| Message ID | 20211208185449.16763-4-jbx6244@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Naneng combo PHY support for RK3568 | expand |
Hi Yifeng, Some comments...Have a look if it is useful. The key question is: does this RFC serie work? Is someone able to give a test report? Could you produce a version 5 serie? - Include lee.jones@linaro.org for MFD syscon. Add "Acked by" to patch: dt-bindings: mfd: syscon: add naneng combo phy register compatible - Change description for rockchip,enable-ssc for PCIE, SATA and USB in patch: dt-bindings: phy: rockchip: Add Naneng combo PHY bindings Add change log for rob+dt for a new review that explains why his "Reviewed by" tag was not added. - If you like include some change suggestions from version 4. On 12/8/21 7:54 PM, Johan Jonker wrote: > From: Yifeng Zhao <yifeng.zhao@rock-chips.com> > > This patch implements a combo phy driver for Rockchip SoCs > with NaNeng IP block. This phy can be used as pcie-phy, usb3-phy, > sata-phy or sgmii-phy. From Rockchip RK3568 Datasheet V1.0-20201210.pdf page 16-17: Multi-PHY0 support one of the following interfaces USB3.0 OTG SATA0 Multi-PHY1 support one of the following interfaces USB3.0 Host SATA1 QSGMII/SGMII Multi-PHY2 support one of the following interfaces PCIe2.1 SATA2 QSGMII/SGMII === This driver or documentation never mentions the phy combinations that are possible and with which DT properties. Any suggestions? === Missing gmac SGMII support? ethernet: stmicro: stmmac: Add SGMII/QSGMII support for RK3568 https://github.com/rockchip-linux/kernel/commit/1fc7cbfe9e227c700c692f1de3137914b3ea6ca6 net: stmmac: dwmac-rk: Set XPCS port1 speed for GMAC1 SGMII mode https://github.com/rockchip-linux/kernel/commit/0b1548f20254539c4fcc24f79a50581dfe164cc3 === It looks like SGMII connects both to phy1 and phy2 ?? How to do that in DT ?? Any example/suggestions ?? gmac0: ethernet@fe2a0000 { ???? PHY_TYPE_SGMII } gmac1: ethernet@fe010000 { ???? PHY_TYPE_SGMII } sata0: sata@fc000000 { phys = <&combphy0 PHY_TYPE_SATA>; phy-names = "sata-phy"; } sata1: sata@fc400000 { phys = <&combphy1 PHY_TYPE_SATA>; phy-names = "sata-phy"; } sata2: sata@fc800000 { phys = <&combphy2 PHY_TYPE_SATA>; phy-names = "sata-phy"; } usbdrd3_0: usb@fcc00000 { phys = <&u2phy0_otg>, <&combphy0 PHY_TYPE_USB3>; phy-names = "usb2-phy", "usb3-phy"; } usbdrd3_1: usb@fd000000 { phys = <&u2phy0_host>, <&combphy1 PHY_TYPE_USB3>; phy-names = "usb2-phy", "usb3-phy"; } pcie2x1: pcie@fe260000 { phys = <&combphy2 PHY_TYPE_PCIE>; phy-names = "pcie-phy"; } > > Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> > Signed-off-by: Johan Jonker <jbx6244@gmail.com> > --- > > TEST COMPILED ONLY! > Driver not verified with hardware! > --- > > Changed V4: > restyle > add devm_reset_control_array_get() > remove clk structure > change refclk DT parse > change dev_err message > add dot to phrase > add ext_refclk variable > add enable_ssc variable > rename rockchip_combphy_param_write > remove param_read > replace rockchip-naneng-combphy driver name > --- > drivers/phy/rockchip/Kconfig | 8 + > drivers/phy/rockchip/Makefile | 1 + > .../rockchip/phy-rockchip-naneng-combphy.c | 608 ++++++++++++++++++ > 3 files changed, 617 insertions(+) > create mode 100644 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c > > diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig > index e812adad7..9022e395c 100644 > --- a/drivers/phy/rockchip/Kconfig > +++ b/drivers/phy/rockchip/Kconfig > @@ -66,6 +66,14 @@ config PHY_ROCKCHIP_INNO_DSIDPHY > Enable this to support the Rockchip MIPI/LVDS/TTL PHY with > Innosilicon IP block. > > +config PHY_ROCKCHIP_NANENG_COMBO_PHY > + tristate "Rockchip NANENG COMBO PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip PCIe/USB3.0/SATA/QSGMII > + combo PHY with NaNeng IP block. > + > config PHY_ROCKCHIP_PCIE > tristate "Rockchip PCIe PHY Driver" > depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST > diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile > index f0eec212b..a5041efb5 100644 > --- a/drivers/phy/rockchip/Makefile > +++ b/drivers/phy/rockchip/Makefile > @@ -6,6 +6,7 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY) += phy-rockchip-inno-csidphy.o > obj-$(CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY) += phy-rockchip-inno-dsidphy.o > obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI) += phy-rockchip-inno-hdmi.o > obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o > +obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY) += phy-rockchip-naneng-combphy.o > obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o > obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o > obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c > new file mode 100644 > index 000000000..56aaeed62 > --- /dev/null > +++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c > @@ -0,0 +1,608 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Rockchip PIPE USB3.0 PCIE SATA combphy driver > + * > + * Copyright (C) 2021 Rockchip Electronics Co., Ltd. > + */ > + > +#include <linux/clk.h> > +#include <linux/delay.h> > +#include <linux/io.h> > +#include <linux/iopoll.h> > +#include <linux/kernel.h> > +#include <linux/mfd/syscon.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/phy/phy.h> > +#include <linux/regmap.h> > +#include <linux/reset.h> > +#include <dt-bindings/phy/phy.h> > + > +#define BIT_WRITEABLE_SHIFT 16 > +#define REF_CLOCK_24MHz 24000000 > +#define REF_CLOCK_25MHz 25000000 > +#define REF_CLOCK_100MHz 100000000 > +/* RK3568 T22 COMBO PHY REG */ > +#define RK3568_T22_PHYREG5 0x14 > +#define T22_PHYREG5_PLL_DIV_MASK GENMASK(7, 6) > +#define T22_PHYREG5_PLL_DIV_SHIFT 6 > +#define T22_PHYREG5_PLL_DIV_2 1 > + > +#define RK3568_T22_PHYREG6 0x18 > +#define T22_PHYREG6_TX_RTERM_MASK GENMASK(7, 4) > +#define T22_PHYREG6_TX_RTERM_SHIFT 4 > +#define T22_PHYREG6_TX_RTERM_50OHM 0x8 > +#define T22_PHYREG6_RX_RTERM_MASK GENMASK(3, 0) > +#define T22_PHYREG6_RX_RTERM_SHIFT 0 > +#define T22_PHYREG6_RX_RTERM_44OHM 0xF > + > +#define RK3568_T22_PHYREG7 0x1C > +#define T22_PHYREG7_SSC_EN BIT(4) > + > +#define RK3568_T22_PHYREG10 0x28 > +#define T22_PHYREG10_SU_TRIM_0_7 0xF0 > + > +#define RK3568_T22_PHYREG11 0x2C > +#define T22_PHYREG11_PLL_LPF_ADJ 0x4 > + > +#define RK3568_T22_PHYREG12 0x30 > +#define T22_PHYREG12_RESISTER_MASK GENMASK(5, 4) > +#define T22_PHYREG12_RESISTER_SHIFT 0x4 > +#define T22_PHYREG12_RESISTER_HIGH_Z 0x3 > +#define T22_PHYREG12_CKRCV_AMP0 BIT(7) > + > +#define RK3568_T22_PHYREG13 0x34 > +#define T22_PHYREG13_CKRCV_AMP1 BIT(0) > + > +#define RK3568_T22_PHYREG14 0x38 > +#define T22_PHYREG14_CTLE_EN BIT(0) > +#define T22_PHYREG14_SSC_CNT_MASK GENMASK(7, 6) > +#define T22_PHYREG14_SSC_CNT_SHIFT 6 > +#define T22_PHYREG14_SSC_CNT_VALUE 0x1 > + > +#define RK3568_T22_PHYREG15 0x3C > +#define T22_PHYREG15_SSC_CNT_VALUE 0x5f > + > +#define RK3568_T22_PHYREG17 0x44 > +#define T22_PHYREG17_PLL_LOOP 0x32 > + > +#define RK3568_T22_PHYREG31 0x7C > +#define T22_PHYREG31_SSC_MASK GENMASK(7, 4) > +#define T22_PHYREG31_SSC_DIR_SHIFT 4 > +#define T22_PHYREG31_SSC_UPWARD 0 > +#define T22_PHYREG31_SSC_DOWNWARD 1 > +#define T22_PHYREG31_SSC_OFFSET_SHIFT 6 > +#define T22_PHYREG31_SSC_OFFSET_500PPM 1 Where in the TRM can I find this reg description? Can't find matching bits??? Rockchip RK3568 TRM Part2 V1.0-20210111.pdf page 1965 ??? Multi-PHY_Register032 Address: Operational Base + offset (0x007C) RES[7:0] [0]: bypass the mode of pd_ck100m controlling CKDRV 1'b0: CKDRV is on only in PCIE mode 1'b1: CKDRV is controlled by ckref_src[1:0]; [1]: select signal of pll_lock to TX/RX 1'b0: pll_lock is controlled by rate[1:0] 1'b1: pll_lock is not controlled by rate[1:0] [2]: bypass the mode of rate[1:0] controlling pll_lock_pcs 1'b0: pll_lock_pcs is controlled by rate[1:0] 1'b1: pll_lock_pcs is not controlled by rate[1:0] [7:3]: Reserved > + > +#define RK3568_T22_PHYREG32 0x80 > +#define T22_PHYREG32_PLL_KVCO_MASK GENMASK(4, 2) > +#define T22_PHYREG32_PLL_KVCO_SHIFT 2 > +#define T22_PHYREG32_PLL_KVCO_VALUE 2 > + > +struct rockchip_combphy_priv; > + > +struct combphy_reg { > + u16 offset; > + u16 bitend; > + u16 bitstart; > + u16 disable; > + u16 enable; > +}; > + > +struct rockchip_combphy_grfcfg { > + struct combphy_reg pcie_mode_set; > + struct combphy_reg usb_mode_set; > + struct combphy_reg sgmii_mode_set; > + struct combphy_reg qsgmii_mode_set; > + struct combphy_reg pipe_rxterm_set; > + struct combphy_reg pipe_txelec_set; > + struct combphy_reg pipe_txcomp_set; > + struct combphy_reg pipe_clk_25m; > + struct combphy_reg pipe_clk_100m; > + struct combphy_reg pipe_phymode_sel; > + struct combphy_reg pipe_rate_sel; > + struct combphy_reg pipe_rxterm_sel; > + struct combphy_reg pipe_txelec_sel; > + struct combphy_reg pipe_txcomp_sel; > + struct combphy_reg pipe_clk_ext; > + struct combphy_reg pipe_sel_usb; > + struct combphy_reg pipe_sel_qsgmii; > + struct combphy_reg pipe_phy_status; > + struct combphy_reg con0_for_pcie; > + struct combphy_reg con1_for_pcie; > + struct combphy_reg con2_for_pcie; > + struct combphy_reg con3_for_pcie; > + struct combphy_reg con0_for_sata; > + struct combphy_reg con1_for_sata; > + struct combphy_reg con2_for_sata; > + struct combphy_reg con3_for_sata; > + struct combphy_reg pipe_con0_for_sata; > + struct combphy_reg pipe_sgmii_mac_sel; > + struct combphy_reg pipe_xpcs_phy_ready; > + struct combphy_reg u3otg0_port_en; > + struct combphy_reg u3otg1_port_en; > +}; > + > +struct rockchip_combphy_cfg { > + const struct rockchip_combphy_grfcfg *grfcfg; > + int (*combphy_cfg)(struct rockchip_combphy_priv *priv); > +}; > + > +struct rockchip_combphy_priv { > + u8 mode; > + void __iomem *mmio; > + int num_clks; > + struct clk_bulk_data *clks; > + struct device *dev; > + struct regmap *pipe_grf; > + struct regmap *phy_grf; > + struct phy *phy; > + struct reset_control *phy_rst; > + const struct rockchip_combphy_cfg *cfg; > + bool enable_ssc; > + bool ext_refclk; > + struct clk *refclk; > +}; > + > +static int rockchip_combphy_param_write(struct regmap *base, > + const