diff mbox series

[v7,2/8] drm/ingenic: Add support for JZ4780 and HDMI output

Message ID af92a37f6c652aedac1782efcf442ad56e38f3ab.1637689583.git.hns@goldelico.com (mailing list archive)
State New, archived
Headers show
Series MIPS: JZ4780 and CI20 HDMI | expand

Commit Message

H. Nikolaus Schaller Nov. 23, 2021, 5:46 p.m. UTC
From: Paul Boddie <paul@boddie.org.uk>

Add support for the LCD controller present on JZ4780 SoCs.
This SoC uses 8-byte descriptors which extend the current
4-byte descriptors used for other Ingenic SoCs.

Tested on MIPS Creator CI20 board.

Signed-off-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 55 ++++++++++++++++++++++-
 drivers/gpu/drm/ingenic/ingenic-drm.h     | 38 ++++++++++++++++
 2 files changed, 92 insertions(+), 1 deletion(-)

Comments

Paul Cercueil Nov. 23, 2021, 6:06 p.m. UTC | #1
Hi Nikolaus,

Le mar., nov. 23 2021 at 18:46:17 +0100, H. Nikolaus Schaller 
<hns@goldelico.com> a écrit :
> From: Paul Boddie <paul@boddie.org.uk>
> 
> Add support for the LCD controller present on JZ4780 SoCs.
> This SoC uses 8-byte descriptors which extend the current
> 4-byte descriptors used for other Ingenic SoCs.
> 
> Tested on MIPS Creator CI20 board.
> 
> Signed-off-by: Paul Boddie <paul@boddie.org.uk>
> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> ---
>  drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 55 
> ++++++++++++++++++++++-
>  drivers/gpu/drm/ingenic/ingenic-drm.h     | 38 ++++++++++++++++
>  2 files changed, 92 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c 
> b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> index 0bb590c3910d9..5ff97a4bbcfe5 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> @@ -6,6 +6,7 @@
> 
>  #include "ingenic-drm.h"
> 
> +#include <linux/bitfield.h>
>  #include <linux/component.h>
>  #include <linux/clk.h>
>  #include <linux/dma-mapping.h>
> @@ -49,6 +50,11 @@ struct ingenic_dma_hwdesc {
>  	u32 addr;
>  	u32 id;
>  	u32 cmd;
> +	/* extended hw descriptor for jz4780 */
> +	u32 offsize;
> +	u32 pagewidth;
> +	u32 cpos;
> +	u32 dessize;
>  } __aligned(16);
> 
>  struct ingenic_dma_hwdescs {
> @@ -60,6 +66,7 @@ struct jz_soc_info {
>  	bool needs_dev_clk;
>  	bool has_osd;
>  	bool map_noncoherent;
> +	bool use_extended_hwdesc;
>  	unsigned int max_width, max_height;
>  	const u32 *formats_f0, *formats_f1;
>  	unsigned int num_formats_f0, num_formats_f1;
> @@ -446,6 +453,9 @@ static int ingenic_drm_plane_atomic_check(struct 
> drm_plane *plane,
>  	if (!crtc)
>  		return 0;
> 
> +	if (plane == &priv->f0)
> +		return -EINVAL;
> +
>  	crtc_state = drm_atomic_get_existing_crtc_state(state,
>  							crtc);
>  	if (WARN_ON(!crtc_state))
> @@ -662,6 +672,33 @@ static void 
> ingenic_drm_plane_atomic_update(struct drm_plane *plane,
>  		hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
>  		hwdesc->next = dma_hwdesc_addr(priv, next_id);
> 
> +		if (priv->soc_info->use_extended_hwdesc) {
> +			hwdesc->cmd |= JZ_LCD_CMD_FRM_ENABLE;
> +
> +			/* Extended 8-byte descriptor */
> +			hwdesc->cpos = 0;
> +			hwdesc->offsize = 0;
> +			hwdesc->pagewidth = 0;
> +
> +			switch (newstate->fb->format->format) {
> +			case DRM_FORMAT_XRGB1555:
> +				hwdesc->cpos |= JZ_LCD_CPOS_RGB555;
> +				fallthrough;
> +			case DRM_FORMAT_RGB565:
> +				hwdesc->cpos |= JZ_LCD_CPOS_BPP_15_16;
> +				break;
> +			case DRM_FORMAT_XRGB8888:
> +				hwdesc->cpos |= JZ_LCD_CPOS_BPP_18_24;
> +				break;
> +			}
> +			hwdesc->cpos |= (JZ_LCD_CPOS_COEFFICIENT_1 <<
> +					 JZ_LCD_CPOS_COEFFICIENT_OFFSET);
> +			hwdesc->dessize =
> +				(0xff << JZ_LCD_DESSIZE_ALPHA_OFFSET) |
> +				FIELD_PREP(JZ_LCD_DESSIZE_HEIGHT_MASK, height - 1) |
> +				FIELD_PREP(JZ_LCD_DESSIZE_WIDTH_MASK, width - 1);
> +		}
> +
>  		if (drm_atomic_crtc_needs_modeset(crtc_state)) {
>  			fourcc = newstate->fb->format->format;
> 
> @@ -693,6 +730,9 @@ static void 
> ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
>  		    | JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
>  	}
> 
> +	if (priv->soc_info->use_extended_hwdesc)
> +		cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
> +
>  	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
>  		cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
>  	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
> @@ -1064,7 +1104,7 @@ static int ingenic_drm_bind(struct device *dev, 
> bool has_components)
>  	}
> 
>  	regmap_config = ingenic_drm_regmap_config;
> -	regmap_config.max_register = res->end - res->start;
> +	regmap_config.max_register = res->end - res->start - 4;

