diff mbox series

blk-cgroup: fix missing put device in error path from blkg_conf_pref()

Message ID 20211102020705.2321858-1-yukuai3@huawei.com (mailing list archive)
State New, archived
Headers show
Series blk-cgroup: fix missing put device in error path from blkg_conf_pref() | expand

Commit Message

Yu Kuai Nov. 2, 2021, 2:07 a.m. UTC
If blk_queue_enter() failed due to queue is dying, the
blkdev_put_no_open() is needed because blkcg_conf_open_bdev() succeeded.

Fixes: 0c9d338c8443 ("blk-cgroup: synchronize blkg creation against policy deactivation")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
 block/blk-cgroup.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Comments

Yu Kuai Nov. 6, 2021, 9:12 a.m. UTC | #1
On 2021/11/02 10:07, Yu Kuai wrote:
friendly ping...
> If blk_queue_enter() failed due to queue is dying, the
> blkdev_put_no_open() is needed because blkcg_conf_open_bdev() succeeded.
> 
> Fixes: 0c9d338c8443 ("blk-cgroup: synchronize blkg creation against policy deactivation")
> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
> ---
>   block/blk-cgroup.c | 9 +++++----
>   1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
> index 88b1fce90520..663aabfeba18 100644
> --- a/block/blk-cgroup.c
> +++ b/block/blk-cgroup.c
> @@ -640,7 +640,7 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
>   	 */
>   	ret = blk_queue_enter(q, 0);
>   	if (ret)
> -		return ret;
> +		goto fail;
>   
>   	rcu_read_lock();
>   	spin_lock_irq(&q->queue_lock);
> @@ -676,13 +676,13 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
>   		new_blkg = blkg_alloc(pos, q, GFP_KERNEL);
>   		if (unlikely(!new_blkg)) {
>   			ret = -ENOMEM;
> -			goto fail;
> +			goto fail_exit_queue;
>   		}
>   
>   		if (radix_tree_preload(GFP_KERNEL)) {
>   			blkg_free(new_blkg);
>   			ret = -ENOMEM;
> -			goto fail;
> +			goto fail_exit_queue;
>   		}
>   
>   		rcu_read_lock();
> @@ -722,9 +722,10 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
>   fail_unlock:
>   	spin_unlock_irq(&q->queue_lock);
>   	rcu_read_unlock();
> +fail_exit_queue:
> +	blk_queue_exit(q);
>   fail:
>   	blkdev_put_no_open(bdev);
> -	blk_queue_exit(q);
>   	/*
>   	 * If queue was bypassing, we should retry.  Do so after a
>   	 * short msleep().  It isn't strictly necessary but queue
>
Tejun Heo Nov. 15, 2021, 9:37 p.m. UTC | #2
On Tue, Nov 02, 2021 at 10:07:05AM +0800, Yu Kuai wrote:
> If blk_queue_enter() failed due to queue is dying, the
> blkdev_put_no_open() is needed because blkcg_conf_open_bdev() succeeded.
> 
> Fixes: 0c9d338c8443 ("blk-cgroup: synchronize blkg creation against policy deactivation")
> Signed-off-by: Yu Kuai <yukuai3@huawei.com>

Acked-by: Tejun Heo <tj@kernel.org>

Thanks.
Yu Kuai Nov. 19, 2021, 8:09 a.m. UTC | #3
On 2021/11/02 10:07, Yu Kuai wrote:
Hi, Jens

friendly ping ...

Thanks,
Kuai
> If blk_queue_enter() failed due to queue is dying, the
> blkdev_put_no_open() is needed because blkcg_conf_open_bdev() succeeded.
> 
> Fixes: 0c9d338c8443 ("blk-cgroup: synchronize blkg creation against policy deactivation")
> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
> ---
>   block/blk-cgroup.c | 9 +++++----
>   1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
> index 88b1fce90520..663aabfeba18 100644
> --- a/block/blk-cgroup.c
> +++ b/block/blk-cgroup.c
> @@ -640,7 +640,7 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
>   	 */
>   	ret = blk_queue_enter(q, 0);
>   	if (ret)
> -		return ret;
> +		goto fail;
>   
>   	rcu_read_lock();
>   	spin_lock_irq(&q->queue_lock);
> @@ -676,13 +676,13 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
>   		new_blkg = blkg_alloc(pos, q, GFP_KERNEL);
>   		if (unlikely(!new_blkg)) {
>   			ret = -ENOMEM;
> -			goto fail;
> +			goto fail_exit_queue;
>   		}
>   
>   		if (radix_tree_preload(GFP_KERNEL)) {
>   			blkg_free(new_blkg);
>   			ret = -ENOMEM;
> -			goto fail;
> +			goto fail_exit_queue;
>   		}
>   
>   		rcu_read_lock();
> @@ -722,9 +722,10 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
>   fail_unlock:
>   	spin_unlock_irq(&q->queue_lock);
>   	rcu_read_unlock();
> +fail_exit_queue:
> +	blk_queue_exit(q);
>   fail:
>   	blkdev_put_no_open(bdev);
> -	blk_queue_exit(q);
>   	/*
>   	 * If queue was bypassing, we should retry.  Do so after a
>   	 * short msleep().  It isn't strictly necessary but queue
>
Jens Axboe Nov. 19, 2021, 1:27 p.m. UTC | #4
On Tue, 2 Nov 2021 10:07:05 +0800, Yu Kuai wrote:
> If blk_queue_enter() failed due to queue is dying, the
> blkdev_put_no_open() is needed because blkcg_conf_open_bdev() succeeded.
> 
> 

Applied, thanks!

[1/1] blk-cgroup: fix missing put device in error path from blkg_conf_pref()
      commit: 15c30104965101b8e76b24d27035569d6613a7d6

Best regards,
diff mbox series

Patch

diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index 88b1fce90520..663aabfeba18 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -640,7 +640,7 @@  int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
 	 */
 	ret = blk_queue_enter(q, 0);
 	if (ret)
-		return ret;
+		goto fail;
 
 	rcu_read_lock();
 	spin_lock_irq(&q->queue_lock);
@@ -676,13 +676,13 @@  int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
 		new_blkg = blkg_alloc(pos, q, GFP_KERNEL);
 		if (unlikely(!new_blkg)) {
 			ret = -ENOMEM;
-			goto fail;
+			goto fail_exit_queue;
 		}
 
 		if (radix_tree_preload(GFP_KERNEL)) {
 			blkg_free(new_blkg);
 			ret = -ENOMEM;
-			goto fail;
+			goto fail_exit_queue;
 		}
 
 		rcu_read_lock();
@@ -722,9 +722,10 @@  int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
 fail_unlock:
 	spin_unlock_irq(&q->queue_lock);
 	rcu_read_unlock();
+fail_exit_queue:
+	blk_queue_exit(q);
 fail:
 	blkdev_put_no_open(bdev);
-	blk_queue_exit(q);
 	/*
 	 * If queue was bypassing, we should retry.  Do so after a
 	 * short msleep().  It isn't strictly necessary but queue