| Message ID | 20211013105226.20225-1-mst@redhat.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [RFC] virtio: wrap config->reset calls | expand |
On 13-10-21, 06:55, Michael S. Tsirkin wrote: > This will enable cleanups down the road. > The idea is to disable cbs, then add "flush_queued_cbs" callback > as a parameter, this way drivers can flush any work > queued after callbacks have been disabled. > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > --- > drivers/gpio/gpio-virtio.c | 2 +- > drivers/i2c/busses/i2c-virtio.c | 2 +- Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
On 13.10.21 12:55, Michael S. Tsirkin wrote: > This will enable cleanups down the road. > The idea is to disable cbs, then add "flush_queued_cbs" callback > as a parameter, this way drivers can flush any work > queued after callbacks have been disabled. > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > --- > arch/um/drivers/virt-pci.c | 2 +- > drivers/block/virtio_blk.c | 4 ++-- > drivers/bluetooth/virtio_bt.c | 2 +- > drivers/char/hw_random/virtio-rng.c | 2 +- > drivers/char/virtio_console.c | 4 ++-- > drivers/crypto/virtio/virtio_crypto_core.c | 8 ++++---- > drivers/firmware/arm_scmi/virtio.c | 2 +- > drivers/gpio/gpio-virtio.c | 2 +- > drivers/gpu/drm/virtio/virtgpu_kms.c | 2 +- > drivers/i2c/busses/i2c-virtio.c | 2 +- > drivers/iommu/virtio-iommu.c | 2 +- > drivers/net/caif/caif_virtio.c | 2 +- > drivers/net/virtio_net.c | 4 ++-- > drivers/net/wireless/mac80211_hwsim.c | 2 +- > drivers/nvdimm/virtio_pmem.c | 2 +- > drivers/rpmsg/virtio_rpmsg_bus.c | 2 +- > drivers/scsi/virtio_scsi.c | 2 +- > drivers/virtio/virtio.c | 5 +++++ > drivers/virtio/virtio_balloon.c | 2 +- > drivers/virtio/virtio_input.c | 2 +- > drivers/virtio/virtio_mem.c | 2 +- > fs/fuse/virtio_fs.c | 4 ++-- > include/linux/virtio.h | 1 + > net/9p/trans_virtio.c | 2 +- > net/vmw_vsock/virtio_transport.c | 4 ++-- > sound/virtio/virtio_card.c | 4 ++-- > 26 files changed, 39 insertions(+), 33 deletions(-) > > diff --git a/arch/um/drivers/virt-pci.c b/arch/um/drivers/virt-pci.c > index c08066633023..22c4d87c9c15 100644 > --- a/arch/um/drivers/virt-pci.c > +++ b/arch/um/drivers/virt-pci.c > @@ -616,7 +616,7 @@ static void um_pci_virtio_remove(struct virtio_device *vdev) > int i; > > /* Stop all virtqueues */ > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > vdev->config->del_vqs(vdev); Nit: virtio_device_reset()? Because I see: int virtio_device_freeze(struct virtio_device *dev); int virtio_device_restore(struct virtio_device *dev); void virtio_device_ready(struct virtio_device *dev) But well, there is: void virtio_break_device(struct virtio_device *dev);
On Wed, Oct 13, 2021 at 01:03:46PM +0200, David Hildenbrand wrote: > On 13.10.21 12:55, Michael S. Tsirkin wrote: > > This will enable cleanups down the road. > > The idea is to disable cbs, then add "flush_queued_cbs" callback > > as a parameter, this way drivers can flush any work > > queued after callbacks have been disabled. > > > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > > --- > > arch/um/drivers/virt-pci.c | 2 +- > > drivers/block/virtio_blk.c | 4 ++-- > > drivers/bluetooth/virtio_bt.c | 2 +- > > drivers/char/hw_random/virtio-rng.c | 2 +- > > drivers/char/virtio_console.c | 4 ++-- > > drivers/crypto/virtio/virtio_crypto_core.c | 8 ++++---- > > drivers/firmware/arm_scmi/virtio.c | 2 +- > > drivers/gpio/gpio-virtio.c | 2 +- > > drivers/gpu/drm/virtio/virtgpu_kms.c | 2 +- > > drivers/i2c/busses/i2c-virtio.c | 2 +- > > drivers/iommu/virtio-iommu.c | 2 +- > > drivers/net/caif/caif_virtio.c | 2 +- > > drivers/net/virtio_net.c | 4 ++-- > > drivers/net/wireless/mac80211_hwsim.c | 2 +- > > drivers/nvdimm/virtio_pmem.c | 2 +- > > drivers/rpmsg/virtio_rpmsg_bus.c | 2 +- > > drivers/scsi/virtio_scsi.c | 2 +- > > drivers/virtio/virtio.c | 5 +++++ > > drivers/virtio/virtio_balloon.c | 2 +- > > drivers/virtio/virtio_input.c | 2 +- > > drivers/virtio/virtio_mem.c | 2 +- > > fs/fuse/virtio_fs.c | 4 ++-- > > include/linux/virtio.h | 1 + > > net/9p/trans_virtio.c | 2 +- > > net/vmw_vsock/virtio_transport.c | 4 ++-- > > sound/virtio/virtio_card.c | 4 ++-- > > 26 files changed, 39 insertions(+), 33 deletions(-) > > > > diff --git a/arch/um/drivers/virt-pci.c b/arch/um/drivers/virt-pci.c > > index c08066633023..22c4d87c9c15 100644 > > --- a/arch/um/drivers/virt-pci.c > > +++ b/arch/um/drivers/virt-pci.c > > @@ -616,7 +616,7 @@ static void um_pci_virtio_remove(struct virtio_device *vdev) > > int i; > > /* Stop all virtqueues */ > > - vdev->config->reset(vdev); > > + virtio_reset_device(vdev); > > vdev->config->del_vqs(vdev); > > Nit: virtio_device_reset()? > > Because I see: > > int virtio_device_freeze(struct virtio_device *dev); > int virtio_device_restore(struct virtio_device *dev); > void virtio_device_ready(struct virtio_device *dev) > > But well, there is: > void virtio_break_device(struct virtio_device *dev); Exactly. I don't know what's best, so I opted for plain english :) > -- > Thanks, > > David / dhildenb
On Wed, Oct 13, 2021 at 06:55:31AM -0400, Michael S. Tsirkin wrote: > This will enable cleanups down the road. > The idea is to disable cbs, then add "flush_queued_cbs" callback > as a parameter, this way drivers can flush any work > queued after callbacks have been disabled. > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > --- > arch/um/drivers/virt-pci.c | 2 +- > drivers/block/virtio_blk.c | 4 ++-- > drivers/bluetooth/virtio_bt.c | 2 +- > drivers/char/hw_random/virtio-rng.c | 2 +- > drivers/char/virtio_console.c | 4 ++-- > drivers/crypto/virtio/virtio_crypto_core.c | 8 ++++---- > drivers/firmware/arm_scmi/virtio.c | 2 +- > drivers/gpio/gpio-virtio.c | 2 +- > drivers/gpu/drm/virtio/virtgpu_kms.c | 2 +- > drivers/i2c/busses/i2c-virtio.c | 2 +- > drivers/iommu/virtio-iommu.c | 2 +- > drivers/net/caif/caif_virtio.c | 2 +- > drivers/net/virtio_net.c | 4 ++-- > drivers/net/wireless/mac80211_hwsim.c | 2 +- > drivers/nvdimm/virtio_pmem.c | 2 +- > drivers/rpmsg/virtio_rpmsg_bus.c | 2 +- > drivers/scsi/virtio_scsi.c | 2 +- > drivers/virtio/virtio.c | 5 +++++ > drivers/virtio/virtio_balloon.c | 2 +- > drivers/virtio/virtio_input.c | 2 +- > drivers/virtio/virtio_mem.c | 2 +- > fs/fuse/virtio_fs.c | 4 ++-- fs/fuse/virtio_fs.c changes look good to me. Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Vivek [..] > diff --git a/fs/fuse/virtio_fs.c b/fs/fuse/virtio_fs.c > index 0ad89c6629d7..27c3b74070a2 100644 > --- a/fs/fuse/virtio_fs.c > +++ b/fs/fuse/virtio_fs.c > @@ -895,7 +895,7 @@ static int virtio_fs_probe(struct virtio_device *vdev) > return 0; > > out_vqs: > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > virtio_fs_cleanup_vqs(vdev, fs); > kfree(fs->vqs); > > @@ -927,7 +927,7 @@ static void virtio_fs_remove(struct virtio_device *vdev) > list_del_init(&fs->list); > virtio_fs_stop_all_queues(fs); > virtio_fs_drain_all_queues_locked(fs); > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > virtio_fs_cleanup_vqs(vdev, fs); > > vdev->priv = NULL; Thanks Vivek