I think this is wrong :)

Cheers,
-Paul

>  	priv->map = devm_regmap_init_mmio(dev, base,
>  					  &regmap_config);
>  	if (IS_ERR(priv->map)) {
> @@ -1468,10 +1508,23 @@ static const struct jz_soc_info 
> jz4770_soc_info = {
>  	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
>  };
> 
> +static const struct jz_soc_info jz4780_soc_info = {
> +	.needs_dev_clk = true,
> +	.has_osd = true,
> +	.use_extended_hwdesc = true,
> +	.max_width = 4096,
> +	.max_height = 2048,
> +	.formats_f1 = jz4770_formats_f1,
> +	.num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
> +	.formats_f0 = jz4770_formats_f0,
> +	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
> +};
> +
>  static const struct of_device_id ingenic_drm_of_match[] = {
>  	{ .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
>  	{ .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info },
>  	{ .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info },
> +	{ .compatible = "ingenic,jz4780-lcd", .data = &jz4780_soc_info },
>  	{ /* sentinel */ },
>  };
>  MODULE_DEVICE_TABLE(of, ingenic_drm_of_match);
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h 
> b/drivers/gpu/drm/ingenic/ingenic-drm.h
> index 22654ac1dde1c..cb1d09b625881 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm.h
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
> @@ -44,8 +44,11 @@
>  #define JZ_REG_LCD_XYP1				0x124
>  #define JZ_REG_LCD_SIZE0			0x128
>  #define JZ_REG_LCD_SIZE1			0x12c
> +#define JZ_REG_LCD_PCFG				0x2c0
> 
>  #define JZ_LCD_CFG_SLCD				BIT(31)
> +#define JZ_LCD_CFG_DESCRIPTOR_8			BIT(28)
> +#define JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN	BIT(25)
>  #define JZ_LCD_CFG_PS_DISABLE			BIT(23)
>  #define JZ_LCD_CFG_CLS_DISABLE			BIT(22)
>  #define JZ_LCD_CFG_SPL_DISABLE			BIT(21)
> @@ -63,6 +66,7 @@
>  #define JZ_LCD_CFG_DE_ACTIVE_LOW		BIT(9)
>  #define JZ_LCD_CFG_VSYNC_ACTIVE_LOW		BIT(8)
>  #define JZ_LCD_CFG_18_BIT			BIT(7)
> +#define JZ_LCD_CFG_24_BIT			BIT(6)
>  #define JZ_LCD_CFG_PDW				(BIT(5) | BIT(4))
> 
>  #define JZ_LCD_CFG_MODE_GENERIC_16BIT		0
> @@ -132,6 +136,7 @@
>  #define JZ_LCD_CMD_SOF_IRQ			BIT(31)
>  #define JZ_LCD_CMD_EOF_IRQ			BIT(30)
>  #define JZ_LCD_CMD_ENABLE_PAL			BIT(28)
> +#define JZ_LCD_CMD_FRM_ENABLE			BIT(26)
> 
>  #define JZ_LCD_SYNC_MASK			0x3ff
> 
> @@ -153,6 +158,7 @@
>  #define JZ_LCD_RGBC_EVEN_BGR			(0x5 << 0)
> 
>  #define JZ_LCD_OSDC_OSDEN			BIT(0)
> +#define JZ_LCD_OSDC_ALPHAEN			BIT(2)
>  #define JZ_LCD_OSDC_F0EN			BIT(3)
>  #define JZ_LCD_OSDC_F1EN			BIT(4)
> 
> @@ -176,6 +182,38 @@
>  #define JZ_LCD_SIZE01_WIDTH_LSB			0
>  #define JZ_LCD_SIZE01_HEIGHT_LSB		16
