| Message ID | 20211125144834.52457-1-tony@atomide.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: Fix timer regression for beagleboard revision c | expand |
On 25.11.2021 16.48, Tony Lindgren wrote: > Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3") > caused a timer regression for beagleboard revision c where the system > clockevent stops working if omap3isp module is unloaded. > > Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks > applied that limit the usable timers for no good reason. This also affects > the power management as we use the system clock instead of the 32k clock > source. > > Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer > quirks. This allows us to remove the timer quirks for later beagleboard > revisions. We also need to update the related timer quirk check for the > correct compatible property. > > Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3") > Cc: linux-kernel@vger.kernel.org > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: Thomas Gleixner <tglx@linutronix.de> > Cc: Rob Herring <robh+dt@kernel.org> > Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com> > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- > .../devicetree/bindings/arm/omap/omap.txt | 3 ++ > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/omap3-beagle-ab4.dts | 47 +++++++++++++++++++ > arch/arm/boot/dts/omap3-beagle.dts | 33 ------------- > drivers/clocksource/timer-ti-dm-systimer.c | 2 +- > 5 files changed, 52 insertions(+), 34 deletions(-) > create mode 100644 arch/arm/boot/dts/omap3-beagle-ab4.dts > I trust Tony got this working since I lent the board for him to look at this regression since our earlier remote attempts didn't find a working fix. Jarkko
Hi Tony, On 25/11/2021 15:48, Tony Lindgren wrote: > Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3") > caused a timer regression for beagleboard revision c where the system > clockevent stops working if omap3isp module is unloaded. > > Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks > applied that limit the usable timers for no good reason. This also affects > the power management as we use the system clock instead of the 32k clock > source. > > Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer > quirks. This allows us to remove the timer quirks for later beagleboard > revisions. We also need to update the related timer quirk check for the > correct compatible property. > > Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3") > Cc: linux-kernel@vger.kernel.org > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: Thomas Gleixner <tglx@linutronix.de> > Cc: Rob Herring <robh+dt@kernel.org> > Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com> > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- > .../devicetree/bindings/arm/omap/omap.txt | 3 ++ > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/omap3-beagle-ab4.dts | 47 +++++++++++++++++++ > arch/arm/boot/dts/omap3-beagle.dts | 33 ------------- > drivers/clocksource/timer-ti-dm-systimer.c | 2 +- > 5 files changed, 52 insertions(+), 34 deletions(-) > create mode 100644 arch/arm/boot/dts/omap3-beagle-ab4.dts Usually, bindings DT and driver changes are separate patches > diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt > --- a/Documentation/devicetree/bindings/arm/omap/omap.txt > +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt > @@ -119,6 +119,9 @@ Boards (incomplete list of examples): > - OMAP3 BeagleBoard : Low cost community board > compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3" > > +- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk > + compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3" > + > - OMAP3 Tobi with Overo : Commercial expansion board with daughter board > compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3" > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -794,6 +794,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ > logicpd-som-lv-37xx-devkit.dtb \ > omap3430-sdp.dtb \ > omap3-beagle.dtb \ > + omap3-beagle-ab4.dtb \ > omap3-beagle-xm.dtb \ > omap3-beagle-xm-ab.dtb \ > omap3-cm-t3517.dtb \ > diff --git a/arch/arm/boot/dts/omap3-beagle-ab4.dts b/arch/arm/boot/dts/omap3-beagle-ab4.dts > new file mode 100644 > --- /dev/null > +++ b/arch/arm/boot/dts/omap3-beagle-ab4.dts > @@ -0,0 +1,47 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/dts-v1/; > + > +#include "omap3-beagle.dts" > + > +/ { > + model = "TI OMAP3 BeagleBoard A to B4"; > + compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"; > +}; > + > +/* > + * Workaround for capacitor C70 issue, see "Boards revision A and < B5" > + * section at https://elinux.org/BeagleBoard_Community > + */ > + > +/* Unusable as clocksource because of unreliable oscillator */ > +&counter32k { > + status = "disabled"; > +}; > + > +/* Unusable