On Wed, Oct 13, 2021 at 06:55:31AM -0400, Michael S. Tsirkin wrote: > This will enable cleanups down the road. > The idea is to disable cbs, then add "flush_queued_cbs" callback > as a parameter, this way drivers can flush any work > queued after callbacks have been disabled. > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > --- > arch/um/drivers/virt-pci.c | 2 +- > drivers/block/virtio_blk.c | 4 ++-- > drivers/bluetooth/virtio_bt.c | 2 +- > drivers/char/hw_random/virtio-rng.c | 2 +- > drivers/char/virtio_console.c | 4 ++-- > drivers/crypto/virtio/virtio_crypto_core.c | 8 ++++---- > drivers/firmware/arm_scmi/virtio.c | 2 +- > drivers/gpio/gpio-virtio.c | 2 +- > drivers/gpu/drm/virtio/virtgpu_kms.c | 2 +- > drivers/i2c/busses/i2c-virtio.c | 2 +- > drivers/iommu/virtio-iommu.c | 2 +- > drivers/net/caif/caif_virtio.c | 2 +- > drivers/net/virtio_net.c | 4 ++-- > drivers/net/wireless/mac80211_hwsim.c | 2 +- > drivers/nvdimm/virtio_pmem.c | 2 +- > drivers/rpmsg/virtio_rpmsg_bus.c | 2 +- > drivers/scsi/virtio_scsi.c | 2 +- > drivers/virtio/virtio.c | 5 +++++ > drivers/virtio/virtio_balloon.c | 2 +- > drivers/virtio/virtio_input.c | 2 +- > drivers/virtio/virtio_mem.c | 2 +- > fs/fuse/virtio_fs.c | 4 ++-- > include/linux/virtio.h | 1 + > net/9p/trans_virtio.c | 2 +- > net/vmw_vsock/virtio_transport.c | 4 ++-- > sound/virtio/virtio_card.c | 4 ++-- > 26 files changed, 39 insertions(+), 33 deletions(-) > > static struct virtio_driver virtio_pmem_driver = { > diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c > index 8e49a3bacfc7..6a11952822df 100644 > --- a/drivers/rpmsg/virtio_rpmsg_bus.c > +++ b/drivers/rpmsg/virtio_rpmsg_bus.c > @@ -1015,7 +1015,7 @@ static void rpmsg_remove(struct virtio_device *vdev) > size_t total_buf_space = vrp->num_bufs * vrp->buf_size; > int ret; > > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> > ret = device_for_each_child(&vdev->dev, NULL, rpmsg_remove_device); > if (ret)
On 13.10.21 14:17, Michael S. Tsirkin wrote: > On Wed, Oct 13, 2021 at 01:03:46PM +0200, David Hildenbrand wrote: >> On 13.10.21 12:55, Michael S. Tsirkin wrote: >>> This will enable cleanups down the road. >>> The idea is to disable cbs, then add "flush_queued_cbs" callback >>> as a parameter, this way drivers can flush any work >>> queued after callbacks have been disabled. >>> >>> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> >>> --- >>> arch/um/drivers/virt-pci.c | 2 +- >>> drivers/block/virtio_blk.c | 4 ++-- >>> drivers/bluetooth/virtio_bt.c | 2 +- >>> drivers/char/hw_random/virtio-rng.c | 2 +- >>> drivers/char/virtio_console.c | 4 ++-- >>> drivers/crypto/virtio/virtio_crypto_core.c | 8 ++++---- >>> drivers/firmware/arm_scmi/virtio.c | 2 +- >>> drivers/gpio/gpio-virtio.c | 2 +- >>> drivers/gpu/drm/virtio/virtgpu_kms.c | 2 +- >>> drivers/i2c/busses/i2c-virtio.c | 2 +- >>> drivers/iommu/virtio-iommu.c | 2 +- >>> drivers/net/caif/caif_virtio.c | 2 +- >>> drivers/net/virtio_net.c | 4 ++-- >>> drivers/net/wireless/mac80211_hwsim.c | 2 +- >>> drivers/nvdimm/virtio_pmem.c | 2 +- >>> drivers/rpmsg/virtio_rpmsg_bus.c | 2 +- >>> drivers/scsi/virtio_scsi.c | 2 +- >>> drivers/virtio/virtio.c | 5 +++++ >>> drivers/virtio/virtio_balloon.c | 2 +- >>> drivers/virtio/virtio_input.c | 2 +- >>> drivers/virtio/virtio_mem.c | 2 +- >>> fs/fuse/virtio_fs.c | 4 ++-- >>> include/linux/virtio.h | 1 + >>> net/9p/trans_virtio.c | 2 +- >>> net/vmw_vsock/virtio_transport.c | 4 ++-- >>> sound/virtio/virtio_card.c | 4 ++-- >>> 26 files changed, 39 insertions(+), 33 deletions(-) >>> >>> diff --git a/arch/um/drivers/virt-pci.c b/arch/um/drivers/virt-pci.c >>> index c08066633023..22c4d87c9c15 100644 >>> --- a/arch/um/drivers/virt-pci.c >>> +++ b/arch/um/drivers/virt-pci.c >>> @@ -616,7 +616,7 @@ static void um_pci_virtio_remove(struct virtio_device *vdev) >>> int i; >>> /* Stop all virtqueues */ >>> - vdev->config->reset(vdev); >>> + virtio_reset_device(vdev); >>> vdev->config->del_vqs(vdev); >> >> Nit: virtio_device_reset()? >> >> Because I see: >> >> int virtio_device_freeze(struct virtio_device *dev); >> int virtio_device_restore(struct virtio_device *dev); >> void virtio_device_ready(struct virtio_device *dev) >> >> But well, there is: >> void virtio_break_device(struct virtio_device *dev); > > Exactly. I don't know what's best, so I opted for plain english :) Fair enough, LGTM Reviewed-by: David Hildenbrand <david@redhat.com>