> 
> +#define JZ_LCD_DESSIZE_ALPHA_OFFSET		24
> +#define JZ_LCD_DESSIZE_HEIGHT_MASK		GENMASK(23, 12)
> +#define JZ_LCD_DESSIZE_WIDTH_MASK		GENMASK(11, 0)
> +
> +#define JZ_LCD_CPOS_BPP_15_16			(4 << 27)
> +#define JZ_LCD_CPOS_BPP_18_24			(5 << 27)
> +#define JZ_LCD_CPOS_BPP_30			(7 << 27)
> +#define JZ_LCD_CPOS_RGB555			BIT(30)
> +#define JZ_LCD_CPOS_PREMULTIPLY_LCD		BIT(26)
> +#define JZ_LCD_CPOS_COEFFICIENT_OFFSET		24
> +#define JZ_LCD_CPOS_COEFFICIENT_0		0
> +#define JZ_LCD_CPOS_COEFFICIENT_1		1
> +#define JZ_LCD_CPOS_COEFFICIENT_ALPHA1		2
> +#define JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1	3
> +
> +#define JZ_LCD_RGBC_RGB_PADDING			BIT(15)
> +#define JZ_LCD_RGBC_RGB_PADDING_FIRST		BIT(14)
> +#define JZ_LCD_RGBC_422				BIT(8)
> +#define JZ_LCD_RGBC_RGB_FORMAT_ENABLE		BIT(7)
> +
> +#define JZ_LCD_PCFG_PRI_MODE			BIT(31)
> +#define JZ_LCD_PCFG_HP_BST_4			(0 << 28)
> +#define JZ_LCD_PCFG_HP_BST_8			(1 << 28)
> +#define JZ_LCD_PCFG_HP_BST_16			(2 << 28)
> +#define JZ_LCD_PCFG_HP_BST_32			(3 << 28)
> +#define JZ_LCD_PCFG_HP_BST_64			(4 << 28)
> +#define JZ_LCD_PCFG_HP_BST_16_CONT		(5 << 28)
> +#define JZ_LCD_PCFG_HP_BST_DISABLE		(7 << 28)
> +#define JZ_LCD_PCFG_THRESHOLD2_OFFSET		18
> +#define JZ_LCD_PCFG_THRESHOLD1_OFFSET		9
> +#define JZ_LCD_PCFG_THRESHOLD0_OFFSET		0
> +
>  struct device;
>  struct drm_plane;
>  struct drm_plane_state;
> --
> 2.33.0
>
H. Nikolaus Schaller Nov. 23, 2021, 6:13 p.m. UTC | #2
> Am 23.11.2021 um 19:06 schrieb Paul Cercueil <paul@crapouillou.net>:
> 
> Hi Nikolaus,
> 
> Le mar., nov. 23 2021 at 18:46:17 +0100, H. Nikolaus Schaller <hns@goldelico.com> a écrit :
>> From: Paul Boddie <paul@boddie.org.uk>
>> Add support for the LCD controller present on JZ4780 SoCs.
>> This SoC uses 8-byte descriptors which extend the current
>> 4-byte descriptors used for other Ingenic SoCs.
>> Tested on MIPS Creator CI20 board.
>> Signed-off-by: Paul Boddie <paul@boddie.org.uk>
>> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
>> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
>> ---
>> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 55 ++++++++++++++++++++++-
>> drivers/gpu/drm/ingenic/ingenic-drm.h     | 38 ++++++++++++++++
>> 2 files changed, 92 insertions(+), 1 deletion(-)
>> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> index 0bb590c3910d9..5ff97a4bbcfe5 100644
>> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> @@ -6,6 +6,7 @@
>> #include "ingenic-drm.h"
>> +#include <linux/bitfield.h>
>> #include <linux/component.h>
>> #include <linux/clk.h>
>> #include <linux/dma-mapping.h>
>> @@ -49,6 +50,11 @@ struct ingenic_dma_hwdesc {
