| Message ID | 20211011185924.374213-7-tony.luck@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v9,1/7] x86/sgx: Add new sgx_epc_page flag bit to mark in-use pages | expand |
On Mon, 2021-10-11 at 11:59 -0700, Tony Luck wrote: > SGX reserved memory does not appear in the standard address maps. > > Add hook to call into the SGX code to check if an address is located > in SGX memory. > > There are other challenges in injecting errors into SGX. Update the > documentation with a sequence of operations to inject. > > Tested-by: Reinette Chatre <reinette.chatre@intel.com> > Signed-off-by: Tony Luck <tony.luck@intel.com> > --- > .../firmware-guide/acpi/apei/einj.rst | 19 +++++++++++++++++++ > drivers/acpi/apei/einj.c | 3 ++- > 2 files changed, 21 insertions(+), 1 deletion(-) > > diff --git a/Documentation/firmware-guide/acpi/apei/einj.rst b/Documentation/firmware-guide/acpi/apei/einj.rst > index c042176e1707..55e2331a6438 100644 > --- a/Documentation/firmware-guide/acpi/apei/einj.rst > +++ b/Documentation/firmware-guide/acpi/apei/einj.rst > @@ -181,5 +181,24 @@ You should see something like this in dmesg:: > [22715.834759] EDAC sbridge MC3: PROCESSOR 0:306e7 TIME 1422553404 SOCKET 0 APIC 0 > [22716.616173] EDAC MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x12345 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 > channel_mask:1 rank:0) > > +Special notes for injection into SGX enclaves: > + > +There may be a separate BIOS setup option to enable SGX injection. > + > +The injection process consists of setting some special memory controller > +trigger that will inject the error on the next write to the target > +address. But the h/w prevents any software outside of an SGX enclave > +from accessing enclave pages (even BIOS SMM mode). > + > +The following sequence can be used: > + 1) Determine physical address of enclave page > + 2) Use "notrigger=1" mode to inject (this will setup > + the injection address, but will not actually inject) > + 3) Enter the enclave > + 4) Store data to the virtual address matching physical address from step 1 > + 5) Execute CLFLUSH for that virtual address > + 6) Spin delay for 250ms > + 7) Read from the virtual address. This will trigger the error > + > For more information about EINJ, please refer to ACPI specification > version 4.0, section 17.5 and ACPI 5.0, section 18.6. > diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c > index 2882450c443e..67c335baad52 100644 > --- a/drivers/acpi/apei/einj.c > +++ b/drivers/acpi/apei/einj.c > @@ -544,7 +544,8 @@ static int einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2, > ((region_intersects(base_addr, size, IORESOURCE_SYSTEM_RAM, IORES_DESC_NONE) > != REGION_INTERSECTS) && > (region_intersects(base_addr, size, IORESOURCE_MEM, IORES_DESC_PERSISTENT_MEMORY) > - != REGION_INTERSECTS))) > + != REGION_INTERSECTS) && > + !arch_is_platform_page(base_addr))) > return -EINVAL; > > inject: Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> /Jarkko
diff --git a/Documentation/firmware-guide/acpi/apei/einj.rst b/Documentation/firmware-guide/acpi/apei/einj.rst index c042176e1707..55e2331a6438 100644 --- a/Documentation/firmware-guide/acpi/apei/einj.rst +++ b/Documentation/firmware-guide/acpi/apei/einj.rst @@ -181,5 +181,24 @@ You should see something like this in dmesg:: [22715.834759] EDAC sbridge MC3: PROCESSOR 0:306e7 TIME 1422553404 SOCKET 0 APIC 0 [22716.616173] EDAC MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x12345 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0) +Special notes for injection into SGX enclaves: + +There may be a separate BIOS setup option to enable SGX injection. + +The injection process consists of setting some special memory controller +trigger that will inject the error on the next write to the target +address. But the h/w prevents any software outside of an SGX enclave +from accessing enclave pages (even BIOS SMM mode). + +The following sequence can be used: + 1) Determine physical address of enclave page + 2) Use "notrigger=1" mode to inject (this will setup + the injection address, but will not actually inject) + 3) Enter the enclave + 4) Store data to the virtual address matching physical address from step 1 + 5) Execute CLFLUSH for that virtual address + 6) Spin delay for 250ms + 7) Read from the virtual address. This will trigger the error + For more information about EINJ, please refer to ACPI specification version 4.0, section 17.5 and ACPI 5.0, section 18.6. diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c index 2882450c443e..67c335baad52 100644 --- a/drivers/acpi/apei/einj.c +++ b/drivers/acpi/apei/einj.c @@ -544,7 +544,8 @@ static int einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2, ((region_intersects(base_addr, size, IORESOURCE_SYSTEM_RAM, IORES_DESC_NONE) != REGION_INTERSECTS) && (region_intersects(base_addr, size, IORESOURCE_MEM, IORES_DESC_PERSISTENT_MEMORY) - != REGION_INTERSECTS))) + != REGION_INTERSECTS) && + !arch_is_platform_page(base_addr))) return -EINVAL; inject: