Message ID | 20210803113134.2262882-3-iwona.winiarska@intel.com (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
Series | Introduce PECI subsystem | expand |
On Tue, Aug 03, 2021 at 01:31:21PM +0200, Iwona Winiarska wrote: > Baseboard management controllers (BMC) often run Linux but are usually > implemented with non-X86 processors. They can use PECI to access package > config space (PCS) registers on the host CPU and since some information, > e.g. figuring out the core count, can be obtained using different > registers on different CPU generations, they need to decode the family > and model. > > The format of Package Identifier PCS register that describes CPUID > information has the same layout as CPUID_1.EAX, so let's allow to reuse > cpuid helpers by making it available for other architectures as well. > > Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> > Reviewed-by: Tony Luck <tony.luck@intel.com> > Reviewed-by: Dan Williams <dan.j.williams@intel.com> > --- > MAINTAINERS | 1 + > arch/x86/Kconfig | 1 + > arch/x86/include/asm/cpu.h | 3 --- > arch/x86/include/asm/microcode.h | 2 +- > arch/x86/kvm/cpuid.h | 3 ++- > arch/x86/lib/Makefile | 2 +- > drivers/edac/mce_amd.c | 3 +-- > include/linux/x86/cpu.h | 9 +++++++++ > lib/Kconfig | 4 ++++ > lib/Makefile | 2 ++ > lib/x86/Makefile | 3 +++ > {arch/x86/lib => lib/x86}/cpu.c | 2 +- > 12 files changed, 26 insertions(+), 9 deletions(-) > create mode 100644 include/linux/x86/cpu.h > create mode 100644 lib/x86/Makefile > rename {arch/x86/lib => lib/x86}/cpu.c (95%) AFAICT, all that churn is done for x86_family() and x86_model() which are used *exactly* *once* and which are almost trivial anyway. What's wrong with simply computing the family and model "by hand", so to speak, in peci_device_info_init() and do away with that diffstat 12 files changed, 26 insertions(+), 9 deletions(-) ?
On Mon, 2021-10-04 at 21:08 +0200, Borislav Petkov wrote: > On Tue, Aug 03, 2021 at 01:31:21PM +0200, Iwona Winiarska wrote: > > Baseboard management controllers (BMC) often run Linux but are usually > > implemented with non-X86 processors. They can use PECI to access package > > config space (PCS) registers on the host CPU and since some information, > > e.g. figuring out the core count, can be obtained using different > > registers on different CPU generations, they need to decode the family > > and model. > > > > The format of Package Identifier PCS register that describes CPUID > > information has the same layout as CPUID_1.EAX, so let's allow to reuse > > cpuid helpers by making it available for other architectures as well. > > > > Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> > > Reviewed-by: Tony Luck <tony.luck@intel.com> > > Reviewed-by: Dan Williams <dan.j.williams@intel.com> > > --- > > MAINTAINERS | 1 + > > arch/x86/Kconfig | 1 + > > arch/x86/include/asm/cpu.h | 3 --- > > arch/x86/include/asm/microcode.h | 2 +- > > arch/x86/kvm/cpuid.h | 3 ++- > > arch/x86/lib/Makefile | 2 +- > > drivers/edac/mce_amd.c | 3 +-- > > include/linux/x86/cpu.h | 9 +++++++++ > > lib/Kconfig | 4 ++++ > > lib/Makefile | 2 ++ > > lib/x86/Makefile | 3 +++ > > {arch/x86/lib => lib/x86}/cpu.c | 2 +- > > 12 files changed, 26 insertions(+), 9 deletions(-) > > create mode 100644 include/linux/x86/cpu.h > > create mode 100644 lib/x86/Makefile > > rename {arch/x86/lib => lib/x86}/cpu.c (95%) > > AFAICT, all that churn is done for x86_family() and x86_model() which > are used *exactly* *once* and which are almost trivial anyway. Correct. > What's wrong with simply computing the family and model "by hand", so to > speak, in peci_device_info_init() and do away with that diffstat > > 12 files changed, 26 insertions(+), 9 deletions(-) > > ? Nothing wrong - just a trade-off between churn and keeping things tidy and not duplicated, similar to patch 1. And just like in patch 1, if you have a strong opinion against it - we can duplicate. Thanks -Iwona