>> 	u32 addr;
>> 	u32 id;
>> 	u32 cmd;
>> +	/* extended hw descriptor for jz4780 */
>> +	u32 offsize;
>> +	u32 pagewidth;
>> +	u32 cpos;
>> +	u32 dessize;
>> } __aligned(16);
>> struct ingenic_dma_hwdescs {
>> @@ -60,6 +66,7 @@ struct jz_soc_info {
>> 	bool needs_dev_clk;
>> 	bool has_osd;
>> 	bool map_noncoherent;
>> +	bool use_extended_hwdesc;
>> 	unsigned int max_width, max_height;
>> 	const u32 *formats_f0, *formats_f1;
>> 	unsigned int num_formats_f0, num_formats_f1;
>> @@ -446,6 +453,9 @@ static int ingenic_drm_plane_atomic_check(struct drm_plane *plane,
>> 	if (!crtc)
>> 		return 0;
>> +	if (plane == &priv->f0)
>> +		return -EINVAL;
>> +
>> 	crtc_state = drm_atomic_get_existing_crtc_state(state,
>> 							crtc);
>> 	if (WARN_ON(!crtc_state))
>> @@ -662,6 +672,33 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
>> 		hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
>> 		hwdesc->next = dma_hwdesc_addr(priv, next_id);
>> +		if (priv->soc_info->use_extended_hwdesc) {
>> +			hwdesc->cmd |= JZ_LCD_CMD_FRM_ENABLE;
>> +
>> +			/* Extended 8-byte descriptor */
>> +			hwdesc->cpos = 0;
>> +			hwdesc->offsize = 0;
>> +			hwdesc->pagewidth = 0;
>> +
>> +			switch (newstate->fb->format->format) {
>> +			case DRM_FORMAT_XRGB1555:
>> +				hwdesc->cpos |= JZ_LCD_CPOS_RGB555;
>> +				fallthrough;
>> +			case DRM_FORMAT_RGB565:
>> +				hwdesc->cpos |= JZ_LCD_CPOS_BPP_15_16;
>> +				break;
>> +			case DRM_FORMAT_XRGB8888:
>> +				hwdesc->cpos |= JZ_LCD_CPOS_BPP_18_24;
>> +				break;
>> +			}
>> +			hwdesc->cpos |= (JZ_LCD_CPOS_COEFFICIENT_1 <<
>> +					 JZ_LCD_CPOS_COEFFICIENT_OFFSET);
>> +			hwdesc->dessize =
>> +				(0xff << JZ_LCD_DESSIZE_ALPHA_OFFSET) |
>> +				FIELD_PREP(JZ_LCD_DESSIZE_HEIGHT_MASK, height - 1) |
>> +				FIELD_PREP(JZ_LCD_DESSIZE_WIDTH_MASK, width - 1);
>> +		}
>> +
>> 		if (drm_atomic_crtc_needs_modeset(crtc_state)) {
>> 			fourcc = newstate->fb->format->format;
>> @@ -693,6 +730,9 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
>> 		    | JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
>> 	}
>> +	if (priv->soc_info->use_extended_hwdesc)
>> +		cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
>> +
>> 	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
>> 		cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
>> 	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
>> @@ -1064,7 +1104,7 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
>> 	}
>> 	regmap_config = ingenic_drm_regmap_config;
>> -	regmap_config.max_register = res->end - res->start;
>> +	regmap_config.max_register = res->end - res->start - 4;
> 
> I think this is wrong :)

