Message ID | 20211001101234.4247-8-arnaud.pouliquen@foss.st.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | remoteproc: restructure the remoteproc VirtIO device | expand |
Good morning, On Fri, Oct 01, 2021 at 12:12:34PM +0200, Arnaud Pouliquen wrote: > Migrate from the rvdev device to the rvdev platform device. > From this patch, when a vdev resource is found in the resource table > the remoteproc core register a platform device. > > All reference to the rvdev->dev has been updated to rvdev-pdev->dev > > The use of kref counter is replaced by get/put_device on the remoteproc > virtio device. > > Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> > --- > drivers/remoteproc/remoteproc_core.c | 49 +++++++------ > drivers/remoteproc/remoteproc_internal.h | 16 ---- > drivers/remoteproc/remoteproc_virtio.c | 93 ++++++------------------ > include/linux/remoteproc.h | 4 - > 4 files changed, 50 insertions(+), 112 deletions(-) > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > index 67ccd088db8f..d9256db8b130 100644 > --- a/drivers/remoteproc/remoteproc_core.c > +++ b/drivers/remoteproc/remoteproc_core.c > @@ -467,6 +467,8 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > { > struct fw_rsc_vdev *rsc = ptr; > struct device *dev = &rproc->dev; > + struct rproc_vdev_data vdev_data; > + struct platform_device *pdev; > struct rproc_vdev *rvdev; > int i, ret; > > @@ -486,28 +488,34 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > dev_dbg(dev, "vdev rsc: id %d, dfeatures 0x%x, cfg len %d, %d vrings\n", > rsc->id, rsc->dfeatures, rsc->config_len, rsc->num_of_vrings); > > - /* we currently support only two vrings per rvdev */ > - if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) { > - dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings); > - return -EINVAL; > - } > + /* platform data of the new rvdev platform */ This comment is very confusing... Shouldn't it be "rvdev device" instead? > + vdev_data.rsc_offset = offset; > + vdev_data.id = rsc->id; > + vdev_data.index = rproc->nb_vdev; > > - rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL); > - if (!rvdev) > - return -ENOMEM; > - > - kref_init(&rvdev->refcount); > - > - rvdev->id = rsc->id; > - rvdev->rproc = rproc; > - rvdev->index = rproc->nb_vdev; > + pdev = rproc_virtio_register_device(rproc, &vdev_data); > + if (PTR_ERR_OR_ZERO(pdev)) { > + dev_err(rproc->dev.parent, > + "failed to create rproc-virtio device\n"); > + return PTR_ERR_OR_ZERO(pdev); > + } > > - ret = rproc_rvdev_add_device(rvdev); > - if (ret) > - return ret; > + /* If we made it to this point the remote proc virtio platform at been probed */ This too is just as confusing. I have to guess you are referring to rproc_virtio_probe(). All that guessing is very time consuming and makes reviewing this work quite difficult. I will review this set one more time but from an overall perspective I think it is holding together. That said I would like to see what other people think, especially Christoph. More comments to come... Thanks, Mathieu > + rvdev = platform_get_drvdata(pdev); > + if (WARN_ON(!rvdev)) { > + ret = -EINVAL; > + goto free_rvdev; > + } > > rproc->nb_vdev++; > > + /* we currently support only two vrings per rvdev */ > + if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) { > + dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings); > + ret = -EINVAL; > + goto free_rvdev; > + } > + > /* parse the vrings */ > for (i = 0; i < rsc->num_of_vrings; i++) { > ret = rproc_parse_vring(rvdev, rsc, i); > @@ -515,9 +523,6 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > goto free_rvdev; > } > > - /* remember the resource offset*/ > - rvdev->rsc_offset = offset; > - > /* allocate the vring resources */ > for (i = 0; i < rsc->num_of_vrings; i++) { > ret = rproc_alloc_vring(rvdev, i); > @@ -531,7 +536,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > for (i--; i >= 0; i--) > rproc_free_vring(&rvdev->vring[i]); > free_rvdev: > - device_unregister(&rvdev->dev); > + rproc_virtio_unregister_device(rvdev); > return ret; > } > > @@ -1270,7 +1275,7 @@ void rproc_resource_cleanup(struct rproc *rproc) > > /* clean up remote vdev entries */ > list_for_each_entry_safe(rvdev, rvtmp, &rproc->rvdevs, node) > - kref_put(&rvdev->refcount, rproc_vdev_release); > + rproc_virtio_unregister_device(rvdev); > > rproc_coredump_cleanup(rproc); > } > diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h > index 0bb1b14e5136..2f68e7380c77 100644 > --- a/drivers/remoteproc/remoteproc_internal.h > +++ b/drivers/remoteproc/remoteproc_internal.h > @@ -38,12 +38,10 @@ int rproc_of_parse_firmware(struct device *dev, int index, > /* from remoteproc_virtio.c */ > #if IS_ENABLED(CONFIG_REMOTEPROC_VIRTIO) > > -int rproc_rvdev_add_device(struct rproc_vdev *rvdev); > struct platform_device * > rproc_virtio_register_device(struct rproc *rproc, struct rproc_vdev_data *vdev_data); > void rproc_virtio_unregister_device(struct rproc_vdev *rvdev); > irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id); > -void rproc_vdev_release(struct kref *ref); > > #else > > @@ -59,14 +57,6 @@ static inline void rproc_virtio_unregister_device(struct rproc_vdev *rvdev) > WARN_ON(1); > } > > -int rproc_rvdev_add_device(struct rproc_vdev *rvdev) > -{ > - /* This shouldn't be possible */ > - WARN_ON(1); > - > - return -ENXIO; > -} > - > static inline irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id) > { > /* This shouldn't be possible */ > @@ -75,12 +65,6 @@ static inline irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id) > return IRQ_NONE; > } > > -static inline void rproc_vdev_release(struct kref *ref) > -{ > - /* This shouldn't be possible */ > - WARN_ON(1); > -} > - > #endif > > /* from remoteproc_debugfs.c */ > diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c > index 7188fb8ce40f..34781a2136e6 100644 > --- a/drivers/remoteproc/remoteproc_virtio.c > +++ b/drivers/remoteproc/remoteproc_virtio.c > @@ -29,7 +29,11 @@ > > static struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev) > { > - return container_of(vdev->dev.parent, struct rproc_vdev, dev); > + struct platform_device *pdev; > + > + pdev = container_of(vdev->dev.parent, struct platform_device, dev); > + > + return platform_get_drvdata(pdev); > } > > static struct rproc *vdev_to_rproc(struct virtio_device *vdev) > @@ -343,13 +347,10 @@ static void rproc_virtio_dev_release(struct device *dev) > { > struct virtio_device *vdev = dev_to_virtio(dev); > struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); > - struct rproc *rproc = vdev_to_rproc(vdev); > > kfree(vdev); > > - kref_put(&rvdev->refcount, rproc_vdev_release); > - > - put_device(&rproc->dev); > + put_device(&rvdev->pdev->dev); > } > > /** > @@ -365,7 +366,7 @@ static void rproc_virtio_dev_release(struct device *dev) > static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) > { > struct rproc *rproc = rvdev->rproc; > - struct device *dev = &rvdev->dev; > + struct device *dev = &rvdev->pdev->dev; > struct virtio_device *vdev; > struct rproc_mem_entry *mem; > int ret; > @@ -436,17 +437,15 @@ static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) > vdev->dev.release = rproc_virtio_dev_release; > > /* > - * We're indirectly making a non-temporary copy of the rproc pointer > + * We're indirectly making a non-temporary copy of the rvdev pointer > * here, because drivers probed with this vdev will indirectly > * access the wrapping rproc. > * > - * Therefore we must increment the rproc refcount here, and decrement > + * Therefore we must increment the rvdev refcount here, and decrement > * it _only_ when the vdev is released. > */ > - get_device(&rproc->dev); > + get_device(dev); > > - /* Reference the vdev and vring allocations */ > - kref_get(&rvdev->refcount); > > ret = register_virtio_device(vdev); > if (ret) { > @@ -488,57 +487,33 @@ static int rproc_vdev_do_start(struct rproc_subdev *subdev) > static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed) > { > struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev); > + struct device *dev = &rvdev->pdev->dev; > int ret; > > - ret = device_for_each_child(&rvdev->dev, NULL, rproc_remove_virtio_dev); > + ret = device_for_each_child(dev, NULL, rproc_remove_virtio_dev); > if (ret) > - dev_warn(&rvdev->dev, "can't remove vdev child device: %d\n", ret); > -} > - > -/** > - * rproc_rvdev_release() - release the existence of a rvdev > - * > - * @dev: the subdevice's dev > - */ > -static void rproc_rvdev_release(struct device *dev) > -{ > - struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev); > - > - of_reserved_mem_device_release(dev); > - > - kfree(rvdev); > + dev_warn(dev, "can't remove vdev child device: %d\n", ret); > } > > -int rproc_rvdev_add_device(struct rproc_vdev *rvdev) > +static int rproc_rvdev_add_device(struct rproc_vdev *rvdev) > { > struct rproc *rproc = rvdev->rproc; > - char name[16]; > + struct device *dev = &rvdev->pdev->dev; > int ret; > > - snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index); > - rvdev->dev.parent = &rproc->dev; > - ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent); > + ret = copy_dma_range_map(dev, rproc->dev.parent); > if (ret) > return ret; > > - rvdev->dev.release = rproc_rvdev_release; > - dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name); > - dev_set_drvdata(&rvdev->dev, rvdev); > > - ret = device_register(&rvdev->dev); > - if (ret) { > - put_device(&rvdev->dev); > - return ret; > - } > /* Make device dma capable by inheriting from parent's capabilities */ > - set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent)); > + set_dma_ops(dev, get_dma_ops(rproc->dev.parent)); > > - ret = dma_coerce_mask_and_coherent(&rvdev->dev, > - dma_get_mask(rproc->dev.parent)); > + ret = dma_coerce_mask_and_coherent(dev, dma_get_mask(rproc->dev.parent)); > if (ret) { > - dev_warn(&rvdev->dev, > - "Failed to set DMA mask %llx. Trying to continue... %x\n", > + dev_warn(dev, "Failed to set DMA mask %llx. Trying to continue... %x\n", > dma_get_mask(rproc->dev.parent), ret); > + return ret; > } > > rproc_register_rvdev(rvdev); > @@ -548,30 +523,9 @@ int rproc_rvdev_add_device(struct rproc_vdev *rvdev) > > rproc_add_subdev(rproc, &rvdev->subdev); > > - return 0; > -} > - > -static void rproc_rvdev_remove_device(struct rproc_vdev *rvdev) > -{ > - struct rproc *rproc = rvdev->rproc; > - > - rproc_remove_subdev(rproc, &rvdev->subdev); > - rproc_unregister_rvdev(rvdev); > - device_unregister(&rvdev->dev); > -} > - > -void rproc_vdev_release(struct kref *ref) > -{ > - struct rproc_vdev *rvdev = container_of(ref, struct rproc_vdev, refcount); > - struct rproc_vring *rvring; > - int id; > + dev_dbg(dev, "virtio dev %d added\n", rvdev->index); > > - for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) { > - rvring = &rvdev->vring[id]; > - rproc_free_vring(rvring); > - } > - > - rproc_rvdev_remove_device(rvdev); > + return 0; > } > > /** > @@ -590,8 +544,7 @@ rproc_virtio_register_device(struct rproc *rproc, struct rproc_vdev_data *vdev_d > pdev = platform_device_register_data(dev, "rproc-virtio", vdev_data->index, vdev_data, > sizeof(*vdev_data)); > if (PTR_ERR_OR_ZERO(pdev)) { > - dev_err(rproc->dev.parent, > - "failed to create rproc-virtio device\n"); > + dev_err(rproc->dev.parent, "failed to create rproc-virtio device\n"); > } > > return pdev; > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h > index 542a3d4664f2..7951a3e2b62a 100644 > --- a/include/linux/remoteproc.h > +++ b/include/linux/remoteproc.h > @@ -614,10 +614,8 @@ struct rproc_vring { > > /** > * struct rproc_vdev - remoteproc state for a supported virtio device > - * @refcount: reference counter for the vdev and vring allocations > * @subdev: handle for registering the vdev as a rproc subdevice > * @pdev: remoteproc virtio platform device > - * @dev: device struct used for reference count semantics > * @id: virtio device id (as in virtio_ids.h) > * @node: list node > * @rproc: the rproc handle > @@ -626,11 +624,9 @@ struct rproc_vring { > * @index: vdev position versus other vdev declared in resource table > */ > struct rproc_vdev { > - struct kref refcount; > > struct rproc_subdev subdev; > struct platform_device *pdev; > - struct device dev; > > unsigned int id; > struct list_head node; > -- > 2.17.1 >