struct combphy_reg *reg, bool en) > +{ > + u32 val, mask, tmp; > + > + tmp = en ? reg->enable : reg->disable; > + mask = GENMASK(reg->bitend, reg->bitstart); > + val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT); > + > + return regmap_write(base, reg->offset, val); > +} > + > +static u32 rockchip_combphy_is_ready(struct rockchip_combphy_priv *priv) > +{ > + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; > + u32 mask, val; > + > + mask = GENMASK(cfg->pipe_phy_status.bitend, > + cfg->pipe_phy_status.bitstart); > + > + regmap_read(priv->phy_grf, cfg->pipe_phy_status.offset, &val); > + val = (val & mask) >> cfg->pipe_phy_status.bitstart; > + > + return val; > +} > + > +static int rockchip_combphy_set_mode(struct rockchip_combphy_priv *priv) > +{ > + int ret = 0; > + > + switch (priv->mode) { > + case PHY_TYPE_PCIE: > + case PHY_TYPE_USB3: > + case PHY_TYPE_SATA: > + case PHY_TYPE_SGMII: > + case PHY_TYPE_QSGMII: > + if (priv->cfg->combphy_cfg) > + ret = priv->cfg->combphy_cfg(priv); > + break; > + default: > + dev_err(priv->dev, "incompatible PHY type\n"); > + return -EINVAL; > + } > + > + if (ret) > + dev_err(priv->dev, "failed to init phy for phy mode %x\n", priv->mode); > + > + return ret; > +} > + > +static int rockchip_combphy_init(struct phy *phy) > +{ > + struct rockchip_combphy_priv *priv = phy_get_drvdata(phy); > + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; > + u32 val; > + int ret; > + > + ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks); > + if (ret) { > + dev_err(priv->dev, "failed to enable clks\n"); > + return ret; > + } > + > + ret = rockchip_combphy_set_mode(priv); > + if (ret) > + goto err_clk; > + > + ret = reset_control_deassert(priv->phy_rst); > + if (ret) > + goto err_clk; > + > + if (priv->mode == PHY_TYPE_USB3) { > + ret = readx_poll_timeout_atomic(rockchip_combphy_is_ready, > + priv, val, > + val == cfg->pipe_phy_status.enable, > + 10, 1000); > + if (ret) > + dev_warn(priv->dev, "wait phy status ready timeout\n"); > + } > + > + return 0; > + > +err_clk: > + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); > + > + return ret; > +} > + > +static int rockchip_combphy_exit(struct phy *phy) > +{ > + struct rockchip_combphy_priv *priv = phy_get_drvdata(phy); > + > + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); > + reset_control_assert(priv->phy_rst); > + > + return 0; > +} > + > +static const struct phy_ops rochchip_combphy_ops = { > + .init = rockchip_combphy_init, > + .exit = rockchip_combphy_exit, > + .owner = THIS_MODULE, > +}; > + > +static struct phy *rockchip_combphy_xlate(struct device *dev, struct of_phandle_args *args) > +{ > + struct rockchip_combphy_priv *priv = dev_get_drvdata(dev); > + > + if (args->args_count != 1) { > + dev_err(dev, "invalid number of arguments\n"); > + return ERR_PTR(-EINVAL); > + } > + > + if (priv->mode != PHY_NONE && priv->mode != args->args[0]) > + dev_warn(dev, "phy type select %d overwriting type %d\n", > + args->args[0], priv->mode); > + > + priv->mode = args->args[0]; > + > + return priv->phy; > +} > + > +static int rockchip_combphy_parse_dt(struct device *dev, struct rockchip_combphy_priv *priv) > +{ > + const struct rockchip_combphy_cfg *phy_cfg = priv->cfg; > + int mac_id; > + int i; > + > + priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks); > + if (priv->num_clks < 1) > + return -EINVAL; > + > + priv->refclk = NULL; > + for (i = 0; i < priv->num_clks; i++) { > + if (!strncmp(priv->clks[i].id, "ref", 3)) { > + priv->refclk = priv->clks[i].clk; > + break; > + } > + } > + > + if (!priv->refclk) { > + dev_err(dev, "no refclk found\n"); > + return -EINVAL; > + } > + > + priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-grf"); > + if (IS_ERR(priv->pipe_grf)) { > + dev_err(dev, "failed to find peri_ctrl pipe-grf regmap\n"); > + return PTR_ERR(priv->pipe_grf); > + } > + > + priv->phy_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-phy-grf"); > + if (IS_ERR(priv->phy_grf)) { > + dev_err(dev, "failed to find peri_ctrl pipe-phy-grf regmap\n"); > + return PTR_ERR(priv->phy_grf); > + } > + > + if (device_property_present(dev, "rockchip,dis-u3otg0-port")) > + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->u3otg0_port_en, > + false); > + > + if (device_property_present(dev, "rockchip,dis-u3otg1-port")) > + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->u3otg1_port_en, > + false); > + > + priv->enable_ssc = device_property_present(dev, "rockchip,enable-ssc"); > + > + priv->ext_refclk = device_property_present(dev, "rockchip,ext-refclk"); > + > + if (!device_property_read_u32(dev, "rockchip,sgmii-mac-sel", &mac_id) && > + (mac_id > 0)) > + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->pipe_sgmii_mac_sel, > + true); > + else > + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->pipe_sgmii_mac_sel, > + false); When a module is reloaded or when bits are previously set by u-boot it doesn't garantee that they are in default state, does it? Maybe always set them regardless if the property is present to default or a value. val = condition ? true : false; rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->pipe_sgmii_mac_sel, val); > + > + priv->phy_rst = devm_reset_control_array_get(dev, false, false); Does this work? > + if (IS_ERR(priv->phy_rst)) > + return dev_err_probe(dev, PTR_ERR(priv->phy_rst), "failed to get phy reset\n"); > + > + return 0; > +} > + > +static int rockchip_combphy_probe(struct platform_device *pdev) > +{ > + struct phy_provider *phy_provider; > + struct device *dev = &pdev->dev; > + struct rockchip_combphy_priv *priv; > + const struct rockchip_combphy_cfg *phy_cfg; > + struct resource *res; > + int ret; > + > + phy_cfg = of_device_get_match_data(dev); > + if (!phy_cfg) { > + dev_err(dev, "no OF match data provided\n"); > + return -EINVAL; > + } > + > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + priv->mmio = devm_platform_get_and_ioremap_resource(pdev, 0, &res); > + if (IS_ERR(priv->mmio)) { > + ret = PTR_ERR(priv->mmio); > + return ret; > + } > + > + priv->dev = dev; > + priv->mode = PHY_NONE; > + priv->cfg = phy_cfg; > + > + ret = rockchip_combphy_parse_dt(dev, priv); > + if (ret) > + return ret; > + > + ret = reset_control_assert(priv->phy_rst); > + if (ret) { > + dev_err(dev, "failed to reset phy\n"); > + return ret; > + } > + > + priv->phy = devm_phy_create(dev, NULL, &rochchip_combphy_ops); > + if (IS_ERR(priv->phy)) { > + dev_err(dev, "failed to create combphy\n"); > + return PTR_ERR(priv->phy); > + } > + > + dev_set_drvdata(dev, priv); > + phy_set_drvdata(priv->phy, priv); > + > + phy_provider = devm_of_phy_provider_register(dev, rockchip_combphy_xlate); > + > + return PTR_ERR_OR_ZERO(phy_provider); > +} > + > +static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv) > +{ > + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; > + unsigned long rate; > + u32 val; > + > + switch (priv->mode) { > + case PHY_TYPE_PCIE: > + /* Set SSC downward spread spectrum. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG31); > + val &= ~T22_PHYREG31_SSC_MASK; > + val |= T22_PHYREG31_SSC_DOWNWARD << T22_PHYREG31_SSC_DIR_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG31); > + > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true); > + break; > + case PHY_TYPE_USB3: > + /* Set SSC downward spread spectrum. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG31); > + val &= ~T22_PHYREG31_SSC_MASK; > + val |= T22_PHYREG31_SSC_DOWNWARD << T22_PHYREG31_SSC_DIR_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG31); > + > + /* Enable adaptive CTLE for USB3.0 Rx. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG14); > + val |= T22_PHYREG14_CTLE_EN; > + writel(val, priv->mmio + RK3568_T22_PHYREG14); > + > + /* Set PLL KVCO fine tuning signals. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG32); > + val &= ~T22_PHYREG32_PLL_KVCO_MASK; > + val |= T22_PHYREG32_PLL_KVCO_VALUE << T22_PHYREG32_PLL_KVCO_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG32); > + > + /* Enable controlling random jitter. */ > + writel(T22_PHYREG11_PLL_LPF_ADJ, priv->mmio + RK3568_T22_PHYREG11); > + > + /* Set PLL input clock divider 1/2. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG5); > + val &= ~T22_PHYREG5_PLL_DIV_MASK; > + val |= T22_PHYREG5_PLL_DIV_2 << T22_PHYREG5_PLL_DIV_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG5); > + > + writel(T22_PHYREG17_PLL_LOOP, priv->mmio + RK3568_T22_PHYREG17); > + writel(T22_PHYREG10_SU_TRIM_0_7, priv->mmio + RK3568_T22_PHYREG10); > + > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_usb, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true); > + break; > + case PHY_TYPE_SATA: > + /* Enable adaptive CTLE for SATA Rx. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG14); > + val |= T22_PHYREG14_CTLE_EN; > + writel(val, priv->mmio + RK3568_T22_PHYREG14); > + /* > + * Set tx_rterm=50ohm and rx_rterm=44ohm for SATA. > + * 0: 60ohm, 8: 50ohm 15: 44ohm (by step abort 1ohm) > + */ > + val = T22_PHYREG6_TX_RTERM_50OHM << T22_PHYREG6_TX_RTERM_SHIFT; > + val |= T22_PHYREG6_RX_RTERM_44OHM << T22_PHYREG6_RX_RTERM_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG6); > + > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true); > + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true); > + break; > + case PHY_TYPE_SGMII: > + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->sgmii_mode_set, true); > + break; > + case PHY_TYPE_QSGMII: > + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_rate_sel, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->qsgmii_mode_set, true); > + break; > + default: > + dev_err(priv->dev, "incompatible PHY type\n"); > + return -EINVAL; > + } > + > + rate = clk_get_rate(priv->refclk); > + > + switch (rate) { > + case REF_CLOCK_24MHz: > + if (priv->mode == PHY_TYPE_USB3 || priv->mode == PHY_TYPE_SATA) { > + /* Set ssc_cnt[9:0]=0101111101 & 31.5KHz. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG14); > + val &= ~T22_PHYREG14_SSC_CNT_MASK; > + val |= T22_PHYREG14_SSC_CNT_VALUE << T22_PHYREG14_SSC_CNT_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG14); > + writel(T22_PHYREG15_SSC_CNT_VALUE, priv->mmio + RK3568_T22_PHYREG15); > + } > + break; > + case REF_CLOCK_25MHz: > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); > + break; > + case REF_CLOCK_100MHz: > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); > + if (priv->mode == PHY_TYPE_PCIE) { > + /* PLL KVCO fine tuning. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG32); > + val &= ~T22_PHYREG32_PLL_KVCO_MASK; > + val |= T22_PHYREG32_PLL_KVCO_VALUE << T22_PHYREG32_PLL_KVCO_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG32); > + > + /* Enable controlling random jitter. */ > + writel(T22_PHYREG11_PLL_LPF_ADJ, priv->mmio + RK3568_T22_PHYREG11); > + > + val = readl(priv->mmio + RK3568_T22_PHYREG5); > + val &= ~T22_PHYREG5_PLL_DIV_MASK; > + val |= T22_PHYREG5_PLL_DIV_2 << T22_PHYREG5_PLL_DIV_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG5); > + > + writel(T22_PHYREG17_PLL_LOOP, priv->mmio + RK3568_T22_PHYREG17); > + writel(T22_PHYREG10_SU_TRIM_0_7, priv->mmio + RK3568_T22_PHYREG10); > + } else if (priv->mode == PHY_TYPE_SATA) { > + /* downward spread spectrum +500ppm */ > + val = readl(priv->mmio + RK3568_T22_PHYREG31); > + val &= ~T22_PHYREG31_SSC_MASK; > + val |= T22_PHYREG31_SSC_DOWNWARD << T22_PHYREG31_SSC_DIR_SHIFT; > + val |= T22_PHYREG31_SSC_OFFSET_500PPM << T22_PHYREG31_SSC_OFFSET_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG31); > + } > + break; > + default: > + dev_err(priv->dev, "unsupported rate: %lu\n", rate); > + return -EINVAL; > + } > + > + if (priv->ext_refclk) { > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); > + if (priv->mode == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { > + val = readl(priv->mmio + RK3568_T22_PHYREG12); > + val &= ~T22_PHYREG12_RESISTER_MASK; > + val |= T22_PHYREG12_RESISTER_HIGH_Z << T22_PHYREG12_RESISTER_SHIFT; > + val |= T22_PHYREG12_CKRCV_AMP0; > + writel(val, priv->mmio + RK3568_T22_PHYREG12); > + > + val = readl(priv->mmio + RK3568_T22_PHYREG13); > + val |= T22_PHYREG13_CKRCV_AMP1; > + writel(val, priv->mmio + RK3568_T22_PHYREG13); > + } > + } > + > + if (priv->enable_ssc) { > + val = readl(priv->mmio + RK3568_T22_PHYREG7); > + val |= T22_PHYREG7_SSC_EN; > + writel(val, priv->mmio + RK3568_T22_PHYREG7); > + } > + > + return 0; > +} > + > +static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = { > + /* pipe-phy-grf */ > + .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, > + .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, > + .sgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x01 }, > + .qsgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x21 }, > + .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, > + .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, > + .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, > + .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 }, > + .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, > + .pipe_phymode_sel = { 0x0008, 1, 1, 0x00, 0x01 }, > + .pipe_rate_sel = { 0x0008, 2, 2, 0x00, 0x01 }, > + .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, > + .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, > + .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, > + .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, > + .pipe_sel_usb = { 0x000c, 14, 13, 0x00, 0x01 }, > + .pipe_sel_qsgmii = { 0x000c, 15, 13, 0x00, 0x07 }, > + .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, > + .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 }, > + .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 }, > + .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 }, > + .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, > + .con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0119 }, > + .con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0040 }, > + .con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c3 }, > + .con3_for_sata = { 0x000c, 15, 0, 0x00, 0x4407 }, > + /* pipe-grf */ > + .pipe_con0_for_sata = { 0x0000, 15, 0, 0x00, 0x2220 }, > + .pipe_sgmii_mac_sel = { 0x0040, 1, 1, 0x00, 0x01 }, > + .pipe_xpcs_phy_ready = { 0x0040, 2, 2, 0x00, 0x01 }, > + .u3otg0_port_en = { 0x0104, 15, 0, 0x0181, 0x1100 }, > + .u3otg1_port_en = { 0x0144, 15, 0, 0x0181, 0x1100 }, > +}; > + > +static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = { > + .grfcfg = &rk3568_combphy_grfcfgs, > + .combphy_cfg = rk3568_combphy_cfg, > +}; > + > +static const struct of_device_id rockchip_combphy_of_match[] = { > + { > + .compatible = "rockchip,rk3568-naneng-combphy", > + .data = &rk3568_combphy_cfgs, > + }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, rockchip_combphy_of_match); > + > +static struct platform_driver rockchip_combphy_driver = { > + .probe = rockchip_combphy_probe, > + .driver = { > + .name = "rockchip-naneng-combphy", > + .of_match_table = rockchip_combphy_of_match, > + }, > +}; > +module_platform_driver(rockchip_combphy_driver); > + > +MODULE_DESCRIPTION("Rockchip NANENG COMBPHY driver"); > +MODULE_LICENSE("GPL v2"); >
On 08-12-21, 19:54, Johan Jonker wrote: > From: Yifeng Zhao <yifeng.zhao@rock-chips.com> > > This patch implements a combo phy driver for Rockchip SoCs > with NaNeng IP block. This phy can be used as pcie-phy, usb3-phy, > sata-phy or sgmii-phy. > > Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> > Signed-off-by: Johan Jonker <jbx6244@gmail.com> > --- > > TEST COMPILED ONLY! > Driver not verified with hardware! > --- > > Changed V4: > restyle > add devm_reset_control_array_get() > remove clk structure > change refclk DT parse > change dev_err message > add dot to phrase > add ext_refclk variable > add enable_ssc variable > rename rockchip_combphy_param_write > remove param_read > replace rockchip-naneng-combphy driver name > --- > drivers/phy/rockchip/Kconfig | 8 + > drivers/phy/rockchip/Makefile | 1 + > .../rockchip/phy-rockchip-naneng-combphy.c | 608 ++++++++++++++++++ > 3 files changed, 617 insertions(+) > create mode 100644 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c > > diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig > index e812adad7..9022e395c 100644 > --- a/drivers/phy/rockchip/Kconfig > +++ b/drivers/phy/rockchip/Kconfig > @@ -66,6 +66,14 @@ config PHY_ROCKCHIP_INNO_DSIDPHY > Enable this to support the Rockchip MIPI/LVDS/TTL PHY with > Innosilicon IP block. > > +config PHY_ROCKCHIP_NANENG_COMBO_PHY > + tristate "Rockchip NANENG COMBO PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip PCIe/USB3.0/SATA/QSGMII > + combo PHY with NaNeng IP block. > + > config PHY_ROCKCHIP_PCIE > tristate "Rockchip PCIe PHY Driver" > depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST > diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile > index f0eec212b..a5041efb5 100644 > --- a/drivers/phy/rockchip/Makefile > +++ b/drivers/phy/rockchip/Makefile > @@ -6,6 +6,7 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY) += phy-rockchip-inno-csidphy.o > obj-$(CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY) += phy-rockchip-inno-dsidphy.o > obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI) += phy-rockchip-inno-hdmi.o > obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o > +obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY) += phy-rockchip-naneng-combphy.o > obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o > obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o > obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o > diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c > new file mode 100644 > index 000000000..56aaeed62 > --- /dev/null > +++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c > @@ -0,0 +1,608 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Rockchip PIPE USB3.0 PCIE SATA combphy driver > + * > + * Copyright (C) 2021 Rockchip Electronics Co., Ltd. > + */ > + > +#include <linux/clk.h> > +#include <linux/delay.h> > +#include <linux/io.h> > +#include <linux/iopoll.h> > +#include <linux/kernel.h> > +#include <linux/mfd/syscon.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/phy/phy.h> > +#include <linux/regmap.h> > +#include <linux/reset.h> > +#include <dt-bindings/phy/phy.h> > + > +#define BIT_WRITEABLE_SHIFT 16 > +#define REF_CLOCK_24MHz 24000000 How about 24 * MEGA (see units.h) > +#define REF_CLOCK_25MHz 25000000 > +#define REF_CLOCK_100MHz 100000000 empty line here pls > +/* RK3568 T22 COMBO PHY REG */ > +#define RK3568_T22_PHYREG5 0x14 > +#define T22_PHYREG5_PLL_DIV_MASK GENMASK(7, 6) > +#define T22_PHYREG5_PLL_DIV_SHIFT 6 > +#define T22_PHYREG5_PLL_DIV_2 1 > + > +#define RK3568_T22_PHYREG6 0x18 > +#define T22_PHYREG6_TX_RTERM_MASK GENMASK(7, 4) > +#define T22_PHYREG6_TX_RTERM_SHIFT 4 > +#define T22_PHYREG6_TX_RTERM_50OHM 0x8 > +#define T22_PHYREG6_RX_RTERM_MASK GENMASK(3, 0) > +#define T22_PHYREG6_RX_RTERM_SHIFT 0 You can avoid using SHIFT macros by defining register masks using BIT, GENMASK and then use FIELD_PREP() and FIELD_GET() to set and get register values > +#define T22_PHYREG6_RX_RTERM_44OHM 0xF > + > +#define RK3568_T22_PHYREG7 0x1C > +#define T22_PHYREG7_SSC_EN BIT(4) > + > +#define RK3568_T22_PHYREG10 0x28 > +#define T22_PHYREG10_SU_TRIM_0_7 0xF0 GENMASK() ? > + > +#define RK3568_T22_PHYREG11 0x2C > +#define T22_PHYREG11_PLL_LPF_ADJ 0x4 BIT(), here and other places applicable > + > +#define RK3568_T22_PHYREG12 0x30 > +#define T22_PHYREG12_RESISTER_MASK GENMASK(5, 4) > +#define T22_PHYREG12_RESISTER_SHIFT 0x4 > +#define T22_PHYREG12_RESISTER_HIGH_Z 0x3 > +#define T22_PHYREG12_CKRCV_AMP0 BIT(7) > + > +#define RK3568_T22_PHYREG13 0x34 > +#define T22_PHYREG13_CKRCV_AMP1 BIT(0) > + > +#define RK3568_T22_PHYREG14 0x38 > +#define T22_PHYREG14_CTLE_EN BIT(0) > +#define T22_PHYREG14_SSC_CNT_MASK GENMASK(7, 6) > +#define T22_PHYREG14_SSC_CNT_SHIFT 6 > +#define T22_PHYREG14_SSC_CNT_VALUE 0x1 > + > +#define RK3568_T22_PHYREG15 0x3C > +#define T22_PHYREG15_SSC_CNT_VALUE 0x5f > + > +#define RK3568_T22_PHYREG17 0x44 > +#define T22_PHYREG17_PLL_LOOP 0x32 > + > +#define RK3568_T22_PHYREG31 0x7C > +#define T22_PHYREG31_SSC_MASK GENMASK(7, 4) > +#define T22_PHYREG31_SSC_DIR_SHIFT 4 > +#define T22_PHYREG31_SSC_UPWARD 0 > +#define T22_PHYREG31_SSC_DOWNWARD 1 > +#define T22_PHYREG31_SSC_OFFSET_SHIFT 6 > +#define T22_PHYREG31_SSC_OFFSET_500PPM 1 > + > +#define RK3568_T22_PHYREG32 0x80 > +#define T22_PHYREG32_PLL_KVCO_MASK GENMASK(4, 2) > +#define T22_PHYREG32_PLL_KVCO_SHIFT 2 > +#define T22_PHYREG32_PLL_KVCO_VALUE 2 > + > +struct rockchip_combphy_priv; > + > +struct combphy_reg { > + u16 offset; > + u16 bitend; > + u16 bitstart; > + u16 disable; > + u16 enable; > +}; > + > +struct rockchip_combphy_grfcfg { > + struct combphy_reg pcie_mode_set; > + struct combphy_reg usb_mode_set; > + struct combphy_reg sgmii_mode_set; > + struct combphy_reg qsgmii_mode_set; > + struct combphy_reg pipe_rxterm_set; > + struct combphy_reg pipe_txelec_set; > + struct combphy_reg pipe_txcomp_set; > + struct combphy_reg pipe_clk_25m; > + struct combphy_reg pipe_clk_100m; > + struct combphy_reg pipe_phymode_sel; > + struct combphy_reg pipe_rate_sel; > + struct combphy_reg pipe_rxterm_sel; > + struct combphy_reg pipe_txelec_sel; > + struct combphy_reg pipe_txcomp_sel; > + struct combphy_reg pipe_clk_ext; > + struct combphy_reg pipe_sel_usb; > + struct combphy_reg pipe_sel_qsgmii; > + struct combphy_reg pipe_phy_status; > + struct combphy_reg con0_for_pcie; > + struct combphy_reg con1_for_pcie; > + struct combphy_reg con2_for_pcie; > + struct combphy_reg con3_for_pcie; > + struct combphy_reg con0_for_sata; > + struct combphy_reg con1_for_sata; > + struct combphy_reg con2_for_sata; > + struct combphy_reg con3_for_sata; > + struct combphy_reg pipe_con0_for_sata; > + struct combphy_reg pipe_sgmii_mac_sel; > + struct combphy_reg pipe_xpcs_phy_ready; > + struct combphy_reg u3otg0_port_en; > + struct combphy_reg u3otg1_port_en; > +}; > + > +struct rockchip_combphy_cfg { > + const struct rockchip_combphy_grfcfg *grfcfg; > + int (*combphy_cfg)(struct rockchip_combphy_priv *priv); > +}; > + > +struct rockchip_combphy_priv { > + u8 mode; > + void __iomem *mmio; > + int num_clks; > + struct clk_bulk_data *clks; > + struct device *dev; > + struct regmap *pipe_grf; > + struct regmap *phy_grf; > + struct phy *phy; > + struct reset_control *phy_rst; > + const struct rockchip_combphy_cfg *cfg; > + bool enable_ssc; > + bool ext_refclk; > + struct clk *refclk; > +}; > + > +static int rockchip_combphy_param_write(struct regmap *base, > + const struct combphy_reg *reg, bool en) pls align to previous line open brace (hint, checkpatch with --strict will find these for you) > +{ > + u32 val, mask, tmp; > + > + tmp = en ? reg->enable : reg->disable; > + mask = GENMASK(reg->bitend, reg->bitstart); > + val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT); > + > + return regmap_write(base, reg->offset, val); > +} > + > +static u32 rockchip_combphy_is_ready(struct rockchip_combphy_priv *priv) > +{ > + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; > + u32 mask, val; > + > + mask = GENMASK(cfg->pipe_phy_status.bitend, > + cfg->pipe_phy_status.bitstart); > + > + regmap_read(priv->phy_grf, cfg->pipe_phy_status.offset, &val); > + val = (val & mask) >> cfg->pipe_phy_status.bitstart; > + > + return val; > +} > + > +static int rockchip_combphy_set_mode(struct rockchip_combphy_priv *priv) > +{ > + int ret = 0; > + > + switch (priv->mode) { > + case PHY_TYPE_PCIE: > + case PHY_TYPE_USB3: > + case PHY_TYPE_SATA: > + case PHY_TYPE_SGMII: > + case PHY_TYPE_QSGMII: > + if (priv->cfg->combphy_cfg) > + ret = priv->cfg->combphy_cfg(priv); > + break; > + default: > + dev_err(priv->dev, "incompatible PHY type\n"); > + return -EINVAL; > + } > + > + if (ret) > + dev_err(priv->dev, "failed to init phy for phy mode %x\n", priv->mode); > + > + return ret; > +} > + > +static int rockchip_combphy_init(struct phy *phy) > +{ > + struct rockchip_combphy_priv *priv = phy_get_drvdata(phy); > + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; > + u32 val; > + int ret; > + > + ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks); > + if (ret) { > + dev_err(priv->dev, "failed to enable clks\n"); > + return ret; > + } > + > + ret = rockchip_combphy_set_mode(priv); > + if (ret) > + goto err_clk; > + > + ret = reset_control_deassert(priv->phy_rst); > + if (ret) > + goto err_clk; > + > + if (priv->mode == PHY_TYPE_USB3) { > + ret = readx_poll_timeout_atomic(rockchip_combphy_is_ready, > + priv, val, > + val == cfg->pipe_phy_status.enable, > + 10, 1000); > + if (ret) > + dev_warn(priv->dev, "wait phy status ready timeout\n"); > + } > + > + return 0; > + > +err_clk: > + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); > + > + return ret; > +} > + > +static int rockchip_combphy_exit(struct phy *phy) > +{ > + struct rockchip_combphy_priv *priv = phy_get_drvdata(phy); > + > + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); > + reset_control_assert(priv->phy_rst); > + > + return 0; > +} > + > +static const struct phy_ops rochchip_combphy_ops = { > + .init = rockchip_combphy_init, > + .exit = rockchip_combphy_exit, > + .owner = THIS_MODULE, > +}; > + > +static struct phy *rockchip_combphy_xlate(struct device *dev, struct of_phandle_args *args) > +{ > + struct rockchip_combphy_priv *priv = dev_get_drvdata(dev); > + > + if (args->args_count != 1) { > + dev_err(dev, "invalid number of arguments\n"); > + return ERR_PTR(-EINVAL); > + } > + > + if (priv->mode != PHY_NONE && priv->mode != args->args[0]) > + dev_warn(dev, "phy type select %d overwriting type %d\n", > + args->args[0], priv->mode); > + > + priv->mode = args->args[0]; > + > + return priv->phy; > +} > + > +static int rockchip_combphy_parse_dt(struct device *dev, struct rockchip_combphy_priv *priv) > +{ > + const struct rockchip_combphy_cfg *phy_cfg = priv->cfg; > + int mac_id; > + int i; > + > + priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks); > + if (priv->num_clks < 1) > + return -EINVAL; > + > + priv->refclk = NULL; > + for (i = 0; i < priv->num_clks; i++) { > + if (!strncmp(priv->clks[i].id, "ref", 3)) { > + priv->refclk = priv->clks[i].clk; > + break; > + } > + } > + > + if (!priv->refclk) { > + dev_err(dev, "no refclk found\n"); > + return -EINVAL; > + } > + > + priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-grf"); > + if (IS_ERR(priv->pipe_grf)) { > + dev_err(dev, "failed to find peri_ctrl pipe-grf regmap\n"); > + return PTR_ERR(priv->pipe_grf); > + } > + > + priv->phy_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-phy-grf"); > + if (IS_ERR(priv->phy_grf)) { > + dev_err(dev, "failed to find peri_ctrl pipe-phy-grf regmap\n"); > + return PTR_ERR(priv->phy_grf); > + } > + > + if (device_property_present(dev, "rockchip,dis-u3otg0-port")) > + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->u3otg0_port_en, > + false); > + > + if (device_property_present(dev, "rockchip,dis-u3otg1-port")) > + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->u3otg1_port_en, > + false); > + > + priv->enable_ssc = device_property_present(dev, "rockchip,enable-ssc"); > + > + priv->ext_refclk = device_property_present(dev, "rockchip,ext-refclk"); > + > + if (!device_property_read_u32(dev, "rockchip,sgmii-mac-sel", &mac_id) && > + (mac_id > 0)) > + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->pipe_sgmii_mac_sel, > + true); > + else > + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->pipe_sgmii_mac_sel, > + false); > + > + priv->phy_rst = devm_reset_control_array_get(dev, false, false); > + if (IS_ERR(priv->phy_rst)) > + return dev_err_probe(dev, PTR_ERR(priv->phy_rst), "failed to get phy reset\n"); > + > + return 0; > +} > + > +static int rockchip_combphy_probe(struct platform_device *pdev) > +{ > + struct phy_provider *phy_provider; > + struct device *dev = &pdev->dev; > + struct rockchip_combphy_priv *priv; > + const struct rockchip_combphy_cfg *phy_cfg; > + struct resource *res; > + int ret; > + > + phy_cfg = of_device_get_match_data(dev); > + if (!phy_cfg) { > + dev_err(dev, "no OF match data provided\n"); > + return -EINVAL; > + } > + > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + priv->mmio = devm_platform_get_and_ioremap_resource(pdev, 0, &res); > + if (IS_ERR(priv->mmio)) { > + ret = PTR_ERR(priv->mmio); > + return ret; > + } > + > + priv->dev = dev; > + priv->mode = PHY_NONE; > + priv->cfg = phy_cfg; > + > + ret = rockchip_combphy_parse_dt(dev, priv); > + if (ret) > + return ret; > + > + ret = reset_control_assert(priv->phy_rst); > + if (ret) { > + dev_err(dev, "failed to reset phy\n"); > + return ret; > + } > + > + priv->phy = devm_phy_create(dev, NULL, &rochchip_combphy_ops); > + if (IS_ERR(priv->phy)) { > + dev_err(dev, "failed to create combphy\n"); > + return PTR_ERR(priv->phy); > + } > + > + dev_set_drvdata(dev, priv); > + phy_set_drvdata(priv->phy, priv); > + > + phy_provider = devm_of_phy_provider_register(dev, rockchip_combphy_xlate); > + > + return PTR_ERR_OR_ZERO(phy_provider); > +} > + > +static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv) > +{ > + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; > + unsigned long rate; > + u32 val; > + > + switch (priv->mode) { > + case PHY_TYPE_PCIE: > + /* Set SSC downward spread spectrum. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG31); > + val &= ~T22_PHYREG31_SSC_MASK; > + val |= T22_PHYREG31_SSC_DOWNWARD << T22_PHYREG31_SSC_DIR_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG31); > + > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true); > + break; empty line here helps readability > + case PHY_TYPE_USB3: > + /* Set SSC downward spread spectrum. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG31); > + val &= ~T22_PHYREG31_SSC_MASK; > + val |= T22_PHYREG31_SSC_DOWNWARD << T22_PHYREG31_SSC_DIR_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG31); perhaps a updatel() macro to help with this? > + > + /* Enable adaptive CTLE for USB3.0 Rx. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG14); > + val |= T22_PHYREG14_CTLE_EN; > + writel(val, priv->mmio + RK3568_T22_PHYREG14); > + > + /* Set PLL KVCO fine tuning signals. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG32); > + val &= ~T22_PHYREG32_PLL_KVCO_MASK; > + val |= T22_PHYREG32_PLL_KVCO_VALUE << T22_PHYREG32_PLL_KVCO_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG32); > + > + /* Enable controlling random jitter. */ > + writel(T22_PHYREG11_PLL_LPF_ADJ, priv->mmio + RK3568_T22_PHYREG11); > + > + /* Set PLL input clock divider 1/2. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG5); > + val &= ~T22_PHYREG5_PLL_DIV_MASK; > + val |= T22_PHYREG5_PLL_DIV_2 << T22_PHYREG5_PLL_DIV_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG5); > + > + writel(T22_PHYREG17_PLL_LOOP, priv->mmio + RK3568_T22_PHYREG17); > + writel(T22_PHYREG10_SU_TRIM_0_7, priv->mmio + RK3568_T22_PHYREG10); > + > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_usb, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true); > + break; > + case PHY_TYPE_SATA: > + /* Enable adaptive CTLE for SATA Rx. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG14); > + val |= T22_PHYREG14_CTLE_EN; > + writel(val, priv->mmio + RK3568_T22_PHYREG14); > + /* > + * Set tx_rterm=50ohm and rx_rterm=44ohm for SATA. > + * 0: 60ohm, 8: 50ohm 15: 44ohm (by step abort 1ohm) > + */ > + val = T22_PHYREG6_TX_RTERM_50OHM << T22_PHYREG6_TX_RTERM_SHIFT; > + val |= T22_PHYREG6_RX_RTERM_44OHM << T22_PHYREG6_RX_RTERM_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG6); > + > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true); > + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true); > + break; > + case PHY_TYPE_SGMII: > + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->sgmii_mode_set, true); > + break; > + case PHY_TYPE_QSGMII: > + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_rate_sel, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true); > + rockchip_combphy_param_write(priv->phy_grf, &cfg->qsgmii_mode_set, true); > + break; > + default: > + dev_err(priv->dev, "incompatible PHY type\n"); > + return -EINVAL; > + } > + > + rate = clk_get_rate(priv->refclk); > + > + switch (rate) { > + case REF_CLOCK_24MHz: > + if (priv->mode == PHY_TYPE_USB3 || priv->mode == PHY_TYPE_SATA) { > + /* Set ssc_cnt[9:0]=0101111101 & 31.5KHz. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG14); > + val &= ~T22_PHYREG14_SSC_CNT_MASK; > + val |= T22_PHYREG14_SSC_CNT_VALUE << T22_PHYREG14_SSC_CNT_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG14); > + writel(T22_PHYREG15_SSC_CNT_VALUE, priv->mmio + RK3568_T22_PHYREG15); > + } > + break; > + case REF_CLOCK_25MHz: > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); > + break; > + case REF_CLOCK_100MHz: > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); > + if (priv->mode == PHY_TYPE_PCIE) { > + /* PLL KVCO fine tuning. */ > + val = readl(priv->mmio + RK3568_T22_PHYREG32); > + val &= ~T22_PHYREG32_PLL_KVCO_MASK; > + val |= T22_PHYREG32_PLL_KVCO_VALUE << T22_PHYREG32_PLL_KVCO_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG32); > + > + /* Enable controlling random jitter. */ > + writel(T22_PHYREG11_PLL_LPF_ADJ, priv->mmio + RK3568_T22_PHYREG11); > + > + val = readl(priv->mmio + RK3568_T22_PHYREG5); > + val &= ~T22_PHYREG5_PLL_DIV_MASK; > + val |= T22_PHYREG5_PLL_DIV_2 << T22_PHYREG5_PLL_DIV_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG5); > + > + writel(T22_PHYREG17_PLL_LOOP, priv->mmio + RK3568_T22_PHYREG17); > + writel(T22_PHYREG10_SU_TRIM_0_7, priv->mmio + RK3568_T22_PHYREG10); > + } else if (priv->mode == PHY_TYPE_SATA) { > + /* downward spread spectrum +500ppm */ > + val = readl(priv->mmio + RK3568_T22_PHYREG31); > + val &= ~T22_PHYREG31_SSC_MASK; > + val |= T22_PHYREG31_SSC_DOWNWARD << T22_PHYREG31_SSC_DIR_SHIFT; > + val |= T22_PHYREG31_SSC_OFFSET_500PPM << T22_PHYREG31_SSC_OFFSET_SHIFT; > + writel(val, priv->mmio + RK3568_T22_PHYREG31); > + } > + break; > + default: > + dev_err(priv->dev, "unsupported rate: %lu\n", rate); > + return -EINVAL; > + } > + > + if (priv->ext_refclk) { > + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); > + if (priv->mode == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { > + val = readl(priv->mmio + RK3568_T22_PHYREG12); > + val &= ~T22_PHYREG12_RESISTER_MASK; > + val |= T22_PHYREG12_RESISTER_HIGH_Z << T22_PHYREG12_RESISTER_SHIFT; > + val |= T22_PHYREG12_CKRCV_AMP0; > + writel(val, priv->mmio + RK3568_T22_PHYREG12); > + > + val = readl(priv->mmio + RK3568_T22_PHYREG13); > + val |= T22_PHYREG13_CKRCV_AMP1; > + writel(val, priv->mmio + RK3568_T22_PHYREG13); > + } > + } > + > + if (priv->enable_ssc) { > + val = readl(priv->mmio + RK3568_T22_PHYREG7); > + val |= T22_PHYREG7_SSC_EN; > + writel(val, priv->mmio + RK3568_T22_PHYREG7); > + } > + > + return 0; > +} > + > +static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = { > + /* pipe-phy-grf */ > + .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, > + .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, > + .sgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x01 }, > + .qsgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x21 }, > + .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, > + .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, > + .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, > + .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 }, > + .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, > + .pipe_phymode_sel = { 0x0008, 1, 1, 0x00, 0x01 }, > + .pipe_rate_sel = { 0x0008, 2, 2, 0x00, 0x01 }, > + .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, > + .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, > + .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, > + .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, > + .pipe_sel_usb = { 0x000c, 14, 13, 0x00, 0x01 }, > + .pipe_sel_qsgmii = { 0x000c, 15, 13, 0x00, 0x07 }, > + .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, > + .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 }, > + .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 }, > + .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 }, > + .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, > + .con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0119 }, > + .con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0040 }, > + .con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c3 }, > + .con3_for_sata = { 0x000c, 15, 0, 0x00, 0x4407 }, > + /* pipe-grf */ > + .pipe_con0_for_sata = { 0x0000, 15, 0, 0x00, 0x2220 }, > + .pipe_sgmii_mac_sel = { 0x0040, 1, 1, 0x00, 0x01 }, > + .pipe_xpcs_phy_ready = { 0x0040, 2, 2, 0x00, 0x01 }, > + .u3otg0_port_en = { 0x0104, 15, 0, 0x0181, 0x1100 }, > + .u3otg1_port_en = { 0x0144, 15, 0, 0x0181, 0x1100 }, > +}; > + > +static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = { > + .grfcfg = &rk3568_combphy_grfcfgs, > + .combphy_cfg = rk3568_combphy_cfg, > +}; > + > +static const struct of_device_id rockchip_combphy_of_match[] = { > + { > + .compatible = "rockchip,rk3568-naneng-combphy", > + .data = &rk3568_combphy_cfgs, > + }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, rockchip_combphy_of_match); > + > +static struct platform_driver rockchip_combphy_driver = { > + .probe = rockchip_combphy_probe, > + .driver = { > + .name = "rockchip-naneng-combphy", > + .of_match_table = rockchip_combphy_of_match, > + }, > +}; > +module_platform_driver(rockchip_combphy_driver); > + > +MODULE_DESCRIPTION("Rockchip NANENG COMBPHY driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.20.1
Hi Johan， >Hi Yifeng, > >Some comments...Have a look if it is useful. > >The key question is: does this RFC serie work? >Is someone able to give a test report? > >Could you produce a version 5 serie? >- Include lee.jones@linaro.org for MFD syscon. > Add "Acked by" to patch: > dt-bindings: mfd: syscon: add naneng combo phy register compatible > >- Change description for rockchip,enable-ssc for PCIE, SATA and USB in >patch: > dt-bindings: phy: rockchip: Add Naneng combo PHY bindings > > Add change log for rob+dt for a new review that explains why his > "Reviewed by" tag was not added. > >- If you like include some change suggestions from version 4. > >On 12/8/21 7:54 PM, Johan Jonker wrote: >> From: Yifeng Zhao <yifeng.zhao@rock-chips.com> >> >> This patch implements a combo phy driver for Rockchip SoCs >> with NaNeng IP block. This phy can be used as pcie-phy, usb3-phy, >> sata-phy or sgmii-phy. > >From Rockchip RK3568 Datasheet V1.0-20201210.pdf page 16-17: > >Multi-PHY0 support one of the following interfaces >USB3.0 OTG >SATA0 > >Multi-PHY1 support one of the following interfaces >USB3.0 Host >SATA1 >QSGMII/SGMII > >Multi-PHY2 support one of the following interfaces >PCIe2.1 >SATA2 >QSGMII/SGMII > >=== > >This driver or documentation never mentions the phy combinations that >are possible and with which DT properties. Any suggestions? > >=== >Missing gmac SGMII support? > >ethernet: stmicro: stmmac: Add SGMII/QSGMII support for RK3568 >https://github.com/rockchip-linux/kernel/commit/1fc7cbfe9e227c700c692f1de3137914b3ea6ca6 > >net: stmmac: dwmac-rk: Set XPCS port1 speed for GMAC1 SGMII mode >https://github.com/rockchip-linux/kernel/commit/0b1548f20254539c4fcc24f79a50581dfe164cc3 > >=== >It looks like SGMII connects both to phy1 and phy2 ?? >How to do that in DT ?? Any example/suggestions ?? > > gmac0: ethernet@fe2a0000 { >???? PHY_TYPE_SGMII > } > > gmac1: ethernet@fe010000 { >???? PHY_TYPE_SGMII > } I don't know about that. It will be processed when the person in charge of the module upstrem the code. > > sata0: sata@fc000000 { > phys = <&combphy0 PHY_TYPE_SATA>; > phy-names = "sata-phy"; > } > sata1: sata@fc400000 { > phys = <&combphy1 PHY_TYPE_SATA>; > phy-names = "sata-phy"; > } > sata2: sata@fc800000 { > phys = <&combphy2 PHY_TYPE_SATA>; > phy-names = "sata-phy"; > } > usbdrd3_0: usb@fcc00000 { > phys = <&u2phy0_otg>, <&combphy0 PHY_TYPE_USB3>; > phy-names = "usb2-phy", "usb3-phy"; > } > usbdrd3_1: usb@fd000000 { > phys = <&u2phy0_host>, <&combphy1 PHY_TYPE_USB3>; > phy-names = "usb2-phy", "usb3-phy"; > } > pcie2x1: pcie@fe260000 { > phys = <&combphy2 PHY_TYPE_PCIE>; > phy-names = "pcie-phy"; > } > >> >> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> >> Signed-off-by: Johan Jonker <jbx6244@gmail.com> >> --- >> >> TEST COMPILED ONLY! >> Driver not verified with hardware! >> --- >> >> Changed V4: >> restyle >> add devm_reset_control_array_get() >> remove clk structure >> change refclk DT parse >> change dev_err message >> add dot to phrase >> add ext_refclk variable >> add enable_ssc variable >> rename rockchip_combphy_param_write >> remove param_read >> replace rockchip-naneng-combphy driver name >> --- >> drivers/phy/rockchip/Kconfig | 8 + >> drivers/phy/rockchip/Makefile | 1 + >> .../rockchip/phy-rockchip-naneng-combphy.c | 608 ++++++++++++++++++ >> 3 files changed, 617 insertions(+) >> create mode 100644 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c >> >> diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig >> index e812adad7..9022e395c 100644 >> --- a/drivers/phy/rockchip/Kconfig >> +++ b/drivers/phy/rockchip/Kconfig >> @@ -66,6 +66,14 @@ config PHY_ROCKCHIP_INNO_DSIDPHY >> Enable this to support the Rockchip MIPI/LVDS/TTL PHY with >> Innosilicon IP block. >> >> +config PHY_ROCKCHIP_NANENG_COMBO_PHY >> + tristate "Rockchip NANENG COMBO PHY Driver" >> + depends on ARCH_ROCKCHIP && OF >> + select GENERIC_PHY >> + help >> + Enable this to support the Rockchip PCIe/USB3.0/SATA/QSGMII >> + combo PHY with NaNeng IP block. >> + >> config PHY_ROCKCHIP_PCIE >> tristate "Rockchip PCIe PHY Driver" >> depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST >> diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile >> index f0eec212b..a5041efb5 100644 >> --- a/drivers/phy/rockchip/Makefile >> +++ b/drivers/phy/rockchip/Makefile >> @@ -6,6 +6,7 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY) += phy-rockchip-inno-csidphy.o >> obj-$(CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY) += phy-rockchip-inno-dsidphy.o >> obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI) += phy-rockchip-inno-hdmi.o >> obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o >> +obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY) += phy-rockchip-naneng-combphy.o >> obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o >> obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o >> obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o >> diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c >> new file mode 100644 >> index 000000000..56aaeed62 >> --- /dev/null >> +++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c >> @@ -0,0 +1,608 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Rockchip PIPE USB3.0 PCIE SATA combphy driver >> + * >> + * Copyright (C) 2021 Rockchip Electronics Co., Ltd. >> + */ >> + >> +#include <linux/clk.h> >> +#include <linux/delay.h> >> +#include <linux/io.h> >> +#include <linux/iopoll.h> >> +#include <linux/kernel.h> >> +#include <linux/mfd/syscon.h> >> +#include <linux/module.h> >> +#include <linux/of_device.h> >> +#include <linux/phy/phy.h> >> +#include <linux/regmap.h> >> +#include <linux/reset.h> >> +#include <dt-bindings/phy/phy.h> >> + >> +#define BIT_WRITEABLE_SHIFT 16 >> +#define REF_CLOCK_24MHz 24000000 >> +#define REF_CLOCK_25MHz 25000000 >> +#define REF_CLOCK_100MHz 100000000 >> +/* RK3568 T22 COMBO PHY REG */ >> +#define RK3568_T22_PHYREG5 0x14 >> +#define T22_PHYREG5_PLL_DIV_MASK GENMASK(7, 6) >> +#define T22_PHYREG5_PLL_DIV_SHIFT 6 >> +#define T22_PHYREG5_PLL_DIV_2 1 >> + >> +#define RK3568_T22_PHYREG6 0x18 >> +#define T22_PHYREG6_TX_RTERM_MASK GENMASK(7, 4) >> +#define T22_PHYREG6_TX_RTERM_SHIFT 4 >> +#define T22_PHYREG6_TX_RTERM_50OHM 0x8 >> +#define T22_PHYREG6_RX_RTERM_MASK GENMASK(3, 0) >> +#define T22_PHYREG6_RX_RTERM_SHIFT 0 >> +#define T22_PHYREG6_RX_RTERM_44OHM 0xF >> + >> +#define RK3568_T22_PHYREG7 0x1C >> +#define T22_PHYREG7_SSC_EN BIT(4) >> + >> +#define RK3568_T22_PHYREG10 0x28 >> +#define T22_PHYREG10_SU_TRIM_0_7 0xF0 >> + >> +#define RK3568_T22_PHYREG11 0x2C >> +#define T22_PHYREG11_PLL_LPF_ADJ 0x4 >> + >> +#define RK3568_T22_PHYREG12 0x30 >> +#define T22_PHYREG12_RESISTER_MASK GENMASK(5, 4) >> +#define T22_PHYREG12_RESISTER_SHIFT 0x4 >> +#define T22_PHYREG12_RESISTER_HIGH_Z 0x3 >> +#define T22_PHYREG12_CKRCV_AMP0 BIT(7) >> + >> +#define RK3568_T22_PHYREG13 0x34 >> +#define T22_PHYREG13_CKRCV_AMP1 BIT(0) >> + >> +#define RK3568_T22_PHYREG14 0x38 >> +#define T22_PHYREG14_CTLE_EN BIT(0) >> +#define T22_PHYREG14_SSC_CNT_MASK GENMASK(7, 6) >> +#define T22_PHYREG14_SSC_CNT_SHIFT 6 >> +#define T22_PHYREG14_SSC_CNT_VALUE 0x1 >> + >> +#define RK3568_T22_PHYREG15 0x3C >> +#define T22_PHYREG15_SSC_CNT_VALUE 0x5f >> + >> +#define RK3568_T22_PHYREG17 0x44 >> +#define T22_PHYREG17_PLL_LOOP 0x32 >> + > >> +#define RK3568_T22_PHYREG31 0x7C >> +#define T22_PHYREG31_SSC_MASK GENMASK(7, 4) >> +#define T22_PHYREG31_SSC_DIR_SHIFT 4 >> +#define T22_PHYREG31_SSC_UPWARD 0 >> +#define T22_PHYREG31_SSC_DOWNWARD 1 >> +#define T22_PHYREG31_SSC_OFFSET_SHIFT 6 >> +#define T22_PHYREG31_SSC_OFFSET_500PPM 1 > >Where in the TRM can I find this reg description? >Can't find matching bits??? > >Rockchip RK3568 TRM Part2 V1.0-20210111.pdf >page 1965 ??? > >Multi-PHY_Register032 >Address: Operational Base + offset (0x007C) > >RES[7:0] >[0]: bypass the mode of pd_ck100m controlling CKDRV >1'b0: CKDRV is on only in PCIE mode >1'b1: CKDRV is controlled by ckref_src[1:0]; >[1]: select signal of pll_lock to TX/RX >1'b0: pll_lock is controlled by rate[1:0] >1'b1: pll_lock is not controlled by rate[1:0] >[2]: bypass the mode of rate[1:0] controlling pll_lock_pcs >1'b0: pll_lock_pcs is controlled by rate[1:0] >1'b1: pll_lock_pcs is not controlled by rate[1:0] >[7:3]: Reserved The IP document has been updated with new information as follows: [3]: 50ohm termination disable signal in CKREP/N TX mode, 0: not disable, 1: disable mode [5:4]: select signal of SSC derection: 00: upward spread spectrum; 01: downward spread spectrum, 10: no spread spectrum, 11: illegal [7:6]: SSC offset compensation. 00: 0ppm; 01: +500ppm; 10/11: -500ppm >> + >> +#define RK3568_T22_PHYREG32 0x80 >> +#define T22_PHYREG32_PLL_KVCO_MASK GENMASK(4, 2) >> +#define T22_PHYREG32_PLL_KVCO_SHIFT 2 >> +#define T22_PHYREG32_PLL_KVCO_VALUE 2 >> + >> +struct rockchip_combphy_priv; >> + >> +struct combphy_reg { >> + u16 offset; >> + u16 bitend; >> + u16 bitstart; >> + u16 disable; >> + u16 enable; >> +}; >> + >> +struct rockchip_combphy_grfcfg { >> + struct combphy_reg pcie_mode_set; >> + struct combphy_reg usb_mode_set; >> + struct combphy_reg sgmii_mode_set; >> + struct combphy_reg qsgmii_mode_set; >> + struct combphy_reg pipe_rxterm_set; >> + struct combphy_reg pipe_txelec_set; >> + struct combphy_reg pipe_txcomp_set; >> + struct combphy_reg pipe_clk_25m; >> + struct combphy_reg pipe_clk_100m; >> + struct combphy_reg pipe_phymode_sel; >> + struct combphy_reg pipe_rate_sel; >> + struct combphy_reg pipe_rxterm_sel; >> + struct combphy_reg pipe_txelec_sel; >> + struct combphy_reg pipe_txcomp_sel; >> + struct combphy_reg pipe_clk_ext; >> + struct combphy_reg pipe_sel_usb; >> + struct combphy_reg pipe_sel_qsgmii; >> + struct combphy_reg pipe_phy_status; >> + struct combphy_reg con0_for_pcie; >> + struct combphy_reg con1_for_pcie; >> + struct combphy_reg con2_for_pcie; >> + struct combphy_reg con3_for_pcie; >> + struct combphy_reg con0_for_sata; >> + struct combphy_reg con1_for_sata; >> + struct combphy_reg con2_for_sata; >> + struct combphy_reg con3_for_sata; >> + struct combphy_reg pipe_con0_for_sata; >> + struct combphy_reg pipe_sgmii_mac_sel; >> + struct combphy_reg pipe_xpcs_phy_ready; >> + struct combphy_reg u3otg0_port_en; >> + struct combphy_reg u3otg1_port_en; >> +}; >> + >> +struct rockchip_combphy_cfg { >> + const struct rockchip_combphy_grfcfg *grfcfg; >> + int (*combphy_cfg)(struct rockchip_combphy_priv *priv); >> +}; >> + >> +struct rockchip_combphy_priv { >> + u8 mode; >> + void __iomem *mmio; >> + int num_clks; >> + struct clk_bulk_data *clks; >> + struct device *dev; >> + struct regmap *pipe_grf; >> + struct regmap *phy_grf; >> + struct phy *phy; >> + struct reset_control *phy_rst; >> + const struct rockchip_combphy_cfg *cfg; >> + bool enable_ssc; >> + bool ext_refclk; >> + struct clk *refclk; >> +}; >> + >> +static int rockchip_combphy_param_write(struct regmap *base, >> + const struct combphy_reg *reg, bool en) >> +{ >> + u32 val, mask, tmp; >> + >> + tmp = en ? reg->enable : reg->disable; >> + mask = GENMASK(reg->bitend, reg->bitstart); >> + val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT); >> + >> + return regmap_write(base, reg->offset, val); >> +} >> + >> +static u32 rockchip_combphy_is_ready(struct rockchip_combphy_priv *priv) >> +{ >> + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; >> + u32 mask, val; >> + >> + mask = GENMASK(cfg->pipe_phy_status.bitend, >> + cfg->pipe_phy_status.bitstart); >> + >> + regmap_read(priv->phy_grf, cfg->pipe_phy_status.offset, &val); >> + val = (val & mask) >> cfg->pipe_phy_status.bitstart; >> + >> + return val; >> +} >> + >> +static int rockchip_combphy_set_mode(struct rockchip_combphy_priv *priv) >> +{ >> + int ret = 0; >> + >> + switch (priv->mode) { >> + case PHY_TYPE_PCIE: >> + case PHY_TYPE_USB3: >> + case PHY_TYPE_SATA: >> + case PHY_TYPE_SGMII: >> + case PHY_TYPE_QSGMII: >> + if (priv->cfg->combphy_cfg) >> + ret = priv->cfg->combphy_cfg(priv); >> + break; >> + default: >> + dev_err(priv->dev, "incompatible PHY type\n"); >> + return -EINVAL; >> + } >> + >> + if (ret) >> + dev_err(priv->dev, "failed to init phy for phy mode %x\n", priv->mode); >> + >> + return ret; >> +} >> + >> +static int rockchip_combphy_init(struct phy *phy) >> +{ >> + struct rockchip_combphy_priv *priv = phy_get_drvdata(phy); >> + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; >> + u32 val; >> + int ret; >> + >> + ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks); >> + if (ret) { >> + dev_err(priv->dev, "failed to enable clks\n"); >> + return ret; >> + } >> + >> + ret = rockchip_combphy_set_mode(priv); >> + if (ret) >> + goto err_clk; >> + >> + ret = reset_control_deassert(priv->phy_rst); >> + if (ret) >> + goto err_clk; >> + >> + if (priv->mode == PHY_TYPE_USB3) { >> + ret = readx_poll_timeout_atomic(rockchip_combphy_is_ready, >> + priv, val, >> + val == cfg->pipe_phy_status.enable, >> + 10, 1000); >> + if (ret) >> + dev_warn(priv->dev, "wait phy status ready timeout\n"); >> + } >> + >> + return 0; >> + >> +err_clk: >> + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); >> + >> + return ret; >> +} >> + >> +static int rockchip_combphy_exit(struct phy *phy) >> +{ >> + struct rockchip_combphy_priv *priv = phy_get_drvdata(phy); >> + >> + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); >> + reset_control_assert(priv->phy_rst); >> + >> + return 0; >> +} >> + >> +static const struct phy_ops rochchip_combphy_ops = { >> + .init = rockchip_combphy_init, >> + .exit = rockchip_combphy_exit, >> + .owner = THIS_MODULE, >> +}; >> + >> +static struct phy *rockchip_combphy_xlate(struct device *dev, struct of_phandle_args *args) >> +{ >> + struct rockchip_combphy_priv *priv = dev_get_drvdata(dev); >> + >> + if (args->args_count != 1) { >> + dev_err(dev, "invalid number of arguments\n"); >> + return ERR_PTR(-EINVAL); >> + } >> + >> + if (priv->mode != PHY_NONE && priv->mode != args->args[0]) >> + dev_warn(dev, "phy type select %d overwriting type %d\n", >> + args->args[0], priv->mode); >> + >> + priv->mode = args->args[0]; >> + >> + return priv->phy; >> +} >> + >> +static int rockchip_combphy_parse_dt(struct device *dev, struct rockchip_combphy_priv *priv) >> +{ >> + const struct rockchip_combphy_cfg *phy_cfg = priv->cfg; >> + int mac_id; >> + int i; >> + >> + priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks); >> + if (priv->num_clks < 1) >> + return -EINVAL; >> + >> + priv->refclk = NULL; >> + for (i = 0; i < priv->num_clks; i++) { >> + if (!strncmp(priv->clks[i].id, "ref", 3)) { >> + priv->refclk = priv->clks[i].clk; >> + break; >> + } >> + } >> + >> + if (!priv->refclk) { >> + dev_err(dev, "no refclk found\n"); >> + return -EINVAL; >> + } >> + >> + priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-grf"); >> + if (IS_ERR(priv->pipe_grf)) { >> + dev_err(dev, "failed to find peri_ctrl pipe-grf regmap\n"); >> + return PTR_ERR(priv->pipe_grf); >> + } >> + >> + priv->phy_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-phy-grf"); >> + if (IS_ERR(priv->phy_grf)) { >> + dev_err(dev, "failed to find peri_ctrl pipe-phy-grf regmap\n"); >> + return PTR_ERR(priv->phy_grf); >> + } >> + > >> + if (device_property_present(dev, "rockchip,dis-u3otg0-port")) >> + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->u3otg0_port_en, >> + false); >> + >> + if (device_property_present(dev, "rockchip,dis-u3otg1-port")) >> + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->u3otg1_port_en, >> + false); >> + >> + priv->enable_ssc = device_property_present(dev, "rockchip,enable-ssc"); >> + >> + priv->ext_refclk = device_property_present(dev, "rockchip,ext-refclk"); >> + >> + if (!device_property_read_u32(dev, "rockchip,sgmii-mac-sel", &mac_id) && >> + (mac_id > 0)) >> + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->pipe_sgmii_mac_sel, >> + true); >> + else >> + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->pipe_sgmii_mac_sel, >> + false); > >When a module is reloaded or when bits are previously set by u-boot it >doesn't garantee that they are in default state, does it? >Maybe always set them regardless if the property is present to default >or a value. > >val = condition ? true : false; > >rockchip_combphy_param_write(priv->pipe_grf, >&phy_cfg->grfcfg->pipe_sgmii_mac_sel, >val); > >>> +>> + priv->phy_rst = devm_reset_control_array_get(dev, false, false); > >Does this work? Yes, this code can work, but it also reset apb_reset together, which will affect the configuration of some registers. I reomve apb_reset that does not need to be used in DTS to fix it. >> + if (IS_ERR(priv->phy_rst))>> + return dev_err_probe(dev, PTR_ERR(priv->phy_rst), "failed to get phy reset\n");>> +>> + return 0;>> +}>> +>> +static int rockchip_combphy_probe(struct platform_device *pdev)>> +{>> + struct phy_provider *phy_provider;>> + struct device *dev = &pdev->dev;>> + struct rockchip_combphy_priv *priv;>> + const struct rockchip_combphy_cfg *phy_cfg;>> + struct resource *res;>> + int ret;>> +>> + phy_cfg = of_device_get_match_data(dev);>> + if (!phy_cfg) { >> + dev_err(dev, "no OF match data provided\n"); >> + return -EINVAL; >> + } >> + >> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); >> + if (!priv) >> + return -ENOMEM; >> + >> + priv->mmio = devm_platform_get_and_ioremap_resource(pdev, 0, &res); >> + if (IS_ERR(priv->mmio)) { >> + ret = PTR_ERR(priv->mmio); >> + return ret; >> + } >> + >> + priv->dev = dev; >> + priv->mode = PHY_NONE; >> + priv->cfg = phy_cfg; >> + >> + ret = rockchip_combphy_parse_dt(dev, priv); >> + if (ret) >> + return ret; >> + >> + ret = reset_control_assert(priv->phy_rst); >> + if (ret) { >> + dev_err(dev, "failed to reset phy\n"); >> + return ret; >> + } >> + >> + priv->phy = devm_phy_create(dev, NULL, &rochchip_combphy_ops); >> + if (IS_ERR(priv->phy)) { >> + dev_err(dev, "failed to create combphy\n"); >> + return PTR_ERR(priv->phy); >> + } >> + >> + dev_set_drvdata(dev, priv); >> + phy_set_drvdata(priv->phy, priv); >> + >> + phy_provider = devm_of_phy_provider_register(dev, rockchip_combphy_xlate); >> + >> + return PTR_ERR_OR_ZERO(phy_provider); >> +} >> + >> +static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv) >> +{ >> + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; >> + unsigned long rate; >> + u32 val; >> + >> + switch (priv->mode) { >> + case PHY_TYPE_PCIE: >> + /* Set SSC downward spread spectrum. */ >> + val = readl(priv->mmio + RK3568_T22_PHYREG31); >> + val &= ~T22_PHYREG31_SSC_MASK; >> + val |= T22_PHYREG31_SSC_DOWNWARD << T22_PHYREG31_SSC_DIR_SHIFT; >> + writel(val, priv->mmio + RK3568_T22_PHYREG31); >> + >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true); >> + break; >> + case PHY_TYPE_USB3: >> + /* Set SSC downward spread spectrum. */ >> + val = readl(priv->mmio + RK3568_T22_PHYREG31); >> + val &= ~T22_PHYREG31_SSC_MASK; >> + val |= T22_PHYREG31_SSC_DOWNWARD << T22_PHYREG31_SSC_DIR_SHIFT; >> + writel(val, priv->mmio + RK3568_T22_PHYREG31); >> + >> + /* Enable adaptive CTLE for USB3.0 Rx. */ >> + val = readl(priv->mmio + RK3568_T22_PHYREG14); >> + val |= T22_PHYREG14_CTLE_EN; >> + writel(val, priv->mmio + RK3568_T22_PHYREG14); >> + >> + /* Set PLL KVCO fine tuning signals. */ >> + val = readl(priv->mmio + RK3568_T22_PHYREG32); >> + val &= ~T22_PHYREG32_PLL_KVCO_MASK; >> + val |= T22_PHYREG32_PLL_KVCO_VALUE << T22_PHYREG32_PLL_KVCO_SHIFT; >> + writel(val, priv->mmio + RK3568_T22_PHYREG32); >> + >> + /* Enable controlling random jitter. */ >> + writel(T22_PHYREG11_PLL_LPF_ADJ, priv->mmio + RK3568_T22_PHYREG11); >> + >> + /* Set PLL input clock divider 1/2. */ >> + val = readl(priv->mmio + RK3568_T22_PHYREG5); >> + val &= ~T22_PHYREG5_PLL_DIV_MASK; >> + val |= T22_PHYREG5_PLL_DIV_2 << T22_PHYREG5_PLL_DIV_SHIFT; >> + writel(val, priv->mmio + RK3568_T22_PHYREG5); >> + >> + writel(T22_PHYREG17_PLL_LOOP, priv->mmio + RK3568_T22_PHYREG17); >> + writel(T22_PHYREG10_SU_TRIM_0_7, priv->mmio + RK3568_T22_PHYREG10); >> + >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_usb, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true); >> + break; >> + case PHY_TYPE_SATA: >> + /* Enable adaptive CTLE for SATA Rx. */ >> + val = readl(priv->mmio + RK3568_T22_PHYREG14); >> + val |= T22_PHYREG14_CTLE_EN; >> + writel(val, priv->mmio + RK3568_T22_PHYREG14); >> + /* >> + * Set tx_rterm=50ohm and rx_rterm=44ohm for SATA. >> + * 0: 60ohm, 8: 50ohm 15: 44ohm (by step abort 1ohm) >> + */ >> + val = T22_PHYREG6_TX_RTERM_50OHM << T22_PHYREG6_TX_RTERM_SHIFT; >> + val |= T22_PHYREG6_RX_RTERM_44OHM << T22_PHYREG6_RX_RTERM_SHIFT; >> + writel(val, priv->mmio + RK3568_T22_PHYREG6); >> + >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true); >> + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true); >> + break; >> + case PHY_TYPE_SGMII: >> + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->sgmii_mode_set, true); >> + break; >> + case PHY_TYPE_QSGMII: >> + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_rate_sel, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true); >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->qsgmii_mode_set, true); >> + break; >> + default: >> + dev_err(priv->dev, "incompatible PHY type\n"); >> + return -EINVAL; >> + } >> + >> + rate = clk_get_rate(priv->refclk); >> + >> + switch (rate) { >> + case REF_CLOCK_24MHz: >> + if (priv->mode == PHY_TYPE_USB3 || priv->mode == PHY_TYPE_SATA) { >> + /* Set ssc_cnt[9:0]=0101111101 & 31.5KHz. */ >> + val = readl(priv->mmio + RK3568_T22_PHYREG14); >> + val &= ~T22_PHYREG14_SSC_CNT_MASK; >> + val |= T22_PHYREG14_SSC_CNT_VALUE << T22_PHYREG14_SSC_CNT_SHIFT; >> + writel(val, priv->mmio + RK3568_T22_PHYREG14); >> + writel(T22_PHYREG15_SSC_CNT_VALUE, priv->mmio + RK3568_T22_PHYREG15); >> + } >> + break; >> + case REF_CLOCK_25MHz: >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); >> + break; >> + case REF_CLOCK_100MHz: >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); >> + if (priv->mode == PHY_TYPE_PCIE) { >> + /* PLL KVCO fine tuning. */ >> + val = readl(priv->mmio + RK3568_T22_PHYREG32); >> + val &= ~T22_PHYREG32_PLL_KVCO_MASK; >> + val |= T22_PHYREG32_PLL_KVCO_VALUE << T22_PHYREG32_PLL_KVCO_SHIFT; >> + writel(val, priv->mmio + RK3568_T22_PHYREG32); >> + >> + /* Enable controlling random jitter. */ >> + writel(T22_PHYREG11_PLL_LPF_ADJ, priv->mmio + RK3568_T22_PHYREG11); >> + >> + val = readl(priv->mmio + RK3568_T22_PHYREG5); >> + val &= ~T22_PHYREG5_PLL_DIV_MASK; >> + val |= T22_PHYREG5_PLL_DIV_2 << T22_PHYREG5_PLL_DIV_SHIFT; >> + writel(val, priv->mmio + RK3568_T22_PHYREG5); >> + >> + writel(T22_PHYREG17_PLL_LOOP, priv->mmio + RK3568_T22_PHYREG17); >> + writel(T22_PHYREG10_SU_TRIM_0_7, priv->mmio + RK3568_T22_PHYREG10); >> + } else if (priv->mode == PHY_TYPE_SATA) { >> + /* downward spread spectrum +500ppm */ >> + val = readl(priv->mmio + RK3568_T22_PHYREG31); >> + val &= ~T22_PHYREG31_SSC_MASK; >> + val |= T22_PHYREG31_SSC_DOWNWARD << T22_PHYREG31_SSC_DIR_SHIFT; >> + val |= T22_PHYREG31_SSC_OFFSET_500PPM << T22_PHYREG31_SSC_OFFSET_SHIFT; >> + writel(val, priv->mmio + RK3568_T22_PHYREG31); >> + } >> + break; >> + default: >> + dev_err(priv->dev, "unsupported rate: %lu\n", rate); >> + return -EINVAL; >> + } >> + >> + if (priv->ext_refclk) { >> + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); >> + if (priv->mode == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { >> + val = readl(priv->mmio + RK3568_T22_PHYREG12); >> + val &= ~T22_PHYREG12_RESISTER_MASK; >> + val |= T22_PHYREG12_RESISTER_HIGH_Z << T22_PHYREG12_RESISTER_SHIFT; >> + val |= T22_PHYREG12_CKRCV_AMP0; >> + writel(val, priv->mmio + RK3568_T22_PHYREG12); >> + >> + val = readl(priv->mmio + RK3568_T22_PHYREG13); >> + val |= T22_PHYREG13_CKRCV_AMP1; >> + writel(val, priv->mmio + RK3568_T22_PHYREG13); >> + } >> + } >> + >> + if (priv->enable_ssc) { >> + val = readl(priv->mmio + RK3568_T22_PHYREG7); >> + val |= T22_PHYREG7_SSC_EN; >> + writel(val, priv->mmio + RK3568_T22_PHYREG7); >> + } >> + >> + return 0; >> +} >> + >> +static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = { >> + /* pipe-phy-grf */ >> + .