Message ID | 20211106183802.893285-2-aford173@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | arm64: imx8mm: Enable Hantro VPUs | expand |
On Sat, Nov 6, 2021 at 1:38 PM Adam Ford <aford173@gmail.com> wrote: > > The i.MX8M Mini has a similar implementation of the Hantro G1 and > G2 decoders, but the Mini uses the vpu-blk-ctrl for handling the > VPU resets through the power domain system. As such, there are > functions present in the 8MQ that are not applicable to the Mini > which requires the driver to have a different compatible flags. > + Nicolas Dufresne From what I can tell, the implementation between 8MQ and 8MM for the G2 is basically the same with the only be difference being the power-domain controller handling the vpu-blk-ctrl stuff in the Mini. It doesn't hang, so I don't think the power-domain is a problem, but the G2 throws some splat when v4l2-compliance is invoked. # v4l2-compliance -d1 v4l2-compliance SHA: not available , 64 bits, 64-bit time_t Compliance test for hantro-vpu device /dev/video1: Driver Info: Driver name : hantro-vpu Card type : nxp,imx8mm-vpu-g2-dec Bus info : platform: hantro-vpu Driver v[ 30.136983] ------------[ cut here ]------------ [ 30.142038] WARNING: CPU: 3 PID: 534 at mm/page_alloc.c:5344 __alloc_pages+0x5b4/0xbe0 [ 30.149971] Modules linked in: 8021q garp mrp stp llc af_alg caam_jr caamhash_desc caamalg_desc crypto_engine rng_core authenc libdes crct10dif_ce snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_simple_card_utils fsl_imx8_ddr_perf imx8m_ddrc hantro_vpu(C) v4l2_h264 brcmfmac v4l2_mem2mem videobuf2_vmalloc brcmutil videobuf2_dma_contig cfg80211 videobuf2_memops videobuf2_v4l2 videobuf2_common snd_soc_wm8962 videodev hci_uart mc etnaviv gpu_sched btqca btbcm caam rtc_pcf85363 clk_bd718x7 at24 spi_imx spi_bitbang rtc_snvs error snvs_pwrkey snd_soc_fsl_sai imx_pcm_dma imx8mm_thermal imx_cpufreq_dt bluetooth ecdh_generic ecc rfkill fuse drm ipv6 [ 30.206845] CPU: 3 PID: 534 Comm: v4l2-compliance Tainted: G C 5.16.0-rc1-00292-gb166e5dc4755-dirty #19 [ 30.217544] Hardware name: Beacon EmbeddedWorks i.MX8M Mini Development Kit (DT) [ 30.224940] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 30.231904] pc : __alloc_pages+0x5b4/0xbe0 [ 30.236007] lr : __dma_direct_alloc_pages+0x17c/0x1e0 [ 30.241065] sp : ffff80001265b810 [ 30.244379] x29: ffff80001265b810 x28: 0000000000000034 x27: ffff00000b9ec220 [ 30.251523] x26: ffff00000038d810 x25: 0000000000000000 x24: ffff00000038d810 [ 30.258668] x23: ffff80001010c52c x22: ffff00000038d810 x21: 00000000ffffffff [ 30.265813] x20: 0000000000000cc1 x19: 0000000000000000 x18: 0000000000000000 [ 30.272960] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 30.280101] x14: 0000000000000001 x13: 0000000000000000 x12: 0000000000000000 ersion : 5.16.0 Capabilities [ 30.287247] x11: ffff80001231d000 x10: ffff00000b9ec33a x9 : ffff00000b9ec32a [ 30.297242] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000cc0 [ 30.304385] x5 : 00000000bfffffff x4 : ffff00000a72f000 x3 : 0000000000000000 [ 30.311529] x2 : 0000000000000000 x1 : 0000000000000001 x0 : 0000000000000cc1 [ 30.318676] Call trace: [ 30.321124] __alloc_pages+0x5b4/0xbe0 [ 30.324880] __dma_direct_alloc_pages+0x17c/0x1e0 [ 