On Wed, Oct 13, 2021 at 06:55:31AM -0400, Michael S. Tsirkin wrote: > This will enable cleanups down the road. > The idea is to disable cbs, then add "flush_queued_cbs" callback > as a parameter, this way drivers can flush any work > queued after callbacks have been disabled. > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > --- > arch/um/drivers/virt-pci.c | 2 +- > drivers/block/virtio_blk.c | 4 ++-- > drivers/bluetooth/virtio_bt.c | 2 +- > drivers/char/hw_random/virtio-rng.c | 2 +- > drivers/char/virtio_console.c | 4 ++-- > drivers/crypto/virtio/virtio_crypto_core.c | 8 ++++---- > drivers/firmware/arm_scmi/virtio.c | 2 +- > drivers/gpio/gpio-virtio.c | 2 +- > drivers/gpu/drm/virtio/virtgpu_kms.c | 2 +- > drivers/i2c/busses/i2c-virtio.c | 2 +- > drivers/iommu/virtio-iommu.c | 2 +- > drivers/net/caif/caif_virtio.c | 2 +- > drivers/net/virtio_net.c | 4 ++-- > drivers/net/wireless/mac80211_hwsim.c | 2 +- > drivers/nvdimm/virtio_pmem.c | 2 +- > drivers/rpmsg/virtio_rpmsg_bus.c | 2 +- > drivers/scsi/virtio_scsi.c | 2 +- > drivers/virtio/virtio.c | 5 +++++ > drivers/virtio/virtio_balloon.c | 2 +- > drivers/virtio/virtio_input.c | 2 +- > drivers/virtio/virtio_mem.c | 2 +- > fs/fuse/virtio_fs.c | 4 ++-- > include/linux/virtio.h | 1 + > net/9p/trans_virtio.c | 2 +- > net/vmw_vsock/virtio_transport.c | 4 ++-- > sound/virtio/virtio_card.c | 4 ++-- > 26 files changed, 39 insertions(+), 33 deletions(-) > [snip] > diff --git a/drivers/firmware/arm_scmi/virtio.c b/drivers/firmware/arm_scmi/virtio.c > index 11e8efb71375..6b8d93fe8848 100644 > --- a/drivers/firmware/arm_scmi/virtio.c > +++ b/drivers/firmware/arm_scmi/virtio.c > @@ -452,7 +452,7 @@ static void scmi_vio_remove(struct virtio_device *vdev) > * outstanding message on any vqueue to be ignored by complete_cb: now > * we can just stop processing buffers and destroy the vqueues. > */ > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > vdev->config->del_vqs(vdev); > /* Ensure scmi_vdev is visible as NULL */ > smp_store_mb(scmi_vdev, NULL); Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Thanks, Cristian
> This will enable cleanups down the road. > The idea is to disable cbs, then add "flush_queued_cbs" callback > as a parameter, this way drivers can flush any work > queued after callbacks have been disabled. > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > --- > arch/um/drivers/virt-pci.c | 2 +- > drivers/block/virtio_blk.c | 4 ++-- > drivers/bluetooth/virtio_bt.c | 2 +- > drivers/char/hw_random/virtio-rng.c | 2 +- > drivers/char/virtio_console.c | 4 ++-- > drivers/crypto/virtio/virtio_crypto_core.c | 8 ++++---- > drivers/firmware/arm_scmi/virtio.c | 2 +- > drivers/gpio/gpio-virtio.c | 2 +- > drivers/gpu/drm/virtio/virtgpu_kms.c | 2 +- > drivers/i2c/busses/i2c-virtio.c | 2 +- > drivers/iommu/virtio-iommu.c | 2 +- > drivers/net/caif/caif_virtio.c | 2 +- > drivers/net/virtio_net.c | 4 ++-- > drivers/net/wireless/mac80211_hwsim.c | 2 +- > drivers/nvdimm/virtio_pmem.c | 2 +- > drivers/rpmsg/virtio_rpmsg_bus.c | 2 +- > drivers/scsi/virtio_scsi.c | 2 +- > drivers/virtio/virtio.c | 5 +++++ > drivers/virtio/virtio_balloon.c | 2 +- > drivers/virtio/virtio_input.c | 2 +- > drivers/virtio/virtio_mem.c | 2 +- > fs/fuse/virtio_fs.c | 4 ++-- > include/linux/virtio.h | 1 + > net/9p/trans_virtio.c | 2 +- > net/vmw_vsock/virtio_transport.c | 4 ++-- > sound/virtio/virtio_card.c | 4 ++-- > 26 files changed, 39 insertions(+), 33 deletions(-) > > diff --git a/arch/um/drivers/virt-pci.c b/arch/um/drivers/virt-pci.c > index c08066633023..22c4d87c9c15 100644 > --- a/arch/um/drivers/virt-pci.c > +++ b/arch/um/drivers/virt-pci.c > @@ -616,7 +616,7 @@ static void um_pci_virtio_remove(struct virtio_device *vdev) > int i; > > /* Stop all virtqueues */ > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > vdev->config->del_vqs(vdev); > > device_set_wakeup_enable(&vdev->dev, false); > diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c > index 303caf2d17d0..83d0af3fbf30 100644 > --- a/drivers/block/virtio_blk.c > +++ b/drivers/block/virtio_blk.c > @@ -910,7 +910,7 @@ static void virtblk_remove(struct virtio_device *vdev) > mutex_lock(&vblk->vdev_mutex); > > /* Stop all the virtqueues. */ > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > > /* Virtqueues are stopped, nothing can use vblk->vdev anymore. */ > vblk->vdev = NULL; > @@ -929,7 +929,7 @@ static int virtblk_freeze(struct virtio_device *vdev) > struct virtio_blk *vblk = vdev->priv; > > /* Ensure we don't receive any more interrupts */ > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > > /* Make sure no work handler is accessing the device. */ > flush_work(&vblk->config_work); > diff --git a/drivers/bluetooth/virtio_bt.c b/drivers/bluetooth/virtio_bt.c > index 57908ce4fae8..24a9258962fa 100644 > --- a/drivers/bluetooth/virtio_bt.c > +++ b/drivers/bluetooth/virtio_bt.c > @@ -364,7 +364,7 @@ static void virtbt_remove(struct virtio_device *vdev) > struct hci_dev *hdev = vbt->hdev; > > hci_unregister_dev(hdev); > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > > hci_free_dev(hdev); > vbt->hdev = NULL; > diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c > index a90001e02bf7..95980489514b 100644 > --- a/drivers/char/hw_random/virtio-rng.c > +++ b/drivers/char/hw_random/virtio-rng.c > @@ -134,7 +134,7 @@ static void remove_common(struct virtio_device *vdev) > vi->hwrng_removed = true; > vi->data_avail = 0; > complete(&vi->have_data); > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > vi->busy = false; > if (vi->hwrng_register_done) > hwrng_unregister(&vi->hwrng); > diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c > index 7eaf303a7a86..08bbd693436f 100644 > --- a/drivers/char/virtio_console.c > +++ b/drivers/char/virtio_console.c > @@ -1957,7 +1957,7 @@ static void virtcons_remove(struct virtio_device *vdev) > spin_unlock_irq(&pdrvdata_lock); > > /* Disable interrupts for vqs */ > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > /* Finish up work that's lined up */ > if (use_multiport(portdev)) > cancel_work_sync(&portdev->control_work); > @@ -2139,7 +2139,7 @@ static int virtcons_freeze(struct virtio_device *vdev) > > portdev = vdev->priv; > > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > > if (use_multiport(portdev)) > virtqueue_disable_cb(portdev->c_ivq); > diff --git a/drivers/crypto/virtio/virtio_crypto_core.c b/drivers/crypto/virtio/virtio_crypto_core.c > index e2375d992308..8e977b7627cb 100644 > --- a/drivers/crypto/virtio/virtio_crypto_core.c > +++ b/drivers/crypto/virtio/virtio_crypto_core.c > @@ -404,7 +404,7 @@ static int virtcrypto_probe(struct virtio_device *vdev) > free_engines: > virtcrypto_clear_crypto_engines(vcrypto); > free_vqs: > - vcrypto->vdev->config->reset(vdev); > + virtio_reset_device(vdev); > virtcrypto_del_vqs(vcrypto); > free_dev: > virtcrypto_devmgr_rm_dev(vcrypto); > @@ -436,7 +436,7 @@ static void virtcrypto_remove(struct virtio_device *vdev) > > if (virtcrypto_dev_started(vcrypto)) > virtcrypto_dev_stop(vcrypto); > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > virtcrypto_free_unused_reqs(vcrypto); > virtcrypto_clear_crypto_engines(vcrypto); > virtcrypto_del_vqs(vcrypto); > @@ -456,7 +456,7 @@ static int virtcrypto_freeze(struct virtio_device *vdev) > { > struct virtio_crypto *vcrypto = vdev->priv; > > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > virtcrypto_free_unused_reqs(vcrypto); > if (virtcrypto_dev_started(vcrypto)) > virtcrypto_dev_stop(vcrypto); > @@ -492,7 +492,7 @@ static int virtcrypto_restore(struct virtio_device *vdev) > free_engines: > virtcrypto_clear_crypto_engines(vcrypto); > free_vqs: > - vcrypto->vdev->config->reset(vdev); > + virtio_reset_device(vdev); > virtcrypto_del_vqs(vcrypto); > return err; > } > diff --git a/drivers/firmware/arm_scmi/virtio.c b/drivers/firmware/arm_scmi/virtio.c > index 11e8efb71375..6b8d93fe8848 100644 > --- a/drivers/firmware/arm_scmi/virtio.c > +++ b/drivers/firmware/arm_scmi/virtio.c > @@ -452,7 +452,7 @@ static void scmi_vio_remove(struct virtio_device *vdev) > * outstanding message on any vqueue to be ignored by complete_cb: now > * we can just stop processing buffers and destroy the vqueues. > */ > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > vdev->config->del_vqs(vdev); > /* Ensure scmi_vdev is visible as NULL */ > smp_store_mb(scmi_vdev, NULL); > diff --git a/drivers/gpio/gpio-virtio.c b/drivers/gpio/gpio-virtio.c > index d24f1c9264bc..5029f01966f4 100644 > --- a/drivers/gpio/gpio-virtio.c > +++ b/drivers/gpio/gpio-virtio.c > @@ -203,7 +203,7 @@ static void virtio_gpio_request_vq(struct virtqueue *vq) > > static void virtio_gpio_free_vqs(struct virtio_device *vdev) > { > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > vdev->config->del_vqs(vdev); > } > > diff --git a/drivers/gpu/drm/virtio/virtgpu_kms.c b/drivers/gpu/drm/virtio/virtgpu_kms.c > index f3379059f324..6aa605b8d3a1 100644 > --- a/drivers/gpu/drm/virtio/virtgpu_kms.c > +++ b/drivers/gpu/drm/virtio/virtgpu_kms.c > @@ -257,7 +257,7 @@ void virtio_gpu_deinit(struct drm_device *dev) > flush_work(&vgdev->ctrlq.dequeue_work); > flush_work(&vgdev->cursorq.dequeue_work); > flush_work(&vgdev->config_changed_work); > - vgdev->vdev->config->reset(vgdev->vdev); > + virtio_reset_device(vgdev->vdev); > vgdev->vdev->config->del_vqs(vgdev->vdev); > } > > diff --git a/drivers/i2c/busses/i2c-virtio.c b/drivers/i2c/busses/i2c-virtio.c > index f10a603b13fb..eb3261ac64dc 100644 > --- a/drivers/i2c/busses/i2c-virtio.c > +++ b/drivers/i2c/busses/i2c-virtio.c > @@ -177,7 +177,7 @@ static int virtio_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, > > static void virtio_i2c_del_vqs(struct virtio_device *vdev) > { > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > vdev->config->del_vqs(vdev); > } > > diff --git a/drivers/iommu/virtio-iommu.c b/drivers/iommu/virtio-iommu.c > index 80930ce04a16..1d4e1e7cf175 100644 > --- a/drivers/iommu/virtio-iommu.c > +++ b/drivers/iommu/virtio-iommu.c > @@ -1115,7 +1115,7 @@ static void viommu_remove(struct virtio_device *vdev) > iommu_device_unregister(&viommu->iommu); > > /* Stop all virtqueues */ > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > vdev->config->del_vqs(vdev); > > dev_info(&vdev->dev, "device removed\n"); > diff --git a/drivers/net/caif/caif_virtio.c b/drivers/net/caif/caif_virtio.c > index 91230894692d..444ef6a342f6 100644 > --- a/drivers/net/caif/caif_virtio.c > +++ b/drivers/net/caif/caif_virtio.c > @@ -754,7 +754,7 @@ static void cfv_remove(struct virtio_device *vdev) > debugfs_remove_recursive(cfv->debugfs); > > vringh_kiov_cleanup(&cfv->ctx.riov); > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > vdev->vringh_config->del_vrhs(cfv->vdev); > cfv->vr_rx = NULL; > vdev->config->del_vqs(cfv->vdev); > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c > index 79bd2585ec6b..8c10fcad73a4 100644 > --- a/drivers/net/virtio_net.c > +++ b/drivers/net/virtio_net.c > @@ -3274,7 +3274,7 @@ static int virtnet_probe(struct virtio_device *vdev) > return 0; > > free_unregister_netdev: > - vi->vdev->config->reset(vdev); > + virtio_reset_device(vdev); > > unregister_netdev(dev); > free_failover: > @@ -3290,7 +3290,7 @@ static int virtnet_probe(struct virtio_device *vdev) > > static void remove_vq_common(struct virtnet_info *vi) > { > - vi->vdev->config->reset(vi->vdev); > + virtio_reset_device(vi->vdev); > > /* Free unused buffers in both send and recv, if any. */ > free_unused_bufs(vi); > diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c > index 0adae76eb8df..9ee430c1d4a2 100644 > --- a/drivers/net/wireless/mac80211_hwsim.c > +++ b/drivers/net/wireless/mac80211_hwsim.c > @@ -4369,7 +4369,7 @@ static void remove_vqs(struct virtio_device *vdev) > { > int i; > > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > > for (i = 0; i < ARRAY_SIZE(hwsim_vqs); i++) { > struct virtqueue *vq = hwsim_vqs[i]; > diff --git a/drivers/nvdimm/virtio_pmem.c b/drivers/nvdimm/virtio_pmem.c > index 726c7354d465..995b6cdc67ed 100644 > --- a/drivers/nvdimm/virtio_pmem.c > +++ b/drivers/nvdimm/virtio_pmem.c > @@ -105,7 +105,7 @@ static void virtio_pmem_remove(struct virtio_device *vdev) > > nvdimm_bus_unregister(nvdimm_bus); > vdev->config->del_vqs(vdev); > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > } > > static struct virtio_driver virtio_pmem_driver = { > diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c > index 8e49a3bacfc7..6a11952822df 100644 > --- a/drivers/rpmsg/virtio_rpmsg_bus.c > +++ b/drivers/rpmsg/virtio_rpmsg_bus.c > @@ -1015,7 +1015,7 @@ static void rpmsg_remove(struct virtio_device *vdev) > size_t total_buf_space = vrp->num_bufs * vrp->buf_size; > int ret; > > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > > ret = device_for_each_child(&vdev->dev, NULL, rpmsg_remove_device); > if (ret) > diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c > index 07d0250f17c3..f2502a8a5213 100644 > --- a/drivers/scsi/virtio_scsi.c > +++ b/drivers/scsi/virtio_scsi.c > @@ -778,7 +778,7 @@ static void virtscsi_init_vq(struct virtio_scsi_vq *virtscsi_vq, > static void virtscsi_remove_vqs(struct