Oops, that is a side-effect of my patch series editing tool.
It sometimes reverts changes of a previous commit if both
affect the same file. Sorry for that and I should fix it...

I'll send v8. 

BR and thanks,
Nikolaus


> 
> Cheers,
> -Paul
> 
>> 	priv->map = devm_regmap_init_mmio(dev, base,
>> 					  &regmap_config);
>> 	if (IS_ERR(priv->map)) {
>> @@ -1468,10 +1508,23 @@ static const struct jz_soc_info jz4770_soc_info = {
>> 	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
>> };
>> +static const struct jz_soc_info jz4780_soc_info = {
>> +	.needs_dev_clk = true,
>> +	.has_osd = true,
>> +	.use_extended_hwdesc = true,
>> +	.max_width = 4096,
>> +	.max_height = 2048,
>> +	.formats_f1 = jz4770_formats_f1,
>> +	.num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
>> +	.formats_f0 = jz4770_formats_f0,
>> +	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
>> +};
>> +
>> static const struct of_device_id ingenic_drm_of_match[] = {
>> 	{ .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
>> 	{ .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info },
>> 	{ .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info },
>> +	{ .compatible = "ingenic,jz4780-lcd", .data = &jz4780_soc_info },
>> 	{ /* sentinel */ },
>> };
>> MODULE_DEVICE_TABLE(of, ingenic_drm_of_match);
>> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h b/drivers/gpu/drm/ingenic/ingenic-drm.h
>> index 22654ac1dde1c..cb1d09b625881 100644
>> --- a/drivers/gpu/drm/ingenic/ingenic-drm.h
>> +++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
>> @@ -44,8 +44,11 @@
>> #define JZ_REG_LCD_XYP1				0x124
>> #define JZ_REG_LCD_SIZE0			0x128
>> #define JZ_REG_LCD_SIZE1			0x12c
>> +#define JZ_REG_LCD_PCFG				0x2c0
>> #define JZ_LCD_CFG_SLCD				BIT(31)
>> +#define JZ_LCD_CFG_DESCRIPTOR_8			BIT(28)
>> +#define JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN	BIT(25)
>> #define JZ_LCD_CFG_PS_DISABLE			BIT(23)
>> #define JZ_LCD_CFG_CLS_DISABLE			BIT(22)
>> #define JZ_LCD_CFG_SPL_DISABLE			BIT(21)
>> @@ -63,6 +66,7 @@
>> #define JZ_LCD_CFG_DE_ACTIVE_LOW		BIT(9)
>> #define JZ_LCD_CFG_VSYNC_ACTIVE_LOW		BIT(8)
>> #define JZ_LCD_CFG_18_BIT			BIT(7)
>> +#define JZ_LCD_CFG_24_BIT			BIT(6)
