| Message ID | 20210803113134.2262882-9-iwona.winiarska@intel.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Introduce PECI subsystem | expand |
On Tue, Aug 3, 2021 at 4:35 AM Iwona Winiarska <iwona.winiarska@intel.com> wrote: > > Since PECI devices are discoverable, we can dynamically detect devices > that are actually available in the system. > > This change complements the earlier implementation by rescanning PECI > bus to detect available devices. For this purpose, it also introduces the > minimal API for PECI requests. > > Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> > Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> > --- > drivers/peci/Makefile | 2 +- > drivers/peci/core.c | 33 ++++++++++++ > drivers/peci/device.c | 114 ++++++++++++++++++++++++++++++++++++++++ > drivers/peci/internal.h | 14 +++++ > drivers/peci/request.c | 50 ++++++++++++++++++ > 5 files changed, 212 insertions(+), 1 deletion(-) > create mode 100644 drivers/peci/device.c > create mode 100644 drivers/peci/request.c > > diff --git a/drivers/peci/Makefile b/drivers/peci/Makefile > index 926d8df15cbd..c5f9d3fe21bb 100644 > --- a/drivers/peci/Makefile > +++ b/drivers/peci/Makefile > @@ -1,7 +1,7 @@ > # SPDX-License-Identifier: GPL-2.0-only > > # Core functionality > -peci-y := core.o > +peci-y := core.o request.o device.o > obj-$(CONFIG_PECI) += peci.o > > # Hardware specific bus drivers > diff --git a/drivers/peci/core.c b/drivers/peci/core.c > index 7b3938af0396..d143f1a7fe98 100644 > --- a/drivers/peci/core.c > +++ b/drivers/peci/core.c > @@ -34,6 +34,20 @@ struct device_type peci_controller_type = { > .release = peci_controller_dev_release, > }; > > +static int peci_controller_scan_devices(struct peci_controller *controller) > +{ > + int ret; > + u8 addr; > + > + for (addr = PECI_BASE_ADDR; addr < PECI_BASE_ADDR + PECI_DEVICE_NUM_MAX; addr++) { > + ret = peci_device_create(controller, addr); > + if (ret) > + return ret; > + } > + > + return 0; > +} > + > static struct peci_controller *peci_controller_alloc(struct device *dev, > struct peci_controller_ops *ops) > { > @@ -76,10 +90,23 @@ static struct peci_controller *peci_controller_alloc(struct device *dev, > return ERR_PTR(ret); > } > > +static int unregister_child(struct device *dev, void *dummy) > +{ > + peci_device_destroy(to_peci_device(dev)); > + > + return 0; > +} > + > static void unregister_controller(void *_controller) > { > struct peci_controller *controller = _controller; > > + /* > + * Detach any active PECI devices. This can't fail, thus we do not > + * check the returned value. > + */ > + device_for_each_child_reverse(&controller->dev, NULL, unregister_child); > + > device_unregister(&controller->dev); > } > > @@ -115,6 +142,12 @@ struct peci_controller *devm_peci_controller_add(struct device *dev, > if (ret) > return ERR_PTR(ret); > > + /* > + * Ignoring retval since failures during scan are non-critical for > + * controller itself. > + */ > + peci_controller_scan_devices(controller); > + > return controller; > > err: > diff --git a/drivers/peci/device.c b/drivers/peci/device.c > new file mode 100644 > index 000000000000..32811248997b > --- /dev/null > +++ b/drivers/peci/device.c > @@ -0,0 +1,114 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +// Copyright (c) 2018-2021 Intel Corporation > + > +#include <linux/peci.h> > +#include <linux/slab.h> > + > +#include "internal.h" > + > +static int peci_detect(struct peci_controller *controller, u8 addr) > +{ > + struct peci_request *req; > + int ret; > + > + /* > + * PECI Ping is a command encoded by tx_len = 0, rx_len = 0. > + * We expect correct Write FCS if the device at the target address > + * is able to respond. > + */ > + req = peci_request_alloc(NULL, 0, 0); > + if (!req) > + return -ENOMEM; Seems a waste to do a heap allocation for this routine. Why not: /* * PECI Ping is a command encoded by tx_len = 0, rx_len = 0. * We expect correct Write FCS if the device at the target address * is able to respond. */ struct peci_request req = { 0 }; > + > + mutex_lock(&controller->bus_lock); > + ret = controller->ops->xfer(controller, addr, req); > + mutex_unlock(&controller->bus_lock); > + > + peci_request_free(req); > + > + return ret; > +} > + > +static bool peci_addr_valid(u8 addr) > +{ > + return addr >= PECI_BASE_ADDR && addr < PECI_BASE_ADDR + PECI_DEVICE_NUM_MAX; > +} > + > +static int peci_dev_exists(struct device *dev, void *data) > +{ > + struct peci_device *device = to_peci_device(dev); > + u8 *addr = data; > + > + if (device->addr == *addr) > + return -EBUSY; > + > + return 0; > +} > + > +int peci_device_create(struct peci_controller *controller, u8 addr) > +{ > + struct peci_device *device; > + int ret; > + > + if (WARN_ON(!peci_addr_valid(addr))) The WARN_ON is overkill, especially as there is only one caller of this and it loops through valid addresses. > + return -EINVAL; > + > + /* Check if we have already detected this device before. */ > + ret = device_for_each_child(&controller->dev, &addr, peci_dev_exists); > + if (ret) > + return 0; > + > + ret = peci_detect(controller, addr); > + if (ret) { > + /* > + * Device not present or host state doesn't allow successful > + * detection at this time. > + */ > + if (ret == -EIO || ret == -ETIMEDOUT) > + return 0; > + > + return ret; > + } > + > + device = kzalloc(sizeof(*device), GFP_KERNEL); > + if (!device) > + return -ENOMEM; > + > + device->addr = addr; > + device->dev.parent = &controller->dev; > + device->dev.bus = &peci_bus_type; > + device->dev.type = &peci_device_type; > + > + ret = dev_set_name(&device->dev, "%d-%02x", controller->id, device->addr); > + if (ret) > + goto err_free; It's cleaner to just have one unified error exit using put_device(). Use the device_initialize() + device_add() pattern, not device_register(). > + > + ret = device_register(&device->dev); > + if (ret) > + goto err_put; > + > + return 0; > + > +err_put: > + put_device(&device->dev); > +err_free: > + kfree(device); > + > + return ret; > +} > + > +void peci_device_destroy(struct peci_device *device) > +{ > + device_unregister(&device->dev); No clear value for this wrapper, in fact in one caller it causes it to do a to_peci_device() just this helper can undo that up-cast. > +} > + > +static void peci_device_release(struct device *dev) > +{ > + struct peci_device *device = to_peci_device(dev); > + > + kfree(device); > +} > + > +struct device_type peci_device_type = { > + .release = peci_device_release, > +}; > diff --git a/drivers/peci/internal.h b/drivers/peci/internal.h > index 918dea745a86..57d11a902c5d 100644 > --- a/drivers/peci/internal.h > +++ b/drivers/peci/internal.h > @@ -8,6 +8,20 @@ > #include <linux/types.h> > > struct peci_controller; > +struct peci_device; > +struct peci_request; > + > +/* PECI CPU address range 0x30-0x37 */ > +#define PECI_BASE_ADDR 0x30 > +#define PECI_DEVICE_NUM_MAX 8 > + > +struct peci_request *peci_request_alloc(struct peci_device *device, u8 tx_len, u8 rx_len); > +void peci_request_free(struct peci_request *req); > + > +extern struct device_type peci_device_type; > + > +int peci_device_create(struct peci_controller *controller, u8 addr); > +void peci_device_destroy(struct peci_device *device); > > extern struct bus_type peci_bus_type; > > diff --git a/drivers/peci/request.c b/drivers/peci/request.c > new file mode 100644 > index 000000000000..81b567bc7b87 > --- /dev/null > +++ b/drivers/peci/request.c > @@ -0,0 +1,50 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +// Copyright (c) 2021 Intel Corporation > + > +#include <linux/export.h> > +#include <linux/peci.h> > +#include <linux/slab.h> > +#include <linux/types.h> > + > +#include "internal.h" > + > +/** > + * peci_request_alloc() - allocate &struct peci_requests > + * @device: PECI device to which request is going to be sent > + * @tx_len: TX length > + * @rx_len: RX length > + * > + * Return: A pointer to a newly allocated &struct peci_request on success or NULL otherwise. > + */ > +struct peci_request *peci_request_alloc(struct peci_device *device, u8 tx_len, u8 rx_len) > +{ > + struct peci_request *req; > + > + if (WARN_ON_ONCE(tx_len > PECI_REQUEST_MAX_BUF_SIZE || rx_len > PECI_REQUEST_MAX_BUF_SIZE)) WARN_ON_ONCE() should only be here to help other kernel developers not make this mistake However, another way to enforce this is to stop exporting peci_request_alloc() and instead export helpers for specific command types, and keep this detail internal to the core. If you keep this, it needs a comment that it is only here to warn other peci-client developers of their bug before it goes upstream.
