diff mbox series

[5/6] i2c: exynos5: Add bus clock support

Message ID 20211201190455.31646-6-semen.protsenko@linaro.org (mailing list archive)
State Superseded
Headers show
Series i2c: exynos5: Add support for modern Exynos SoCs | expand

Commit Message

Sam Protsenko Dec. 1, 2021, 7:04 p.m. UTC 
In new Exynos SoCs (like Exynos850) where HSI2C is implemented as a
part of USIv2 block, there are two clocks provided to HSI2C controller:
  - PCLK: bus clock (APB), provides access to register interface
  - IPCLK: operating IP-core clock; SCL is derived from this one

Both clocks have to be asserted for HSI2C to be functional in that case.

Add code to obtain and enable/disable PCLK in addition to already
handled operating clock. Make it optional though, as older Exynos SoC
variants only have one HSI2C clock.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
 drivers/i2c/busses/i2c-exynos5.c | 46 ++++++++++++++++++++++++++------
 1 file changed, 38 insertions(+), 8 deletions(-)

Comments

Krzysztof Kozlowski Dec. 2, 2021, 8:28 a.m. UTC | #1 
On 01/12/2021 20:04, Sam Protsenko wrote:
> In new Exynos SoCs (like Exynos850) where HSI2C is implemented as a
> part of USIv2 block, there are two clocks provided to HSI2C controller:
>   - PCLK: bus clock (APB), provides access to register interface
>   - IPCLK: operating IP-core clock; SCL is derived from this one
> 
> Both clocks have to be asserted for HSI2C to be functional in that case.
> 
> Add code to obtain and enable/disable PCLK in addition to already
> handled operating clock. Make it optional though, as older Exynos SoC
> variants only have one HSI2C clock.
> 
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> ---
>  drivers/i2c/busses/i2c-exynos5.c | 46 ++++++++++++++++++++++++++------
>  1 file changed, 38 insertions(+), 8 deletions(-)
> 

You could use clk_bulk API, but for two clocks, where one is optional,
it won't reduce much of code, so I am fine here:


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>


Best regards,
Krzysztof
Chanho Park Dec. 2, 2021, 10:30 a.m. UTC | #2 
> In new Exynos SoCs (like Exynos850) where HSI2C is implemented as a part
> of USIv2 block, there are two clocks provided to HSI2C controller:
>   - PCLK: bus clock (APB), provides access to register interface
>   - IPCLK: operating IP-core clock; SCL is derived from this one
> 
> Both clocks have to be asserted for HSI2C to be functional in that case.
> 
> Add code to obtain and enable/disable PCLK in addition to already handled
> operating clock. Make it optional though, as older Exynos SoC variants
> only have one HSI2C clock.
> 
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

Reviewed-by: Chanho Park <chanho61.park@samsung.com>

Best Regards,
Chanho Park
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 5198e71e8dab..9cde5ecb9449 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -182,7 +182,8 @@  struct exynos5_i2c {
 	unsigned int		irq;
 
 	void __iomem		*regs;
-	struct clk		*clk;
+	struct clk		*clk;		/* operating clock */
+	struct clk		*pclk;		/* bus clock */
 	struct device		*dev;
 	int			state;
 
@@ -757,10 +758,14 @@  static int exynos5_i2c_xfer(struct i2c_adapter *adap,
 	struct exynos5_i2c *i2c = adap->algo_data;
 	int i, ret;
 
-	ret = clk_enable(i2c->clk);
+	ret = clk_enable(i2c->pclk);
 	if (ret)
 		return ret;
 
+	ret = clk_enable(i2c->clk);
+	if (ret)
+		goto err_pclk;
+
 	for (i = 0; i < num; ++i) {
 		ret = exynos5_i2c_xfer_msg(i2c, msgs + i, i + 1 == num);
 		if (ret)
@@ -768,6 +773,8 @@  static int exynos5_i2c_xfer(struct i2c_adapter *adap,
 	}
 
 	clk_disable(i2c->clk);
+err_pclk:
+	clk_disable(i2c->pclk);
 
 	return ret ?: num;
 }
@@ -807,10 +814,18 @@  static int exynos5_i2c_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	ret = clk_prepare_enable(i2c->clk);
+	i2c->pclk = devm_clk_get(&pdev->dev, "hsi2c_pclk");
+	if (IS_ERR(i2c->pclk))
+		i2c->pclk = NULL; /* pclk is optional */
+
+	ret = clk_prepare_enable(i2c->pclk);
 	if (ret)
 		return ret;
 
+	ret = clk_prepare_enable(i2c->clk);
+	if (ret)
+		goto err_pclk;
+
 	i2c->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->regs)) {
 		ret = PTR_ERR(i2c->regs);
@@ -853,6 +868,7 @@  static int exynos5_i2c_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, i2c);
 
 	clk_disable(i2c->clk);
+	clk_disable(i2c->pclk);
 
 	dev_info(&pdev->dev, "%s: HSI2C adapter\n", dev_name(&i2c->adap.dev));
 
@@ -860,6 +876,9 @@  static int exynos5_i2c_probe(struct platform_device *pdev)
 
  err_clk:
 	clk_disable_unprepare(i2c->clk);
+
+ err_pclk:
+	clk_disable_unprepare(i2c->pclk);
 	return ret;
 }
 
@@ -870,6 +889,7 @@  static int exynos5_i2c_remove(struct platform_device *pdev)
 	i2c_del_adapter(&i2c->adap);
 
 	clk_unprepare(i2c->clk);
+	clk_unprepare(i2c->pclk);
 
 	return 0;
 }
@@ -881,6 +901,7 @@  static int exynos5_i2c_suspend_noirq(struct device *dev)
 
 	i2c_mark_adapter_suspended(&i2c->adap);
 	clk_unprepare(i2c->clk);
+	clk_unprepare(i2c->pclk);
 
 	return 0;
 }
@@ -890,21 +911,30 @@  static int exynos5_i2c_resume_noirq(struct device *dev)
 	struct exynos5_i2c *i2c = dev_get_drvdata(dev);
 	int ret = 0;
 
-	ret = clk_prepare_enable(i2c->clk);
+	ret = clk_prepare_enable(i2c->pclk);
 	if (ret)
 		return ret;
 
+	ret = clk_prepare_enable(i2c->clk);
+	if (ret)
+		goto err_pclk;
+
 	ret = exynos5_hsi2c_clock_setup(i2c);
-	if (ret) {
-		clk_disable_unprepare(i2c->clk);
-		return ret;
-	}
+	if (ret)
+		goto err_clk;
 
 	exynos5_i2c_init(i2c);
 	clk_disable(i2c->clk);
+	clk_disable(i2c->pclk);
 	i2c_mark_adapter_resumed(&i2c->adap);
 
 	return 0;
+
+err_clk:
+	clk_disable_unprepare(i2c->clk);
+err_pclk:
+	clk_disable_unprepare(i2c->pclk);
+	return ret;
 }
 #endif