| Message ID | 1638179932-3353-4-git-send-email-srivasam@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Add pin control support for lpass sc7280 | expand |
On 29/11/2021 09:58, Srinivasa Rao Mandadapu wrote: > Update lpass lpi pin control driver to accommodate new lpass variant > SoC specific drivers. > Move sm8250 SoC specific functions to pinctrl-sm8250-lpass-lpi.c file > and common declarations to pinctrl-lpass-lpi.h header file. > > Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> > Co-developed-by: Venkata Prasad Potturu <potturu@codeaurora.org> > Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org> > --- > drivers/pinctrl/qcom/Makefile | 1 + > drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 251 +----------------------- > drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 139 +++++++++++++ > drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 125 ++++++++++++ > 4 files changed, 271 insertions(+), 245 deletions(-) > create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h > create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c > > diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile > index 7a12e8c..74568cf 100644 > --- a/drivers/pinctrl/qcom/Makefile > +++ b/drivers/pinctrl/qcom/Makefile > @@ -37,3 +37,4 @@ obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o > obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o > obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o > obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o > +obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o This is confusing, either we make new CONFIG_PINCTRL_SM8250_LPASS_LPI here and use it for pinctrl-sm8250-lpass-lpi.o > diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c > index 2f19ab4..2641489 100644 > --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c > +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c > @@ -4,237 +4,16 @@ > * Copyright (c) 2020 Linaro Ltd. > */ > > -#include <linux/bitops.h> > -#include <linux/bitfield.h> Looks like some of these are removed without a reason. > #include <linux/clk.h> > #include <linux/gpio/driver.h> > -#include <linux/io.h> > -#include <linux/module.h> > #include <linux/of_device.h> > -#include <linux/of.h> > #include <linux/pinctrl/pinconf-generic.h> > #include <linux/pinctrl/pinconf.h> > #include <linux/pinctrl/pinmux.h> > -#include <linux/platform_device.h> > -#include <linux/slab.h> > -#include <linux/types.h> > #include "../core.h" > #include "../pinctrl-utils.h" > +#include "pinctrl-lpass-lpi.h" ... > - > -module_platform_driver(lpi_pinctrl_driver); > -MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); > -MODULE_LICENSE("GPL"); if you build this as Modules your build would fail without MODULE_LICENSE(). > diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h > new file mode 100644 > index 0000000..b0afb40 > --- /dev/null > +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h > @@ -0,0 +1,139 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. > + * Copyright (c) 2020 Linaro Ltd. > + */ > +#ifndef __PINCTRL_LPASS_LPI_H__ > +#define __PINCTRL_LPASS_LPI_H__ > + > +#define LPI_SLEW_RATE_CTL_REG 0xa000 > +#define LPI_TLMM_REG_OFFSET 0x1000 > +#define LPI_SLEW_RATE_MAX 0x03 > +#define LPI_SLEW_BITS_SIZE 0x02 > +#define LPI_SLEW_RATE_MASK GENMASK(1, 0) > +#define LPI_GPIO_CFG_REG 0x00 > +#define LPI_GPIO_PULL_MASK GENMASK(1, 0) > +#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) > +#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) > +#define LPI_GPIO_OE_MASK BIT(9) > +#define LPI_GPIO_VALUE_REG 0x04 > +#define LPI_GPIO_VALUE_IN_MASK BIT(0) > +#define LPI_GPIO_VALUE_OUT_MASK BIT(1) > + > +#define LPI_GPIO_BIAS_DISABLE 0x0 > +#define LPI_GPIO_PULL_DOWN 0x1 > +#define LPI_GPIO_KEEPER 0x2 > +#define LPI_GPIO_PULL_UP 0x3 > +#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) > +#define NO_SLEW -1 > + > +#define LPI_FUNCTION(fname) \ > + [LPI_MUX_##fname] = { \ > + .name = #fname, \ > + .groups = fname##_groups, \ > + .ngroups = ARRAY_SIZE(fname##_groups), \ > + } > + > +#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ > + { \ > + .name = "gpio" #id, \ > + .pins = gpio##id##_pins, \ > + .pin = id, \ > + .slew_offset = soff, \ > + .npins = ARRAY_SIZE(gpio##id##_pins), \ > + .funcs = (int[]){ \ > + LPI_MUX_gpio, \ > + LPI_MUX_##f1, \ > + LPI_MUX_##f2, \ > + LPI_MUX_##f3, \ > + LPI_MUX_##f4, \ > + }, \ > + .nfuncs = 5, \ > + } > + > +struct lpi_pingroup { > + const char *name; > + const unsigned int *pins; > + unsigned int npins; > + unsigned int pin; > + /* Bit offset in slew register for SoundWire pins only */ > + int slew_offset; > + unsigned int *funcs; > + unsigned