| Message ID | 20211010084245.9091-1-david@ixit.cz (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v5] dt-bindings: drm/msm/gpu: convert to YAML | expand |
On Sun, Oct 10, 2021 at 10:42:45AM +0200, David Heidelberg wrote: > Conversion of text binding for Adreno GPU to the YAML format. Blank line needed. > Signed-off-by: David Heidelberg <david@ixit.cz> > --- > v2: > - added compatbile description from Rob Clark > - dropped reg description > - reg numbers increased to 3 (since we also have uncommon cx_dbgc) > - specified interconnect-names items range > - defined zap-shader as an object and added it's properties > - enforce 0 clocks for Andreno >= 6xx since it's defined in GMU node > > v3: > - fix patterns (add backslash before dot) > - add additional clocks > - adreno@ -> gpu@ > - add few const and change enum to anyOf > - added clock & clock-names placeholder in non-conditional part > (description) > > v4: > - clock & clock-names - true,false instead maxItems > - impl. #stream-id-cells, nvmem-cell-names, nvmem-cells > - dropped requirement on firmware-name in zap_shader > > v5: > - maxOtems -> maxItems typo fix > .../devicetree/bindings/display/msm/gpu.txt | 157 --------- > .../devicetree/bindings/display/msm/gpu.yaml | 302 ++++++++++++++++++ > 2 files changed, 302 insertions(+), 157 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/display/msm/gpu.txt > create mode 100644 Documentation/devicetree/bindings/display/msm/gpu.yaml > > diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt > deleted file mode 100644 > index 090dcb3fc34d..000000000000 > --- a/Documentation/devicetree/bindings/display/msm/gpu.txt > +++ /dev/null > @@ -1,157 +0,0 @@ > -Qualcomm adreno/snapdragon GPU > - > -Required properties: > -- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or > - "amd,imageon-XYZ.W", "amd,imageon" > - for example: "qcom,adreno-306.0", "qcom,adreno" > - Note that you need to list the less specific "qcom,adreno" (since this > - is what the device is matched on), in addition to the more specific > - with the chip-id. > - If "amd,imageon" is used, there should be no top level msm device. > -- reg: Physical base address and length of the controller's registers. > -- interrupts: The interrupt signal from the gpu. > -- clocks: device clocks (if applicable) > - See ../clocks/clock-bindings.txt for details. > -- clock-names: the following clocks are required by a3xx, a4xx and a5xx > - cores: > - * "core" > - * "iface" > - * "mem_iface" > - For GMU attached devices the GPU clocks are not used and are not required. The > - following devices should not list clocks: > - - qcom,adreno-630.2 > -- iommus: optional phandle to an adreno iommu instance > -- operating-points-v2: optional phandle to the OPP operating points > -- interconnects: optional phandle to an interconnect provider. See > - ../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms > - will have two paths; all others will have one path. > -- interconnect-names: The names of the interconnect paths that correspond to the > - interconnects property. Values must be gfx-mem and ocmem. > -- qcom,gmu: For GMU attached devices a phandle to the GMU device that will > - control the power for the GPU. Applicable targets: > - - qcom,adreno-630.2 > -- zap-shader: For a5xx and a6xx devices this node contains a memory-region that > - points to reserved memory to store the zap shader that can be used to help > - bring the GPU out of secure mode. > -- firmware-name: optional property of the 'zap-shader' node, listing the > - relative path of the device specific zap firmware. > -- sram: phandle to the On Chip Memory (OCMEM) that's present on some a3xx and > - a4xx Snapdragon SoCs. See > - Documentation/devicetree/bindings/sram/qcom,ocmem.yaml. > - > -Optional properties: > -- #cooling-cells: The value must be 2. For details, please refer > - Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml. > - > -Example 3xx/4xx: > - > -/ { > - ... > - > - gpu: adreno@fdb00000 { > - compatible = "qcom,adreno-330.2", > - "qcom,adreno"; > - reg = <0xfdb00000 0x10000>; > - reg-names = "kgsl_3d0_reg_memory"; > - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "kgsl_3d0_irq"; > - clock-names = "core", > - "iface", > - "mem_iface"; > - clocks = <&mmcc OXILI_GFX3D_CLK>, > - <&mmcc OXILICX_AHB_CLK>, > - <&mmcc OXILICX_AXI_CLK>; > - sram = <&gpu_sram>; > - power-domains = <&mmcc OXILICX_GDSC>; > - operating-points-v2 = <&gpu_opp_table>; > - iommus = <&gpu_iommu 0>; > - #cooling-cells = <2>; > - }; > - > - gpu_sram: ocmem@fdd00000 { > - compatible = "qcom,msm8974-ocmem"; > - > - reg = <0xfdd00000 0x2000>, > - <0xfec00000 0x180000>; > - reg-names = "ctrl", > - "mem"; > - > - clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, > - <&mmcc OCMEMCX_OCMEMNOC_CLK>; > - clock-names = "core", > - "iface"; > - > - #address-cells = <1>; > - #size-cells = <1>; > - > - gpu_sram: gpu-sram@0 { > - reg = <0x0 0x100000>; > - ranges = <0 0 0xfec00000 0x100000>; > - }; > - }; > -}; > - > -Example a6xx (with GMU): > - > -/ { > - ... > - > - gpu@5000000 { > - compatible = "qcom,adreno-630.2", "qcom,adreno"; > - #stream-id-cells = <16>; > - > - reg = <0x5000000 0x40000>, <0x509e000 0x10>; > - reg-names = "kgsl_3d0_reg_memory", "cx_mem"; > - > - #cooling-cells = <2>; > - > - /* > - * Look ma, no clocks! The GPU clocks and power are > - * controlled entirely by the GMU > - */ > - > - interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; > - > - iommus = <&adreno_smmu 0>; > - > - operating-points-v2 = <&gpu_opp_table>; > - > - interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; > - interconnect-names = "gfx-mem"; > - > - gpu_opp_table: opp-table { > - compatible = "operating-points-v2"; > - > - opp-430000000 { > - opp-hz = /bits/ 64 <430000000>; > - opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; > - opp-peak-kBps = <5412000>; > - }; > - > - opp-355000000 { > - opp-hz = /bits/ 64 <355000000>; > - opp-level = <RPMH_REGULATOR_LEVEL_SVS>; > - opp-peak-kBps = <3072000>; > - }; > - > - opp-267000000 { > - opp-hz = /bits/ 64 <267000000>; > - opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; > - opp-peak-kBps = <3072000>; > - }; > - > - opp-180000000 { > - opp-hz = /bits/ 64 <180000000>; > - opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; > - opp-peak-kBps = <1804000>; > - }; > - }; > - > - qcom,gmu = <&gmu>; > - > - zap-shader { > - memory-region = <&zap_shader_region>; > - firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn" > - }; > - }; > -}; > diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml > new file mode 100644 > index 000000000000..544e7568a35e > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml > @@ -0,0 +1,302 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > + > +$id: "http://devicetree.org/schemas/display/msm/gpu.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Devicetree bindings for the Adreno or Snapdragon GPUs > + > +maintainers: > + - Rob Clark <robdclark@gmail.com> > + > +properties: > + compatible: > + oneOf: > + - description: | > + The driver is parsing the compat string for Adreno to > + figure out the gpu-id and patch level. > + items: > + - pattern: '^qcom,adreno-[3-6][0-9][0-9]\.[0-9]$' > + - const: qcom,adreno > + - description: | > + The driver is parsing the compat string for Imageon to > + figure out the gpu-id and patch level. > + items: > + - pattern: '^amd,imageon-200\.[0-1]$' > + - const: amd,imageon > + > + clocks: true > + > + clock-names: true > + > + reg: > + minItems: 1 > + maxItems: 3 > + > + reg-names: > + minItems: 1 > + maxItems: 3 > + items: > + enum: > + - kgsl_3d0_reg_memory > + - cx_mem > + - cx_dbgc Based on the in tree dts files, can't you define the order: items: - const: kgsl_3d0_reg_memory - const: cx_mem - const: cx_dbgc > + > + interrupts: > + maxItems: 1 > + > + interrupt-names: > + maxItems: 1 > + > + interconnects: > + minItems: 1 > + maxItems: 2 > + description: | > + Optional phandle to an interconnect provider. See > + ../interconnect/interconnect.txt for details. Drop generic description. > + Some A3xx and all A4xx platforms will have two paths; > + all others will have one path. > + > + interconnect-names: > + minItems: 1 > + maxItems: 2 > + items: > + enum: > + - gfx-mem > + - ocmem Order? > + description: | > + the names of the interconnect paths that correspond to > + the interconnects property Drop. That's every 'interconnect-names'. > + > + iommus: > + maxItems: 1 > + > + sram: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + minItems: 1 > + maxItems: 4 > + description: | > + phandles to one or more reserved on-chip SRAM regions. > + phandle to the On Chip Memory (OCMEM) that's present on some a3xx and > + a4xx Snapdragon SoCs. See > + Documentation/devicetree/bindings/sram/qcom,ocmem.yaml > + > + operating-points-v2: true > + opp-table: true type: object > + > + power-domains: > + maxItems: 1 > + > + zap-shader: > + type: object > + description: | > + For a5xx and a6xx devices this node contains a memory-region that > + points to reserved memory to store the zap shader that can be used to > + help bring the GPU out of secure mode. > + properties: > + memory-region: > + $ref: /schemas/types.yaml#/definitions/phandle > + > + firmware-name: > + description: | > + Default name of the firmware to load to the remote processor. > + > + "#cooling-cells": > + const: 2 > + > + "#stream-id-cells": Not documented before. Downstream IOMMU binding?? > + const: 16 > + > + nvmem-cell-names: > + maxItems: 1 > + > + nvmem-cells: > + description: efuse registers > + maxItems: 1 > + > + qcom,gmu: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: | > + For GMU attached devices a phandle to the GMU device that will > + control the power for the GPU. > + > + > +required: > + - compatible > + - reg > + - interrupts > + > +additionalProperties: false > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$' > + > + then: > + properties: > + clocks: > + minItems: 2 > + maxItems: 7 > + > + clock-names: > + items: > + anyOf: > + - const: core > + description: GPU Core clock > + - const: iface > + description: GPU Interface clock > + - const: mem > + description: GPU Memory clock > + - const: mem_iface > + description: GPU Memory Interface clock > + - const: alt_mem_iface > + description: GPU Alternative Memory Interface clock > + - const: gfx3d > + description: GPU 3D engine clock > + - const: rbbmtimer > + description: GPU RBBM Timer for Adreno 5xx series > + minItems: 2 > + maxItems: 7 > + > + required: > + - clocks > + - clock-names > + - if: > + properties: > + compatible: > + contains: > + pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$' > + > + then: # Since Adreno 6xx series clocks should be defined in GMU > + properties: > + clocks: false > + clock-names: false > + > +examples: > + - | > + > + // Example a3xx/4xx: > + > + #include <dt-bindings/clock/qcom,mmcc-msm8974.h> > + #include <dt-bindings/clock/qcom,rpmcc.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + gpu: gpu@fdb00000 { > + compatible = "qcom,adreno-330.2", "qcom,adreno"; > + > + reg = <0xfdb00000 0x10000>; > + reg-names = "kgsl_3d0_reg_memory"; > + > + clock-names = "core", "iface", "mem_iface"; > + clocks = <&mmcc OXILI_GFX3D_CLK>, > + <&mmcc OXILICX_AHB_CLK>, > + <&mmcc OXILICX_AXI_CLK>; > + > + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "kgsl_3d0_irq"; > + > + sram = <&gpu_sram>; > + power-domains = <&mmcc OXILICX_GDSC>; > + operating-points-v2 = <&gpu_opp_table>; > + iommus = <&gpu_iommu 0>; > + #cooling-cells = <2>; > + }; > + > + ocmem@fdd00000 { > + compatible = "qcom,msm8974-ocmem"; > + > + reg = <0xfdd00000 0x2000>, > + <0xfec00000 0x180000>; > + reg-names = "ctrl", "mem"; > + > + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, > + <&mmcc OCMEMCX_OCMEMNOC_CLK>; > + clock-names = "core", "iface"; > + > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0xfec00000 0x100000>; > + > + gpu_sram: gpu-sram@0 { > + reg = <0x0 0x100000>; > + }; > + }; > + - | > + > + // Example a6xx (with GMU): > + > + #include <dt-bindings/clock/qcom,gpucc-sdm845.h> > + #include <dt-bindings/clock/qcom,gcc-sdm845.h> > + #include <dt-bindings/power/qcom-rpmpd.