| Message ID | 1637580369-876-1-git-send-email-quic_sbillaka@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4,1/4] arm64: dts: qcom: sc7280: add display dt nodes | expand |
On Mon 22 Nov 05:26 CST 2021, Sankeerth Billakanti wrote: > From: Krishna Manikandan <quic_mkrishn@quicinc.com> > > Add mdss and mdp DT nodes for sc7280. > > Signed-off-by: Krishna Manikandan <quic_mkrishn@quicinc.com> > Reported-by: kernel test robot <lkp@intel.com> > Reviewed-by: Stephen Boyd <swboyd@chromium.org> > Reported-by: kernel test robot <lkp@intel.com> > Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> > --- > > Changes in v4: > None > > Changes in v3: > None > > Changes in v2: > - Rename display dt nodes (Stephen Boyd) > - Add clock names one per line for readability (Stephen Boyd) > > > arch/arm64/boot/dts/qcom/sc7280.dtsi | 90 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 90 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > index 365a2e0..a4536b6 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > @@ -2704,6 +2704,96 @@ > #power-domain-cells = <1>; > }; > > + mdss: display-subsystem@ae00000 { > + compatible = "qcom,sc7280-mdss"; > + reg = <0 0x0ae00000 0 0x1000>; > + reg-names = "mdss"; > + > + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; > + > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", > + "ahb", > + "core"; > + > + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; > + assigned-clock-rates = <300000000>; > + > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>; > + interconnect-names = "mdp0-mem"; > + > + iommus = <&apps_smmu 0x900 0x402>; > + > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + status = "disabled"; > + > + mdp: display-controller@ae01000 { I believe the only reason to give this a label is so that you can enable it in the dts. But I don't see the point of having it status disabled, given that it should always follow the mdss node's status. > + compatible = "qcom,sc7280-dpu"; > + reg = <0 0x0ae01000 0 0x8f030>, > + <0 0x0aeb0000 0 0x2008>; > + reg-names = "mdp", "vbif"; > + > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > + <&gcc GCC_DISP_SF_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "bus", > + "nrt_bus", > + "iface", > + "lut", > + "core", > + "vsync"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>; > + assigned-clock-rates = <300000000>, > + <19200000>, > + <19200000>; > + operating-points-v2 = <&mdp_opp_table>; > + power-domains = <&rpmhpd SC7280_CX>; > + > + interrupt-parent = <&mdss>; > + interrupts = <0>; > + > + status = "disabled"; So my suggestion is to drop this and drop the label. If not, please change the label of this node to mdss_mdp, for sorting purposes. Thanks, Bjorn > + > + mdp_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-200000000 { > + opp-hz = /bits/ 64 <200000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-300000000 { > + opp-hz = /bits/ 64 <300000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-380000000 { > + opp-hz = /bits/ 64 <380000000>; > + required-opps = <&rpmhpd_opp_svs_l1>; > + }; > + > + opp-506666667 { > + opp-hz = /bits/ 64 <506666667>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + }; > + }; > + }; > + > pdc: interrupt-controller@b220000 { > compatible = "qcom,sc7280-pdc", "qcom,pdc"; > reg = <0 0x0b220000 0 0x30000>; > -- > 2.7.4 >
On Mon 22 Nov 05:26 CST 2021, Sankeerth Billakanti wrote: > From: Krishna Manikandan <quic_mkrishn@quicinc.com> > > Add mdss and mdp DT nodes for sc7280. > > Signed-off-by: Krishna Manikandan <quic_mkrishn@quicinc.com> > Reported-by: kernel test robot <lkp@intel.com> Sorry, missed this one before sending my reply. "kernel test robot" did not report the lack of mdss nodes in your dts. So please drop this as well. > Reviewed-by: Stephen Boyd <swboyd@chromium.org> > Reported-by: kernel test robot <lkp@intel.com> And again. Thanks, Bjorn > Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> > --- > > Changes in v4: > None > > Changes in v3: > None > > Changes in v2: > - Rename display dt nodes (Stephen Boyd) > - Add clock names one per line for readability (Stephen Boyd) > > > arch/arm64/boot/dts/qcom/sc7280.dtsi | 90 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 90 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > index 365a2e0..a4536b6 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > @@ -2704,6 +2704,96 @@ > #power-domain-cells = <1>; > }; > > + mdss: display-subsystem@ae00000 { > + compatible = "qcom,sc7280-mdss"; > + reg = <0 0x0ae00000 0 0x1000>; > + reg-names = "mdss"; > + > + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; > + > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", > + "ahb", > + "core"; > + > + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; > + assigned-clock-rates = <300000000>; > + > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>; > + interconnect-names = "mdp0-mem"; > + > + iommus = <&apps_smmu 0x900 0x402>; > + > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + status = "disabled"; > + > + mdp: display-controller@ae01000 { > + compatible = "qcom,sc7280-dpu"; > + reg = <0 0x0ae01000 0 0x8f030>, > + <0 0x0aeb0000 0 0x2008>; > + reg-names = "mdp", "vbif"; > + > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > + <&gcc GCC_DISP_SF_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "bus", > + "nrt_bus", > + "iface", > + "lut", > + "core", > + "vsync"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>; > + assigned-clock-rates = <300000000>, > + <19200000>, > + <19200000>; > + operating-points-v2 = <&mdp_opp_table>; > + power-domains = <&rpmhpd SC7280_CX>; > + > + interrupt-parent = <&mdss>; > + interrupts = <0>; > + > + status = "disabled"; > + > + mdp_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-200000000 { > + opp-hz = /bits/ 64 <200000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-300000000 { > + opp-hz = /bits/ 64 <300000000>; > + required-opps = <&rpmhpd_opp_svs>; > + }; > + > + opp-380000000 { > + opp-hz = /bits/ 64 <380000000>; > + required-opps = <&rpmhpd_opp_svs_l1>; > + }; > + > + opp-506666667 { > + opp-hz = /bits/ 64 <506666667>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + }; > + }; > + }; > + > pdc: interrupt-controller@b220000 { > compatible = "qcom,sc7280-pdc", "qcom,pdc"; > reg = <0 0x0b220000 0 0x30000>; > -- > 2.7.4 >
On Mon, 22 Nov 2021 16:56:06 +0530, Sankeerth Billakanti wrote: > From: Krishna Manikandan <quic_mkrishn@quicinc.com> > > Add mdss and mdp DT nodes for sc7280. > > Applied, thanks! [1/4] arm64: dts: qcom: sc7280: add display dt nodes commit: fcb68dfda5cbd816d27ac50c287833848874f61c [2/4] arm64: dts: qcom: sc7280: Add DSI display nodes commit: 43137272f0bc5e05e4c4c6f7bfce017bfb9e16b5 [3/4] arm64: dts: qcom: sc7280: add edp display dt nodes commit: 25940788d170251373d8975d359706350818fa0f Best regards,
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 365a2e0..a4536b6 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2704,6 +2704,96 @@ #power-domain-cells = <1>; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,sc7280-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; + assigned-clock-rates = <300000000>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x900 0x402>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdp: display-controller@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0 0x0ae01000 0 0x8f030>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + assigned-clock-rates = <300000000>, + <19200000>, + <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + status = "disabled"; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-380000000 { + opp-hz = /bits/ 64 <380000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-506666667 { + opp-hz = /bits/ 64 <506666667>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sc7280-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>;