int nfuncs; > +}; > + > +struct lpi_function { > + const char *name; > + const char * const *groups; > + unsigned int ngroups; > +}; > + > +struct lpi_pinctrl_variant_data { > + const struct pinctrl_pin_desc *pins; > + int npins; > + const struct lpi_pingroup *groups; > + int ngroups; > + const struct lpi_function *functions; > + int nfunctions; > +}; > + > +#define MAX_LPI_NUM_CLKS 2 > + > +struct lpi_pinctrl { > + struct device *dev; > + struct pinctrl_dev *ctrl; > + struct gpio_chip chip; > + struct pinctrl_desc desc; > + char __iomem *tlmm_base; > + char __iomem *slew_base; > + struct clk_bulk_data clks[MAX_LPI_NUM_CLKS]; > + struct mutex slew_access_lock; > + const struct lpi_pinctrl_variant_data *data; > +}; > + From here <<< > +enum lpass_lpi_functions { > + LPI_MUX_dmic1_clk, > + LPI_MUX_dmic1_data, > + LPI_MUX_dmic2_clk, > + LPI_MUX_dmic2_data, > + LPI_MUX_dmic3_clk, > + LPI_MUX_dmic3_data, > + LPI_MUX_i2s1_clk, > + LPI_MUX_i2s1_data, > + LPI_MUX_i2s1_ws, > + LPI_MUX_i2s2_clk, > + LPI_MUX_i2s2_data, > + LPI_MUX_i2s2_ws, > + LPI_MUX_qua_mi2s_data, > + LPI_MUX_qua_mi2s_sclk, > + LPI_MUX_qua_mi2s_ws, > + LPI_MUX_swr_rx_clk, > + LPI_MUX_swr_rx_data, > + LPI_MUX_swr_tx_clk, > + LPI_MUX_swr_tx_data, > + LPI_MUX_wsa_swr_clk, > + LPI_MUX_wsa_swr_data, > + LPI_MUX_gpio, > + LPI_MUX__, > +}; > + > +static const unsigned int gpio0_pins[] = { 0 }; > +static const unsigned int gpio1_pins[] = { 1 }; > +static const unsigned int gpio2_pins[] = { 2 }; > +static const unsigned int gpio3_pins[] = { 3 }; > +static const unsigned int gpio4_pins[] = { 4 }; > +static const unsigned int gpio5_pins[] = { 5 }; > +static const unsigned int gpio6_pins[] = { 6 }; > +static const unsigned int gpio7_pins[] = { 7 }; > +static const unsigned int gpio8_pins[] = { 8 }; > +static const unsigned int gpio9_pins[] = { 9 }; > +static const unsigned int gpio10_pins[] = { 10 }; > +static const unsigned int gpio11_pins[] = { 11 }; > +static const unsigned int gpio12_pins[] = { 12 }; > +static const unsigned int gpio13_pins[] = { 13 }; >>> to here are specific to sm8250, so it should not be in header file to start with. > + > +int lpi_pinctrl_probe(struct platform_device *pdev); > +int lpi_pinctrl_remove(struct platform_device *pdev); > + > +#endif /*__PINCTRL_LPASS_LPI_H__*/ > + > diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c > new file mode 100644 > index 0000000..3eba8b3 > --- /dev/null > +++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c > @@ -0,0 +1,125 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* ... > + > +static struct platform_driver lpi_pinctrl_driver = { > + .driver = { > + .name = "qcom-sm8250-lpass-lpi-pinctrl", > + .of_match_table = lpi_pinctrl_of_match, > + }, > + .probe = lpi_pinctrl_probe, > + .remove = lpi_pinctrl_remove, > +}; > + > +module_platform_driver(lpi_pinctrl_driver); > +MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); may be : "SM8250 LPI GPIO pin control driver" --srini > +MODULE_LICENSE("GPL"); > + >
On 12/1/2021 4:11 PM, Srinivas Kandagatla wrote: Thanks for your time Srini!!! > > On 29/11/2021 09:58, Srinivasa Rao Mandadapu wrote: >> Update lpass lpi pin control driver to accommodate new lpass variant >> SoC specific drivers. >> Move sm8250 SoC specific functions to pinctrl-sm8250-lpass-lpi.c file >> and common declarations to pinctrl-lpass-lpi.h header file. >> >> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> >> Co-developed-by: Venkata Prasad Potturu <potturu@codeaurora.org> >> Signed-off-by: Venkata Prasad Potturu <potturu@codeaurora.org> >> --- >> drivers/pinctrl/qcom/Makefile | 1 + >> drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 251 >> +----------------------- >> drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 139 +++++++++++++ >> drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 125 ++++++++++++ >> 4 files changed, 271 insertions(+), 245 deletions(-) >> create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h >> create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c >> >> diff --git a/drivers/pinctrl/qcom/Makefile >> b/drivers/pinctrl/qcom/Makefile >> index 7a12e8c..74568cf 100644 >> --- a/drivers/pinctrl/qcom/Makefile >> +++ b/drivers/pinctrl/qcom/Makefile >> @@ -37,3 +37,4 @@ obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o >> obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o >> obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o >> obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o >> +obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o > > This is confusing, either we make new > CONFIG_PINCTRL_SM8250_LPASS_LPI here and use it for > pinctrl-sm8250-lpass-lpi.o Okay. Will add new config