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interconnect/qcom,sdm845.h> > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + > + zap_shader_region: gpu@8f200000 { > + compatible = "shared-dma-pool"; > + reg = <0x0 0x90b00000 0x0 0xa00000>; > + no-map; > + }; > + }; > + > + gpu@5000000 { > + compatible = "qcom,adreno-630.2", "qcom,adreno"; > + > + reg = <0x5000000 0x40000>, <0x509e000 0x10>; > + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; > + > + #cooling-cells = <2>; > + > + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; > + > + iommus = <&adreno_smmu 0>; > + > + operating-points-v2 = <&gpu_opp_table>; > + > + interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; > + interconnect-names = "gfx-mem"; > + > + qcom,gmu = <&gmu>; > + > + gpu_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-430000000 { > + opp-hz = /bits/ 64 <430000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; > + opp-peak-kBps = <5412000>; > + }; > + > + opp-355000000 { > + opp-hz = /bits/ 64 <355000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; > + opp-peak-kBps = <3072000>; > + }; > + > + opp-267000000 { > + opp-hz = /bits/ 64 <267000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; > + opp-peak-kBps = <3072000>; > + }; > + > + opp-180000000 { > + opp-hz = /bits/ 64 <180000000>; > + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; > + opp-peak-kBps = <1804000>; > + }; > + }; > + > + zap-shader { > + memory-region = <&zap_shader_region>; > + firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"; > + }; > + }; > -- > 2.33.0 > >
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt deleted file mode 100644 index 090dcb3fc34d..000000000000 --- a/Documentation/devicetree/bindings/display/msm/gpu.txt +++ /dev/null @@ -1,157 +0,0 @@ -Qualcomm adreno/snapdragon GPU - -Required properties: -- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or - "amd,imageon-XYZ.W", "amd,imageon" - for example: "qcom,adreno-306.0", "qcom,adreno" - Note that you need to list the less specific "qcom,adreno" (since this - is what the device is matched on), in addition to the more specific - with the chip-id. - If "amd,imageon" is used, there should be no top level msm device. -- reg: Physical base address and length of the controller's registers. -- interrupts: The interrupt signal from the gpu. -- clocks: device clocks (if applicable) - See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required by a3xx, a4xx and a5xx - cores: - * "core" - * "iface" - * "mem_iface" - For GMU attached devices the GPU clocks are not used and are not required. The - following devices should not list clocks: - - qcom,adreno-630.2 -- iommus: optional phandle to an adreno iommu instance -- operating-points-v2: optional phandle to the OPP operating points -- interconnects: optional phandle to an interconnect provider. See - ../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms - will have two paths; all others will have one path. -- interconnect-names: The names of the interconnect paths that correspond to the - interconnects property. Values must be gfx-mem and ocmem. -- qcom,gmu: For GMU attached devices a phandle to the GMU device that will - control the power for the GPU. Applicable targets: - - qcom,adreno-630.2 -- zap-shader: For a5xx and a6xx devices this node contains a memory-region that - points to reserved memory to store the zap shader that can be used to help - bring the GPU out of secure mode. -- firmware-name: optional property of the 'zap-shader' node, listing the - relative path of the device specific zap firmware. -- sram: phandle to the On Chip Memory (OCMEM) that's present on some a3xx and - a4xx Snapdragon SoCs. See - Documentation/devicetree/bindings/sram/qcom,ocmem.yaml. - -Optional properties: -- #cooling-cells: The value must be 2. For details, please refer - Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml. - -Example 3xx/4xx: - -/ { - ... - - gpu: adreno@fdb00000 { - compatible = "qcom,adreno-330.2", - "qcom,adreno"; - reg = <0xfdb00000 0x10000>; - reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "kgsl_3d0_irq"; - clock-names = "core", - "iface", - "mem_iface"; - clocks = <&mmcc OXILI_GFX3D_CLK>, - <&mmcc OXILICX_AHB_CLK>, - <&mmcc OXILICX_AXI_CLK>; - sram = <&gpu_sram>; - power-domains = <&mmcc OXILICX_GDSC>; - operating-points-v2 = <&gpu_opp_table>; - iommus = <&gpu_iommu 0>; - #cooling-cells = <2>; - }; - - gpu_sram: ocmem@fdd00000 { - compatible = "qcom,msm8974-ocmem"; - - reg = <0xfdd00000 0x2000>, - <0xfec00000 0x180000>; - reg-names = "ctrl", - "mem"; - - clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&mmcc OCMEMCX_OCMEMNOC_CLK>; - clock-names = "core", - "iface"; - - #address-cells = <1>; - #size-cells = <1>; - - gpu_sram: gpu-sram@0 { - reg = <0x0 0x100000>; - ranges = <0 0 0xfec00000 0x100000>; - }; - }; -}; - -Example a6xx (with GMU): - -/ { - ... - - gpu@5000000 { - compatible = "qcom,adreno-630.2", "qcom,adreno"; - #stream-id-cells = <16>; - - reg = <0x5000000 0x40000>, <0x509e000 0x10>; - reg-names = "kgsl_3d0_reg_memory", "cx_mem"; - - #cooling-cells = <2>; - - /* - * Look ma, no clocks! The GPU clocks and power are - * controlled entirely by the GMU - */ - - interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; - - iommus = <&adreno_smmu 0>; - - operating-points-v2 = <&gpu_opp_table>; - - interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; - interconnect-names = "gfx-mem"; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-430000000 { - opp-hz = /bits/ 64 <430000000>; - opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; - opp-peak-kBps = <5412000>; - }; - - opp-355000000 { - opp-hz = /bits/ 64 <355000000>; - opp-level = <RPMH_REGULATOR_LEVEL_SVS>; - opp-peak-kBps = <3072000>; - }; - - opp-267000000 { - opp-hz = /bits/ 64 <267000000>; - opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; - opp-peak-kBps = <3072000>; - }; - - opp-180000000 { - opp-hz = /bits/ 64 <180000000>; - opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; - opp-peak-kBps = <1804000>; - }; - }; - - qcom,gmu = <&gmu>; - - zap-shader { - memory-region = <&zap_shader_region>; - firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn" - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml new file mode 100644 index 000000000000..544e7568a35e --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -0,0 +1,302 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: "http://devicetree.org/schemas/display/msm/gpu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Devicetree bindings for the Adreno or Snapdragon GPUs + +maintainers: + - Rob Clark <robdclark@gmail.com> + +properties: + compatible: + oneOf: + - description: | + The driver is parsing the compat string for Adreno to + figure out the gpu-id and patch level. + items: + - pattern: '^qcom,adreno-[3-6][0-9][0-9]\.[0-9]$' + - const: qcom,adreno + - description: | + The driver is parsing the compat string for Imageon to + figure out the gpu-id and patch level. + items: + - pattern: '^amd,imageon-200\.[0-1]$' + - const: amd,imageon + + clocks: true + + clock-names: true + + reg: + minItems: 1 + maxItems: 3 + + reg-names: + minItems: 1 + maxItems: 3 + items: + enum: + - kgsl_3d0_reg_memory + - cx_mem + - cx_dbgc + + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + + interconnects: + minItems: 1 + maxItems: 2 + description: | + Optional phandle to an interconnect provider. See + ../interconnect/interconnect.txt for details. + Some A3xx and all A4xx platforms will have two paths; + all others will have one path. + + interconnect-names: + minItems: 1 + maxItems: 2 + items: + enum: + - gfx-mem + - ocmem + description: | + the names of the interconnect paths that correspond to + the interconnects property + + iommus: + maxItems: 1 + + sram: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 4 + description: | + phandles to one or more reserved on-chip SRAM regions. + phandle to the On Chip Memory (OCMEM) that's present on some a3xx and + a4xx Snapdragon SoCs. See + Documentation/devicetree/bindings/sram/qcom,ocmem.yaml + + operating-points-v2: true + opp-table: true + + power-domains: + maxItems: 1 + + zap-shader: + type: object + description: | + For a5xx and a6xx devices this node contains a memory-region that + points to reserved memory to store the zap shader that can be used to + help bring the GPU out of secure mode. + properties: + memory-region: + $ref: /schemas/types.yaml#/definitions/phandle + + firmware-name: + description: | + Default name of the firmware to load to the