as clockevent because of unreliable oscillator, allow to idle */ > +&timer1_target { > + /delete-property/ti,no-reset-on-init; > + /delete-property/ti,no-idle; > + timer@0 { > + /delete-property/ti,timer-alwon; > + }; > +}; > + > +/* Preferred always-on timer for clocksource */ > +&timer12_target { > + ti,no-reset-on-init; > + ti,no-idle; > + timer@0 { > + /* Always clocked by secure_32k_fck */ > + }; > +}; > + > +/* Preferred timer for clockevent */ > +&timer2_target { > + ti,no-reset-on-init; > + ti,no-idle; > + timer@0 { > + assigned-clocks = <&gpt2_fck>; > + assigned-clock-parents = <&sys_ck>; > + }; > +}; > diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts > --- a/arch/arm/boot/dts/omap3-beagle.dts > +++ b/arch/arm/boot/dts/omap3-beagle.dts > @@ -308,39 +308,6 @@ &usbhsehci { > phys = <0 &hsusb2_phy>; > }; > > -/* Unusable as clocksource because of unreliable oscillator */ > -&counter32k { > - status = "disabled"; > -}; > - > -/* Unusable as clockevent because if unreliable oscillator, allow to idle */ > -&timer1_target { > - /delete-property/ti,no-reset-on-init; > - /delete-property/ti,no-idle; > - timer@0 { > - /delete-property/ti,timer-alwon; > - }; > -}; > - > -/* Preferred always-on timer for clocksource */ > -&timer12_target { > - ti,no-reset-on-init; > - ti,no-idle; > - timer@0 { > - /* Always clocked by secure_32k_fck */ > - }; > -}; > - > -/* Preferred timer for clockevent */ > -&timer2_target { > - ti,no-reset-on-init; > - ti,no-idle; > - timer@0 { > - assigned-clocks = <&gpt2_fck>; > - assigned-clock-parents = <&sys_ck>; > - }; > -}; > - > &twl_gpio { > ti,use-leds; > /* pullups: BIT(1) */ > diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c > --- a/drivers/clocksource/timer-ti-dm-systimer.c > +++ b/drivers/clocksource/timer-ti-dm-systimer.c > @@ -241,7 +241,7 @@ static void __init dmtimer_systimer_assign_alwon(void) > bool quirk_unreliable_oscillator = false; > > /* Quirk unreliable 32 KiHz oscillator with incomplete dts */ > - if (of_machine_is_compatible("ti,omap3-beagle") || > + if (of_machine_is_compatible("ti,omap3-beagle-ab4") || > of_machine_is_compatible("timll,omap3-devkit8000")) { > quirk_unreliable_oscillator = true; > counter_32k = -ENODEV; >
Hi, * Daniel Lezcano <daniel.lezcano@linaro.org> [211129 09:57]: > On 25/11/2021 15:48, Tony Lindgren wrote: > > .../devicetree/bindings/arm/omap/omap.txt | 3 ++ > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/omap3-beagle-ab4.dts | 47 +++++++++++++++++++ > > arch/arm/boot/dts/omap3-beagle.dts | 33 ------------- > > drivers/clocksource/timer-ti-dm-systimer.c | 2 +- > > 5 files changed, 52 insertions(+), 34 deletions(-) > > create mode 100644 arch/arm/boot/dts/omap3-beagle-ab4.dts > > Usually, bindings DT and driver changes are separate patches Not always for fixes :) In this case we need to patch both the dts for timer quirks, and also update the related driver quirk. The driver quirk I originally added to deal with possble older dtb files complicating the fix unncessarily.. If you have better ideas for a fix please let me know. Regards, Tony
Hi Tony On 11/25/21 16:48, Tony Lindgren wrote: > Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3") > caused a timer regression for beagleboard revision c where the system > clockevent stops working if omap3isp module is unloaded. > > Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks > applied that limit the usable timers for no good reason. This also affects > the power management as we use the system clock instead of the 32k clock > source. > > Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer > quirks. This allows us to remove the timer quirks for later beagleboard > revisions. We also need to update the related timer quirk check for the > correct compatible property. > > Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3") > Cc: linux-kernel@vger.kernel.org > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: Thomas Gleixner <tglx@linutronix.de> > Cc: Rob Herring <robh+dt@kernel.org> > Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com> > Signed-off-by: Tony Lindgren <tony@atomide.com> > --- > .../devicetree/bindings/arm/omap/omap.txt | 3 ++ > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/omap3-beagle-ab4.dts | 47 +++++++++++++++++++ > arch/arm/boot/dts/omap3-beagle.dts | 33 ------------- > drivers/clocksource/timer-ti-dm-systimer.c | 2 +- > 5 files changed, 52 insertions(+), 34 deletions(-) > create mode 100644 arch/arm/boot/dts/omap3-beagle-ab4.dts > I must have some error in my methodology since I cannot see the issue being fixed with your patch :-( Testing at commit 6f513529296f ("Merge tag 'for-5.16-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux") alias ma='nice make -j `getconf _NPROCESSORS_ONLN` ARCH=arm CROSS_COMPILE="ccache arm-linux-gnueabihf-"' make