30.329588] dma_direct_alloc+0x70/0x310 [ 30.333514] dma_alloc_attrs+0x7c/0xe4 [ 30.337266] hantro_hevc_get_ref_buf+0x15c/0x184 [hantro_vpu] [ 30.343038] hantro_g2_hevc_dec_run+0x3b8/0x1910 [hantro_vpu] [ 30.348805] device_run+0xac/0x110 [hantro_vpu] [ 30.353354] v4l2_m2m_try_run+0x84/0x134 [v4l2_mem2mem] [ 30.358603] v4l2_m2m_ioctl_streamon+0x84/0xa0 [v4l2_mem2mem] [ 30.364368] v4l_streamon+0x28/0x34 [videodev] [ 30.368874] __video_do_ioctl+0x178/0x3dc [videodev] [ 30.373889] video_usercopy+0x368/0x6dc [videodev] [ 30.378734] video_ioctl2+0x1c/0x30 [videodev] [ 30.383230] v4l2_ioctl+0x44/0x64 [videodev] [ 30.387554] __arm64_sys_ioctl+0xac/0xf0 [ 30.391482] invoke_syscall+0x48/0x114 [ 30.395238] el0_svc_common.constprop.0+0xd4/0xfc [ 30.399947] do_el0_svc+0x2c/0x94 [ 30.403264] el0_svc+0x28/0x80 [ 30.406327] el0t_64_sync_handler+0xa8/0x130 [ 30.410603] el0t_64_sync+0x1a0/0x1a4 [ 30.414272] ---[ end trace 878112336a378214 ]--- I was hoping someone might have some suggestions on something to try.. thanks, adam > Signed-off-by: Adam Ford <aford173@gmail.com> > --- > drivers/staging/media/hantro/hantro_drv.c | 2 + > drivers/staging/media/hantro/hantro_hw.h | 2 + > drivers/staging/media/hantro/imx8m_vpu_hw.c | 60 +++++++++++++++++++++ > 3 files changed, 64 insertions(+) > > diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c > index fb82b9297a2b..2aa1c520be50 100644 > --- a/drivers/staging/media/hantro/hantro_drv.c > +++ b/drivers/staging/media/hantro/hantro_drv.c > @@ -592,6 +592,8 @@ static const struct of_device_id of_hantro_match[] = { > { .compatible = "rockchip,rk3399-vpu", .data = &rk3399_vpu_variant, }, > #endif > #ifdef CONFIG_VIDEO_HANTRO_IMX8M > + { .compatible = "nxp,imx8mm-vpu", .data = &imx8mm_vpu_variant, }, > + { .compatible = "nxp,imx8mm-vpu-g2", .data = &imx8mm_vpu_g2_variant }, > { .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, }, > { .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant }, > #endif > diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h > index 267a6d33a47b..ae7c3fff760c 100644 > --- a/drivers/staging/media/hantro/hantro_hw.h > +++ b/drivers/staging/media/hantro/hantro_hw.h > @@ -211,6 +211,8 @@ enum hantro_enc_fmt { > ROCKCHIP_VPU_ENC_FMT_UYVY422 = 3, > }; > > +extern const struct hantro_variant imx8mm_vpu_g2_variant; > +extern const struct hantro_variant imx8mm_vpu_variant; > extern const struct hantro_variant imx8mq_vpu_g2_variant; > extern const struct hantro_variant imx8mq_vpu_variant; > extern const struct hantro_variant px30_vpu_variant; > diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c > index ea919bfb9891..c819609d14d1 100644 > --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c > +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c > @@ -242,6 +242,32 @@ static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = { > }, > }; > > +static const struct hantro_codec_ops imx8mm_vpu_codec_ops[] = { > + [HANTRO_MODE_MPEG2_DEC] = { > + .run = hantro_g1_mpeg2_dec_run, > + .init = hantro_mpeg2_dec_init, > + .exit = hantro_mpeg2_dec_exit, > + }, > + [HANTRO_MODE_VP8_DEC] = { > + .run = hantro_g1_vp8_dec_run, > + .init = hantro_vp8_dec_init, > + .exit = hantro_vp8_dec_exit, > + }, > + [HANTRO_MODE_H264_DEC] = { > + .run = hantro_g1_h264_dec_run, > + .init = hantro_h264_dec_init, > + .exit = hantro_h264_dec_exit, > + }, > +}; > + > +static const struct hantro_codec_ops imx8mm_vpu_g2_codec_ops[] = { > + [HANTRO_MODE_HEVC_DEC] = { > + .run = hantro_g2_hevc_dec_run, > + .init = hantro_hevc_dec_init, > + .exit = hantro_hevc_dec_exit, > + }, > +}; > + > /* > * VPU variants. > */ > @@ -257,6 +283,11 @@ static const struct hantro_irq imx8mq_g2_irqs[] = { > static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" }; > static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" }; > > +static const char * const imx8mm_g1_clk_names[] = { "g1", "bus" }; > +static const char * const imx8mm_g1_reg_names[] = { "g1" }; > +static const char * const imx8mm_g2_clk_names[] = { "g2", "bus" }; > +static const char * const imx8mm_g2_reg_names[] = { "g2" }; > + > const struct hantro_variant imx8mq_vpu_variant = { > .dec_fmts = imx8m_vpu_dec_fmts, > .num_dec_fmts = ARRAY_SIZE(imx8m_vpu_dec_fmts), > @@ -289,3 +320,32 @@ const struct hantro_variant imx8mq_vpu_g2_variant = { > .clk_names = imx8mq_clk_names, > .num_clocks = ARRAY_SIZE(imx8mq_clk_names), > }; > + > +const struct hantro_variant imx8mm_vpu_variant = { > + .dec_fmts = imx8m_vpu_dec_fmts, > + .num_dec_fmts = ARRAY_SIZE(imx8m_vpu_dec_fmts), > + .postproc_fmts = imx8m_vpu_postproc_fmts, > + .num_postproc_fmts = ARRAY_SIZE(imx8m_vpu_postproc_fmts), > + .postproc_regs = &hantro_g1_postproc_regs, > + .codec = HANTRO_MPEG2_DECODER | HANTRO_VP8_DECODER | > + HANTRO_H264_DECODER, > + .codec_ops = imx8mm_vpu_codec_ops, > + .irqs = imx8mq_irqs, > + .num_irqs = ARRAY_SIZE(imx8mq_irqs), > + .clk_names = imx8mm_g1_clk_names, > + .num_clocks = ARRAY_SIZE(imx8mm_g1_clk_names), > + .reg_names = imx8mm_g1_reg_names, > + .num_regs = ARRAY_SIZE(imx8mm_g1_reg_names) > +}; > + > +const struct hantro_variant imx8mm_vpu_g2_variant = { > + .dec_offset = 0x0, > + .dec_fmts = imx8m_vpu_g2_dec_fmts, > + .num_dec_fmts = ARRAY_SIZE(imx8m_vpu_g2_dec_fmts), > + .codec = HANTRO_HEVC_DECODER, > + .codec_ops = imx8mm_vpu_g2_codec_ops, > + .irqs = imx8mq_g2_irqs, > + .num_irqs = ARRAY_SIZE(imx8mq_g2_irqs), > + .clk_names = imx8mm_g2_clk_names, > + .num_clocks = ARRAY_SIZE(imx8mm_g2_reg_names), > +}; > -- > 2.32.0 >
On 20/11/2021 17:03, Adam Ford wrote: > On Sat, Nov 6, 2021 at 1:38 PM Adam Ford <aford173@gmail.com> wrote: >> >> The i.MX8M Mini has a similar implementation of the Hantro G1 and >> G2 decoders, but the Mini uses the vpu-blk-ctrl for handling the >> VPU resets through the power domain system. As such, there are >> functions present in the 8MQ that are not applicable to the Mini >> which requires the driver to have a different compatible flags. >> > + Nicolas Dufresne > > From what I can tell, the implementation between 8MQ and 8MM for the > G2 is basically the same with the only be difference being the > power-domain controller handling the vpu-blk-ctrl stuff in the Mini. > It doesn't hang, so I don't think the power-domain is a problem, but > the G2 throws some splat when v4l2-compliance is invoked. > > # v4l2-compliance -d1 > v4l2-compliance SHA: not available That indicates that you did not compile v4l2-compliance from the git repo. Please do that, that way I know you are using the latest compliance test. git