On Fri, Oct 01, 2021 at 12:12:34PM +0200, Arnaud Pouliquen wrote: > Migrate from the rvdev device to the rvdev platform device. > From this patch, when a vdev resource is found in the resource table > the remoteproc core register a platform device. > > All reference to the rvdev->dev has been updated to rvdev-pdev->dev > > The use of kref counter is replaced by get/put_device on the remoteproc > virtio device. > > Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> > --- > drivers/remoteproc/remoteproc_core.c | 49 +++++++------ > drivers/remoteproc/remoteproc_internal.h | 16 ---- > drivers/remoteproc/remoteproc_virtio.c | 93 ++++++------------------ > include/linux/remoteproc.h | 4 - > 4 files changed, 50 insertions(+), 112 deletions(-) > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > index 67ccd088db8f..d9256db8b130 100644 > --- a/drivers/remoteproc/remoteproc_core.c > +++ b/drivers/remoteproc/remoteproc_core.c > @@ -467,6 +467,8 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > { > struct fw_rsc_vdev *rsc = ptr; > struct device *dev = &rproc->dev; > + struct rproc_vdev_data vdev_data; > + struct platform_device *pdev; > struct rproc_vdev *rvdev; > int i, ret; > > @@ -486,28 +488,34 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > dev_dbg(dev, "vdev rsc: id %d, dfeatures 0x%x, cfg len %d, %d vrings\n", > rsc->id, rsc->dfeatures, rsc->config_len, rsc->num_of_vrings); > > - /* we currently support only two vrings per rvdev */ > - if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) { > - dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings); > - return -EINVAL; > - } > + /* platform data of the new rvdev platform */ > + vdev_data.rsc_offset = offset; > + vdev_data.id = rsc->id; > + vdev_data.index = rproc->nb_vdev; > > - rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL); > - if (!rvdev) > - return -ENOMEM; > - > - kref_init(&rvdev->refcount); > - > - rvdev->id = rsc->id; > - rvdev->rproc = rproc; > - rvdev->index = rproc->nb_vdev; > + pdev = rproc_virtio_register_device(rproc, &vdev_data); > + if (PTR_ERR_OR_ZERO(pdev)) { > + dev_err(rproc->dev.parent, > + "failed to create rproc-virtio device\n"); > + return PTR_ERR_OR_ZERO(pdev); > + } > > - ret = rproc_rvdev_add_device(rvdev); > - if (ret) > - return ret; > + /* If we made it to this point the remote proc virtio platform at been probed */ > + rvdev = platform_get_drvdata(pdev); > + if (WARN_ON(!rvdev)) { > + ret = -EINVAL; > + goto free_rvdev; > + } > > rproc->nb_vdev++; > > + /* we currently support only two vrings per rvdev */ > + if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) { > + dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings); > + ret = -EINVAL; > + goto free_rvdev; > + } > + > /* parse the vrings */ > for (i = 0; i < rsc->num_of_vrings; i++) { > ret = rproc_parse_vring(rvdev, rsc, i); > @@ -515,9 +523,6 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > goto free_rvdev; > } > > - /* remember the resource offset*/ > - rvdev->rsc_offset = offset; > - > /* allocate the vring resources */ > for (i = 0; i < rsc->num_of_vrings; i++) { > ret = rproc_alloc_vring(rvdev, i); > @@ -531,7 +536,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > for (i--; i >= 0; i--) > rproc_free_vring(&rvdev->vring[i]); > free_rvdev: > - device_unregister(&rvdev->dev); > + rproc_virtio_unregister_device(rvdev); > return ret; > } I have made it up to here but running out of time for this patchset. I will review the rest in another revision. I haven't found a justification for rproc_register_rvdev() and rproc_unregister_rvdev(). Am I missing something or they can simply be removed and the list manipulations done in the code as it currently is? Thanks, Mathieu > > @@ -1270,7 +1275,7 @@ void rproc_resource_cleanup(struct rproc *rproc) > > /* clean up remote vdev entries */ > list_for_each_entry_safe(rvdev, rvtmp, &rproc->rvdevs, node) > - kref_put(&rvdev->refcount, rproc_vdev_release); > + rproc_virtio_unregister_device(rvdev); > > rproc_coredump_cleanup(rproc); > } > diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h > index 0bb1b14e5136..2f68e7380c77 100644 > --- a/drivers/remoteproc/remoteproc_internal.h > +++ b/drivers/remoteproc/remoteproc_internal.h > @@ -38,12 +38,10 @@ int rproc_of_parse_firmware(struct device *dev, int index, > /* from remoteproc_virtio.c */ > #if IS_ENABLED(CONFIG_REMOTEPROC_VIRTIO) > > -int rproc_rvdev_add_device(struct rproc_vdev *rvdev); > struct platform_device * > rproc_virtio_register_device(struct rproc *rproc, struct rproc_vdev_data *vdev_data); > void rproc_virtio_unregister_device(struct rproc_vdev *rvdev); > irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id); > -void rproc_vdev_release(struct kref *ref); > > #else > > @@ -59,14 +57,6 @@ static inline void rproc_virtio_unregister_device(struct rproc_vdev *rvdev) > WARN_ON(1); > } > > -int rproc_rvdev_add_device(struct rproc_vdev *rvdev) > -{ > - /* This shouldn't be possible */ > - WARN_ON(1); > - > - return -ENXIO; > -} > - > static inline irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id) > { > /* This shouldn't be possible */ > @@ -75,12 +65,6 @@ static inline irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id) > return IRQ_NONE; > } > > -static inline void rproc_vdev_release(struct kref *ref) > -{ > - /* This shouldn't be possible */ > - WARN_ON(1); > -} > - > #endif > > /* from remoteproc_debugfs.c */ > diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c > index 7188fb8ce40f..34781a2136e6 100644 > --- a/drivers/remoteproc/remoteproc_virtio.c > +++ b/drivers/remoteproc/remoteproc_virtio.c > @@ -29,7 +29,11 @@ > > static struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev) > { > - return container_of(vdev->dev.parent, struct rproc_vdev, dev); > + struct platform_device *pdev; > + > + pdev = container_of(vdev->dev.parent, struct platform_device, dev); > + > + return platform_get_drvdata(pdev); > } > > static struct rproc *vdev_to_rproc(struct virtio_device *vdev) > @@ -343,13 +347,10 @@ static void rproc_virtio_dev_release(struct device *dev) > { > struct virtio_device *vdev = dev_to_virtio(dev); > struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); > - struct rproc *rproc = vdev_to_rproc(vdev); > > kfree(vdev); > > - kref_put(&rvdev->refcount, rproc_vdev_release); > - > - put_device(&rproc->dev); > + put_device(&rvdev->pdev->dev); > } > > /** > @@ -365,7 +366,7 @@ static void rproc_virtio_dev_release(struct device *dev) > static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) > { > struct rproc *rproc = rvdev->rproc; > - struct device *dev = &rvdev->dev; > + struct device *dev = &rvdev->pdev->dev; > struct virtio_device *vdev; > struct rproc_mem_entry *mem; > int ret; > @@ -436,17 +437,15 @@ static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) > vdev->dev.release = rproc_virtio_dev_release; > > /* > - * We're indirectly making a non-temporary copy of the rproc pointer > + * We're indirectly making a non-temporary copy of the rvdev pointer > * here, because drivers probed with this vdev will indirectly > * access the wrapping rproc. > * > - * Therefore we must increment the rproc refcount here, and decrement > + * Therefore we must increment the rvdev refcount here, and decrement > * it _only_ when the vdev is released. > */ > - get_device(&rproc->dev); > + get_device(dev); > > - /* Reference the vdev and vring allocations */ > - kref_get(&rvdev->refcount); > > ret = register_virtio_device(vdev); > if (ret) { > @@ -488,57 +487,33 @@ static int rproc_vdev_do_start(struct rproc_subdev *subdev) > static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed) > { > struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev); > + struct device *dev = &rvdev->pdev->dev; > int ret; > > - ret = device_for_each_child(&rvdev->dev, NULL, rproc_remove_virtio_dev); > + ret = device_for_each_child(dev, NULL, rproc_remove_virtio_dev); > if (ret) > - dev_warn(&rvdev->dev, "can't remove vdev child device: %d\n", ret); > -} > - > -/** > - * rproc_rvdev_release() - release the existence of a rvdev > - * > - * @dev: the subdevice's dev > - */ > -static void rproc_rvdev_release(struct device *dev) > -{ > - struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev); > - > - of_reserved_mem_device_release(dev); > - > - kfree(rvdev); > + dev_warn(dev, "can't remove vdev child device: %d\n", ret); > } > > -int rproc_rvdev_add_device(struct rproc_vdev *rvdev) > +static int rproc_rvdev_add_device(struct rproc_vdev *rvdev) > { > struct rproc *rproc = rvdev->rproc; > - char name[16]; > + struct device *dev = &rvdev->pdev->dev; > int ret; > > - snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index); > - rvdev->dev.parent = &rproc->dev; > - ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent); > + ret = copy_dma_range_map(dev, rproc->dev.parent); > if (ret) > return ret; > > - rvdev->dev.release = rproc_rvdev_release; > - dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name); > - dev_set_drvdata(&rvdev->dev, rvdev); > > - ret = device_register(&rvdev->dev); > - if (ret) { > - put_device(&rvdev->dev); > - return ret; > - } > /* Make device dma capable by inheriting from parent's capabilities */ > - set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent)); > + set_dma_ops(dev, get_dma_ops(rproc->dev.parent)); > > - ret = dma_coerce_mask_and_coherent(&rvdev->dev, > - dma_get_mask(rproc->dev.parent)); > + ret = dma_coerce_mask_and_coherent(dev, dma_get_mask(rproc->dev.parent)); > if (ret) { > - dev_warn(&rvdev->dev, > - "Failed to set DMA mask %llx. Trying to continue... %x\n", > + dev_warn(dev, "Failed to set DMA mask %llx. Trying to continue... %x\n", > dma_get_mask(rproc->dev.parent), ret); > + return ret; > } > > rproc_register_rvdev(rvdev); > @@ -548,30 +523,9 @@ int rproc_rvdev_add_device(struct rproc_vdev *rvdev) > > rproc_add_subdev(rproc, &rvdev->subdev); > > - return 0; > -} > - > -static void rproc_rvdev_remove_device(struct rproc_vdev *rvdev) > -{ > - struct rproc *rproc = rvdev->rproc; > - > - rproc_remove_subdev(rproc, &rvdev->subdev); > - rproc_unregister_rvdev(rvdev); > - device_unregister(&rvdev->dev); > -} > - > -void rproc_vdev_release(struct kref *ref) > -{ > - struct rproc_vdev *rvdev = container_of(ref, struct rproc_vdev, refcount); > - struct rproc_vring *rvring; > - int id; > + dev_dbg(dev, "virtio dev %d added\n", rvdev->index); > > - for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) { > - rvring = &rvdev->vring[id]; > - rproc_free_vring(rvring); > - } > - > - rproc_rvdev_remove_device(rvdev); > + return 0; > } > > /** > @@ -590,8 +544,7 @@ rproc_virtio_register_device(struct rproc *rproc, struct rproc_vdev_data *vdev_d > pdev = platform_device_register_data(dev, "rproc-virtio", vdev_data->index, vdev_data, > sizeof(*vdev_data)); > if (PTR_ERR_OR_ZERO(pdev)) { > - dev_err(rproc->dev.parent, > - "failed to create rproc-virtio device\n"); > + dev_err(rproc->dev.parent, "failed to create rproc-virtio device\n"); > } > > return pdev; > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h > index 542a3d4664f2..7951a3e2b62a 100644 > --- a/include/linux/remoteproc.h > +++ b/include/linux/remoteproc.h > @@ -614,10 +614,8 @@ struct rproc_vring { > > /** > * struct rproc_vdev - remoteproc state for a supported virtio device > - * @refcount: reference counter for the vdev and vring allocations > * @subdev: handle for registering the vdev as a rproc subdevice > * @pdev: remoteproc virtio platform device > - * @dev: device struct used for reference count semantics > * @id: virtio device id (as in virtio_ids.h) > * @node: list node > * @rproc: the rproc handle > @@ -626,11 +624,9 @@ struct rproc_vring { > * @index: vdev position versus other vdev declared in resource table > */ > struct rproc_vdev { > - struct kref refcount; > > struct rproc_subdev subdev; > struct platform_device *pdev; > - struct device dev; > > unsigned int id; > struct list_head node; > -- > 2.17.1 >