macro. Thought of changing it, but worried that existing platforms may get disturbed. > >> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c >> b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c >> index 2f19ab4..2641489 100644 >> --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c >> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c >> @@ -4,237 +4,16 @@ >> * Copyright (c) 2020 Linaro Ltd. >> */ >> -#include <linux/bitops.h> >> -#include <linux/bitfield.h> > > Looks like some of these are removed without a reason. > Actually, as functions distributed to different files, moved few of them to corresponding files, and observed few of them are not required. could you please suggest on this? > >> #include <linux/clk.h> >> #include <linux/gpio/driver.h> >> -#include <linux/io.h> >> -#include <linux/module.h> >> #include <linux/of_device.h> >> -#include <linux/of.h> >> #include <linux/pinctrl/pinconf-generic.h> >> #include <linux/pinctrl/pinconf.h> >> #include <linux/pinctrl/pinmux.h> >> -#include <linux/platform_device.h> >> -#include <linux/slab.h> >> -#include <linux/types.h> >> #include "../core.h" >> #include "../pinctrl-utils.h" >> +#include "pinctrl-lpass-lpi.h" > > ... > > >> - >> -module_platform_driver(lpi_pinctrl_driver); >> -MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); >> -MODULE_LICENSE("GPL"); > > if you build this as Modules your build would fail without > MODULE_LICENSE(). Okay. Will change accordingly. > > >> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h >> b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h >> new file mode 100644 >> index 0000000..b0afb40 >> --- /dev/null >> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h >> @@ -0,0 +1,139 @@ >> +/* SPDX-License-Identifier: GPL-2.0-only */ >> +/* >> + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. >> + * Copyright (c) 2020 Linaro Ltd. >> + */ >> +#ifndef __PINCTRL_LPASS_LPI_H__ >> +#define __PINCTRL_LPASS_LPI_H__ >> + >> +#define LPI_SLEW_RATE_CTL_REG 0xa000 >> +#define LPI_TLMM_REG_OFFSET 0x1000 >> +#define LPI_SLEW_RATE_MAX 0x03 >> +#define LPI_SLEW_BITS_SIZE 0x02 >> +#define LPI_SLEW_RATE_MASK GENMASK(1, 0) >> +#define LPI_GPIO_CFG_REG 0x00 >> +#define LPI_GPIO_PULL_MASK GENMASK(1, 0) >> +#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) >> +#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) >> +#define LPI_GPIO_OE_MASK BIT(9) >> +#define LPI_GPIO_VALUE_REG 0x04 >> +#define LPI_GPIO_VALUE_IN_MASK BIT(0) >> +#define LPI_GPIO_VALUE_OUT_MASK BIT(1) >> + >> +#define LPI_GPIO_BIAS_DISABLE 0x0 >> +#define LPI_GPIO_PULL_DOWN 0x1 >> +#define LPI_GPIO_KEEPER 0x2 >> +#define LPI_GPIO_PULL_UP 0x3 >> +#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) >> +#define NO_SLEW -1 >> + >> +#define LPI_FUNCTION(fname) \ >> + [LPI_MUX_##fname] = { \ >> + .name = #fname, \ >> + .groups = fname##_groups, \ >> + .ngroups = ARRAY_SIZE(fname##_groups), \ >> + } >> + >> +#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ >> + { \ >> + .name = "gpio" #id, \ >> + .pins = gpio##id##_pins, \ >> + .pin = id, \ >> + .slew_offset = soff, \ >> + .npins = ARRAY_SIZE(gpio##id##_pins), \ >> + .funcs = (int[]){ \ >> + LPI_MUX_gpio, \ >> + LPI_MUX_##f1, \ >> + LPI_MUX_##f2, \ >> + LPI_MUX_##f3, \ >> + LPI_MUX_##f4, \ >> + }, \ >> + .nfuncs = 5, \ >> + } >> + >> +struct lpi_pingroup { >> + const char *name; >> + const unsigned int *pins; >> + unsigned int npins; >> + unsigned int pin; >> + /* Bit offset in slew register for SoundWire pins only */ >> + int slew_offset; >> + unsigned int *funcs; >> + unsigned int nfuncs; >> +}; >> + >> +struct lpi_function { >> + const char *name; >> + const char * const *groups; >> + unsigned int ngroups; >> +}; >> + >> +struct lpi_pinctrl_variant_data { >> + const struct pinctrl_pin_desc *pins; >> + int npins; >> + const struct lpi_pingroup *groups; >> + int ngroups; >> + const struct lpi_function *functions; >> + int nfunctions; >> +}; >> + >> +#define MAX_LPI_NUM_CLKS 2 >> + >> +struct lpi_pinctrl { >> + struct device *dev; >> + struct pinctrl_dev *ctrl; >> + struct gpio_chip chip; >> + struct pinctrl_desc desc; >> + char __iomem *tlmm_base; >> + char __iomem *slew_base; >> + struct clk_bulk_data clks[MAX_LPI_NUM_CLKS]; >> + struct mutex slew_access_lock; >> + const struct lpi_pinctrl_variant_data *data; >> +}; >> + > > From here > <<< > >> +enum lpass_lpi_functions { >> + LPI_MUX_dmic1_clk, >> + LPI_MUX_dmic1_data, >> + LPI_MUX_dmic2_clk, >> + LPI_MUX_dmic2_data, >> + LPI_MUX_dmic3_clk, >> + LPI_MUX_dmic3_data, >> + LPI_MUX_i2s1_clk, >> + LPI_MUX_i2s1_data, >> + LPI_MUX_i2s1_ws, >> + LPI_MUX_i2s2_clk, >> + LPI_MUX_i2s2_data, >> + LPI_MUX_i2s2_ws, >> + LPI_MUX_qua_mi2s_data, >> + LPI_MUX_qua_mi2s_sclk, >> + LPI_MUX_qua_mi2s_ws, >> + LPI_MUX_swr_rx_clk, >> + LPI_MUX_swr_rx_data, >> + LPI_MUX_swr_tx_clk, >> + LPI_MUX_swr_tx_data, >> + LPI_MUX_wsa_swr_clk, >> + LPI_MUX_wsa_swr_data, >> + LPI_MUX_gpio, >> + LPI_MUX__, >> +}; >> + >> +static