On Fri, 2021-08-27 at 12:01 -0700, Dan Williams wrote: > On Tue, Aug 3, 2021 at 4:35 AM Iwona Winiarska > <iwona.winiarska@intel.com> wrote: > > > > Since PECI devices are discoverable, we can dynamically detect devices > > that are actually available in the system. > > > > This change complements the earlier implementation by rescanning PECI > > bus to detect available devices. For this purpose, it also introduces the > > minimal API for PECI requests. > > > > Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> > > Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> > > --- > > drivers/peci/Makefile | 2 +- > > drivers/peci/core.c | 33 ++++++++++++ > > drivers/peci/device.c | 114 ++++++++++++++++++++++++++++++++++++++++ > > drivers/peci/internal.h | 14 +++++ > > drivers/peci/request.c | 50 ++++++++++++++++++ > > 5 files changed, 212 insertions(+), 1 deletion(-) > > create mode 100644 drivers/peci/device.c > > create mode 100644 drivers/peci/request.c > > > > diff --git a/drivers/peci/Makefile b/drivers/peci/Makefile > > index 926d8df15cbd..c5f9d3fe21bb 100644 > > --- a/drivers/peci/Makefile > > +++ b/drivers/peci/Makefile > > @@ -1,7 +1,7 @@ > > # SPDX-License-Identifier: GPL-2.0-only > > > > # Core functionality > > -peci-y := core.o > > +peci-y := core.o request.o device.o > > obj-$(CONFIG_PECI) += peci.o > > > > # Hardware specific bus drivers > > diff --git a/drivers/peci/core.c b/drivers/peci/core.c > > index 7b3938af0396..d143f1a7fe98 100644 > > --- a/drivers/peci/core.c > > +++ b/drivers/peci/core.c > > @@ -34,6 +34,20 @@ struct device_type peci_controller_type = { > > .release = peci_controller_dev_release, > > }; > > > > +static int peci_controller_scan_devices(struct peci_controller *controller) > > +{ > > + int ret; > > + u8 addr; > > + > > + for (addr = PECI_BASE_ADDR; addr < PECI_BASE_ADDR + > > PECI_DEVICE_NUM_MAX; addr++) { > > + ret = peci_device_create(controller, addr); > > + if (ret) > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > static struct peci_controller *peci_controller_alloc(struct device *dev, > > struct > > peci_controller_ops *ops) > > { > > @@ -76,10 +90,23 @@ static struct peci_controller > > *peci_controller_alloc(struct device *dev, > > return ERR_PTR(ret); > > } > > > > +static int unregister_child(struct device *dev, void *dummy) > > +{ > > + peci_device_destroy(to_peci_device(dev)); > > + > > + return 0; > > +} > > + > > static void unregister_controller(void *_controller) > > { > > struct peci_controller *controller = _controller; > > > > + /* > > + * Detach any active PECI devices. This can't fail, thus we do not > > + * check the returned value. > > + */ > > + device_for_each_child_reverse(&controller->dev, NULL, > > unregister_child); > > + > > device_unregister(&controller->dev); > > } > > > > @@ -115,6 +142,12 @@ struct peci_controller *devm_peci_controller_add(struct > > device *dev, > > if (ret) > > return ERR_PTR(ret); > > > > + /* > > + * Ignoring retval since failures during scan are non-critical for > > + * controller itself. > > + */ > > + peci_controller_scan_devices(controller); > > + > > return controller; > > > > err: > > diff --git a/drivers/peci/device.c b/drivers/peci/device.c > > new file mode 100644 > > index 000000000000..32811248997b > > --- /dev/null > > +++ b/drivers/peci/device.c > > @@ -0,0 +1,114 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +// Copyright (c) 2018-2021 Intel Corporation > > + > > +#include <linux/peci.h> > > +#include <linux/slab.h> > > + > > +#include "internal.h" > > + > > +static int peci_detect(struct peci_controller *controller, u8 addr) > > +{ > > + struct