Hi Mathieu On 10/22/21 7:58 PM, Mathieu Poirier wrote: > On Fri, Oct 01, 2021 at 12:12:34PM +0200, Arnaud Pouliquen wrote: >> Migrate from the rvdev device to the rvdev platform device. >> From this patch, when a vdev resource is found in the resource table >> the remoteproc core register a platform device. >> >> All reference to the rvdev->dev has been updated to rvdev-pdev->dev >> >> The use of kref counter is replaced by get/put_device on the remoteproc >> virtio device. >> >> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> >> --- >> drivers/remoteproc/remoteproc_core.c | 49 +++++++------ >> drivers/remoteproc/remoteproc_internal.h | 16 ---- >> drivers/remoteproc/remoteproc_virtio.c | 93 ++++++------------------ >> include/linux/remoteproc.h | 4 - >> 4 files changed, 50 insertions(+), 112 deletions(-) >> >> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c >> index 67ccd088db8f..d9256db8b130 100644 >> --- a/drivers/remoteproc/remoteproc_core.c >> +++ b/drivers/remoteproc/remoteproc_core.c >> @@ -467,6 +467,8 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, >> { >> struct fw_rsc_vdev *rsc = ptr; >> struct device *dev = &rproc->dev; >> + struct rproc_vdev_data vdev_data; >> + struct platform_device *pdev; >> struct rproc_vdev *rvdev; >> int i, ret; >> >> @@ -486,28 +488,34 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, >> dev_dbg(dev, "vdev rsc: id %d, dfeatures 0x%x, cfg len %d, %d vrings\n", >> rsc->id, rsc->dfeatures, rsc->config_len, rsc->num_of_vrings); >> >> - /* we currently support only two vrings per rvdev */ >> - if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) { >> - dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings); >> - return -EINVAL; >> - } >> + /* platform data of the new rvdev platform */ >> + vdev_data.rsc_offset = offset; >> + vdev_data.id = rsc->id; >> + vdev_data.index = rproc->nb_vdev; >> >> - rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL); >> - if (!rvdev) >> - return -ENOMEM; >> - >> - kref_init(&rvdev->refcount); >> - >> - rvdev->id = rsc->id; >> - rvdev->rproc = rproc; >> - rvdev->index = rproc->nb_vdev; >> + pdev = rproc_virtio_register_device(rproc, &vdev_data); >> + if (PTR_ERR_OR_ZERO(pdev)) { >> + dev_err(rproc->dev.parent, >> + "failed to create rproc-virtio device\n"); >> + return PTR_ERR_OR_ZERO(pdev); >> + } >> >> - ret = rproc_rvdev_add_device(rvdev); >> - if (ret) >> - return ret; >> + /* If we made it to this point the remote proc virtio platform at been probed */ >> + rvdev = platform_get_drvdata(pdev); >> + if (WARN_ON(!rvdev)) { >> + ret = -EINVAL; >> + goto free_rvdev; >> + } >> >> rproc->nb_vdev++; >> >> + /* we currently support only two vrings per rvdev */ >> + if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) { >> + dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings); >> + ret = -EINVAL; >> + goto free_rvdev; >> + } >> + >> /* parse the vrings */ >> for (i = 0; i < rsc->num_of_vrings; i++) { >> ret = rproc_parse_vring(rvdev, rsc, i); >> @@ -515,9 +523,6 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, >> goto free_rvdev; >> } >> >> - /* remember the resource offset*/ >> - rvdev->rsc_offset = offset; >> - >> /* allocate the vring resources */ >> for (i = 0; i < rsc->num_of_vrings; i++) { >> ret = rproc_alloc_vring(rvdev, i); >> @@ -531,7 +536,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, >> for (i--; i >= 0; i--) >> rproc_free_vring(&rvdev->vring[i]); >> free_rvdev: >> - device_unregister(&rvdev->dev); >> + rproc_virtio_unregister_device(rvdev); >> return ret; >> } > > I have made it up to here but running out of time for this patchset. I will review > the rest in another revision. I haven't found a justification for > rproc_register_rvdev() and rproc_unregister_rvdev(). Am I missing something or > they can simply be removed and the list manipulations done in the code as it > currently is? > You are right, it seems unnecessary. I need to double check why I introduced these functions, but this needs at least a rational in the commit. I will send a new revision taking into account your and Bjorn's remarks. Thanks, Arnaud > Thanks, > Mathieu > >> >> @@ -1270,7 +1275,7 @@ void rproc_resource_cleanup(struct rproc *rproc) >> >> /* clean up remote vdev entries */ >> list_for_each_entry_safe(rvdev, rvtmp, &rproc->rvdevs, node) >> - kref_put(&rvdev->refcount, rproc_vdev_release); >> + rproc_virtio_unregister_device(rvdev); >> >> rproc_coredump_cleanup(rproc); >> } >> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h >> index 0bb1b14e5136..2f68e7380c77 100644 >> --- a/drivers/remoteproc/remoteproc_internal.h >> +++ b/drivers/remoteproc/remoteproc_internal.h >> @@ -38,12 +38,10 @@ int rproc_of_parse_firmware(struct device *dev, int index, >> /* from remoteproc_virtio.c */ >> #if IS_ENABLED(CONFIG_REMOTEPROC_VIRTIO) >> >> -int rproc_rvdev_add_device(struct rproc_vdev *rvdev); >> struct platform_device * >> rproc_virtio_register_device(struct rproc *rproc, struct rproc_vdev_data *vdev_data); >> void rproc_virtio_unregister_device(struct rproc_vdev *rvdev); >> irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id); >> -void rproc_vdev_release(struct kref *ref); >> >> #else >> >> @@ -59,14 +57,6 @@ static inline void rproc_virtio_unregister_device(struct rproc_vdev *rvdev) >> WARN_ON(1); >> } >> >> -int rproc_rvdev_add_device(struct rproc_vdev *rvdev) >> -{ >> - /* This shouldn't be possible */ >> - WARN_ON(1); >> - >> - return -ENXIO; >> -} >> - >> static inline irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id) >> { >> /* This