>> #define JZ_LCD_CFG_PDW				(BIT(5) | BIT(4))
>> #define JZ_LCD_CFG_MODE_GENERIC_16BIT		0
>> @@ -132,6 +136,7 @@
>> #define JZ_LCD_CMD_SOF_IRQ			BIT(31)
>> #define JZ_LCD_CMD_EOF_IRQ			BIT(30)
>> #define JZ_LCD_CMD_ENABLE_PAL			BIT(28)
>> +#define JZ_LCD_CMD_FRM_ENABLE			BIT(26)
>> #define JZ_LCD_SYNC_MASK			0x3ff
>> @@ -153,6 +158,7 @@
>> #define JZ_LCD_RGBC_EVEN_BGR			(0x5 << 0)
>> #define JZ_LCD_OSDC_OSDEN			BIT(0)
>> +#define JZ_LCD_OSDC_ALPHAEN			BIT(2)
>> #define JZ_LCD_OSDC_F0EN			BIT(3)
>> #define JZ_LCD_OSDC_F1EN			BIT(4)
>> @@ -176,6 +182,38 @@
>> #define JZ_LCD_SIZE01_WIDTH_LSB			0
>> #define JZ_LCD_SIZE01_HEIGHT_LSB		16
>> +#define JZ_LCD_DESSIZE_ALPHA_OFFSET		24
>> +#define JZ_LCD_DESSIZE_HEIGHT_MASK		GENMASK(23, 12)
>> +#define JZ_LCD_DESSIZE_WIDTH_MASK		GENMASK(11, 0)
>> +
>> +#define JZ_LCD_CPOS_BPP_15_16			(4 << 27)
>> +#define JZ_LCD_CPOS_BPP_18_24			(5 << 27)
>> +#define JZ_LCD_CPOS_BPP_30			(7 << 27)
>> +#define JZ_LCD_CPOS_RGB555			BIT(30)
>> +#define JZ_LCD_CPOS_PREMULTIPLY_LCD		BIT(26)
>> +#define JZ_LCD_CPOS_COEFFICIENT_OFFSET		24
>> +#define JZ_LCD_CPOS_COEFFICIENT_0		0
>> +#define JZ_LCD_CPOS_COEFFICIENT_1		1
>> +#define JZ_LCD_CPOS_COEFFICIENT_ALPHA1		2
>> +#define JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1	3
>> +
>> +#define JZ_LCD_RGBC_RGB_PADDING			BIT(15)
>> +#define JZ_LCD_RGBC_RGB_PADDING_FIRST		BIT(14)
>> +#define JZ_LCD_RGBC_422				BIT(8)
>> +#define JZ_LCD_RGBC_RGB_FORMAT_ENABLE		BIT(7)
>> +
>> +#define JZ_LCD_PCFG_PRI_MODE			BIT(31)
>> +#define JZ_LCD_PCFG_HP_BST_4			(0 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_8			(1 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_16			(2 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_32			(3 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_64			(4 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_16_CONT		(5 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_DISABLE		(7 << 28)
>> +#define JZ_LCD_PCFG_THRESHOLD2_OFFSET		18
>> +#define JZ_LCD_PCFG_THRESHOLD1_OFFSET		9
>> +#define JZ_LCD_PCFG_THRESHOLD0_OFFSET		0
>> +
>> struct device;
>> struct drm_plane;
>> struct drm_plane_state;
>> --
>> 2.33.0
diff mbox series