diff --git a/MAINTAINERS b/MAINTAINERS index 104773d40952..7cdab7229651 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20107,6 +20107,7 @@ F: Documentation/devicetree/bindings/x86/ F: Documentation/x86/ F: arch/x86/ F: include/linux/x86/ +F: lib/x86/ X86 ENTRY CODE M: Andy Lutomirski <luto@kernel.org> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 88fb922c23a0..9096593999ba 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -141,6 +141,7 @@ config X86 select GENERIC_IRQ_PROBE select GENERIC_IRQ_RESERVATION_MODE select GENERIC_IRQ_SHOW + select GENERIC_LIB_X86 select GENERIC_PENDING_IRQ if SMP select GENERIC_PTDUMP select GENERIC_SMP_IDLE_THREAD diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h index 33d41e350c79..2a663a05a795 100644 --- a/arch/x86/include/asm/cpu.h +++ b/arch/x86/include/asm/cpu.h @@ -37,9 +37,6 @@ extern int _debug_hotplug_cpu(int cpu, int action); int mwait_usable(const struct cpuinfo_x86 *); -unsigned int x86_family(unsigned int sig); -unsigned int x86_model(unsigned int sig); -unsigned int x86_stepping(unsigned int sig); #ifdef CONFIG_CPU_SUP_INTEL extern void __init sld_setup(struct cpuinfo_x86 *c); extern void switch_to_sld(unsigned long tifn); diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h index ab45a220fac4..4b0eabf63b98 100644 --- a/arch/x86/include/asm/microcode.h +++ b/arch/x86/include/asm/microcode.h @@ -2,9 +2,9 @@ #ifndef _ASM_X86_MICROCODE_H #define _ASM_X86_MICROCODE_H -#include <asm/cpu.h> #include <linux/earlycpio.h> #include <linux/initrd.h> +#include <linux/x86/cpu.h> struct ucode_patch { struct list_head plist; diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h index c99edfff7f82..bf070d2a2175 100644 --- a/arch/x86/kvm/cpuid.h +++ b/arch/x86/kvm/cpuid.h @@ -4,10 +4,11 @@ #include "x86.h" #include "reverse_cpuid.h" -#include <asm/cpu.h> #include <asm/processor.h> #include <uapi/asm/kvm_para.h> +#include <linux/x86/cpu.h> + extern u32 kvm_cpu_caps[NR_KVM_CPU_CAPS] __read_mostly; void kvm_set_cpu_caps(void); diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index bad4dee4f0e4..fd73c1b72c3e 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -41,7 +41,7 @@ clean-files := inat-tables.c obj-$(CONFIG_SMP) += msr-smp.o cache-smp.o -lib-y := delay.o misc.o cmdline.o cpu.o +lib-y := delay.o misc.o cmdline.o lib-y += usercopy_$(BITS).o usercopy.o getuser.o putuser.o lib-y += memcpy_$(BITS).o lib-$(CONFIG_ARCH_HAS_COPY_MC) += copy_mc.o copy_mc_64.o diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c index 27d56920b469..f545f5fad02c 100644 --- a/drivers/edac/mce_amd.c +++ b/drivers/edac/mce_amd.c @@ -1,8 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only #include <linux/module.h> #include <linux/slab.h> - -#include <asm/cpu.h> +#include <linux/x86/cpu.h> #include "mce_amd.h" diff --git a/include/linux/x86/cpu.h b/include/linux/x86/cpu.h new file mode 100644 index 000000000000..5f383d47886d --- /dev/null +++ b/include/linux/x86/cpu.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef _LINUX_X86_CPU_H +#define _LINUX_X86_CPU_H + +unsigned int x86_family(unsigned int sig); +unsigned int x86_model(unsigned int sig); +unsigned int x86_stepping(unsigned int sig); + +#endif /* _LINUX_X86_CPU_H */ diff --git a/lib/Kconfig b/lib/Kconfig index 5c9c0687f76d..e538d4d773bd 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -715,3 +715,7 @@ config PLDMFW config ASN1_ENCODER tristate + +config GENERIC_LIB_X86 + bool + depends on X86 diff --git a/lib/Makefile b/lib/Makefile index 5efd1b435a37..befbd9413432 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -360,3 +360,5 @@ obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o + +obj-$(CONFIG_GENERIC_LIB_X86) += x86/ diff --git a/lib/x86/Makefile b/lib/x86/Makefile new file mode 100644 index 000000000000..342024c272fc --- /dev/null +++ b/lib/x86/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-y := cpu.o diff --git a/arch/x86/lib/cpu.c b/lib/x86/cpu.c similarity index 95% rename from arch/x86/lib/cpu.c rename to lib/x86/cpu.c index 7ad68917a51e..17af59a2fddf 100644 --- a/arch/x86/lib/cpu.c +++ b/lib/x86/cpu.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only #include <linux/types.h> #include <linux/export.h> -#include <asm/cpu.h> +#include <linux/x86/cpu.h> unsigned int x86_family(unsigned int sig) {