const unsigned int gpio0_pins[] = { 0 }; >> +static const unsigned int gpio1_pins[] = { 1 }; >> +static const unsigned int gpio2_pins[] = { 2 }; >> +static const unsigned int gpio3_pins[] = { 3 }; >> +static const unsigned int gpio4_pins[] = { 4 }; >> +static const unsigned int gpio5_pins[] = { 5 }; >> +static const unsigned int gpio6_pins[] = { 6 }; >> +static const unsigned int gpio7_pins[] = { 7 }; >> +static const unsigned int gpio8_pins[] = { 8 }; >> +static const unsigned int gpio9_pins[] = { 9 }; >> +static const unsigned int gpio10_pins[] = { 10 }; >> +static const unsigned int gpio11_pins[] = { 11 }; >> +static const unsigned int gpio12_pins[] = { 12 }; >> +static const unsigned int gpio13_pins[] = { 13 }; > >>> > to here are specific to sm8250, so it should not be in header file to > start with. As these are common to all lpass variants.. I feel it's better to keep in Header file. And if new pins comes in later variants, we can add them incrementally, and they will not impact existing pin numbers. I think in upcoming variants number of pins will not decrease. > > >> + >> +int lpi_pinctrl_probe(struct platform_device *pdev); >> +int lpi_pinctrl_remove(struct platform_device *pdev); >> + >> +#endif /*__PINCTRL_LPASS_LPI_H__*/ >> + >> diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c >> b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c >> new file mode 100644 >> index 0000000..3eba8b3 >> --- /dev/null >> +++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c >> @@ -0,0 +1,125 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* > > ... > >> + >> +static struct platform_driver lpi_pinctrl_driver = { >> + .driver = { >> + .name = "qcom-sm8250-lpass-lpi-pinctrl", >> + .of_match_table = lpi_pinctrl_of_match, >> + }, >> + .probe = lpi_pinctrl_probe, >> + .remove = lpi_pinctrl_remove, >> +}; >> + >> +module_platform_driver(lpi_pinctrl_driver); >> +MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); > > may be : > "SM8250 LPI GPIO pin control driver" Okay.. will change accordingly. > > --srini >> +MODULE_LICENSE("GPL"); >> + >>
On 01/12/2021 14:33, Srinivasa Rao Mandadapu wrote: >> >> >>> +enum lpass_lpi_functions { >>> + LPI_MUX_dmic1_clk, >>> + LPI_MUX_dmic1_data, >>> + LPI_MUX_dmic2_clk, >>> + LPI_MUX_dmic2_data, >>> + LPI_MUX_dmic3_clk, >>> + LPI_MUX_dmic3_data, >>> + LPI_MUX_i2s1_clk, >>> + LPI_MUX_i2s1_data, >>> + LPI_MUX_i2s1_ws, >>> + LPI_MUX_i2s2_clk, >>> + LPI_MUX_i2s2_data, >>> + LPI_MUX_i2s2_ws, >>> + LPI_MUX_qua_mi2s_data, >>> + LPI_MUX_qua_mi2s_sclk, >>> + LPI_MUX_qua_mi2s_ws, >>> + LPI_MUX_swr_rx_clk, >>> + LPI_MUX_swr_rx_data, >>> + LPI_MUX_swr_tx_clk, >>> + LPI_MUX_swr_tx_data, >>> + LPI_MUX_wsa_swr_clk, >>> + LPI_MUX_wsa_swr_data, >>> + LPI_MUX_gpio, >>> + LPI_MUX__, >>> +}; >>> + >>> +static const unsigned int gpio0_pins[] = { 0 }; >>> +static const unsigned int gpio1_pins[] = { 1 }; >>> +static const unsigned int gpio2_pins[] = { 2 }; >>> +static const unsigned int gpio3_pins[] = { 3 }; >>> +static const unsigned int gpio4_pins[] = { 4 }; >>> +static const unsigned int gpio5_pins[] = { 5 }; >>> +static const unsigned int gpio6_pins[] = { 6 }; >>> +static const unsigned int gpio7_pins[] = { 7 }; >>> +static const unsigned int gpio8_pins[] = { 8 }; >>> +static const unsigned int gpio9_pins[] = { 9 }; >>> +static const unsigned int gpio10_pins[] = { 10 }; >>> +static const unsigned int gpio11_pins[] = { 11 }; >>> +static const unsigned int gpio12_pins[] = { 12 }; >>> +static const unsigned int gpio13_pins[] = { 13 }; >> >>> >> to here are specific to sm8250, so it should not be in header file to >> start with. > > As these are common to all lpass variants.. I feel it's better to keep > in Header file. You realize that every include of this file will add these static variables to file, in this case to pinctrl-lpass-lpi.c, pinctrl-sm8250-lpass-lpi.c and pinctrl-sc7280-lpass-lpi.c so in first file(pinctrl-lpass-lpi.c) you never use those variables in second file (pinctrl-sm8250-lpass-lpi.c)you only use up to gpio13 and in third file pinctrl-sc7280-lpass-lpi.c you could use them. so its really bad idea to add static variables in header files. --srini > > And if new pins comes in later variants, we can add them incrementally, > and they will not impact existing pin numbers. > > I think in upcoming variants number of pins will not decrease. >