ARCH=arm omap2plus_defconfig ma cat arch/arm/boot/dts/omap3-beagle.dtb >>arch/arm/boot/zImage ma LOADADDR=0x80008000 uImage -> copy uImage & modules, boot # rmmod omap3_isp # sleep 1 -> This is the regression. Sleep is blocked until I hit keys over serial console rm vmlinux arch/arm/boot/zImage patch -p1 </tmp/your-mail.eml ma cat arch/arm/boot/dts/omap3-beagle-ab4.dtb >>arch/arm/boot/zImage ma LOADADDR=0x80008000 uImage -> copy uImage & modules to µSD, boot # rmmod omap3_isp # sleep 1 -> is still blocked until I hit keys over serial console When I compare the dmesg this is the only difference (along with "linux version" line) before user space starts. I.e. timer configuration is the same in both. [ 0.000000] OF: fdt: Machine model: TI OMAP3 BeagleBoard -> [ 0.000000] OF: fdt: Machine model: TI OMAP3 BeagleBoard A to B4 Jarkko
On Sat, Dec 11, 2021 at 05:30:57PM +0200, Jarkko Nikula wrote: > Hi Tony > > On 11/25/21 16:48, Tony Lindgren wrote: > > Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3") > > caused a timer regression for beagleboard revision c where the system > > clockevent stops working if omap3isp module is unloaded. > > > > Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks > > applied that limit the usable timers for no good reason. This also affects > > the power management as we use the system clock instead of the 32k clock > > source. > > > > Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer > > quirks. This allows us to remove the timer quirks for later beagleboard > > revisions. We also need to update the related timer quirk check for the > > correct compatible property. > > > > Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3") > > Cc: linux-kernel@vger.kernel.org > > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > > Cc: Thomas Gleixner <tglx@linutronix.de> > > Cc: Rob Herring <robh+dt@kernel.org> > > Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com> > > Signed-off-by: Tony Lindgren <tony@atomide.com> > > --- > > > .../devicetree/bindings/arm/omap/omap.txt | 3 ++ > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/omap3-beagle-ab4.dts | 47 +++++++++++++++++++ > > arch/arm/boot/dts/omap3-beagle.dts | 33 ------------- > > drivers/clocksource/timer-ti-dm-systimer.c | 2 +- > > 5 files changed, 52 insertions(+), 34 deletions(-) > > create mode 100644 arch/arm/boot/dts/omap3-beagle-ab4.dts > > > I must have some error in my methodology since I cannot see the issue > being fixed with your patch :-( > Facepalm, as I was expecting I had error in my methodology... see below > cat arch/arm/boot/dts/omap3-beagle.dtb >>arch/arm/boot/zImage This I used years before your patch and by some reason I confused to use new omap3-beagle-ab4.dtb when testing your patch yesterday: > cat arch/arm/boot/dts/omap3-beagle-ab4.dtb >>arch/arm/boot/zImage without realizing my Beagle Board version is not between A to B4 but C2. So when using the omap3-beagle.dtb your patch fixes the regression I found. Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
* Jarkko Nikula <jarkko.nikula@bitmer.com> [211212 19:05]: > On Sat, Dec 11, 2021 at 05:30:57PM +0200, Jarkko Nikula wrote: > This I used years before your patch and by some reason I confused to use > new omap3-beagle-ab4.dtb when testing your patch yesterday: > > > cat arch/arm/boot/dts/omap3-beagle-ab4.dtb >>arch/arm/boot/zImage > > without realizing my Beagle Board version is not between A to B4 but C2. > So when using the omap3-beagle.dtb your patch fixes the regression I > found. > > Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com> OK good to hear omap3-beagle.dtb now works for beagles that don't have the A to B4 hardware timer issue :) And thanks for testing. It seems the beagle revisions A to B4 are broken for any kind of power management as the clockevent timer for those boards is not always on. Probably not worth spending much effort on those. Maybe the PMIC could be reconfigured on the buggy revisions in addition to the timer quirks if somebody still cares for those board revisions. Regards, Tony
* Tony Lindgren <tony@atomide.com> [211213 05:44]: > * Jarkko Nikula <jarkko.nikula@bitmer.com> [211212 19:05]: > > On Sat, Dec 11, 2021 at 05:30:57PM +0200, Jarkko Nikula wrote: > > This I used years before your patch and by some reason I confused to use > > new omap3-beagle-ab4.dtb when testing your patch yesterday: > > > > > cat arch/arm/boot/dts/omap3-beagle-ab4.dtb >>arch/arm/boot/zImage > > > > without realizing my Beagle Board version is not between A to B4 but C2. > > So when using the omap3-beagle.dtb your patch fixes the regression I > > found. > > > > Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com> > > OK good to hear omap3-beagle.dtb now works for beagles that don't have > the A to B4 hardware timer issue :) And thanks for testing. > > It seems the beagle revisions A to B4 are broken for any kind of power > management as the clockevent timer for those boards is not always on. > Probably not worth spending much effort on those. Maybe the PMIC could > be reconfigured on the buggy revisions in addition to the timer quirks > if somebody still cares for those board revisions. Anyways, applying this fix into omap-for-v5.17/fixes-not-urgent. Regards, Tony