peci_request *req; > > + int ret; > > + > > + /* > > + * PECI Ping is a command encoded by tx_len = 0, rx_len = 0. > > + * We expect correct Write FCS if the device at the target address > > + * is able to respond. > > + */ > > + req = peci_request_alloc(NULL, 0, 0); > > + if (!req) > > + return -ENOMEM; > > Seems a waste to do a heap allocation for this routine. Why not: > > /* > * PECI Ping is a command encoded by tx_len = 0, rx_len = 0. > * We expect correct Write FCS if the device at the target address > * is able to respond. > */ > struct peci_request req = { 0 }; Done. > > > + > > + mutex_lock(&controller->bus_lock); > > + ret = controller->ops->xfer(controller, addr, req); > > + mutex_unlock(&controller->bus_lock); > > + > > + peci_request_free(req); > > + > > + return ret; > > +} > > + > > +static bool peci_addr_valid(u8 addr) > > +{ > > + return addr >= PECI_BASE_ADDR && addr < PECI_BASE_ADDR + > > PECI_DEVICE_NUM_MAX; > > +} > > + > > +static int peci_dev_exists(struct device *dev, void *data) > > +{ > > + struct peci_device *device = to_peci_device(dev); > > + u8 *addr = data; > > + > > + if (device->addr == *addr) > > + return -EBUSY; > > + > > + return 0; > > +} > > + > > +int peci_device_create(struct peci_controller *controller, u8 addr) > > +{ > > + struct peci_device *device; > > + int ret; > > + > > + if (WARN_ON(!peci_addr_valid(addr))) > > The WARN_ON is overkill, especially as there is only one caller of > this and it loops through valid addresses. Done. > > > + return -EINVAL; > > + > > + /* Check if we have already detected this device before. */ > > + ret = device_for_each_child(&controller->dev, &addr, > > peci_dev_exists); > > + if (ret) > > + return 0; > > + > > + ret = peci_detect(controller, addr); > > + if (ret) { > > + /* > > + * Device not present or host state doesn't allow successful > > + * detection at this time. > > + */ > > + if (ret == -EIO || ret == -ETIMEDOUT) > > + return 0; > > + > > + return ret; > > + } > > + > > + device = kzalloc(sizeof(*device), GFP_KERNEL); > > + if (!device) > > + return -ENOMEM; > > + > > + device->addr = addr; > > + device->dev.parent = &controller->dev; > > + device->dev.bus = &peci_bus_type; > > + device->dev.type = &peci_device_type; > > + > > + ret = dev_set_name(&device->dev, "%d-%02x", controller->id, device- > > >addr); > > + if (ret) > > + goto err_free; > > It's cleaner to just have one unified error exit using put_device(). > Use the device_initialize() + device_add() pattern, not > device_register(). Done. > > > > + > > + ret = device_register(&device->dev); > > + if (ret) > > + goto err_put; > > + > > + return 0; > > + > > +err_put: > > + put_device(&device->dev); > > +err_free: > > + kfree(device); > > + > > + return ret; > > +} > > + > > +void peci_device_destroy(struct peci_device *device) > > +{ > > + device_unregister(&device->dev); > > No clear value for this wrapper, in fact in one caller it causes it to > do a to_peci_device() just this helper can undo that up-cast. It gains value after extending it with kill_device(). > > > +} > > + > > +static void peci_device_release(struct device *dev) > > +{ > > + struct peci_device *device = to_peci_device(dev); > > + > > + kfree(device); > > +} > > + > > +struct device_type peci_device_type = { > > + .release = peci_device_release, > > +}; > > diff --git a/drivers/peci/internal.h b/drivers/peci/internal.h > > index 918dea745a86..57d11a902c5d 100644 > > --- a/drivers/peci/internal.h > > +++ b/drivers/peci/internal.h > > @@ -8,6 +8,20 @@ > > #include <linux/types.h> > > > > struct peci_controller; > > +struct peci_device; > > +struct peci_request; > > + > > +/* PECI CPU address range 0x30-0x37 */ > > +#define PECI_BASE_ADDR 0x30 > > +#define PECI_DEVICE_NUM_MAX 8 > > + > > +struct peci_request *peci_request_alloc(struct peci_device *device, u8 > > tx_len, u8 rx_len); > > +void peci_request_free(struct peci_request *req); > > + > > +extern struct device_type peci_device_type; > > + > > +int peci_device_create(struct peci_controller *controller, u8 addr); > > +void peci_device_destroy(struct