@@ -1952,6 +1952,7 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
struct spi_nor *nor = mtd_to_spi_nor(mtd);
size_t page_offset, page_remain, i;
ssize_t ret;
+ u32 page_size = nor->params->page_size;
dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
@@ -1968,16 +1969,15 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
* calculated with an AND operation. On the other cases we
* need to do a modulus operation (more expensive).
*/
- if (is_power_of_2(nor->page_size)) {
- page_offset = addr & (nor->page_size - 1);
+ if (is_power_of_2(page_size)) {
+ page_offset = addr & (page_size - 1);
} else {
uint64_t aux = addr;
- page_offset = do_div(aux, nor->page_size);
+ page_offset = do_div(aux, page_size);
}
/* the size of data remaining on the first page */
- page_remain = min_t(size_t,
- nor->page_size - page_offset, len - i);
+ page_remain = min_t(size_t, page_size - page_offset, len - i);
addr = spi_nor_convert_addr(nor, addr);
@@ -3087,7 +3087,7 @@ static void spi_nor_set_mtd_info(struct spi_nor *nor)
if (nor->info->flags & SPI_NOR_NO_ERASE)
mtd->flags |= MTD_NO_ERASE;
mtd->writesize = nor->params->writesize;
- mtd->writebufsize = nor->page_size;
+ mtd->writebufsize = nor->params->page_size;
mtd->size = nor->params->size;
mtd->_erase = spi_nor_erase;
mtd->_read = spi_nor_read;
@@ -3123,7 +3123,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
* We need the bounce buffer early to read/write registers when going
* through the spi-mem layer (buffers have to be DMA-able).
* For spi-mem drivers, we'll reallocate a new buffer if
- * nor->page_size turns out to be greater than PAGE_SIZE (which
+ * nor->params->page_size turns out to be greater than PAGE_SIZE (which
* shouldn't happen before long since NOR pages are usually less
* than 1KB) after spi_nor_scan() returns.
*/
@@ -3180,8 +3180,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
}
- nor->page_size = nor->params->page_size;
-
if (of_property_read_bool(np, "broken-flash-reset"))
nor->flags |= SNOR_F_BROKEN_RESET;
@@ -3346,8 +3344,8 @@ static int spi_nor_probe(struct spi_mem *spimem)
* and add this logic so that if anyone ever adds support for such
* a NOR we don't end up with buffer overflows.
*/
- if (nor->page_size > PAGE_SIZE) {
- nor->bouncebuf_size = nor->page_size;
+ if (nor->params->page_size > PAGE_SIZE) {
+ nor->bouncebuf_size = nor->params->page_size;
devm_kfree(nor->dev, nor->bouncebuf);
nor->bouncebuf = devm_kmalloc(nor->dev,
nor->bouncebuf_size,
@@ -28,11 +28,12 @@ static const struct flash_info xilinx_parts[] = {
*/
static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
{
+ u32 page_size = nor->params->page_size;
u32 offset, page;
- offset = addr % nor->page_size;
- page = addr / nor->page_size;
- page <<= (nor->page_size > 512) ? 10 : 9;
+ offset = addr % page_size;
+ page = addr / page_size;
+ page <<= (page_size > 512) ? 10 : 9;
return page | offset;
}
@@ -40,6 +41,7 @@ static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
static int xilinx_nor_setup(struct spi_nor *nor,
const struct spi_nor_hwcaps *hwcaps)
{
+ u32 page_size;
int ret;
ret = spi_nor_xread_sr(nor, nor->bouncebuf);
@@ -64,10 +66,11 @@ static int xilinx_nor_setup(struct spi_nor *nor,
*/
if (nor->bouncebuf[0] & XSR_PAGESIZE) {
/* Flash in Power of 2 mode */
- nor->page_size = (nor->page_size == 264) ? 256 : 512;
- nor->mtd.writebufsize = nor->page_size;
- nor->mtd.size = 8 * nor->page_size * nor->info->n_sectors;
- nor->mtd.erasesize = 8 * nor->page_size;
+ page_size = (nor->params->page_size == 264) ? 256 : 512;
+ nor->params->page_size = page_size;
+ nor->mtd.writebufsize = page_size;
+ nor->mtd.size = 8 * page_size * nor->info->n_sectors;
+ nor->mtd.erasesize = 8 * page_size;
} else {
/* Flash in Default addressing mode */
nor->params->convert_addr = s3an_convert_addr;
@@ -371,7 +371,6 @@ struct spi_nor_flash_parameter;
* @bouncebuf_size: size of the bounce buffer
* @info: SPI NOR part JEDEC MFR ID and other info
* @manufacturer: SPI NOR manufacturer
- * @page_size: the page size of the SPI NOR
* @addr_width: number of address bytes
* @erase_opcode: the opcode for erasing a sector
* @read_opcode: the read opcode
@@ -401,7 +400,6 @@ struct spi_nor {
size_t bouncebuf_size;
const struct flash_info *info;
const struct spi_nor_manufacturer *manufacturer;
- u32 page_size;
u8 addr_width;
u8 erase_opcode;
u8 read_opcode;