| Message ID | 20211012112735.2765-3-d.antony.jr@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [v2,1/3] arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen | expand |
On Tue, Oct 12, 2021 at 04:57:35PM +0530, J.R. Divya Antony wrote: > This device has MPU-6515 imu and Asahi Kasei AK09911 magnetometer, > Add support for it. > > Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> > --- > .../arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 51 +++++++++++++++++++ > 1 file changed, 51 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts > index 355c95365fcd..c2afda74b5b3 100644 > --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts > +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts > @@ -65,6 +65,41 @@ usb_id: usb-id { > }; > }; > > +&blsp_i2c2 { > + status = "okay"; > + > + magnetometer@c { > + compatible = "asahi-kasei,ak09911"; > + reg = <0x0c>; > + > + vdd-supply = <&pm8916_l8>; > + vid-supply = <&pm8916_l6>; > + > + reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&mag_reset_default>; > + }; > + > + imu@68 { > + compatible = "invensense,mpu6515"; > + reg = <0x68>; > + > + interrupt-parent = <&msmgpio>; > + interrupts = <36 IRQ_TYPE_EDGE_RISING>; > + > + vdd-supply = <&pm8916_l17>; > + vddio-supply = <&pm8916_l6>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&imu_default>; > + > + mount-matrix = "1", "0", "0", > + "0", "-1", "0", > + "0", "0", "1"; > + }; > +}; > + > &blsp_i2c5 { > status = "okay"; > > @@ -235,6 +270,22 @@ gpio_keys_default: gpio-keys-default { > bias-pull-up; > }; > > + imu_default: imu-default { > + pins = "gpio36"; > + function = "gpio"; > + > + drive-strength = <2>; > + bias-disable; > + }; > + > + mag_reset_default: mag-reset-default { > + pins = "gpio112"; > + function = "gpio"; > + > + drive-strength = <2>; > + bias-disable; > + }; > + > sd_vmmc_en_default: sd-vmmc-en-default { > pins = "gpio87"; > function = "gpio"; > -- > 2.33.0 >
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index 355c95365fcd..c2afda74b5b3 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -65,6 +65,41 @@ usb_id: usb-id { }; }; +&blsp_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8916_l8>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&mag_reset_default>; + }; + + imu@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + + interrupt-parent = <&msmgpio>; + interrupts = <36 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&imu_default>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; +}; + &blsp_i2c5 { status = "okay"; @@ -235,6 +270,22 @@ gpio_keys_default: gpio-keys-default { bias-pull-up; }; + imu_default: imu-default { + pins = "gpio36"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mag_reset_default: mag-reset-default { + pins = "gpio112"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + sd_vmmc_en_default: sd-vmmc-en-default { pins = "gpio87"; function = "gpio";
This device has MPU-6515 imu and Asahi Kasei AK09911 magnetometer, Add support for it. Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com> --- .../arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+)