On 12/1/2021 8:37 PM, Srinivas Kandagatla wrote: Thanks for clarification Srini!! > > On 01/12/2021 14:33, Srinivasa Rao Mandadapu wrote: >>> >>> >>>> +enum lpass_lpi_functions { >>>> + LPI_MUX_dmic1_clk, >>>> + LPI_MUX_dmic1_data, >>>> + LPI_MUX_dmic2_clk, >>>> + LPI_MUX_dmic2_data, >>>> + LPI_MUX_dmic3_clk, >>>> + LPI_MUX_dmic3_data, >>>> + LPI_MUX_i2s1_clk, >>>> + LPI_MUX_i2s1_data, >>>> + LPI_MUX_i2s1_ws, >>>> + LPI_MUX_i2s2_clk, >>>> + LPI_MUX_i2s2_data, >>>> + LPI_MUX_i2s2_ws, >>>> + LPI_MUX_qua_mi2s_data, >>>> + LPI_MUX_qua_mi2s_sclk, >>>> + LPI_MUX_qua_mi2s_ws, >>>> + LPI_MUX_swr_rx_clk, >>>> + LPI_MUX_swr_rx_data, >>>> + LPI_MUX_swr_tx_clk, >>>> + LPI_MUX_swr_tx_data, >>>> + LPI_MUX_wsa_swr_clk, >>>> + LPI_MUX_wsa_swr_data, >>>> + LPI_MUX_gpio, >>>> + LPI_MUX__, >>>> +}; >>>> + >>>> +static const unsigned int gpio0_pins[] = { 0 }; >>>> +static const unsigned int gpio1_pins[] = { 1 }; >>>> +static const unsigned int gpio2_pins[] = { 2 }; >>>> +static const unsigned int gpio3_pins[] = { 3 }; >>>> +static const unsigned int gpio4_pins[] = { 4 }; >>>> +static const unsigned int gpio5_pins[] = { 5 }; >>>> +static const unsigned int gpio6_pins[] = { 6 }; >>>> +static const unsigned int gpio7_pins[] = { 7 }; >>>> +static const unsigned int gpio8_pins[] = { 8 }; >>>> +static const unsigned int gpio9_pins[] = { 9 }; >>>> +static const unsigned int gpio10_pins[] = { 10 }; >>>> +static const unsigned int gpio11_pins[] = { 11 }; >>>> +static const unsigned int gpio12_pins[] = { 12 }; >>>> +static const unsigned int gpio13_pins[] = { 13 }; >>> >>> >>> to here are specific to sm8250, so it should not be in header file >>> to start with. >> >> As these are common to all lpass variants.. I feel it's better to >> keep in Header file. > > You realize that every include of this file will add these static > variables to file, in this case to pinctrl-lpass-lpi.c, > pinctrl-sm8250-lpass-lpi.c and pinctrl-sc7280-lpass-lpi.c > so in first file(pinctrl-lpass-lpi.c) you never use those variables in > second file (pinctrl-sm8250-lpass-lpi.c)you only use up to gpio13 and > in third file pinctrl-sc7280-lpass-lpi.c you could use them. > > so its really bad idea to add static variables in header files. > Okay. Understood. will move it SoC specific files. > --srini > >> >> And if new pins comes in later variants, we can add them >> incrementally, and they will not impact existing pin numbers. >> >> I think in upcoming variants number of pins will not decrease. >>
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 7a12e8c..74568cf 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -37,3 +37,4 @@ obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o +obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 2f19ab4..2641489 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -4,237 +4,16 @@ * Copyright (c) 2020 Linaro Ltd. */ -#include <linux/bitops.h> -#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/gpio/driver.h> -#include <linux/io.h> -#include <linux/module.h> #include <linux/of_device.h> -#include <linux/of.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinmux.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/types.h> #include "../core.h" #include "../pinctrl-utils.h" +#include "pinctrl-lpass-lpi.h" -#define LPI_SLEW_RATE_CTL_REG 0xa000 -#define LPI_TLMM_REG_OFFSET 0x1000 -#define LPI_SLEW_RATE_MAX 0x03 -#define LPI_SLEW_BITS_SIZE 0x02 -#define LPI_SLEW_RATE_MASK GENMASK(1, 0) -#define LPI_GPIO_CFG_REG 0x00 -#define LPI_GPIO_PULL_MASK GENMASK(1, 0) -#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) -#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) -#define LPI_GPIO_OE_MASK BIT(9) -#define LPI_GPIO_VALUE_REG 0x04 -#define LPI_GPIO_VALUE_IN_MASK BIT(0) -#define LPI_GPIO_VALUE_OUT_MASK BIT(1) - -#define LPI_GPIO_BIAS_DISABLE 0x0 -#define LPI_GPIO_PULL_DOWN 0x1 -#define LPI_GPIO_KEEPER 0x2 -#define LPI_GPIO_PULL_UP 0x3 -#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) -#define NO_SLEW -1 - -#define LPI_FUNCTION(fname) \ - [LPI_MUX_##fname] = { \ - .name = #fname, \ - .groups = fname##_groups, \ - .ngroups = ARRAY_SIZE(fname##_groups), \ - } - -#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ - { \ - .name = "gpio" #id, \ - .pins = gpio##id##_pins, \ - .pin = id, \ - .slew_offset = soff, \ - .npins = ARRAY_SIZE(gpio##id##_pins), \ - .funcs = (int[]){ \ - LPI_MUX_gpio, \ - LPI_MUX_##f1, \ - LPI_MUX_##f2, \ - LPI_MUX_##f3, \ - LPI_MUX_##f4, \ - }, \ - .nfuncs = 5, \ - } - -struct lpi_pingroup { - const char *name; - const unsigned int *pins; - unsigned int npins; - unsigned int pin; - /* Bit offset in slew register for SoundWire pins only */ - int slew_offset; - unsigned int *funcs; - unsigned int nfuncs; -}; - -struct