shouldn't be possible */ >> @@ -75,12 +65,6 @@ static inline irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id) >> return IRQ_NONE; >> } >> >> -static inline void rproc_vdev_release(struct kref *ref) >> -{ >> - /* This shouldn't be possible */ >> - WARN_ON(1); >> -} >> - >> #endif >> >> /* from remoteproc_debugfs.c */ >> diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c >> index 7188fb8ce40f..34781a2136e6 100644 >> --- a/drivers/remoteproc/remoteproc_virtio.c >> +++ b/drivers/remoteproc/remoteproc_virtio.c >> @@ -29,7 +29,11 @@ >> >> static struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev) >> { >> - return container_of(vdev->dev.parent, struct rproc_vdev, dev); >> + struct platform_device *pdev; >> + >> + pdev = container_of(vdev->dev.parent, struct platform_device, dev); >> + >> + return platform_get_drvdata(pdev); >> } >> >> static struct rproc *vdev_to_rproc(struct virtio_device *vdev) >> @@ -343,13 +347,10 @@ static void rproc_virtio_dev_release(struct device *dev) >> { >> struct virtio_device *vdev = dev_to_virtio(dev); >> struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); >> - struct rproc *rproc = vdev_to_rproc(vdev); >> >> kfree(vdev); >> >> - kref_put(&rvdev->refcount, rproc_vdev_release); >> - >> - put_device(&rproc->dev); >> + put_device(&rvdev->pdev->dev); >> } >> >> /** >> @@ -365,7 +366,7 @@ static void rproc_virtio_dev_release(struct device *dev) >> static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) >> { >> struct rproc *rproc = rvdev->rproc; >> - struct device *dev = &rvdev->dev; >> + struct device *dev = &rvdev->pdev->dev; >> struct virtio_device *vdev; >> struct rproc_mem_entry *mem; >> int ret; >> @@ -436,17 +437,15 @@ static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) >> vdev->dev.release = rproc_virtio_dev_release; >> >> /* >> - * We're indirectly making a non-temporary copy of the rproc pointer >> + * We're indirectly making a non-temporary copy of the rvdev pointer >> * here, because drivers probed with this vdev will indirectly >> * access the wrapping rproc. >> * >> - * Therefore we must increment the rproc refcount here, and decrement >> + * Therefore we must increment the rvdev refcount here, and decrement >> * it _only_ when the vdev is released. >> */ >> - get_device(&rproc->dev); >> + get_device(dev); >> >> - /* Reference the vdev and vring allocations */ >> - kref_get(&rvdev->refcount); >> >> ret = register_virtio_device(vdev); >> if (ret) { >> @@ -488,57 +487,33 @@ static int rproc_vdev_do_start(struct rproc_subdev *subdev) >> static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed) >> { >> struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev); >> + struct device *dev = &rvdev->pdev->dev; >> int ret; >> >> - ret = device_for_each_child(&rvdev->dev, NULL, rproc_remove_virtio_dev); >> + ret = device_for_each_child(dev, NULL, rproc_remove_virtio_dev); >> if (ret) >> - dev_warn(&rvdev->dev, "can't remove vdev child device: %d\n", ret); >> -} >> - >> -/** >> - * rproc_rvdev_release() - release the existence of a rvdev >> - * >> - * @dev: the subdevice's dev >> - */ >> -static void rproc_rvdev_release(struct device *dev) >> -{ >> - struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev); >> - >> - of_reserved_mem_device_release(dev); >> - >> - kfree(rvdev); >> + dev_warn(dev, "can't remove vdev child device: %d\n", ret); >> } >> >> -int rproc_rvdev_add_device(struct rproc_vdev *rvdev) >> +static int rproc_rvdev_add_device(struct rproc_vdev *rvdev) >> { >> struct rproc *rproc = rvdev->rproc; >> - char name[16]; >> + struct device *dev = &rvdev->pdev->dev; >> int ret; >> >> - snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index); >> - rvdev->dev.parent = &rproc->dev; >> - ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent); >> + ret = copy_dma_range_map(dev, rproc->dev.parent); >> if (ret) >> return ret; >> >> - rvdev->dev.release = rproc_rvdev_release; >> - dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name); >> - dev_set_drvdata(&rvdev->dev, rvdev); >> >> - ret = device_register(&rvdev->dev); >> - if (ret) { >> - put_device(&rvdev->dev); >> - return ret; >> - } >> /* Make device dma capable by inheriting from parent's capabilities */ >> - set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent)); >> + set_dma_ops(dev, get_dma_ops(rproc->dev.parent)); >> >> - ret = dma_coerce_mask_and_coherent(&rvdev->dev, >> - dma_get_mask(rproc->dev.parent)); >> + ret = dma_coerce_mask_and_coherent(dev, dma_get_mask(rproc->dev.parent)); >> if (ret) { >> - dev_warn(&rvdev->dev, >> - "Failed to set DMA mask %llx. Trying to continue... %x\n", >> + dev_warn(dev, "Failed to set DMA mask %llx. Trying to continue... %x\n", >> dma_get_mask(rproc->dev.parent), ret); >> + return ret; >> } >> >> rproc_register_rvdev(rvdev); >> @@ -548,30 +523,9 @@ int rproc_rvdev_add_device(struct rproc_vdev *rvdev) >> >> rproc_add_subdev(rproc, &rvdev->subdev); >> >> - return 0; >> -} >> - >> -static void rproc_rvdev_remove_device(struct rproc_vdev *rvdev) >> -{ >> - struct rproc *rproc = rvdev->rproc; >> - >> - rproc_remove_subdev(rproc, &rvdev->subdev); >> - rproc_unregister_rvdev(rvdev); >> - device_unregister(&rvdev->dev); >> -} >> - >> -void rproc_vdev_release(struct kref *ref) >> -{ >> - struct rproc_vdev *rvdev = container_of(ref, struct rproc_vdev, refcount); >> - struct rproc_vring *rvring; >> - int id; >> + dev_dbg(dev, "virtio dev %d added\n", rvdev->index); >> >> - for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) { >> - rvring = &rvdev->vring[id]; >> - rproc_free_vring(rvring); >> - } >> - >> - rproc_rvdev_remove_device(rvdev); >> + return 0; >> } >> >> /** >> @@ -590,8 +544,7 @@ rproc_virtio_register_device(struct rproc *rproc, struct rproc_vdev_data *vdev_d >> pdev = platform_device_register_data(dev, "rproc-virtio", vdev_data->index, vdev_data, >> sizeof(*vdev_data)); >> if (PTR_ERR_OR_ZERO(pdev)) { >> - dev_err(rproc->dev.parent, >> - "failed