clone git://linuxtv.org/v4l-utils.git cd v4l-utils ./bootstrap.sh ./configure make sudo make install > , 64 bits, 64-bit time_t > > Compliance test for hantro-vpu device /dev/video1: > > Driver Info: > Driver name : hantro-vpu > Card type : nxp,imx8mm-vpu-g2-dec > Bus info : platform: hantro-vpu > > Driver v[ 30.136983] ------------[ cut here ]------------ > [ 30.142038] WARNING: CPU: 3 PID: 534 at mm/page_alloc.c:5344 > __alloc_pages+0x5b4/0xbe0 Hmm: if (unlikely(order >= MAX_ORDER)) { WARN_ON_ONCE(!(gfp & __GFP_NOWARN)); return NULL; } video needs loads of memory, so if MAX_ORDER is too low it might hit this. It's tied to kernel config option FORCE_MAX_ZONEORDER. The hantro driver uses vb2_dma_contig_memops, so the memory has to be physically contiguous. That does indeed typically require larger MAX_ORDER values. Regards, Hans > [ 30.149971] Modules linked in: 8021q garp mrp stp llc af_alg > caam_jr caamhash_desc caamalg_desc crypto_engine rng_core authenc > libdes crct10dif_ce snd_soc_fsl_asoc_card snd_soc_imx_audmux > snd_soc_simple_card_utils fsl_imx8_ddr_perf imx8m_ddrc hantro_vpu(C) > v4l2_h264 brcmfmac v4l2_mem2mem videobuf2_vmalloc brcmutil > videobuf2_dma_contig cfg80211 videobuf2_memops videobuf2_v4l2 > videobuf2_common snd_soc_wm8962 videodev hci_uart mc etnaviv gpu_sched > btqca btbcm caam rtc_pcf85363 clk_bd718x7 at24 spi_imx spi_bitbang > rtc_snvs error snvs_pwrkey snd_soc_fsl_sai imx_pcm_dma imx8mm_thermal > imx_cpufreq_dt bluetooth ecdh_generic ecc rfkill fuse drm ipv6 > [ 30.206845] CPU: 3 PID: 534 Comm: v4l2-compliance Tainted: G > C 5.16.0-rc1-00292-gb166e5dc4755-dirty #19 > [ 30.217544] Hardware name: Beacon EmbeddedWorks i.MX8M Mini > Development Kit (DT) > [ 30.224940] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) > [ 30.231904] pc : __alloc_pages+0x5b4/0xbe0 > [ 30.236007] lr : __dma_direct_alloc_pages+0x17c/0x1e0 > [ 30.241065] sp : ffff80001265b810 > [ 30.244379] x29: ffff80001265b810 x28: 0000000000000034 x27: ffff00000b9ec220 > [ 30.251523] x26: ffff00000038d810 x25: 0000000000000000 x24: ffff00000038d810 > [ 30.258668] x23: ffff80001010c52c x22: ffff00000038d810 x21: 00000000ffffffff > [ 30.265813] x20: 0000000000000cc1 x19: 0000000000000000 x18: 0000000000000000 > [ 30.272960] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 > [ 30.280101] x14: 0000000000000001 x13: 0000000000000000 x12: 0000000000000000 > ersion : 5.16.0 > Capabilities [ 30.287247] x11: ffff80001231d000 x10: > ffff00000b9ec33a x9 : ffff00000b9ec32a > [ 30.297242] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000cc0 > [ 30.304385] x5 : 00000000bfffffff x4 : ffff00000a72f000 x3 : 0000000000000000 > [ 30.311529] x2 : 0000000000000000 x1 : 0000000000000001 x0 : 0000000000000cc1 > [ 30.318676] Call trace: > [ 30.321124] __alloc_pages+0x5b4/0xbe0 > [ 30.324880] __dma_direct_alloc_pages+0x17c/0x1e0 > [ 30.329588] dma_direct_alloc+0x70/0x310 > [ 30.333514] dma_alloc_attrs+0x7c/0xe4 > [ 30.337266] hantro_hevc_get_ref_buf+0x15c/0x184 [hantro_vpu] > [ 30.343038] hantro_g2_hevc_dec_run+0x3b8/0x1910 [hantro_vpu] > [ 30.348805] device_run+0xac/0x110 [hantro_vpu] > [ 30.353354] v4l2_m2m_try_run+0x84/0x134 [v4l2_mem2mem] > [ 30.358603] v4l2_m2m_ioctl_streamon+0x84/0xa0 [v4l2_mem2mem] > [ 