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -119,6 +119,9 @@ Boards (incomplete list of examples): - OMAP3 BeagleBoard : Low cost community board compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3" +- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk + compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3" + - OMAP3 Tobi with Overo : Commercial expansion board with daughter board compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -794,6 +794,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ logicpd-som-lv-37xx-devkit.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ + omap3-beagle-ab4.dtb \ omap3-beagle-xm.dtb \ omap3-beagle-xm-ab.dtb \ omap3-cm-t3517.dtb \ diff --git a/arch/arm/boot/dts/omap3-beagle-ab4.dts b/arch/arm/boot/dts/omap3-beagle-ab4.dts new file mode 100644 --- /dev/null +++ b/arch/arm/boot/dts/omap3-beagle-ab4.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "omap3-beagle.dts" + +/ { + model = "TI OMAP3 BeagleBoard A to B4"; + compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"; +}; + +/* + * Workaround for capacitor C70 issue, see "Boards revision A and < B5" + * section at https://elinux.org/BeagleBoard_Community + */ + +/* Unusable as clocksource because of unreliable oscillator */ +&counter32k { + status = "disabled"; +}; + +/* Unusable as clockevent because of unreliable oscillator, allow to idle */ +&timer1_target { + /delete-property/ti,no-reset-on-init; + /delete-property/ti,no-idle; + timer@0 { + /delete-property/ti,timer-alwon; + }; +}; + +/* Preferred always-on timer for clocksource */ +&timer12_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + /* Always clocked by secure_32k_fck */ + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt2_fck>; + assigned-clock-parents = <&sys_ck>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -308,39 +308,6 @@ &usbhsehci { phys = <0 &hsusb2_phy>; }; -/* Unusable as clocksource because of unreliable oscillator */ -&counter32k { - status = "disabled"; -}; - -/* Unusable as clockevent because if unreliable oscillator, allow to idle */ -&timer1_target { - /delete-property/ti,no-reset-on-init; - /delete-property/ti,no-idle; - timer@0 { - /delete-property/ti,timer-alwon; - }; -}; - -/* Preferred always-on timer for clocksource */ -&timer12_target { - ti,no-reset-on-init; - ti,no-idle; - timer@0 { - /* Always clocked by secure_32k_fck */ - }; -}; - -/* Preferred timer for clockevent */ -&timer2_target { - ti,no-reset-on-init; - ti,no-idle; - timer@0 { - assigned-clocks = <&gpt2_fck>; - assigned-clock-parents = <&sys_ck>; - }; -}; - &twl_gpio { ti,use-leds; /* pullups: BIT(1) */ diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c --- a/drivers/clocksource/timer-ti-dm-systimer.c +++ b/drivers/clocksource/timer-ti-dm-systimer.c @@ -241,7 +241,7 @@ static void __init dmtimer_systimer_assign_alwon(void) bool quirk_unreliable_oscillator = false; /* Quirk unreliable 32 KiHz oscillator with incomplete dts */ - if (of_machine_is_compatible("ti,omap3-beagle") || + if (of_machine_is_compatible("ti,omap3-beagle-ab4") || of_machine_is_compatible("timll,omap3-devkit8000")) { quirk_unreliable_oscillator = true; counter_32k = -ENODEV;
Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3") caused a timer regression for beagleboard revision c where the system clockevent stops working if omap3isp module is unloaded. Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks applied that limit the usable timers for no good reason. This also affects the power management as we use the system clock instead of the 32k clock source. Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer quirks. This allows us to remove the timer quirks for later beagleboard revisions. We also need to update the related timer quirk check for the correct compatible property. Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3") Cc: linux-kernel@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh+dt@kernel.org> Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- .../devicetree/bindings/arm/omap/omap.txt | 3 ++ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap3-beagle-ab4.dts | 47 +++++++++++++++++++ arch/arm/boot/dts/omap3-beagle.dts | 33 ------------- drivers/clocksource/timer-ti-dm-systimer.c | 2 +- 5 files changed, 52 insertions(+), 34 deletions(-) create mode 100644 arch/arm/boot/dts/omap3-beagle-ab4.dts