| Message ID | 4c12452739c0d7fa1c6a4f5998515767@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [v16] Bluetooth: btusb: Add support using different nvm for variant WCN6855 controller | expand |
On Fri, Oct 29, 2021 at 11:21:21AM +0800, tjiang@codeaurora.org wrote: > the RF performance of wcn6855 soc chip from different foundries will be > difference, so we should use different nvm to configure them. > > Signed-off-by: Tim Jiang <tjiang@codeaurora.org> > --- > drivers/bluetooth/btusb.c | 54 > +++++++++++++++++++++++++++++++++++------------ > 1 file changed, 40 insertions(+), 14 deletions(-) > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > index 87b71740fad8..16bb5de3ce2f 100644 > --- a/drivers/bluetooth/btusb.c > +++ b/drivers/bluetooth/btusb.c > @@ -3195,6 +3195,9 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev > *hdev, > #define QCA_DFU_TIMEOUT 3000 > #define QCA_FLAG_MULTI_NVM 0x80 > > +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200 > +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211 > + > struct qca_version { > __le32 rom_version; > __le32 patch_version; > @@ -3226,6 +3229,7 @@ static const struct qca_device_info > qca_devices_table[] = { > { 0x00000302, 28, 4, 16 }, /* Rome 3.2 */ > { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */ > { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */ > + { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */ > }; > > static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request, > @@ -3380,6 +3384,41 @@ static int btusb_setup_qca_load_rampatch(struct > hci_dev *hdev, > return err; > } > > +static void btusb_generate_qca_nvm_name(char *fwname, > + size_t max_size, > + const struct qca_version *ver) > +{ > + u32 rom_version = le32_to_cpu(ver->rom_version); > + u16 flag = le16_to_cpu(ver->flag); > + > + if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) { > + u16 board_id = le16_to_cpu(ver->board_id); > + const char *variant ; Remove blank before the semicolon. Besides that: Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Hi Tim, > the RF performance of wcn6855 soc chip from different foundries will be > difference, so we should use different nvm to configure them. > > Signed-off-by: Tim Jiang <tjiang@codeaurora.org> > --- > drivers/bluetooth/btusb.c | 54 +++++++++++++++++++++++++++++++++++------------ > 1 file changed, 40 insertions(+), 14 deletions(-) patch has been applied to bluetooth-next tree. Regards Marcel
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 87b71740fad8..16bb5de3ce2f 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -3195,6 +3195,9 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev, #define QCA_DFU_TIMEOUT 3000 #define QCA_FLAG_MULTI_NVM 0x80 +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200 +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211 + struct qca_version { __le32 rom_version;
the RF performance of wcn6855 soc chip from different foundries will be difference, so we should use different nvm to configure them. Signed-off-by: Tim Jiang <tjiang@codeaurora.org> --- drivers/bluetooth/btusb.c | 54 +++++++++++++++++++++++++++++++++++------------ 1 file changed, 40 insertions(+), 14 deletions(-) __le32 patch_version; @@ -3226,6 +3229,7 @@ static const struct qca_device_info qca_devices_table[] = { { 0x00000302, 28, 4, 16 }, /* Rome 3.2 */ { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */ { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */ + { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */ }; static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request, @@ -3380,6 +3384,41 @@ static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev, return err; } +static void btusb_generate_qca_nvm_name(char *fwname, + size_t max_size, + const struct qca_version *ver) +{ + u32 rom_version = le32_to_cpu(ver->rom_version); + u16 flag = le16_to_cpu(ver->flag); + + if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) { + u16 board_id = le16_to_cpu(ver->board_id); + const char *variant ; + + switch (le32_to_cpu(ver->ram_version)) { + case WCN6855_2_0_RAM_VERSION_GF: + case WCN6855_2_1_RAM_VERSION_GF: + variant = "_gf"; + break; + default: + variant = ""; + break; + } + + if (board_id == 0) { + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s.bin", + rom_version, variant); + } else { + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s_%04x.bin", + rom_version, variant, board_id); + } + } else { + snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin", + rom_version); + } + +} + static int btusb_setup_qca_load_nvm(struct hci_dev *hdev, struct qca_version *ver, const struct qca_device_info *info) @@ -3388,20 +3427,7 @@ static int btusb_setup_qca_load_nvm(struct hci_dev *hdev, char fwname[64]; int err; - if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) { - /* if boardid equal 0, use default nvm without surfix */ - if (le16_to_cpu(ver->board_id) == 0x0) { - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin", - le32_to_cpu(ver->rom_version)); - } else { - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin", - le32_to_cpu(ver->rom_version), - le16_to_cpu(ver->board_id)); - } - } else { - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin", - le32_to_cpu(ver->rom_version)); - } + btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver); err = request_firmware(&fw, fwname, &hdev->dev); if (err) {