virtio_device *vdev) > { > /* Stop all the virtqueues. */ > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > vdev->config->del_vqs(vdev); > } > > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c > index 0a5b54034d4b..a67dd0eca578 100644 > --- a/drivers/virtio/virtio.c > +++ b/drivers/virtio/virtio.c > @@ -204,6 +204,11 @@ int virtio_finalize_features(struct virtio_device *dev) > } > EXPORT_SYMBOL_GPL(virtio_finalize_features); > > +static void virtio_reset_device(struct virtio_device *dev) > +{ > + dev->config->reset(dev); > +} > + > static int virtio_dev_probe(struct device *_d) > { > int err, i; > diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c > index c22ff0117b46..f4c34a2a6b8e 100644 > --- a/drivers/virtio/virtio_balloon.c > +++ b/drivers/virtio/virtio_balloon.c > @@ -1056,7 +1056,7 @@ static void remove_common(struct virtio_balloon *vb) > return_free_pages_to_mm(vb, ULONG_MAX); > > /* Now we reset the device so we can clean up the queues. */ > - vb->vdev->config->reset(vb->vdev); > + virtio_reset_device(vb->vdev); > > vb->vdev->config->del_vqs(vb->vdev); > } > diff --git a/drivers/virtio/virtio_input.c b/drivers/virtio/virtio_input.c > index ce51ae165943..3aa46703872d 100644 > --- a/drivers/virtio/virtio_input.c > +++ b/drivers/virtio/virtio_input.c > @@ -347,7 +347,7 @@ static void virtinput_remove(struct virtio_device *vdev) > spin_unlock_irqrestore(&vi->lock, flags); > > input_unregister_device(vi->idev); > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > while ((buf = virtqueue_detach_unused_buf(vi->sts)) != NULL) > kfree(buf); > vdev->config->del_vqs(vdev); > diff --git a/drivers/virtio/virtio_mem.c b/drivers/virtio/virtio_mem.c > index bef8ad6bf466..3bab0a625a4b 100644 > --- a/drivers/virtio/virtio_mem.c > +++ b/drivers/virtio/virtio_mem.c > @@ -2722,7 +2722,7 @@ static void virtio_mem_remove(struct virtio_device *vdev) > } > > /* reset the device and cleanup the queues */ > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > vdev->config->del_vqs(vdev); > > kfree(vm); > diff --git a/fs/fuse/virtio_fs.c b/fs/fuse/virtio_fs.c > index 0ad89c6629d7..27c3b74070a2 100644 > --- a/fs/fuse/virtio_fs.c > +++ b/fs/fuse/virtio_fs.c > @@ -895,7 +895,7 @@ static int virtio_fs_probe(struct virtio_device *vdev) > return 0; > > out_vqs: > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > virtio_fs_cleanup_vqs(vdev, fs); > kfree(fs->vqs); > > @@ -927,7 +927,7 @@ static void virtio_fs_remove(struct virtio_device *vdev) > list_del_init(&fs->list); > virtio_fs_stop_all_queues(fs); > virtio_fs_drain_all_queues_locked(fs); > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > virtio_fs_cleanup_vqs(vdev, fs); > > vdev->priv = NULL; > diff --git a/include/linux/virtio.h b/include/linux/virtio.h > index 41edbc01ffa4..72292a62cd90 100644 > --- a/include/linux/virtio.h > +++ b/include/linux/virtio.h > @@ -138,6 +138,7 @@ int virtio_finalize_features(struct virtio_device *dev); > int virtio_device_freeze(struct virtio_device *dev); > int virtio_device_restore(struct virtio_device *dev); > #endif > +void virtio_reset_device(struct virtio_device *dev); > > size_t virtio_max_dma_size(struct virtio_device *vdev); > > diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c > index 490a4c900339..19c69821dd04 100644 > --- a/net/9p/trans_virtio.c > +++ b/net/9p/trans_virtio.c > @@ -721,7 +721,7 @@ static void p9_virtio_remove(struct virtio_device *vdev) > > mutex_unlock(&virtio_9p_lock); > > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > vdev->config->del_vqs(vdev); > > sysfs_remove_file(&(vdev->dev.kobj), &dev_attr_mount_tag.attr); > diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c > index 4f7c99dfd16c..fb3302fff627 100644 > --- a/net/vmw_vsock/virtio_transport.c > +++ b/net/vmw_vsock/virtio_transport.c > @@ -665,7 +665,7 @@ static void virtio_vsock_remove(struct virtio_device *vdev) > vsock_for_each_connected_socket(virtio_vsock_reset_sock); > > /* Stop all work handlers to make sure no one is accessing the device, > - * so we can safely call vdev->config->reset(). > + * so we can safely call virtio_reset_device(). > */ > mutex_lock(&vsock->rx_lock); > vsock->rx_run = false; > @@ -682,7 +682,7 @@ static void virtio_vsock_remove(struct virtio_device *vdev) > /* Flush all device writes and interrupts, device will not use any > * more buffers. > */ > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > > mutex_lock(&vsock->rx_lock); > while ((pkt = virtqueue_detach_unused_buf(vsock->vqs[VSOCK_VQ_RX]))) > diff --git a/sound/virtio/virtio_card.c b/sound/virtio/virtio_card.c > index 150ab3e37013..e2847c040f75 100644 > --- a/sound/virtio/virtio_card.c > +++ b/sound/virtio/virtio_card.c > @@ -350,7 +350,7 @@ static void virtsnd_remove(struct virtio_device *vdev) > snd_card_free(snd->card); > > vdev->config->del_vqs(vdev); > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > > for (i = 0; snd->substreams && i < snd->nsubstreams; ++i) { > struct virtio_pcm_substream *vss = &snd->substreams[i]; > @@ -379,7 +379,7 @@ static int virtsnd_freeze(struct virtio_device *vdev) > virtsnd_ctl_msg_cancel_all(snd); > > vdev->config->del_vqs(vdev); > - vdev->config->reset(vdev); > + virtio_reset_device(vdev); > > for (i = 0; i < snd->nsubstreams; ++i) > cancel_work_sync(&snd->substreams[i].elapsed_period); Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
On 13.10.2021 12:55, Michael S. Tsirkin wrote: > This will enable cleanups down the road. > The idea is to disable cbs, then add "flush_queued_cbs" callback > as a parameter, this way drivers can flush any work > queued after callbacks have been disabled. > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > --- > sound/virtio/virtio_card.c | 4 ++-- > Reviewed-by: Anton Yakovlev <anton.yakovlev@opensynergy.com>
On Wed, Oct 13, 2021 at 06:55:31AM -0400, Michael S. Tsirkin wrote: > This will enable cleanups down the road. > The idea is to disable cbs, then add "flush_queued_cbs" callback > as a parameter, this way drivers can flush any work > queued after callbacks have been disabled. > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > --- > drivers/iommu/virtio-iommu.c | 2 +- Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