peci_device *device); > > > > extern struct bus_type peci_bus_type; > > > > diff --git a/drivers/peci/request.c b/drivers/peci/request.c > > new file mode 100644 > > index 000000000000..81b567bc7b87 > > --- /dev/null > > +++ b/drivers/peci/request.c > > @@ -0,0 +1,50 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +// Copyright (c) 2021 Intel Corporation > > + > > +#include <linux/export.h> > > +#include <linux/peci.h> > > +#include <linux/slab.h> > > +#include <linux/types.h> > > + > > +#include "internal.h" > > + > > +/** > > + * peci_request_alloc() - allocate &struct peci_requests > > + * @device: PECI device to which request is going to be sent > > + * @tx_len: TX length > > + * @rx_len: RX length > > + * > > + * Return: A pointer to a newly allocated &struct peci_request on success > > or NULL otherwise. > > + */ > > +struct peci_request *peci_request_alloc(struct peci_device *device, u8 > > tx_len, u8 rx_len) > > +{ > > + struct peci_request *req; > > + > > + if (WARN_ON_ONCE(tx_len > PECI_REQUEST_MAX_BUF_SIZE || rx_len > > > PECI_REQUEST_MAX_BUF_SIZE)) > > WARN_ON_ONCE() should only be here to help other kernel developers not > make this mistake However, another way to enforce this is to stop > exporting peci_request_alloc() and instead export helpers for specific > command types, and keep this detail internal to the core. If you keep > this, it needs a comment that it is only here to warn other > peci-client developers of their bug before it goes upstream. Added comment. Thanks -Iwona
diff --git a/drivers/peci/Makefile b/drivers/peci/Makefile index 926d8df15cbd..c5f9d3fe21bb 100644 --- a/drivers/peci/Makefile +++ b/drivers/peci/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only # Core functionality -peci-y := core.o +peci-y := core.o request.o device.o obj-$(CONFIG_PECI) += peci.o # Hardware specific bus drivers diff --git a/drivers/peci/core.c b/drivers/peci/core.c index 7b3938af0396..d143f1a7fe98 100644 --- a/drivers/peci/core.c +++ b/drivers/peci/core.c @@ -34,6 +34,20 @@ struct device_type peci_controller_type = { .release = peci_controller_dev_release, }; +static int peci_controller_scan_devices(struct peci_controller *controller) +{ + int ret; + u8 addr; + + for (addr = PECI_BASE_ADDR; addr < PECI_BASE_ADDR + PECI_DEVICE_NUM_MAX; addr++) { + ret = peci_device_create(controller, addr); + if (ret) + return ret; + } + + return 0; +} + static struct peci_controller *peci_controller_alloc(struct device *dev, struct peci_controller_ops *ops) { @@ -76,10 +90,23 @@ static struct peci_controller *peci_controller_alloc(struct device *dev, return ERR_PTR(ret); } +static int unregister_child(struct device *dev, void *dummy) +{ + peci_device_destroy(to_peci_device(dev)); + + return 0; +} + static void unregister_controller(void *_controller) { struct peci_controller *controller = _controller; + /* + * Detach any active PECI devices. This can't fail, thus we do not + * check the returned value. + */ + device_for_each_child_reverse(&controller->dev, NULL, unregister_child); + device_unregister(&controller->dev); } @@ -115,6 +142,12 @@ struct peci_controller *devm_peci_controller_add(struct device *dev, if (ret) return ERR_PTR(ret); + /* + * Ignoring retval since failures during scan are non-critical for + * controller itself. + */ + peci_controller_scan_devices(controller); + return controller; err: diff --git a/drivers/peci/device.c b/drivers/peci/device.c new file mode 100644 index 000000000000..32811248997b --- /dev/null +++ b/drivers/peci/device.c @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (c) 2018-2021 Intel Corporation + +#include <linux/peci.h> +#include <linux/slab.h> + +#include "internal.h" + +static int peci_detect(struct peci_controller *controller, u8 addr) +{ + struct peci_request *req; + int ret; + + /* + * PECI Ping is a command encoded by tx_len = 0, rx_len = 0. + * We expect correct Write FCS if the device at the target address + * is able to respond. + */ + req = peci_request_alloc(NULL, 0, 0); + if (!req) + return -ENOMEM; + + mutex_lock(&controller->bus_lock); + ret = controller->ops->xfer(controller, addr, req); + mutex_unlock(&controller->bus_lock); + + peci_request_free(req); + + return ret; +} + +static bool peci_addr_valid(u8 addr) +{ + return addr >= PECI_BASE_ADDR && addr < PECI_BASE_ADDR + PECI_DEVICE_NUM_MAX; +} + +static int peci_dev_exists(struct device *dev, void *data) +{ + struct peci_device *device = to_peci_device(dev); + u8 *addr = data; + + if (device->addr == *addr) + return -EBUSY; + + return 0; +} + +int peci_device_create(struct peci_controller *controller, u8 addr) +{ + struct peci_device *device; + int ret; + + if (WARN_ON(!peci_addr_valid(addr))) + return -EINVAL; + + /* Check if we have already detected this device before. */ + ret = device_for_each_child(&controller->dev, &addr, peci_dev_exists); + if (ret) + return 0; + + ret = peci_detect(controller, addr); + if (ret) { + /* + * Device not present or host state doesn't allow successful + * detection at this time. + */ + if (ret == -EIO || ret == -ETIMEDOUT) + return 0; + + return ret; + } + + device = kzalloc(sizeof(*device), GFP_KERNEL); + if (!device) + return -ENOMEM; + + device->addr = addr; + device->dev.parent = &controller->dev; + device->dev.bus = &peci_bus_type; + device->dev.type = &peci_device_type; + + ret = dev_set_name(&device->dev, "%d-%02x", controller->id, device->addr); + if (ret) + goto err_free; + + ret = device_register(&device->dev); + if (ret) + goto err_put; + + return 0; + +err_put: + put_device(&device->dev); +err_free: + kfree(device); + + return ret; +} + +void peci_device_destroy(struct peci_device *device) +{ + device_unregister(&device->dev); +} + +static void peci_device_release(struct device *dev) +{ + struct peci_device *device = to_peci_device(dev); + + kfree(device); +} + +struct device_type peci_device_type = { + .release = peci_device_release, +}; diff --git a/drivers/peci/internal.h b/drivers/peci/internal.h index 918dea745a86..57d11a902c5d 100644 --- a/drivers/peci/internal.h +++ b/drivers/peci/internal.h @@ -8,6 +8,20 @@ #include <linux/types.h> struct peci_controller; +struct peci_device; +struct peci_request; + +/* PECI CPU address range 0x30-0x37 */ +#define PECI_BASE_ADDR 0x30 +#define PECI_DEVICE_NUM_MAX 8 + +struct peci_request *peci_request_alloc(struct peci_device *device, u8 tx_len, u8 rx_len); +void peci_request_free(struct peci_request *req); + +extern struct device_type peci_device_type; + +int peci_device_create(struct peci_controller *controller, u8 addr); +void peci_device_destroy(struct peci_device *device); extern struct bus_type peci_bus_type; diff --git a/drivers/peci/request.c b/drivers/peci/request.c new file mode 100644 index 000000000000..81b567bc7b87 --- /dev/null +++ b/drivers/peci/request.c @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (c) 2021 Intel Corporation + +#include <linux/export.h> +#include <linux/peci.h> +#include <linux/slab.h> +#include <linux/types.h> + +#include "internal.h" + +/** + * peci_request_alloc() - allocate &struct peci_requests + * @device: PECI device to which request is going to be sent + * @tx_len: TX length + * @rx_len: RX length + * + * Return: A pointer to a newly allocated &struct peci_request on success or NULL otherwise. + */ +struct peci_request *peci_request_alloc(struct peci_device *device, u8 tx_len, u8 rx_len) +{ + struct peci_request *req; + + if (WARN_ON_ONCE(tx_len > PECI_REQUEST_MAX_BUF_SIZE || rx_len > PECI_REQUEST_MAX_BUF_SIZE)) + return NULL; + /* + * PECI controllers that we are using now don't support DMA, this + * should be converted to DMA API once support for controllers that do + * allow it is added to avoid an extra copy. + */ + req = kzalloc(sizeof(*req), GFP_KERNEL); + if (!req) + return NULL; + + req->device = device; + req->tx.len = tx_len; + req->rx.len = rx_len; + + return req; +} +EXPORT_SYMBOL_NS_GPL(peci_request_alloc, PECI); + +/** + * peci_request_free() - free peci_request + * @req: the PECI request to be freed + */ +void peci_request_free(struct peci_request *req) +{ + kfree(req); +} +EXPORT_SYMBOL_NS_GPL(peci_request_free, PECI);