lpi_function { - const char *name; - const char * const *groups; - unsigned int ngroups; -}; - -struct lpi_pinctrl_variant_data { - const struct pinctrl_pin_desc *pins; - int npins; - const struct lpi_pingroup *groups; - int ngroups; - const struct lpi_function *functions; - int nfunctions; -}; - -#define MAX_LPI_NUM_CLKS 2 - -struct lpi_pinctrl { - struct device *dev; - struct pinctrl_dev *ctrl; - struct gpio_chip chip; - struct pinctrl_desc desc; - char __iomem *tlmm_base; - char __iomem *slew_base; - struct clk_bulk_data clks[MAX_LPI_NUM_CLKS]; - struct mutex slew_access_lock; - const struct lpi_pinctrl_variant_data *data; -}; - -/* sm8250 variant specific data */ -static const struct pinctrl_pin_desc sm8250_lpi_pins[] = { - PINCTRL_PIN(0, "gpio0"), - PINCTRL_PIN(1, "gpio1"), - PINCTRL_PIN(2, "gpio2"), - PINCTRL_PIN(3, "gpio3"), - PINCTRL_PIN(4, "gpio4"), - PINCTRL_PIN(5, "gpio5"), - PINCTRL_PIN(6, "gpio6"), - PINCTRL_PIN(7, "gpio7"), - PINCTRL_PIN(8, "gpio8"), - PINCTRL_PIN(9, "gpio9"), - PINCTRL_PIN(10, "gpio10"), - PINCTRL_PIN(11, "gpio11"), - PINCTRL_PIN(12, "gpio12"), - PINCTRL_PIN(13, "gpio13"), -}; - -enum sm8250_lpi_functions { - LPI_MUX_dmic1_clk, - LPI_MUX_dmic1_data, - LPI_MUX_dmic2_clk, - LPI_MUX_dmic2_data, - LPI_MUX_dmic3_clk, - LPI_MUX_dmic3_data, - LPI_MUX_i2s1_clk, - LPI_MUX_i2s1_data, - LPI_MUX_i2s1_ws, - LPI_MUX_i2s2_clk, - LPI_MUX_i2s2_data, - LPI_MUX_i2s2_ws, - LPI_MUX_qua_mi2s_data, - LPI_MUX_qua_mi2s_sclk, - LPI_MUX_qua_mi2s_ws, - LPI_MUX_swr_rx_clk, - LPI_MUX_swr_rx_data, - LPI_MUX_swr_tx_clk, - LPI_MUX_swr_tx_data, - LPI_MUX_wsa_swr_clk, - LPI_MUX_wsa_swr_data, - LPI_MUX_gpio, - LPI_MUX__, -}; - -static const unsigned int gpio0_pins[] = { 0 }; -static const unsigned int gpio1_pins[] = { 1 }; -static const unsigned int gpio2_pins[] = { 2 }; -static const unsigned int gpio3_pins[] = { 3 }; -static const unsigned int gpio4_pins[] = { 4 }; -static const unsigned int gpio5_pins[] = { 5 }; -static const unsigned int gpio6_pins[] = { 6 }; -static const unsigned int gpio7_pins[] = { 7 }; -static const unsigned int gpio8_pins[] = { 8 }; -static const unsigned int gpio9_pins[] = { 9 }; -static const unsigned int gpio10_pins[] = { 10 }; -static const unsigned int gpio11_pins[] = { 11 }; -static const unsigned int gpio12_pins[] = { 12 }; -static const unsigned int gpio13_pins[] = { 13 }; -static const char * const swr_tx_clk_groups[] = { "gpio0" }; -static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; -static const char * const swr_rx_clk_groups[] = { "gpio3" }; -static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; -static const char * const dmic1_clk_groups[] = { "gpio6" }; -static const char * const dmic1_data_groups[] = { "gpio7" }; -static const char * const dmic2_clk_groups[] = { "gpio8" }; -static const char * const dmic2_data_groups[] = { "gpio9" }; -static const char * const i2s2_clk_groups[] = { "gpio10" }; -static const char * const i2s2_ws_groups[] = { "gpio11" }; -static const char * const dmic3_clk_groups[] = { "gpio12" }; -static const char * const dmic3_data_groups[] = { "gpio13" }; -static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; -static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; -static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; -static const char * const i2s1_clk_groups[] = { "gpio6" }; -static const char * const i2s1_ws_groups[] = { "gpio7" }; -static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; -static const char * const wsa_swr_clk_groups[] = { "gpio10" }; -static const char * const wsa_swr_data_groups[] = { "gpio11" }; -static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" }; - -static const struct lpi_pingroup sm8250_groups[] = { - LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), - LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), - LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), - LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), - LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), - LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _), - LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _), - LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _), - LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _), - LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _), - LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), - LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), - LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _), - LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _), -}; - -static const struct lpi_function sm8250_functions[] = { - LPI_FUNCTION(dmic1_clk), - LPI_FUNCTION(dmic1_data), - LPI_FUNCTION(dmic2_clk), - LPI_FUNCTION(dmic2_data), - LPI_FUNCTION(dmic3_clk), - LPI_FUNCTION(dmic3_data), - LPI_FUNCTION(i2s1_clk), - LPI_FUNCTION(i2s1_data), - LPI_FUNCTION(i2s1_ws), - LPI_FUNCTION(i2s2_clk), - LPI_FUNCTION(i2s2_data), - LPI_FUNCTION(i2s2_ws), - LPI_FUNCTION(qua_mi2s_data), - LPI_FUNCTION(qua_mi2s_sclk), - LPI_FUNCTION(qua_mi2s_ws), - LPI_FUNCTION(swr_rx_clk), - LPI_FUNCTION(swr_rx_data), - LPI_FUNCTION(swr_tx_clk), - LPI_FUNCTION(swr_tx_data), - LPI_FUNCTION(wsa_swr_clk), - LPI_FUNCTION(wsa_swr_data), -}; - -static struct lpi_pinctrl_variant_data sm8250_lpi_data = { - .pins = sm8250_lpi_pins, - .npins = ARRAY_SIZE(sm8250_lpi_pins), - .groups = sm8250_groups, - .ngroups = ARRAY_SIZE(sm8250_groups), - .functions = sm8250_functions, - .nfunctions = ARRAY_SIZE(sm8250_functions), -}; static int lpi_gpio_read(struct lpi_pinctrl *state, unsigned int pin, unsigned int addr) @@ -582,7 +361,7 @@ static const struct gpio_chip lpi_gpio_template = { .dbg_show = lpi_gpio_dbg_show, }; -static int lpi_pinctrl_probe(struct platform_device *pdev) +int lpi_pinctrl_probe(struct platform_device *pdev) { const struct lpi_pinctrl_variant_data *data; struct device *dev = &pdev->dev; @@ -661,8 +440,10 @@ static int lpi_pinctrl_probe(struct platform_device *pdev) return ret; } +EXPORT_SYMBOL(lpi_pinctrl_probe); + -static int lpi_pinctrl_remove(struct platform_device *pdev) +int lpi_pinctrl_remove(struct platform_device *pdev) { struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev); @@ -671,25 +452,5 @@ static int lpi_pinctrl_remove(struct platform_device *pdev) return 0; } +EXPORT_SYMBOL(lpi_pinctrl_remove); -static const struct of_device_id lpi_pinctrl_of_match[] = { - { - .compatible = "qcom,sm8250-lpass-lpi-pinctrl", - .data = &sm8250_lpi_data, - }, - { } -}; -MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); - -static struct platform_driver lpi_pinctrl_driver = { - .driver = { - .name = "qcom-lpass-lpi-pinctrl", - .of_match_table = lpi_pinctrl_of_match, - }, - .probe = lpi_pinctrl_probe, - .remove = lpi_pinctrl_remove, -}; - -module_platform_driver(lpi_pinctrl_driver); -MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h new file mode 100644 index 0000000..b0afb40 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h @@ -0,0 +1,139 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020 Linaro Ltd. + */ +#ifndef __PINCTRL_LPASS_LPI_H__ +#define __PINCTRL_LPASS_LPI_H__ + +#define LPI_SLEW_RATE_CTL_REG 0xa000 +#define LPI_TLMM_REG_OFFSET 0x1000 +#define LPI_SLEW_RATE_MAX 0x03 +#define LPI_SLEW_BITS_SIZE 0x02 +#define LPI_SLEW_RATE_MASK GENMASK(1, 0) +#define LPI_GPIO_CFG_REG 0x00 +#define LPI_GPIO_PULL_MASK GENMASK(1, 0) +#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) +#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) +#define LPI_GPIO_OE_MASK BIT(9) +#define LPI_GPIO_VALUE_REG 0x04 +#define LPI_GPIO_VALUE_IN_MASK BIT(0) +#define LPI_GPIO_VALUE_OUT_MASK BIT(1) + +#define LPI_GPIO_BIAS_DISABLE 0x0 +#define LPI_GPIO_PULL_DOWN 0x1 +#define LPI_GPIO_KEEPER 0x2 +#define LPI_GPIO_PULL_UP 0x3 +#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) +#define NO_SLEW -1 + +#define LPI_FUNCTION(fname) \ + [LPI_MUX_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .pin = id, \ + .slew_offset = soff, \ + .npins = ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + LPI_MUX_gpio, \ + LPI_MUX_##f1, \ + LPI_MUX_##f2, \ + LPI_MUX_##f3, \ + LPI_MUX_##f4, \ + }, \ + .nfuncs = 5, \ + } + +struct lpi_pingroup { + const char *name; + const unsigned int *pins; + unsigned int npins; + unsigned int pin; + /* Bit offset in slew register for SoundWire pins only */ + int slew_offset; + unsigned int *funcs; + unsigned int nfuncs; +}; + +struct lpi_function { + const char *name; + const char * const *groups; + unsigned int ngroups; +}; + +struct lpi_pinctrl_variant_data { + const struct pinctrl_pin_desc *pins; + int npins; + const struct lpi_pingroup *groups; + int ngroups; + const struct lpi_function *functions; + int nfunctions; +}; + +#define MAX_LPI_NUM_CLKS 2 + +struct lpi_pinctrl { + struct device *dev; + struct pinctrl_dev *ctrl; + struct gpio_chip chip; + struct pinctrl_desc desc; + char __iomem *tlmm_base; + char __iomem *slew_base; + struct clk_bulk_data clks[MAX_LPI_NUM_CLKS]; + struct mutex slew_access_lock; + const struct lpi_pinctrl_variant_data *data; +}; + +enum lpass_lpi_functions { + LPI_MUX_dmic1_clk, + LPI_MUX_dmic1_data, + LPI_MUX_dmic2_clk, + LPI_MUX_dmic2_data, + LPI_MUX_dmic3_clk, + LPI_MUX_dmic3_data, + LPI_MUX_i2s1_clk, + LPI_MUX_i2s1_data, + LPI_MUX_i2s1_ws, + LPI_MUX_i2s2_clk, + LPI_MUX_i2s2_data, + LPI_MUX_i2s2_ws, + LPI_MUX_qua_mi2s_data, + LPI_MUX_qua_mi2s_sclk, + LPI_MUX_qua_mi2s_ws, + LPI_MUX_swr_rx_clk, + LPI_MUX_swr_rx_data, + LPI_MUX_swr_tx_clk, + LPI_MUX_swr_tx_data, + LPI_MUX_wsa_swr_clk, + LPI_MUX_wsa_swr_data, + LPI_MUX_gpio, + LPI_MUX__, +}; + +static