On Wed, Oct 13, 2021 at 06:55:31AM -0400, Michael S. Tsirkin wrote: > This will enable cleanups down the road. > The idea is to disable cbs, then add "flush_queued_cbs" callback > as a parameter, this way drivers can flush any work > queued after callbacks have been disabled. > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C changes
On Wed, Oct 13, 2021 at 06:55:31AM -0400, Michael S. Tsirkin wrote: > This will enable cleanups down the road. > The idea is to disable cbs, then add "flush_queued_cbs" callback > as a parameter, this way drivers can flush any work > queued after callbacks have been disabled. > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > --- > arch/um/drivers/virt-pci.c | 2 +- > drivers/block/virtio_blk.c | 4 ++-- > drivers/bluetooth/virtio_bt.c | 2 +- > drivers/char/hw_random/virtio-rng.c | 2 +- > drivers/char/virtio_console.c | 4 ++-- > drivers/crypto/virtio/virtio_crypto_core.c | 8 ++++---- > drivers/firmware/arm_scmi/virtio.c | 2 +- > drivers/gpio/gpio-virtio.c | 2 +- > drivers/gpu/drm/virtio/virtgpu_kms.c | 2 +- > drivers/i2c/busses/i2c-virtio.c | 2 +- > drivers/iommu/virtio-iommu.c | 2 +- > drivers/net/caif/caif_virtio.c | 2 +- > drivers/net/virtio_net.c | 4 ++-- > drivers/net/wireless/mac80211_hwsim.c | 2 +- > drivers/nvdimm/virtio_pmem.c | 2 +- > drivers/rpmsg/virtio_rpmsg_bus.c | 2 +- > drivers/scsi/virtio_scsi.c | 2 +- > drivers/virtio/virtio.c | 5 +++++ > drivers/virtio/virtio_balloon.c | 2 +- > drivers/virtio/virtio_input.c | 2 +- > drivers/virtio/virtio_mem.c | 2 +- > fs/fuse/virtio_fs.c | 4 ++-- > include/linux/virtio.h | 1 + > net/9p/trans_virtio.c | 2 +- > net/vmw_vsock/virtio_transport.c | 4 ++-- > sound/virtio/virtio_card.c | 4 ++-- > 26 files changed, 39 insertions(+), 33 deletions(-) Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
On Wed, Oct 13, 2021 at 06:55:31AM -0400, Michael S. Tsirkin wrote: >This will enable cleanups down the road. >The idea is to disable cbs, then add "flush_queued_cbs" callback >as a parameter, this way drivers can flush any work >queued after callbacks have been disabled. > >Signed-off-by: Michael S. Tsirkin <mst@redhat.com> >--- > arch/um/drivers/virt-pci.c | 2 +- > drivers/block/virtio_blk.c | 4 ++-- > drivers/bluetooth/virtio_bt.c | 2 +- > drivers/char/hw_random/virtio-rng.c | 2 +- > drivers/char/virtio_console.c | 4 ++-- > drivers/crypto/virtio/virtio_crypto_core.c | 8 ++++---- > drivers/firmware/arm_scmi/virtio.c | 2 +- > drivers/gpio/gpio-virtio.c | 2 +- > drivers/gpu/drm/virtio/virtgpu_kms.c | 2 +- > drivers/i2c/busses/i2c-virtio.c | 2 +- > drivers/iommu/virtio-iommu.c | 2 +- > drivers/net/caif/caif_virtio.c | 2 +- > drivers/net/virtio_net.c | 4 ++-- > drivers/net/wireless/mac80211_hwsim.c | 2 +- > drivers/nvdimm/virtio_pmem.c | 2 +- > drivers/rpmsg/virtio_rpmsg_bus.c | 2 +- > drivers/scsi/virtio_scsi.c | 2 +- > drivers/virtio/virtio.c | 5 +++++ > drivers/virtio/virtio_balloon.c | 2 +- > drivers/virtio/virtio_input.c | 2 +- > drivers/virtio/virtio_mem.c | 2 +- > fs/fuse/virtio_fs.c | 4 ++-- > include/linux/virtio.h | 1 + > net/9p/trans_virtio.c | 2 +- > net/vmw_vsock/virtio_transport.c | 4 ++-- Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
diff --git a/arch/um/drivers/virt-pci.c b/arch/um/drivers/virt-pci.c index c08066633023..22c4d87c9c15 100644 --- a/arch/um/drivers/virt-pci.c +++ b/arch/um/drivers/virt-pci.c @@ -616,7 +616,7 @@ static void um_pci_virtio_remove(struct virtio_device *vdev) int i; /* Stop all virtqueues */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); device_set_wakeup_enable(&vdev->dev, false); diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 303caf2d17d0..83d0af3fbf30 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -910,7 +910,7 @@ static void virtblk_remove(struct virtio_device *vdev) mutex_lock(&vblk->vdev_mutex); /* Stop all the virtqueues. */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); /* Virtqueues are stopped, nothing can use vblk->vdev anymore. */ vblk->vdev = NULL; @@ -929,7 +929,7 @@ static int virtblk_freeze(struct virtio_device *vdev) struct virtio_blk *vblk = vdev->priv; /* Ensure we don't receive any more interrupts */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); /* Make sure no work handler is accessing the device. */ flush_work(&vblk->config_work); diff --git a/drivers/bluetooth/virtio_bt.c b/drivers/bluetooth/virtio_bt.c index 57908ce4fae8..24a9258962fa 100644 --- a/drivers/bluetooth/virtio_bt.c +++ b/drivers/bluetooth/virtio_bt.c @@ -364,7 +364,7 @@ static void virtbt_remove(struct virtio_device *vdev) struct hci_dev *hdev = vbt->hdev; hci_unregister_dev(hdev); - vdev->config->reset(vdev); + virtio_reset_device(vdev); hci_free_dev(hdev); vbt->hdev = NULL; diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c index a90001e02bf7..95980489514b 100644 --- a/drivers/char/hw_random/virtio-rng.c +++ b/drivers/char/hw_random/virtio-rng.c @@ -134,7 +134,7 @@ static void remove_common(struct virtio_device *vdev) vi->hwrng_removed = true; vi->data_avail = 0; complete(&vi->have_data); - vdev->config->reset(vdev); + virtio_reset_device(vdev); vi->busy = false; if (vi->hwrng_register_done) hwrng_unregister(&vi->hwrng); diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 7eaf303a7a86..08bbd693436f 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1957,7 +1957,7 @@ static void virtcons_remove(struct virtio_device *vdev) spin_unlock_irq(&pdrvdata_lock); /* Disable interrupts for vqs */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); /* Finish up work that's lined up */ if (use_multiport(portdev)) cancel_work_sync(&portdev->control_work); @@ -2139,7 +2139,7 @@ static int virtcons_freeze(struct virtio_device *vdev) portdev = vdev->priv; - vdev->config->reset(vdev); + virtio_reset_device(vdev); if (use_multiport(portdev)) virtqueue_disable_cb(portdev->c_ivq); diff --git a/drivers/crypto/virtio/virtio_crypto_core.c b/drivers/crypto/virtio/virtio_crypto_core.c index e2375d992308..8e977b7627cb 100644 --- a/drivers/crypto/virtio/virtio_crypto_core.c +++ b/drivers/crypto/virtio/virtio_crypto_core.c @@ -404,7 +404,7 @@ static int virtcrypto_probe(struct virtio_device *vdev) free_engines: virtcrypto_clear_crypto_engines(vcrypto); free_vqs: - vcrypto->vdev->config->reset(vdev); + virtio_reset_device(vdev); virtcrypto_del_vqs(vcrypto); free_dev: virtcrypto_devmgr_rm_dev(vcrypto); @@ -436,7 +436,7 @@ static void virtcrypto_remove(struct virtio_device *vdev) if (virtcrypto_dev_started(vcrypto)) virtcrypto_dev_stop(vcrypto); - vdev->config->reset(vdev); + virtio_reset_device(vdev); virtcrypto_free_unused_reqs(vcrypto); virtcrypto_clear_crypto_engines(vcrypto); virtcrypto_del_vqs(vcrypto); @@ -456,7 +456,7 @@ static int virtcrypto_freeze(struct virtio_device *vdev) { struct virtio_crypto *vcrypto = vdev->priv; - vdev->config->reset(vdev); + virtio_reset_device(vdev); virtcrypto_free_unused_reqs(vcrypto); if (virtcrypto_dev_started(vcrypto)) virtcrypto_dev_stop(vcrypto); @@ -492,7 +492,7 @@ static int virtcrypto_restore(struct virtio_device *vdev) free_engines: virtcrypto_clear_crypto_engines(vcrypto); free_vqs: - vcrypto->vdev->config->reset(vdev); + virtio_reset_device(vdev); virtcrypto_del_vqs(vcrypto); return err; } diff --git a/drivers/firmware/arm_scmi/virtio.c b/drivers/firmware/arm_scmi/virtio.c index 11e8efb71375..6b8d93fe8848 100644 --- a/drivers/firmware/arm_scmi/virtio.c +++ b/drivers/firmware/arm_scmi/virtio.c @@ -452,7 +452,7 @@ static void scmi_vio_remove(struct virtio_device *vdev) * outstanding message on any vqueue to be ignored by complete_cb: now * we can just stop processing buffers and destroy the vqueues. */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); /* Ensure scmi_vdev is visible as NULL */ smp_store_mb(scmi_vdev, NULL); diff --git a/drivers/gpio/gpio-virtio.c b/drivers/gpio/gpio-virtio.c index d24f1c9264bc..5029f01966f4 100644 --- a/drivers/gpio/gpio-virtio.c +++ b/drivers/gpio/gpio-virtio.c @@ -203,7 +203,7 @@ static void virtio_gpio_request_vq(struct virtqueue *vq) static void virtio_gpio_free_vqs(struct virtio_device *vdev) { - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); } diff --git a/drivers/gpu/drm/virtio/virtgpu_kms.c b/drivers/gpu/drm/virtio/virtgpu_kms.c index f3379059f324..6aa605b8d3a1 100644 --- a/drivers/gpu/drm/virtio/virtgpu_kms.c +++ b/drivers/gpu/drm/virtio/virtgpu_kms.c @@ -257,7 +257,7 @@ void virtio_gpu_deinit(struct drm_device *dev) flush_work(&vgdev->ctrlq.dequeue_work); flush_work(&vgdev->cursorq.dequeue_work); flush_work(&vgdev->config_changed_work); - vgdev->vdev->config->reset(vgdev->vdev); + virtio_reset_device(vgdev->vdev); vgdev->vdev->config->del_vqs(vgdev->vdev); } diff --git a/drivers/i2c/busses/i2c-virtio.c b/drivers/i2c/busses/i2c-virtio.c index f10a603b13fb..eb3261ac64dc 100644 --- a/drivers/i2c/busses/i2c-virtio.c +++ b/drivers/i2c/busses/i2c-virtio.c @@ -177,7 +177,7 @@ static int virtio_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, static void virtio_i2c_del_vqs(struct virtio_device *vdev) { - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); } diff --git a/drivers/iommu/virtio-iommu.c b/drivers/iommu/virtio-iommu.c index 80930ce04a16..1d4e1e7cf175 100644 --- a/drivers/iommu/virtio-iommu.c +++ b/drivers/iommu/virtio-iommu.c @@ -1115,7 +1115,7 @@ static void viommu_remove(struct virtio_device *vdev) iommu_device_unregister(&viommu->iommu); /* Stop all virtqueues */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); dev_info(&vdev->dev, "device removed\n"); diff --git a/drivers/net/caif/caif_virtio.c b/drivers/net/caif/caif_virtio.c index 91230894692d..444ef6a342f6 100644 --- a/drivers/net/caif/caif_virtio.c +++ b/drivers/net/caif/caif_virtio.c @@ -754,7 +754,7 @@ static void cfv_remove(struct virtio_device *vdev) debugfs_remove_recursive(cfv->debugfs); vringh_kiov_cleanup(&cfv->ctx.riov); - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->vringh_config->del_vrhs(cfv->vdev); cfv->vr_rx = NULL; vdev->config->del_vqs(cfv->vdev); diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 79bd2585ec6b..8c10fcad73a4 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -3274,7 +3274,7 @@ static int virtnet_probe(struct virtio_device *vdev) return 0; free_unregister_netdev: - vi->vdev->config->reset(vdev); + virtio_reset_device(vdev); unregister_netdev(dev); free_failover: @@ -3290,7 +3290,7 @@ static int virtnet_probe(struct virtio_device *vdev) static void remove_vq_common(struct virtnet_info *vi) { - vi->vdev->config->reset(vi->vdev); + virtio_reset_device(vi->vdev); /* Free unused buffers in both send and recv, if any. */ free_unused_bufs(vi); diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 0adae76eb8df..9ee430c1d4a2 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -4369,7 +4369,7 @@ static void remove_vqs(struct virtio_device *vdev) { int i; - vdev->config->reset(vdev); + virtio_reset_device(vdev); for (i = 0; i < ARRAY_SIZE(hwsim_vqs); i++) { struct virtqueue *vq = hwsim_vqs[i]; diff --git a/drivers/nvdimm/virtio_pmem.c b/drivers/nvdimm/virtio_pmem.c index 726c7354d465..995b6cdc67ed 100644 --- a/drivers/nvdimm/virtio_pmem.c +++ b/drivers/nvdimm/virtio_pmem.c @@ -105,7 +105,7 @@ static void virtio_pmem_remove(struct virtio_device *vdev) nvdimm_bus_unregister(nvdimm_bus); vdev->config->del_vqs(vdev); - vdev->config->reset(vdev); + virtio_reset_device(vdev); } static struct virtio_driver virtio_pmem_driver = { diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c index 8e49a3bacfc7..6a11952822df 100644 --- a/drivers/rpmsg/virtio_rpmsg_bus.c +++ b/drivers/rpmsg/virtio_rpmsg_bus.c @@ -1015,7 +1015,7 @@ static void rpmsg_remove(struct virtio_device *vdev) size_t total_buf_space = vrp->num_bufs * vrp->buf_size; int ret; - vdev->config->reset(vdev); + virtio_reset_device(vdev); ret = device_for_each_child(&vdev->dev, NULL, rpmsg_remove_device); if (ret) diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index 07d0250f17c3..f2502a8a5213 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -778,7 +778,7 @@ static void virtscsi_init_vq(struct virtio_scsi_vq *virtscsi_vq, static void virtscsi_remove_vqs(struct virtio_device *vdev) { /* Stop all the