30.364368] v4l_streamon+0x28/0x34 [videodev] > [ 30.368874] __video_do_ioctl+0x178/0x3dc [videodev] > [ 30.373889] video_usercopy+0x368/0x6dc [videodev] > [ 30.378734] video_ioctl2+0x1c/0x30 [videodev] > [ 30.383230] v4l2_ioctl+0x44/0x64 [videodev] > [ 30.387554] __arm64_sys_ioctl+0xac/0xf0 > [ 30.391482] invoke_syscall+0x48/0x114 > [ 30.395238] el0_svc_common.constprop.0+0xd4/0xfc > [ 30.399947] do_el0_svc+0x2c/0x94 > [ 30.403264] el0_svc+0x28/0x80 > [ 30.406327] el0t_64_sync_handler+0xa8/0x130 > [ 30.410603] el0t_64_sync+0x1a0/0x1a4 > [ 30.414272] ---[ end trace 878112336a378214 ]--- > > I was hoping someone might have some suggestions on something to try.. > > thanks, > > adam >> Signed-off-by: Adam Ford <aford173@gmail.com> >> --- >> drivers/staging/media/hantro/hantro_drv.c | 2 + >> drivers/staging/media/hantro/hantro_hw.h | 2 + >> drivers/staging/media/hantro/imx8m_vpu_hw.c | 60 +++++++++++++++++++++ >> 3 files changed, 64 insertions(+) >> >> diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c >> index fb82b9297a2b..2aa1c520be50 100644 >> --- a/drivers/staging/media/hantro/hantro_drv.c >> +++ b/drivers/staging/media/hantro/hantro_drv.c >> @@ -592,6 +592,8 @@ static const struct of_device_id of_hantro_match[] = { >> { .compatible = "rockchip,rk3399-vpu", .data = &rk3399_vpu_variant, }, >> #endif >> #ifdef CONFIG_VIDEO_HANTRO_IMX8M >> + { .compatible = "nxp,imx8mm-vpu", .data = &imx8mm_vpu_variant, }, >> + { .compatible = "nxp,imx8mm-vpu-g2", .data = &imx8mm_vpu_g2_variant }, >> { .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, }, >> { .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant }, >> #endif >> diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h >> index 267a6d33a47b..ae7c3fff760c 100644 >> --- a/drivers/staging/media/hantro/hantro_hw.h >> +++ b/drivers/staging/media/hantro/hantro_hw.h >> @@ -211,6 +211,8 @@ enum hantro_enc_fmt { >> ROCKCHIP_VPU_ENC_FMT_UYVY422 = 3, >> }; >> >> +extern const struct hantro_variant imx8mm_vpu_g2_variant; >> +extern const struct hantro_variant imx8mm_vpu_variant; >> extern const struct hantro_variant imx8mq_vpu_g2_variant; >> extern const struct hantro_variant imx8mq_vpu_variant; >> extern const struct hantro_variant px30_vpu_variant; >> diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c >> index ea919bfb9891..c819609d14d1 100644 >> --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c >> +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c >> @@ -242,6 +242,32 @@ static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = { >> }, >> }; >> >> +static const struct hantro_codec_ops imx8mm_vpu_codec_ops[] = { >> + [HANTRO_MODE_MPEG2_DEC] = { >> + .run = hantro_g1_mpeg2_dec_run, >> + .init = hantro_mpeg2_dec_init, >> + .exit = hantro_mpeg2_dec_exit, >> + }, >> + [HANTRO_MODE_VP8_DEC] = { >> + .run = hantro_g1_vp8_dec_run, >> + .init = hantro_vp8_dec_init, >> + .exit = hantro_vp8_dec_exit, >> + }, >> + [HANTRO_MODE_H264_DEC] = { >> + .run = hantro_g1_h264_dec_run, >> + .init = hantro_h264_dec_init, >> + .exit = hantro_h264_dec_exit, >> + }, >> +}; >> + >> +static const struct hantro_codec_ops imx8mm_vpu_g2_codec_ops[] = { >> + [HANTRO_MODE_HEVC_DEC] = { >> + .run = hantro_g2_hevc_dec_run, >> + .init = hantro_hevc_dec_init, >> + .exit = hantro_hevc_dec_exit, >> + }, >> +}; >> + >> /* >> * VPU variants. >> */ >> @@ -257,6 +283,11 @@ static const struct hantro_irq imx8mq_g2_irqs[] = { >> static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" }; >> static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" }; >> >> +static const char * const imx8mm_g1_clk_names[] = { "g1", "bus" }; >> +static const char * const imx8mm_g1_reg_names[] = { "g1" }; >> +static const char * const imx8mm_g2_clk_names[] = { "g2", "bus" }; >> +static const char * const imx8mm_g2_reg_names[] = { "g2" }; >> + >> const struct hantro_variant imx8mq_vpu_variant = { >> .dec_fmts = imx8m_vpu_dec_fmts, >> .num_dec_fmts = ARRAY_SIZE(imx8m_vpu_dec_fmts), >> @@ -289,3 +320,32 @@ const struct hantro_variant imx8mq_vpu_g2_variant = { >> .clk_names = imx8mq_clk_names, >> .num_clocks = ARRAY_SIZE(imx8mq_clk_names), >> }; >> + >> +const struct hantro_variant imx8mm_vpu_variant = { >> + .dec_fmts = imx8m_vpu_dec_fmts, >> + .num_dec_fmts = ARRAY_SIZE(imx8m_vpu_dec_fmts), >> + .postproc_fmts = imx8m_vpu_postproc_fmts, >> + .num_postproc_fmts = ARRAY_SIZE(imx8m_vpu_postproc_fmts), >> + .postproc_regs = &hantro_g1_postproc_regs, >> + .codec = HANTRO_MPEG2_DECODER | HANTRO_VP8_DECODER | >> + HANTRO_H264_DECODER, >> + .codec_ops = imx8mm_vpu_codec_ops, >> + .irqs = imx8mq_irqs, >> + .num_irqs = ARRAY_SIZE(imx8mq_irqs), >> + .clk_names = imx8mm_g1_clk_names, >> + .num_clocks = ARRAY_SIZE(imx8mm_g1_clk_names), >> + .reg_names = imx8mm_g1_reg_names, >> + .num_regs = ARRAY_SIZE(imx8mm_g1_reg_names) >> +}; >> + >> +const struct hantro_variant imx8mm_vpu_g2_variant = { >> + .dec_offset = 0x0, >> + .dec_fmts = imx8m_vpu_g2_dec_fmts, >> + .num_dec_fmts = ARRAY_SIZE(imx8m_vpu_g2_dec_fmts), >> + .codec = HANTRO_HEVC_DECODER, >> + .codec_ops = imx8mm_vpu_g2_codec_ops, >> + .irqs = imx8mq_g2_irqs, >> + .num_irqs = ARRAY_SIZE(imx8mq_g2_irqs), >> + .clk_names = imx8mm_g2_clk_names, >> + .num_clocks = ARRAY_SIZE(imx8mm_g2_reg_names), >> +}; >> -- >> 2.32.0 >>
diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c index fb82b9297a2b..2aa1c520be50 100644 --- a/drivers/staging/media/hantro/hantro_drv.c +++ b/drivers/staging/media/hantro/hantro_drv.c @@ -592,6 +592,8 @@ static const struct of_device_id of_hantro_match[] = { { .compatible = "rockchip,rk3399-vpu", .data = &rk3399_vpu_variant, }, #endif #ifdef CONFIG_VIDEO_HANTRO_IMX8M + { .compatible = "nxp,imx8mm-vpu", .data = &imx8mm_vpu_variant, }, + { .compatible = "nxp,imx8mm-vpu-g2", .data = &imx8mm_vpu_g2_variant }, { .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, }, { .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant }, #endif diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h index 267a6d33a47b..ae7c3fff760c 100644 --- a/drivers/staging/media/hantro/hantro_hw.h +++ b/drivers/staging/media/hantro/hantro_hw.h @@ -211,6 +211,8 @@ enum hantro_enc_fmt { ROCKCHIP_VPU_ENC_FMT_UYVY422 = 3, }; +extern const struct hantro_variant imx8mm_vpu_g2_variant; +extern const struct hantro_variant imx8mm_vpu_variant; extern const struct hantro_variant imx8mq_vpu_g2_variant; extern const struct hantro_variant imx8mq_vpu_variant; extern const struct hantro_variant px30_vpu_variant; diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c