const unsigned int gpio0_pins[] = { 0 }; +static const unsigned int gpio1_pins[] = { 1 }; +static const unsigned int gpio2_pins[] = { 2 }; +static const unsigned int gpio3_pins[] = { 3 }; +static const unsigned int gpio4_pins[] = { 4 }; +static const unsigned int gpio5_pins[] = { 5 }; +static const unsigned int gpio6_pins[] = { 6 }; +static const unsigned int gpio7_pins[] = { 7 }; +static const unsigned int gpio8_pins[] = { 8 }; +static const unsigned int gpio9_pins[] = { 9 }; +static const unsigned int gpio10_pins[] = { 10 }; +static const unsigned int gpio11_pins[] = { 11 }; +static const unsigned int gpio12_pins[] = { 12 }; +static const unsigned int gpio13_pins[] = { 13 }; + +int lpi_pinctrl_probe(struct platform_device *pdev); +int lpi_pinctrl_remove(struct platform_device *pdev); + +#endif /*__PINCTRL_LPASS_LPI_H__*/ + diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c new file mode 100644 index 0000000..3eba8b3 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020 Linaro Ltd. + */ + +#include <linux/clk.h> +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "pinctrl-lpass-lpi.h" + +/* sm8250 variant specific data */ +static const struct pinctrl_pin_desc sm8250_lpi_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), +}; + +static const char * const swr_tx_clk_groups[] = { "gpio0" }; +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; +static const char * const swr_rx_clk_groups[] = { "gpio3" }; +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; +static const char * const dmic1_clk_groups[] = { "gpio6" }; +static const char * const dmic1_data_groups[] = { "gpio7" }; +static const char * const dmic2_clk_groups[] = { "gpio8" }; +static const char * const dmic2_data_groups[] = { "gpio9" }; +static const char * const i2s2_clk_groups[] = { "gpio10" }; +static const char * const i2s2_ws_groups[] = { "gpio11" }; +static const char * const dmic3_clk_groups[] = { "gpio12" }; +static const char * const dmic3_data_groups[] = { "gpio13" }; +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; +static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; +static const char * const i2s1_clk_groups[] = { "gpio6" }; +static const char * const i2s1_ws_groups[] = { "gpio7" }; +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; +static const char * const wsa_swr_clk_groups[] = { "gpio10" }; +static const char * const wsa_swr_data_groups[] = { "gpio11" }; +static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" }; + +static const struct lpi_pingroup sm8250_groups[] = { + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _), + LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _), + LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _), + LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _), + LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _), + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), + LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _), + LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _), +}; + +static const struct lpi_function sm8250_functions[] = { + LPI_FUNCTION(dmic1_clk), + LPI_FUNCTION(dmic1_data), + LPI_FUNCTION(dmic2_clk), + LPI_FUNCTION(dmic2_data), + LPI_FUNCTION(dmic3_clk), + LPI_FUNCTION(dmic3_data), + LPI_FUNCTION(i2s1_clk), + LPI_FUNCTION(i2s1_data), + LPI_FUNCTION(i2s1_ws), + LPI_FUNCTION(i2s2_clk), + LPI_FUNCTION(i2s2_data), + LPI_FUNCTION(i2s2_ws), + LPI_FUNCTION(qua_mi2s_data), + LPI_FUNCTION(qua_mi2s_sclk), + LPI_FUNCTION(qua_mi2s_ws), + LPI_FUNCTION(swr_rx_clk), + LPI_FUNCTION(swr_rx_data), + LPI_FUNCTION(swr_tx_clk), + LPI_FUNCTION(swr_tx_data), + LPI_FUNCTION(wsa_swr_clk), + LPI_FUNCTION(wsa_swr_data), +}; + +static struct lpi_pinctrl_variant_data sm8250_lpi_data = { + .pins = sm8250_lpi_pins, + .npins = ARRAY_SIZE(sm8250_lpi_pins), + .groups = sm8250_groups, + .ngroups = ARRAY_SIZE(sm8250_groups), + .functions = sm8250_functions, + .nfunctions = ARRAY_SIZE(sm8250_functions), +}; + +static const struct of_device_id lpi_pinctrl_of_match[] = { + { + .compatible = "qcom,sm8250-lpass-lpi-pinctrl", + .data = &sm8250_lpi_data, + }, + { } +}; +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); + +static struct platform_driver lpi_pinctrl_driver = { + .driver = { + .name = "qcom-sm8250-lpass-lpi-pinctrl", + .of_match_table = lpi_pinctrl_of_match, + }, + .probe = lpi_pinctrl_probe, + .remove = lpi_pinctrl_remove, +}; + +module_platform_driver(lpi_pinctrl_driver); +MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); +MODULE_LICENSE("GPL"); +