Patch

diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
index 0bb590c3910d9..5ff97a4bbcfe5 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
@@ -6,6 +6,7 @@ 
 
 #include "ingenic-drm.h"
 
+#include <linux/bitfield.h>
 #include <linux/component.h>
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
@@ -49,6 +50,11 @@  struct ingenic_dma_hwdesc {
 	u32 addr;
 	u32 id;
 	u32 cmd;
+	/* extended hw descriptor for jz4780 */
+	u32 offsize;
+	u32 pagewidth;
+	u32 cpos;
+	u32 dessize;
 } __aligned(16);
 
 struct ingenic_dma_hwdescs {
@@ -60,6 +66,7 @@  struct jz_soc_info {
 	bool needs_dev_clk;
 	bool has_osd;
 	bool map_noncoherent;
+	bool use_extended_hwdesc;
 	unsigned int max_width, max_height;
 	const u32 *formats_f0, *formats_f1;
 	unsigned int num_formats_f0, num_formats_f1;
@@ -446,6 +453,9 @@  static int ingenic_drm_plane_atomic_check(struct drm_plane *plane,
 	if (!crtc)
 		return 0;
 
+	if (plane == &priv->f0)
+		return -EINVAL;
+
 	crtc_state = drm_atomic_get_existing_crtc_state(state,
 							crtc);
 	if (WARN_ON(!crtc_state))
@@ -662,6 +672,33 @@  static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
 		hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
 		hwdesc->next = dma_hwdesc_addr(priv, next_id);
 
+		if (priv->soc_info->use_extended_hwdesc) {
+			hwdesc->cmd |= JZ_LCD_CMD_FRM_ENABLE;
+
+			/* Extended 8-byte descriptor */
+			hwdesc->cpos = 0;
+			hwdesc->offsize = 0;
+			hwdesc->pagewidth = 0;
+
+			switch (newstate->fb->format->format) {
+			case DRM_FORMAT_XRGB1555:
+				hwdesc->cpos |= JZ_LCD_CPOS_RGB555;
+				fallthrough;
+			case DRM_FORMAT_RGB565:
+				hwdesc->cpos |= JZ_LCD_CPOS_BPP_15_16;
+				break;
+			case DRM_FORMAT_XRGB8888:
+				hwdesc->cpos |= JZ_LCD_CPOS_BPP_18_24;
+				break;
+			}
+			hwdesc->cpos |= (JZ_LCD_CPOS_COEFFICIENT_1 <<
+					 JZ_LCD_CPOS_COEFFICIENT_OFFSET);
+			hwdesc->dessize =
+				(0xff << JZ_LCD_DESSIZE_ALPHA_OFFSET) |
+				FIELD_PREP(JZ_LCD_DESSIZE_HEIGHT_MASK, height - 1) |
+				FIELD_PREP(JZ_LCD_DESSIZE_WIDTH_MASK, width - 1);
+		}
+
 		if (drm_atomic_crtc_needs_modeset(crtc_state)) {
 			fourcc = newstate->fb->format->format;
 
@@ -693,6 +730,9 @@  static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
 		    | JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
 	}
 
+	if (priv->soc_info->use_extended_hwdesc)
+		cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
+
 	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
 		cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
 	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
@@ -1064,7 +1104,7 @@  static int ingenic_drm_bind(struct device *dev, bool has_components)
 	}
 
 	regmap_config = ingenic_drm_regmap_config;
-	regmap_config.max_register = res->end - res->start;
+	regmap_config.max_register = res->end - res->start - 4;
 	priv->map = devm_regmap_init_mmio(dev, base,
 					  &regmap_config);
 	if (IS_ERR(priv->map)) {
@@ -1468,10 +1508,23 @@  static const struct jz_soc_info jz4770_soc_info = {
 	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
 };
 
+static const struct jz_soc_info jz4780_soc_info = {
+	.needs_dev_clk = true,
+	.has_osd = true,
+	.use_extended_hwdesc = true,
+	.max_width = 4096,
+	.max_height = 2048,
+	.formats_f1 = jz4770_formats_f1,
+	.num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
+	.formats_f0 = jz4770_formats_f0,
+	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
+};
+
 static const struct of_device_id ingenic_drm_of_match[] = {
 	{ .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
 	{ .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info },
 	{ .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info },
+	{ .compatible = "ingenic,jz4780-lcd", .data = &jz4780_soc_info },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, ingenic_drm_of_match);
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h b/drivers/gpu/drm/ingenic/ingenic-drm.h
index 22654ac1dde1c..cb1d09b625881 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm.h
+++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
@@ -44,8 +44,11 @@ 
 #define JZ_REG_LCD_XYP1				0x124
 #define JZ_REG_LCD_SIZE0			0x128
 #define JZ_REG_LCD_SIZE1			0x12c
+#define JZ_REG_LCD_PCFG				0x2c0
 
