| Message ID | 20211017204036.2761122-1-bjorn.andersson@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: defconfig: Enable Qualcomm LMH driver | expand |
Hi, On Mon, 18 Oct 2021 at 02:08, Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > > With the introduction of LMH in '36c6581214c4 ("arm64: dts: qcom: > sdm845: Add support for LMh node")' the CPUfreq gained a reference for > the two interrupts from the LMh. This means that if the LMh driver isn't > enabled CPUfreq will not probe and there's no frequency scaling. > > Enable LMh to make CPUfreq functional again on SDM845. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > arch/arm64/configs/defconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > index 86224aa3a74b..0ae6cd2748d2 100644 > --- a/arch/arm64/configs/defconfig > +++ b/arch/arm64/configs/defconfig > @@ -577,6 +577,7 @@ CONFIG_TEGRA_BPMP_THERMAL=m > CONFIG_TEGRA_SOCTHERM=m > CONFIG_QCOM_TSENS=y > CONFIG_QCOM_SPMI_TEMP_ALARM=m > +CONFIG_QCOM_LMH=m > CONFIG_UNIPHIER_THERMAL=y > CONFIG_WATCHDOG=y > CONFIG_SL28CPLD_WATCHDOG=m > -- Tested on SA8155p-ADP board, so: Reviewed-and-Tested-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Regards.
On Mon, 18 Oct 2021 at 10:47, Bhupesh Sharma <bhupesh.sharma@linaro.org> wrote: > > Hi, > > On Mon, 18 Oct 2021 at 02:08, Bjorn Andersson > <bjorn.andersson@linaro.org> wrote: > > > > With the introduction of LMH in '36c6581214c4 ("arm64: dts: qcom: > > sdm845: Add support for LMh node")' the CPUfreq gained a reference for > > the two interrupts from the LMh. This means that if the LMh driver isn't > > enabled CPUfreq will not probe and there's no frequency scaling. > > > > Enable LMh to make CPUfreq functional again on SDM845. > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > --- > > arch/arm64/configs/defconfig | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > > index 86224aa3a74b..0ae6cd2748d2 100644 > > --- a/arch/arm64/configs/defconfig > > +++ b/arch/arm64/configs/defconfig > > @@ -577,6 +577,7 @@ CONFIG_TEGRA_BPMP_THERMAL=m > > CONFIG_TEGRA_SOCTHERM=m > > CONFIG_QCOM_TSENS=y > > CONFIG_QCOM_SPMI_TEMP_ALARM=m > > +CONFIG_QCOM_LMH=m > > CONFIG_UNIPHIER_THERMAL=y > > CONFIG_WATCHDOG=y > > CONFIG_SL28CPLD_WATCHDOG=m > > -- > > Tested on SA8155p-ADP board, so: Sorry, a typo here, I meant the patch was tested on the sdm845-mtp board here :) > Reviewed-and-Tested-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > > Regards.
On 10/17/21 3:40 PM, Bjorn Andersson wrote: > With the introduction of LMH in '36c6581214c4 ("arm64: dts: qcom: > sdm845: Add support for LMh node")' the CPUfreq gained a reference for > the two interrupts from the LMh. This means that if the LMh driver isn't > enabled CPUfreq will not probe and there's no frequency scaling. > > Enable LMh to make CPUfreq functional again on SDM845. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > arch/arm64/configs/defconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig > index 86224aa3a74b..0ae6cd2748d2 100644 > --- a/arch/arm64/configs/defconfig > +++ b/arch/arm64/configs/defconfig > @@ -577,6 +577,7 @@ CONFIG_TEGRA_BPMP_THERMAL=m > CONFIG_TEGRA_SOCTHERM=m > CONFIG_QCOM_TSENS=y > CONFIG_QCOM_SPMI_TEMP_ALARM=m > +CONFIG_QCOM_LMH=m > CONFIG_UNIPHIER_THERMAL=y > CONFIG_WATCHDOG=y > CONFIG_SL28CPLD_WATCHDOG=m Tested on the Lenovo Yoga C630 Tested-By: Steev Klimaszewski <steev@kali.org>
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 86224aa3a74b..0ae6cd2748d2 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -577,6 +577,7 @@ CONFIG_TEGRA_BPMP_THERMAL=m CONFIG_TEGRA_SOCTHERM=m CONFIG_QCOM_TSENS=y CONFIG_QCOM_SPMI_TEMP_ALARM=m +CONFIG_QCOM_LMH=m CONFIG_UNIPHIER_THERMAL=y CONFIG_WATCHDOG=y CONFIG_SL28CPLD_WATCHDOG=m
With the introduction of LMH in '36c6581214c4 ("arm64: dts: qcom: sdm845: Add support for LMh node")' the CPUfreq gained a reference for the two interrupts from the LMh. This means that if the LMh driver isn't enabled CPUfreq will not probe and there's no frequency scaling. Enable LMh to make CPUfreq functional again on SDM845. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)