Message ID | 20211130100159.214489-2-jbrunet@baylibre.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | arm64: dts: meson: p241: add internal sound support | expand |
On 30/11/2021 11:01, Jerome Brunet wrote: > Add the VCC_5V regulator, which feeds the HDMI, USB and audio amplifier. > > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > --- > .../arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts > index eb7f5a3fefd4..9d0684a8264b 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts > @@ -84,6 +84,14 @@ vcc_3v3: regulator-vcc_3v3 { > regulator-max-microvolt = <3300000>; > }; > > + vcc_5v: regulator-vcc-5v { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_5V"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + > emmc_pwrseq: emmc-pwrseq { > compatible = "mmc-pwrseq-emmc"; > reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; > @@ -136,6 +144,7 @@ &hdmi_tx { > status = "okay"; > pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; > pinctrl-names = "default"; > + hdmi-supply = <&vcc_5v>; > }; > > &hdmi_tx_tmds_port { > @@ -220,3 +229,7 @@ &usb { > status = "okay"; > dr_mode = "host"; > }; > + > +&usb2_phy0 { > + phy-supply = <&vcc_5v>; > +}; > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts index eb7f5a3fefd4..9d0684a8264b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts @@ -84,6 +84,14 @@ vcc_3v3: regulator-vcc_3v3 { regulator-max-microvolt = <3300000>; }; + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; @@ -136,6 +144,7 @@ &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; }; &hdmi_tx_tmds_port { @@ -220,3 +229,7 @@ &usb { status = "okay"; dr_mode = "host"; }; + +&usb2_phy0 { + phy-supply = <&vcc_5v>; +};
Add the VCC_5V regulator, which feeds the HDMI, USB and audio amplifier. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- .../arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+)