remote processor. + + "#cooling-cells": + const: 2 + + "#stream-id-cells": + const: 16 + + nvmem-cell-names: + maxItems: 1 + + nvmem-cells: + description: efuse registers + maxItems: 1 + + qcom,gmu: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + For GMU attached devices a phandle to the GMU device that will + control the power for the GPU. + + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$' + + then: + properties: + clocks: + minItems: 2 + maxItems: 7 + + clock-names: + items: + anyOf: + - const: core + description: GPU Core clock + - const: iface + description: GPU Interface clock + - const: mem + description: GPU Memory clock + - const: mem_iface + description: GPU Memory Interface clock + - const: alt_mem_iface + description: GPU Alternative Memory Interface clock + - const: gfx3d + description: GPU 3D engine clock + - const: rbbmtimer + description: GPU RBBM Timer for Adreno 5xx series + minItems: 2 + maxItems: 7 + + required: + - clocks + - clock-names + - if: + properties: + compatible: + contains: + pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$' + + then: # Since Adreno 6xx series clocks should be defined in GMU + properties: + clocks: false + clock-names: false + +examples: + - | + + // Example a3xx/4xx: + + #include <dt-bindings/clock/qcom,mmcc-msm8974.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gpu: gpu@fdb00000 { + compatible = "qcom,adreno-330.2", "qcom,adreno"; + + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + clock-names = "core", "iface", "mem_iface"; + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + sram = <&gpu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + iommus = <&gpu_iommu 0>; + #cooling-cells = <2>; + }; + + ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", "mem"; + + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfec00000 0x100000>; + + gpu_sram: gpu-sram@0 { + reg = <0x0 0x100000>; + }; + }; + - | + + // Example a6xx (with GMU): + + #include <dt-bindings/clock/qcom,gpucc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,sdm845.h> + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + zap_shader_region: gpu@8f200000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90b00000 0x0 0xa00000>; + no-map; + }; + }; + + gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + + reg = <0x5000000 0x40000>, <0x509e000 0x10>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; + + #cooling-cells = <2>; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; + interconnect-names = "gfx-mem"; + + qcom,gmu = <&gmu>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <5412000>; + }; + + opp-355000000 { + opp-hz = /bits/ 64 <355000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <3072000>; + }; + + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <3072000>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + opp-peak-kBps = <1804000>; + }; + }; + + zap-shader { + memory-region = <&zap_shader_region>; + firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"; + }; + };
Conversion of text binding for Adreno GPU to the YAML format. Signed-off-by: David Heidelberg <david@ixit.cz> --- v2: - added compatbile description from Rob Clark - dropped reg description - reg numbers increased to 3 (since we also have uncommon cx_dbgc) - specified interconnect-names items range - defined zap-shader as an object and added it's properties - enforce 0 clocks for Andreno >= 6xx since it's defined in GMU node v3: - fix patterns (add backslash before dot) - add additional clocks - adreno@ -> gpu@ - add few const and change enum to anyOf - added clock & clock-names placeholder in non-conditional part (description) v4: - clock & clock-names - true,false instead maxItems - impl. #stream-id-cells, nvmem-cell-names, nvmem-cells - dropped requirement on firmware-name in zap_shader v5: - maxOtems -> maxItems typo fix .../devicetree/bindings/display/msm/gpu.txt | 157 --------- .../devicetree/bindings/display/msm/gpu.yaml | 302 ++++++++++++++++++ 2 files changed, 302 insertions(+), 157 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/msm/gpu.txt create mode 100644 Documentation/devicetree/bindings/display/msm/gpu.yaml