index ea919bfb9891..c819609d14d1 100644 --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c @@ -242,6 +242,32 @@ static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = { }, }; +static const struct hantro_codec_ops imx8mm_vpu_codec_ops[] = { + [HANTRO_MODE_MPEG2_DEC] = { + .run = hantro_g1_mpeg2_dec_run, + .init = hantro_mpeg2_dec_init, + .exit = hantro_mpeg2_dec_exit, + }, + [HANTRO_MODE_VP8_DEC] = { + .run = hantro_g1_vp8_dec_run, + .init = hantro_vp8_dec_init, + .exit = hantro_vp8_dec_exit, + }, + [HANTRO_MODE_H264_DEC] = { + .run = hantro_g1_h264_dec_run, + .init = hantro_h264_dec_init, + .exit = hantro_h264_dec_exit, + }, +}; + +static const struct hantro_codec_ops imx8mm_vpu_g2_codec_ops[] = { + [HANTRO_MODE_HEVC_DEC] = { + .run = hantro_g2_hevc_dec_run, + .init = hantro_hevc_dec_init, + .exit = hantro_hevc_dec_exit, + }, +}; + /* * VPU variants. */ @@ -257,6 +283,11 @@ static const struct hantro_irq imx8mq_g2_irqs[] = { static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" }; static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" }; +static const char * const imx8mm_g1_clk_names[] = { "g1", "bus" }; +static const char * const imx8mm_g1_reg_names[] = { "g1" }; +static const char * const imx8mm_g2_clk_names[] = { "g2", "bus" }; +static const char * const imx8mm_g2_reg_names[] = { "g2" }; + const struct hantro_variant imx8mq_vpu_variant = { .dec_fmts = imx8m_vpu_dec_fmts, .num_dec_fmts = ARRAY_SIZE(imx8m_vpu_dec_fmts), @@ -289,3 +320,32 @@ const struct hantro_variant imx8mq_vpu_g2_variant = { .clk_names = imx8mq_clk_names, .num_clocks = ARRAY_SIZE(imx8mq_clk_names), }; + +const struct hantro_variant imx8mm_vpu_variant = { + .dec_fmts = imx8m_vpu_dec_fmts, + .num_dec_fmts = ARRAY_SIZE(imx8m_vpu_dec_fmts), + .postproc_fmts = imx8m_vpu_postproc_fmts, + .num_postproc_fmts = ARRAY_SIZE(imx8m_vpu_postproc_fmts), + .postproc_regs = &hantro_g1_postproc_regs, + .codec = HANTRO_MPEG2_DECODER | HANTRO_VP8_DECODER | + HANTRO_H264_DECODER, + .codec_ops = imx8mm_vpu_codec_ops, + .irqs = imx8mq_irqs, + .num_irqs = ARRAY_SIZE(imx8mq_irqs), + .clk_names = imx8mm_g1_clk_names, + .num_clocks = ARRAY_SIZE(imx8mm_g1_clk_names), + .reg_names = imx8mm_g1_reg_names, + .num_regs = ARRAY_SIZE(imx8mm_g1_reg_names) +}; + +const struct hantro_variant imx8mm_vpu_g2_variant = { + .dec_offset = 0x0, + .dec_fmts = imx8m_vpu_g2_dec_fmts, + .num_dec_fmts = ARRAY_SIZE(imx8m_vpu_g2_dec_fmts), + .codec = HANTRO_HEVC_DECODER, + .codec_ops = imx8mm_vpu_g2_codec_ops, + .irqs = imx8mq_g2_irqs, + .num_irqs = ARRAY_SIZE(imx8mq_g2_irqs), + .clk_names = imx8mm_g2_clk_names, + .num_clocks = ARRAY_SIZE(imx8mm_g2_reg_names), +};
The i.MX8M Mini has a similar implementation of the Hantro G1 and G2 decoders, but the Mini uses the vpu-blk-ctrl for handling the VPU resets through the power domain system. As such, there are functions present in the 8MQ that are not applicable to the Mini which requires the driver to have a different compatible flags. Signed-off-by: Adam Ford <aford173@gmail.com> --- drivers/staging/media/hantro/hantro_drv.c | 2 + drivers/staging/media/hantro/hantro_hw.h | 2 + drivers/staging/media/hantro/imx8m_vpu_hw.c | 60 +++++++++++++++++++++ 3 files changed, 64 insertions(+)