SCSI target > device (see SAM-6)) while that SCSI domain continues to operate for > all other SCSI target devices, if any, in that SCSI domain. > 10b The SCSI target device is not designed to be removed from a SCSI > domain while that SCSI domain continues to operate. > 11b Reserved > > That field is bits 5 and 4 of byte 1 of the response. > > Perhaps we should be adding provision for this new field. Hi Doug, It is not clear to me how hot-plugging is related to UFS devices? I am not aware of any support for hot-plugging in the UFS driver. RPMB = Replay Protected Memory Block. The definition of RPMB according to Wikipedia is "a means for a system to store data to the specific memory area in an authenticated and replay protected manner, and can only be read and written via successfully authenticated read and write accesses". It is not clear to me how hot-plugging and RPMB are related? What am I missing? Thanks, Bart.
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 1f21d371e231..4add5e990de9 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -224,7 +224,6 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba); static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd); static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag); static void ufshcd_hba_exit(struct ufs_hba *hba); -static int ufshcd_clear_ua_wluns(struct ufs_hba *hba); static int ufshcd_probe_hba(struct ufs_hba *hba, bool async); static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on); static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba); @@ -4109,8 +4108,6 @@ int ufshcd_link_recovery(struct ufs_hba *hba) if (ret) dev_err(hba->dev, "%s: link recovery failed, err %d", __func__, ret); - else - ufshcd_clear_ua_wluns(hba); return ret; } @@ -5974,7 +5971,6 @@ static void ufshcd_err_handling_unprepare(struct ufs_hba *hba) ufshcd_release(hba); if (ufshcd_is_clkscaling_supported(hba)) ufshcd_clk_scaling_suspend(hba, false); - ufshcd_clear_ua_wluns(hba); ufshcd_rpm_put(hba); } @@ -7907,8 +7903,6 @@ static int ufshcd_add_lus(struct ufs_hba *hba) if (ret) goto out; - ufshcd_clear_ua_wluns(hba); - /* Initialize devfreq after UFS device is detected */ if (ufshcd_is_clkscaling_supported(hba)) { memcpy(&hba->clk_scaling.saved_pwr_info.info, @@ -7934,116 +7928,6 @@ static int ufshcd_add_lus(struct ufs_hba *hba) return ret; } -static void ufshcd_request_sense_done(struct request *rq, blk_status_t error) -{ - if (error != BLK_STS_OK) - pr_err("%s: REQUEST SENSE failed (%d)\n", __func__, error); - kfree(rq->end_io_data); - blk_put_request(rq); -} - -static int -ufshcd_request_sense_async(struct ufs_hba *hba, struct scsi_device *sdev) -{ - /* - * Some UFS devices clear unit attention condition only if the sense - * size used (UFS_SENSE_SIZE in this case) is non-zero. - */ - static const u8 cmd[6] = {REQUEST_SENSE, 0, 0, 0, UFS_SENSE_SIZE, 0}; - struct scsi_request *rq; - struct request *req; - char *buffer; - int ret; - - buffer = kzalloc(UFS_SENSE_SIZE, GFP_KERNEL); - if (!buffer) - return -ENOMEM; - - req = blk_get_request(sdev->request_queue, REQ_OP_DRV_IN, - /*flags=*/BLK_MQ_REQ_PM); - if (IS_ERR(req)) { - ret = PTR_ERR(req); - goto out_free; - } - - ret = blk_rq_map_kern(sdev->request_queue, req, - buffer, UFS_SENSE_SIZE, GFP_NOIO); - if (ret) - goto out_put; - - rq = scsi_req(req); - rq->cmd_len = ARRAY_SIZE(cmd); - memcpy(rq->cmd, cmd, rq->cmd_len); - rq->retries = 3; - req->timeout = 1 * HZ; - req->rq_flags |= RQF_PM | RQF_QUIET; - req->end_io_data = buffer; - - blk_execute_rq_nowait(/*bd_disk=*/NULL, req, /*at_head=*/true, - ufshcd_request_sense_done); - return 0; - -out_put: - blk_put_request(req); -out_free: - kfree(buffer); - return ret; -} - -static int ufshcd_clear_ua_wlun(struct ufs_hba *hba, u8 wlun) -{ - struct scsi_device *sdp; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(hba->host->host_lock, flags); - if (wlun == UFS_UPIU_UFS_DEVICE_WLUN) - sdp = hba->sdev_ufs_device; - else if (wlun == UFS_UPIU_RPMB_WLUN) - sdp = hba->sdev_rpmb; - else - BUG(); - if (sdp) { - ret = scsi_device_get(sdp); - if (!ret && !scsi_device_online(sdp)) { - ret = -ENODEV; - scsi_device_put(sdp); - } - } else { - ret = -ENODEV; - } - spin_unlock_irqrestore(hba->host->host_lock, flags); - if (ret) - goto out_err; - - ret = ufshcd_request_sense_async(hba, sdp); - scsi_device_put(sdp); -out_err: - if (ret) - dev_err(hba->dev, "%s: UAC clear LU=%x ret = %d\n", - __func__, wlun, ret); - return ret; -} - -static int ufshcd_clear_ua_wluns(struct ufs_hba *hba) -{ - int ret = 0; - - if (!hba->wlun_dev_clr_ua) - goto out; - - ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN); - if (!ret) - ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN); - if (!ret) - hba->wlun_dev_clr_ua = false; -out: - if (ret) - dev_err(hba->dev, "%s: Failed to clear UAC WLUNS ret = %d\n", - __func__, ret); - return ret; -} - /** * ufshcd_probe_hba - probe hba to detect device and initialize it * @hba: per-adapter instance @@ -8094,8 +7978,6 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params) /* UFS device is also active now */ ufshcd_set_ufs_dev_active(hba); ufshcd_force_reset_auto_bkops(hba); - hba->wlun_dev_clr_ua = true; - hba->wlun_rpmb_clr_ua = true; /* Gear up to HS gear if supported */ if (hba->max_pwr_info.is_valid) { @@ -8655,8 +8537,6 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba, * handling context. */ hba->host->eh_noresume = 1; - if (hba->wlun_dev_clr_ua) - ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN); cmd[4] = pwr_mode << 4; @@ -9819,49 +9699,6 @@ static struct scsi_driver ufs_dev_wlun_template = { }, }; -static int ufshcd_rpmb_probe(struct device *dev) -{ - return is_rpmb_wlun(to_scsi_device(dev)) ? 0 : -ENODEV; -} - -static inline int ufshcd_clear_rpmb_uac(struct ufs_hba *hba) -{ - int ret = 0; - - if (!hba->wlun_rpmb_clr_ua) - return 0; - ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN); - if (!ret) - hba->wlun_rpmb_clr_ua = 0; - return ret; -} - -#ifdef CONFIG_PM -static int ufshcd_rpmb_resume(struct device *dev) -{ - struct ufs_hba *hba = wlun_dev_to_hba(dev); - - if (hba->sdev_rpmb) - ufshcd_clear_rpmb_uac(hba); - return 0; -} -#endif - -static const struct dev_pm_ops ufs_rpmb_pm_ops = { - SET_RUNTIME_PM_OPS(NULL, ufshcd_rpmb_resume, NULL) - SET_SYSTEM_SLEEP_PM_OPS(NULL, ufshcd_rpmb_resume) -}; - -/* ufs_rpmb_wlun_template - Describes UFS RPMB WLUN. Used only to send UAC. */ -static struct scsi_driver ufs_rpmb_wlun_template = { - .gendrv = { - .name = "ufs_rpmb_wlun", - .owner = THIS_MODULE, - .probe = ufshcd_rpmb_probe, - .pm = &ufs_rpmb_pm_ops, - }, -}; - static int __init ufshcd_core_init(void) { int ret; @@ -9870,24 +9707,13 @@ static int __init ufshcd_core_init(void) ret = scsi_register_driver(&ufs_dev_wlun_template.gendrv); if (ret) - goto debugfs_exit; - - ret = scsi_register_driver(&ufs_rpmb_wlun_template.gendrv); - if (ret) - goto unregister; - - return ret; -unregister: - scsi_unregister_driver(&ufs_dev_wlun_template.gendrv); -debugfs_exit: - ufs_debugfs_exit(); + ufs_debugfs_exit(); return ret; } static void __exit ufshcd_core_exit(void) { ufs_debugfs_exit(); - scsi_unregister_driver(&ufs_rpmb_wlun_template.gendrv); scsi_unregister_driver(&ufs_dev_wlun_template.gendrv); } diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 52ea6f350b18..b414491a8240 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -865,9 +865,6 @@ struct ufs_hba { struct ufs_vreg_info vreg_info; struct list_head clk_list_head; - bool wlun_dev_clr_ua; - bool wlun_rpmb_clr_ua; - /* Number of requests aborts */ int req_abort_count;