 #define JZ_LCD_CFG_SLCD				BIT(31)
+#define JZ_LCD_CFG_DESCRIPTOR_8			BIT(28)
+#define JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN	BIT(25)
 #define JZ_LCD_CFG_PS_DISABLE			BIT(23)
 #define JZ_LCD_CFG_CLS_DISABLE			BIT(22)
 #define JZ_LCD_CFG_SPL_DISABLE			BIT(21)
@@ -63,6 +66,7 @@ 
 #define JZ_LCD_CFG_DE_ACTIVE_LOW		BIT(9)
 #define JZ_LCD_CFG_VSYNC_ACTIVE_LOW		BIT(8)
 #define JZ_LCD_CFG_18_BIT			BIT(7)
+#define JZ_LCD_CFG_24_BIT			BIT(6)
 #define JZ_LCD_CFG_PDW				(BIT(5) | BIT(4))
 
 #define JZ_LCD_CFG_MODE_GENERIC_16BIT		0
@@ -132,6 +136,7 @@ 
 #define JZ_LCD_CMD_SOF_IRQ			BIT(31)
 #define JZ_LCD_CMD_EOF_IRQ			BIT(30)
 #define JZ_LCD_CMD_ENABLE_PAL			BIT(28)
+#define JZ_LCD_CMD_FRM_ENABLE			BIT(26)
 
 #define JZ_LCD_SYNC_MASK			0x3ff
 
@@ -153,6 +158,7 @@ 
 #define JZ_LCD_RGBC_EVEN_BGR			(0x5 << 0)
 
 #define JZ_LCD_OSDC_OSDEN			BIT(0)
+#define JZ_LCD_OSDC_ALPHAEN			BIT(2)
 #define JZ_LCD_OSDC_F0EN			BIT(3)
 #define JZ_LCD_OSDC_F1EN			BIT(4)
 
@@ -176,6 +182,38 @@ 
 #define JZ_LCD_SIZE01_WIDTH_LSB			0
 #define JZ_LCD_SIZE01_HEIGHT_LSB		16
 
+#define JZ_LCD_DESSIZE_ALPHA_OFFSET		24
+#define JZ_LCD_DESSIZE_HEIGHT_MASK		GENMASK(23, 12)
+#define JZ_LCD_DESSIZE_WIDTH_MASK		GENMASK(11, 0)
+
+#define JZ_LCD_CPOS_BPP_15_16			(4 << 27)
+#define JZ_LCD_CPOS_BPP_18_24			(5 << 27)
+#define JZ_LCD_CPOS_BPP_30			(7 << 27)
+#define JZ_LCD_CPOS_RGB555			BIT(30)
+#define JZ_LCD_CPOS_PREMULTIPLY_LCD		BIT(26)
+#define JZ_LCD_CPOS_COEFFICIENT_OFFSET		24
+#define JZ_LCD_CPOS_COEFFICIENT_0		0
+#define JZ_LCD_CPOS_COEFFICIENT_1		1
+#define JZ_LCD_CPOS_COEFFICIENT_ALPHA1		2
+#define JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1	3
+
+#define JZ_LCD_RGBC_RGB_PADDING			BIT(15)
+#define JZ_LCD_RGBC_RGB_PADDING_FIRST		BIT(14)
+#define JZ_LCD_RGBC_422				BIT(8)
+#define JZ_LCD_RGBC_RGB_FORMAT_ENABLE		BIT(7)
+
+#define JZ_LCD_PCFG_PRI_MODE			BIT(31)
+#define JZ_LCD_PCFG_HP_BST_4			(0 << 28)
+#define JZ_LCD_PCFG_HP_BST_8			(1 << 28)
+#define JZ_LCD_PCFG_HP_BST_16			(2 << 28)
+#define JZ_LCD_PCFG_HP_BST_32			(3 << 28)
+#define JZ_LCD_PCFG_HP_BST_64			(4 << 28)
+#define JZ_LCD_PCFG_HP_BST_16_CONT		(5 << 28)
+#define JZ_LCD_PCFG_HP_BST_DISABLE		(7 << 28)
+#define JZ_LCD_PCFG_THRESHOLD2_OFFSET		18
+#define JZ_LCD_PCFG_THRESHOLD1_OFFSET		9
+#define JZ_LCD_PCFG_THRESHOLD0_OFFSET		0
+
 struct device;
 struct drm_plane;
 struct drm_plane_state;