| Message ID | 20211019145919.7327-6-luca@lucaceresoli.net (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Add MAX77714 PMIC minimal driver (RTC and watchdog only) | expand |
On Tue, Oct 19, 2021 at 04:59:15PM +0200, Luca Ceresoli wrote: > Add bindings for the MAX77714 PMIC with GPIO, RTC and watchdog. > > Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> > > --- > > Changes in v2: none > --- > .../bindings/mfd/maxim,max77714.yaml | 58 +++++++++++++++++++ > MAINTAINERS | 5 ++ > 2 files changed, 63 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77714.yaml > > diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml > new file mode 100644 > index 000000000000..2b0ce3b9bc92 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml > @@ -0,0 +1,58 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/maxim,max77714.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated. > + > +maintainers: > + - Luca Ceresoli <luca@lucaceresoli.net> > + > +description: | > + MAX77714 is a Power Management IC with 4 buck regulators, 9 > + low-dropout regulators, 8 GPIOs, RTC and watchdog. Where's the regulators nodes and binding? > + > +properties: > + compatible: > + const: maxim,max77714 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + interrupt-controller: true > + > + "#interrupt-cells": > + const: 2 > + description: > + The first cell is the IRQ number, the second cell is the trigger type. > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-controller > + - "#interrupt-cells" > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + pmic@1c { > + compatible = "maxim,max77714"; > + reg = <0x1c>; > + interrupt-parent = <&gpio2>; > + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index 8d118d7957d2..514ff4a735e5 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -11386,6 +11386,11 @@ F: drivers/power/supply/max77650-charger.c > F: drivers/regulator/max77650-regulator.c > F: include/linux/mfd/max77650.h > > +MAXIM MAX77714 PMIC MFD DRIVER > +M: Luca Ceresoli <luca@lucaceresoli.net> > +S: Maintained > +F: Documentation/devicetree/bindings/mfd/maxim,max77714.yaml > + > MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER > M: Javier Martinez Canillas <javier@dowhile0.org> > L: linux-kernel@vger.kernel.org > -- > 2.25.1 > >
Hi Rob, On 27/10/21 05:17, Rob Herring wrote: > On Tue, Oct 19, 2021 at 04:59:15PM +0200, Luca Ceresoli wrote: >> Add bindings for the MAX77714 PMIC with GPIO, RTC and watchdog. >> >> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> >> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> >> >> --- >> >> Changes in v2: none >> --- >> .../bindings/mfd/maxim,max77714.yaml | 58 +++++++++++++++++++ >> MAINTAINERS | 5 ++ >> 2 files changed, 63 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77714.yaml >> >> diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml >> new file mode 100644 >> index 000000000000..2b0ce3b9bc92 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml >> @@ -0,0 +1,58 @@ >> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/mfd/maxim,max77714.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated. >> + >> +maintainers: >> + - Luca Ceresoli <luca@lucaceresoli.net> >> + >> +description: | >> + MAX77714 is a Power Management IC with 4 buck regulators, 9 >> + low-dropout regulators, 8 GPIOs, RTC and watchdog. > > Where's the regulators nodes and binding? As discussed for the v1 patches [0]: No plan to add them, sorry. I know, complete bindings are better than incomplete bindings. But in the foreseeable future I don't need to do anything on the regulators (even though it might happen at some point). And since their setting is possibly non trivial, I'm not going to study them to write a complete bindings document and then make no use of it. Is it a problem for you? [0] https://lore.kernel.org/lkml/4fc0fe37-1a25-4058-6326-a14e32ef18f5@lucaceresoli.net/
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml new file mode 100644 index 000000000000..2b0ce3b9bc92 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77714.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated. + +maintainers: + - Luca Ceresoli <luca@lucaceresoli.net> + +description: | + MAX77714 is a Power Management IC with 4 buck regulators, 9 + low-dropout regulators, 8 GPIOs, RTC and watchdog. + +properties: + compatible: + const: maxim,max77714 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + description: + The first cell is the IRQ number, the second cell is the trigger type. + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@1c { + compatible = "maxim,max77714"; + reg = <0x1c>; + interrupt-parent = <&gpio2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 8d118d7957d2..514ff4a735e5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11386,6 +11386,11 @@ F: drivers/power/supply/max77650-charger.c F: drivers/regulator/max77650-regulator.c F: include/linux/mfd/max77650.h +MAXIM MAX77714 PMIC MFD DRIVER +M: Luca Ceresoli <luca@lucaceresoli.net> +S: Maintained +F: Documentation/devicetree/bindings/mfd/maxim,max77714.yaml + MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER M: Javier Martinez Canillas <javier@dowhile0.org> L: linux-kernel@vger.kernel.org