virtqueues. */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); } diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 0a5b54034d4b..a67dd0eca578 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -204,6 +204,11 @@ int virtio_finalize_features(struct virtio_device *dev) } EXPORT_SYMBOL_GPL(virtio_finalize_features); +static void virtio_reset_device(struct virtio_device *dev) +{ + dev->config->reset(dev); +} + static int virtio_dev_probe(struct device *_d) { int err, i; diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index c22ff0117b46..f4c34a2a6b8e 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -1056,7 +1056,7 @@ static void remove_common(struct virtio_balloon *vb) return_free_pages_to_mm(vb, ULONG_MAX); /* Now we reset the device so we can clean up the queues. */ - vb->vdev->config->reset(vb->vdev); + virtio_reset_device(vb->vdev); vb->vdev->config->del_vqs(vb->vdev); } diff --git a/drivers/virtio/virtio_input.c b/drivers/virtio/virtio_input.c index ce51ae165943..3aa46703872d 100644 --- a/drivers/virtio/virtio_input.c +++ b/drivers/virtio/virtio_input.c @@ -347,7 +347,7 @@ static void virtinput_remove(struct virtio_device *vdev) spin_unlock_irqrestore(&vi->lock, flags); input_unregister_device(vi->idev); - vdev->config->reset(vdev); + virtio_reset_device(vdev); while ((buf = virtqueue_detach_unused_buf(vi->sts)) != NULL) kfree(buf); vdev->config->del_vqs(vdev); diff --git a/drivers/virtio/virtio_mem.c b/drivers/virtio/virtio_mem.c index bef8ad6bf466..3bab0a625a4b 100644 --- a/drivers/virtio/virtio_mem.c +++ b/drivers/virtio/virtio_mem.c @@ -2722,7 +2722,7 @@ static void virtio_mem_remove(struct virtio_device *vdev) } /* reset the device and cleanup the queues */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); kfree(vm); diff --git a/fs/fuse/virtio_fs.c b/fs/fuse/virtio_fs.c index 0ad89c6629d7..27c3b74070a2 100644 --- a/fs/fuse/virtio_fs.c +++ b/fs/fuse/virtio_fs.c @@ -895,7 +895,7 @@ static int virtio_fs_probe(struct virtio_device *vdev) return 0; out_vqs: - vdev->config->reset(vdev); + virtio_reset_device(vdev); virtio_fs_cleanup_vqs(vdev, fs); kfree(fs->vqs); @@ -927,7 +927,7 @@ static void virtio_fs_remove(struct virtio_device *vdev) list_del_init(&fs->list); virtio_fs_stop_all_queues(fs); virtio_fs_drain_all_queues_locked(fs); - vdev->config->reset(vdev); + virtio_reset_device(vdev); virtio_fs_cleanup_vqs(vdev, fs); vdev->priv = NULL; diff --git a/include/linux/virtio.h b/include/linux/virtio.h index 41edbc01ffa4..72292a62cd90 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -138,6 +138,7 @@ int virtio_finalize_features(struct virtio_device *dev); int virtio_device_freeze(struct virtio_device *dev); int virtio_device_restore(struct virtio_device *dev); #endif +void virtio_reset_device(struct virtio_device *dev); size_t virtio_max_dma_size(struct virtio_device *vdev); diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index 490a4c900339..19c69821dd04 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -721,7 +721,7 @@ static void p9_virtio_remove(struct virtio_device *vdev) mutex_unlock(&virtio_9p_lock); - vdev->config->reset(vdev); + virtio_reset_device(vdev); vdev->config->del_vqs(vdev); sysfs_remove_file(&(vdev->dev.kobj), &dev_attr_mount_tag.attr); diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c index 4f7c99dfd16c..fb3302fff627 100644 --- a/net/vmw_vsock/virtio_transport.c +++ b/net/vmw_vsock/virtio_transport.c @@ -665,7 +665,7 @@ static void virtio_vsock_remove(struct virtio_device *vdev) vsock_for_each_connected_socket(virtio_vsock_reset_sock); /* Stop all work handlers to make sure no one is accessing the device, - * so we can safely call vdev->config->reset(). + * so we can safely call virtio_reset_device(). */ mutex_lock(&vsock->rx_lock); vsock->rx_run = false; @@ -682,7 +682,7 @@ static void virtio_vsock_remove(struct virtio_device *vdev) /* Flush all device writes and interrupts, device will not use any * more buffers. */ - vdev->config->reset(vdev); + virtio_reset_device(vdev); mutex_lock(&vsock->rx_lock); while ((pkt = virtqueue_detach_unused_buf(vsock->vqs[VSOCK_VQ_RX]))) diff --git a/sound/virtio/virtio_card.c b/sound/virtio/virtio_card.c index 150ab3e37013..e2847c040f75 100644 --- a/sound/virtio/virtio_card.c +++ b/sound/virtio/virtio_card.c @@ -350,7 +350,7 @@ static void virtsnd_remove(struct virtio_device *vdev) snd_card_free(snd->card); vdev->config->del_vqs(vdev); - vdev->config->reset(vdev); + virtio_reset_device(vdev); for (i = 0; snd->substreams && i < snd->nsubstreams; ++i) { struct virtio_pcm_substream *vss = &snd->substreams[i]; @@ -379,7 +379,7 @@ static int virtsnd_freeze(struct virtio_device *vdev) virtsnd_ctl_msg_cancel_all(snd); vdev->config->del_vqs(vdev); - vdev->config->reset(vdev); + virtio_reset_device(vdev); for (i = 0; i < snd->nsubstreams; ++i) cancel_work_sync(&snd->substreams[i].elapsed_period);
This will enable cleanups down the road. The idea is to disable cbs, then add "flush_queued_cbs" callback as a parameter, this way drivers can flush any work queued after callbacks have been disabled. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> --- arch/um/drivers/virt-pci.c | 2 +- drivers/block/virtio_blk.c | 4 ++-- drivers/bluetooth/virtio_bt.c | 2 +- drivers/char/hw_random/virtio-rng.c | 2 +- drivers/char/virtio_console.c | 4 ++-- drivers/crypto/virtio/virtio_crypto_core.c | 8 ++++---- drivers/firmware/arm_scmi/virtio.c | 2 +- drivers/gpio/gpio-virtio.c | 2 +- drivers/gpu/drm/virtio/virtgpu_kms.c | 2 +- drivers/i2c/busses/i2c-virtio.c | 2 +- drivers/iommu/virtio-iommu.c | 2 +- drivers/net/caif/caif_virtio.c | 2 +- drivers/net/virtio_net.c | 4 ++-- drivers/net/wireless/mac80211_hwsim.c | 2 +- drivers/nvdimm/virtio_pmem.c | 2 +- drivers/rpmsg/virtio_rpmsg_bus.c | 2 +- drivers/scsi/virtio_scsi.c | 2 +- drivers/virtio/virtio.c | 5 +++++ drivers/virtio/virtio_balloon.c | 2 +- drivers/virtio/virtio_input.c | 2 +- drivers/virtio/virtio_mem.c | 2 +- fs/fuse/virtio_fs.c | 4 ++-- include/linux/virtio.h | 1 + net/9p/trans_virtio.c | 2 +- net/vmw_vsock/virtio_transport.c | 4 ++-- sound/virtio/virtio_card.c | 4 ++-- 26 files changed, 39 insertions(+), 33 deletions(-)