to create rproc-virtio device\n"); >> + dev_err(rproc->dev.parent, "failed to create rproc-virtio device\n"); >> } >> >> return pdev; >> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h >> index 542a3d4664f2..7951a3e2b62a 100644 >> --- a/include/linux/remoteproc.h >> +++ b/include/linux/remoteproc.h >> @@ -614,10 +614,8 @@ struct rproc_vring { >> >> /** >> * struct rproc_vdev - remoteproc state for a supported virtio device >> - * @refcount: reference counter for the vdev and vring allocations >> * @subdev: handle for registering the vdev as a rproc subdevice >> * @pdev: remoteproc virtio platform device >> - * @dev: device struct used for reference count semantics >> * @id: virtio device id (as in virtio_ids.h) >> * @node: list node >> * @rproc: the rproc handle >> @@ -626,11 +624,9 @@ struct rproc_vring { >> * @index: vdev position versus other vdev declared in resource table >> */ >> struct rproc_vdev { >> - struct kref refcount; >> >> struct rproc_subdev subdev; >> struct platform_device *pdev; >> - struct device dev; >> >> unsigned int id; >> struct list_head node; >> -- >> 2.17.1 >>
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 67ccd088db8f..d9256db8b130 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -467,6 +467,8 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, { struct fw_rsc_vdev *rsc = ptr; struct device *dev = &rproc->dev; + struct rproc_vdev_data vdev_data; + struct platform_device *pdev; struct rproc_vdev *rvdev; int i, ret; @@ -486,28 +488,34 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, dev_dbg(dev, "vdev rsc: id %d, dfeatures 0x%x, cfg len %d, %d vrings\n", rsc->id, rsc->dfeatures, rsc->config_len, rsc->num_of_vrings); - /* we currently support only two vrings per rvdev */ - if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) { - dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings); - return -EINVAL; - } + /* platform data of the new rvdev platform */ + vdev_data.rsc_offset = offset; + vdev_data.id = rsc->id; + vdev_data.index = rproc->nb_vdev; - rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL); - if (!rvdev) - return -ENOMEM; - - kref_init(&rvdev->refcount); - - rvdev->id = rsc->id; - rvdev->rproc = rproc; - rvdev->index = rproc->nb_vdev; + pdev = rproc_virtio_register_device(rproc, &vdev_data); + if (PTR_ERR_OR_ZERO(pdev)) { + dev_err(rproc->dev.parent, + "failed to create rproc-virtio device\n"); + return PTR_ERR_OR_ZERO(pdev); + } - ret = rproc_rvdev_add_device(rvdev); - if (ret) - return ret; + /* If we made it to this point the remote proc virtio platform at been probed */ + rvdev = platform_get_drvdata(pdev); + if (WARN_ON(!rvdev)) { + ret = -EINVAL; + goto free_rvdev; + } rproc->nb_vdev++; + /* we currently support only two vrings per rvdev */ + if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) { + dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings); + ret = -EINVAL; + goto free_rvdev; + } + /* parse the vrings */ for (i = 0; i < rsc->num_of_vrings; i++) { ret = rproc_parse_vring(rvdev, rsc, i); @@ -515,9 +523,6 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, goto free_rvdev; } - /* remember the resource offset*/ - rvdev->rsc_offset = offset; - /* allocate the vring resources */ for (i = 0; i < rsc->num_of_vrings; i++) { ret = rproc_alloc_vring(rvdev, i); @@ -531,7 +536,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, for (i--; i >= 0; i--) rproc_free_vring(&rvdev->vring[i]); free_rvdev: - device_unregister(&rvdev->dev); + rproc_virtio_unregister_device(rvdev); return ret; } @@ -1270,7 +1275,7 @@ void rproc_resource_cleanup(struct rproc *rproc) /* clean up remote vdev entries */ list_for_each_entry_safe(rvdev, rvtmp, &rproc->rvdevs, node) - kref_put(&rvdev->refcount, rproc_vdev_release); + rproc_virtio_unregister_device(rvdev); rproc_coredump_cleanup(rproc); } diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h index 0bb1b14e5136..2f68e7380c77 100644 --- a/drivers/remoteproc/remoteproc_internal.h +++ b/drivers/remoteproc/remoteproc_internal.h @@ -38,12 +38,10 @@ int rproc_of_parse_firmware(struct device *dev, int index, /* from remoteproc_virtio.c */ #if IS_ENABLED(CONFIG_REMOTEPROC_VIRTIO) -int rproc_rvdev_add_device(struct rproc_vdev *rvdev); struct platform_device * rproc_virtio_register_device(struct rproc *rproc, struct rproc_vdev_data *vdev_data); void rproc_virtio_unregister_device(struct rproc_vdev *rvdev); irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id); -void rproc_vdev_release(struct kref *ref); #else @@ -59,14 +57,6 @@ static inline void rproc_virtio_unregister_device(struct rproc_vdev *rvdev) WARN_ON(1); } -int rproc_rvdev_add_device(struct rproc_vdev *rvdev) -{ - /* This shouldn't be possible */ - WARN_ON(1); - - return -ENXIO; -} - static inline irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id) { /* This shouldn't be possible */ @@ -75,12 +65,6 @@ static inline irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id) return IRQ_NONE; } -static inline void rproc_vdev_release(struct kref *ref) -{ - /* This shouldn't be possible */ - WARN_ON(1); -} - #endif /* from remoteproc_debugfs.c */ diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c index 7188fb8ce40f..34781a2136e6 100644 --- a/drivers/remoteproc/remoteproc_virtio.c +++ b/drivers/remoteproc/remoteproc_virtio.c @@ -29,7 +29,11 @@ static struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev) { - return container_of(vdev->dev.parent, struct rproc_vdev, dev); + struct platform_device *pdev; + + pdev = container_of(vdev->dev.parent, struct platform_device, dev); + + return platform_get_drvdata(pdev); } static struct rproc *vdev_to_rproc(struct virtio_device *vdev) @@ -343,13 +347,10 @@ static void rproc_virtio_dev_release(struct device *dev) { struct virtio_device *vdev = dev_to_virtio(dev); struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); - struct rproc *rproc = vdev_to_rproc(vdev); kfree(vdev); - kref_put(&rvdev->refcount, rproc_vdev_release); - - put_device(&rproc->dev); + put_device(&rvdev->pdev->dev); } /** @@ -365,7 +366,7 @@ static void rproc_virtio_dev_release(struct device *dev) static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) { struct rproc *rproc = rvdev->rproc; - struct device *dev = &rvdev->dev; + struct device *dev = &rvdev->pdev->dev; struct virtio_device *vdev; struct rproc_mem_entry *mem; int ret; @@ -436,17 +437,15 @@ static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) vdev->dev.release = rproc_virtio_dev_release; /* - * We're indirectly making a non-temporary copy of the rproc pointer + * We're indirectly making a non-temporary copy of the rvdev pointer * here, because drivers probed with this vdev will indirectly * access the wrapping rproc. * - * Therefore we must increment the rproc refcount here, and decrement + * Therefore we must increment the rvdev refcount here, and decrement * it _only_ when the vdev is released. */ - get_device(&rproc->dev); + get_device(dev); - /* Reference the vdev and vring allocations */ - kref_get(&rvdev->refcount); ret = register_virtio_device(vdev); if (ret) { @@ -488,57 +487,33 @@ static int rproc_vdev_do_start(struct rproc_subdev *subdev) static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed) { struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev); + struct device *dev = &rvdev->pdev->dev; int ret; - ret = device_for_each_child(&rvdev->dev, NULL, rproc_remove_virtio_dev); + ret = device_for_each_child(dev, NULL, rproc_remove_virtio_dev); if (ret) - dev_warn(&rvdev->dev, "can't remove vdev child device: %d\n", ret); -} - -/** - * rproc_rvdev_release() - release the existence of a rvdev - * - * @dev: the subdevice's dev - */ -static void rproc_rvdev_release(struct device *dev) -{ - struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev); - - of_reserved_mem_device_release(dev); - - kfree(rvdev); + dev_warn(dev, "can't remove vdev child device: %d\n", ret); } -int rproc_rvdev_add_device(struct rproc_vdev *rvdev) +static int rproc_rvdev_add_device(struct rproc_vdev *rvdev) { struct rproc *rproc = rvdev->rproc; - char name[16]; + struct device *dev = &rvdev->pdev->dev; int ret; - snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index); - rvdev->dev.parent = &rproc->dev; - ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent); + ret = copy_dma_range_map(dev, rproc->dev.parent); if (ret) return ret; - rvdev->dev.release = rproc_rvdev_release; - dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name); - dev_set_drvdata(&rvdev->dev, rvdev); - ret = device_register(&rvdev->dev); - if (ret) { - put_device(&rvdev->dev); - return ret; - } /* Make device dma capable by inheriting from parent's capabilities */ - set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent)); + set_dma_ops(dev, get_dma_ops(rproc->dev.parent)); - ret = dma_coerce_mask_and_coherent(&rvdev->dev, - dma_get_mask(rproc->dev.parent)); + ret = dma_coerce_mask_and_coherent(dev, dma_get_mask(rproc->dev.parent)); if (ret) { - dev_warn(&rvdev->dev, - "Failed to set DMA mask %llx. Trying to continue... %x\n", + dev_warn(dev, "Failed to set DMA mask %llx. Trying to continue... %x\n", dma_get_mask(rproc->dev.parent), ret); + return ret; } rproc_register_rvdev(rvdev); @@ -548,30 +523,9 @@ int rproc_rvdev_add_device(struct rproc_vdev *rvdev) rproc_add_subdev(rproc, &rvdev->subdev); - return 0; -} - -static void rproc_rvdev_remove_device(struct rproc_vdev *rvdev) -{ - struct rproc *rproc = rvdev->rproc; - - rproc_remove_subdev(rproc, &rvdev->subdev); - rproc_unregister_rvdev(rvdev); - device_unregister(&rvdev->dev); -} - -void rproc_vdev_release(struct kref *ref) -{ - struct rproc_vdev *rvdev = container_of(ref, struct rproc_vdev, refcount); - struct rproc_vring *rvring; - int id; + dev_dbg(dev, "virtio dev %d added\n", rvdev->index); - for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) { - rvring = &rvdev->vring[id]; - rproc_free_vring(rvring); - } - - rproc_rvdev_remove_device(rvdev); + return 0; } /** @@ -590,8 +544,7 @@ rproc_virtio_register_device(struct rproc *rproc, struct rproc_vdev_data *vdev_d pdev = platform_device_register_data(dev, "rproc-virtio", vdev_data->index, vdev_data, sizeof(*vdev_data)); if (PTR_ERR_OR_ZERO(pdev)) { - dev_err(rproc->dev.parent, - "failed to create rproc-virtio device\n"); + dev_err(rproc->dev.parent, "failed to create rproc-virtio device\n"); } return pdev; diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index 542a3d4664f2..7951a3e2b62a 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -614,10 +614,8 @@ struct rproc_vring { /** * struct rproc_vdev - remoteproc state for a supported virtio device - * @refcount: reference counter for the vdev and vring allocations * @subdev: handle for registering the vdev as a rproc subdevice * @pdev: remoteproc virtio platform device - * @dev: device struct used for reference count semantics * @id: virtio device id (as in virtio_ids.h) * @node: list node * @rproc: the rproc handle @@ -626,11 +624,9 @@ struct rproc_vring { * @index: vdev position versus other vdev declared in resource table */ struct rproc_vdev { - struct kref refcount; struct rproc_subdev subdev; struct platform_device *pdev; - struct device dev; unsigned int id; struct list_head node;
Migrate from the rvdev device to the rvdev platform device. From this patch, when a vdev resource is found in the resource table the remoteproc core register a platform device. All reference to the rvdev->dev has been updated to rvdev-pdev->dev The use of kref counter is replaced by get/put_device on the remoteproc virtio device. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> --- drivers/remoteproc/remoteproc_core.c | 49 +++++++------ drivers/remoteproc/remoteproc_internal.h | 16 ---- drivers/remoteproc/remoteproc_virtio.c | 93 ++++++------------------ include/linux/remoteproc.h | 4 - 4 files changed, 50 insertions(+), 112 deletions(-)