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, >> + .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, >> + .sgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x01 }, >> + .qsgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x21 }, >> + .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, >> + .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, >> + .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, >> + .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 }, >> + .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, >> + .pipe_phymode_sel = { 0x0008, 1, 1, 0x00, 0x01 }, >> + .pipe_rate_sel = { 0x0008, 2, 2, 0x00, 0x01 }, >> + .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, >> + .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, >> + .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, >> + .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, >> + .pipe_sel_usb = { 0x000c, 14, 13, 0x00, 0x01 }, >> + .pipe_sel_qsgmii = { 0x000c, 15, 13, 0x00, 0x07 }, >> + .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, >> + .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 }, >> + .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 }, >> + .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 }, >> + .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, >> + .con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0119 }, >> + .con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0040 }, >> + .con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c3 }, >> + .con3_for_sata = { 0x000c, 15, 0, 0x00, 0x4407 }, >> + /* pipe-grf */ >> + .pipe_con0_for_sata = { 0x0000, 15, 0, 0x00, 0x2220 }, >> + .pipe_sgmii_mac_sel = { 0x0040, 1, 1, 0x00, 0x01 }, >> + .pipe_xpcs_phy_ready = { 0x0040, 2, 2, 0x00, 0x01 }, >> + .u3otg0_port_en = { 0x0104, 15, 0, 0x0181, 0x1100 }, >> + .u3otg1_port_en = { 0x0144, 15, 0, 0x0181, 0x1100 }, >> +}; >> + >> +static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = { >> + .grfcfg = &rk3568_combphy_grfcfgs, >> + .combphy_cfg = rk3568_combphy_cfg, >> +}; >> + >> +static const struct of_device_id rockchip_combphy_of_match[] = { >> + { >> + .compatible = "rockchip,rk3568-naneng-combphy", >> + .data = &rk3568_combphy_cfgs, >> + }, >> + { }, >> +}; >> +MODULE_DEVICE_TABLE(of, rockchip_combphy_of_match); >> + >> +static struct platform_driver rockchip_combphy_driver = { >> + .probe = rockchip_combphy_probe, >> + .driver = { >> + .name = "rockchip-naneng-combphy", >> + .of_match_table = rockchip_combphy_of_match, >> + }, >> +}; >> +module_platform_driver(rockchip_combphy_driver); >> + >> +MODULE_DESCRIPTION("Rockchip NANENG COMBPHY driver"); >> +MODULE_LICENSE("GPL v2"); >>
diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig index e812adad7..9022e395c 100644 --- a/drivers/phy/rockchip/Kconfig +++ b/drivers/phy/rockchip/Kconfig @@ -66,6 +66,14 @@ config PHY_ROCKCHIP_INNO_DSIDPHY Enable this to support the Rockchip MIPI/LVDS/TTL PHY with Innosilicon IP block. +config PHY_ROCKCHIP_NANENG_COMBO_PHY + tristate "Rockchip NANENG COMBO PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip PCIe/USB3.0/SATA/QSGMII + combo PHY with NaNeng IP block. + config PHY_ROCKCHIP_PCIE tristate "Rockchip PCIe PHY Driver" depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile index f0eec212b..a5041efb5 100644 --- a/drivers/phy/rockchip/Makefile +++ b/drivers/phy/rockchip/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY) += phy-rockchip-inno-csidphy.o obj-$(CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY) += phy-rockchip-inno-dsidphy.o obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI) += phy-rockchip-inno-hdmi.o obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o +obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY) += phy-rockchip-naneng-combphy.o obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c new file mode 100644 index 000000000..56aaeed62 --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c @@ -0,0 +1,608 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Rockchip PIPE USB3.0 PCIE SATA combphy driver + * + * Copyright (C) 2021 Rockchip Electronics Co., Ltd. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <dt-bindings/phy/phy.h> + +#define BIT_WRITEABLE_SHIFT 16 +#define REF_CLOCK_24MHz 24000000 +#define REF_CLOCK_25MHz 25000000 +#define REF_CLOCK_100MHz 100000000 +/* RK3568 T22 COMBO PHY REG */ +#define RK3568_T22_PHYREG5 0x14 +#define T22_PHYREG5_PLL_DIV_MASK GENMASK(7, 6) +#define T22_PHYREG5_PLL_DIV_SHIFT 6 +#define T22_PHYREG5_PLL_DIV_2 1 + +#define RK3568_T22_PHYREG6 0x18 +#define T22_PHYREG6_TX_RTERM_MASK GENMASK(7, 4) +#define T22_PHYREG6_TX_RTERM_SHIFT 4 +#define T22_PHYREG6_TX_RTERM_50OHM 0x8 +#define T22_PHYREG6_RX_RTERM_MASK GENMASK(3, 0) +#define T22_PHYREG6_RX_RTERM_SHIFT 0 +#define T22_PHYREG6_RX_RTERM_44OHM 0xF + +#define RK3568_T22_PHYREG7 0x1C +#define T22_PHYREG7_SSC_EN BIT(4) + +#define RK3568_T22_PHYREG10 0x28 +#define T22_PHYREG10_SU_TRIM_0_7 0xF0 + +#define RK3568_T22_PHYREG11 0x2C +#define T22_PHYREG11_PLL_LPF_ADJ 0x4 + +#define RK3568_T22_PHYREG12 0x30 +#define T22_PHYREG12_RESISTER_MASK GENMASK(5, 4) +#define T22_PHYREG12_RESISTER_SHIFT 0x4 +#define T22_PHYREG12_RESISTER_HIGH_Z 0x3 +#define T22_PHYREG12_CKRCV_AMP0 BIT(7) + +#define RK3568_T22_PHYREG13 0x34 +#define T22_PHYREG13_CKRCV_AMP1 BIT(0) + +#define RK3568_T22_PHYREG14 0x38 +#define T22_PHYREG14_CTLE_EN BIT(0) +#define T22_PHYREG14_SSC_CNT_MASK GENMASK(7, 6) +#define T22_PHYREG14_SSC_CNT_SHIFT 6 +#define T22_PHYREG14_SSC_CNT_VALUE 0x1 + +#define RK3568_T22_PHYREG15 0x3C +#define T22_PHYREG15_SSC_CNT_VALUE 0x5f + +#define RK3568_T22_PHYREG17 0x44 +#define T22_PHYREG17_PLL_LOOP 0x32 + +#define RK3568_T22_PHYREG31 0x7C +#define T22_PHYREG31_SSC_MASK GENMASK(7, 4) +#define T22_PHYREG31_SSC_DIR_SHIFT 4 +#define T22_PHYREG31_SSC_UPWARD 0 +#define T22_PHYREG31_SSC_DOWNWARD 1 +#define T22_PHYREG31_SSC_OFFSET_SHIFT 6 +#define T22_PHYREG31_SSC_OFFSET_500PPM 1 + +#define RK3568_T22_PHYREG32 0x80 +#define T22_PHYREG32_PLL_KVCO_MASK GENMASK(4, 2) +#define T22_PHYREG32_PLL_KVCO_SHIFT 2 +#define T22_PHYREG32_PLL_KVCO_VALUE 2 + +struct rockchip_combphy_priv; + +struct combphy_reg { + u16 offset; + u16 bitend; + u16 bitstart; + u16 disable; + u16 enable; +}; + +struct rockchip_combphy_grfcfg { + struct combphy_reg pcie_mode_set; + struct combphy_reg usb_mode_set; + struct combphy_reg sgmii_mode_set; + struct combphy_reg qsgmii_mode_set; + struct combphy_reg pipe_rxterm_set; + struct combphy_reg pipe_txelec_set; + struct combphy_reg pipe_txcomp_set; + struct combphy_reg pipe_clk_25m; + struct combphy_reg pipe_clk_100m; + struct combphy_reg pipe_phymode_sel; + struct combphy_reg pipe_rate_sel; + struct combphy_reg pipe_rxterm_sel; + struct combphy_reg pipe_txelec_sel; + struct combphy_reg pipe_txcomp_sel; + struct combphy_reg pipe_clk_ext; + struct combphy_reg pipe_sel_usb; + struct combphy_reg pipe_sel_qsgmii; + struct combphy_reg pipe_phy_status; + struct combphy_reg con0_for_pcie; + struct combphy_reg con1_for_pcie; + struct combphy_reg con2_for_pcie; + struct combphy_reg con3_for_pcie; + struct combphy_reg con0_for_sata; + struct combphy_reg con1_for_sata; + struct combphy_reg con2_for_sata; + struct combphy_reg con3_for_sata; + struct combphy_reg pipe_con0_for_sata; + struct combphy_reg pipe_sgmii_mac_sel; + struct combphy_reg pipe_xpcs_phy_ready; + struct combphy_reg u3otg0_port_en; + struct combphy_reg u3otg1_port_en; +}; + +struct rockchip_combphy_cfg { + const struct rockchip_combphy_grfcfg *grfcfg; + int (*combphy_cfg)(struct rockchip_combphy_priv *priv); +}; + +struct rockchip_combphy_priv { + u8 mode; + void __iomem *mmio; + int num_clks; + struct clk_bulk_data *clks; + struct device *dev; + struct regmap *pipe_grf; + struct regmap *phy_grf; + struct phy *phy; + struct reset_control *phy_rst; + const struct rockchip_combphy_cfg *cfg; + bool enable_ssc; + bool ext_refclk; + struct clk *refclk; +}; + +static int rockchip_combphy_param_write(struct regmap *base, + const struct combphy_reg *reg, bool en) +{ + u32 val, mask, tmp; + + tmp = en ? reg->enable : reg->disable; + mask = GENMASK(reg->bitend, reg->bitstart); + val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT); + + return regmap_write(base, reg->offset, val); +} + +static u32 rockchip_combphy_is_ready(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; + u32 mask, val; + + mask = GENMASK(cfg->pipe_phy_status.bitend, + cfg->pipe_phy_status.bitstart); + + regmap_read(priv->phy_grf, cfg->pipe_phy_status.offset, &val); + val = (val & mask) >> cfg->pipe_phy_status.bitstart; + + return val; +} + +static int rockchip_combphy_set_mode(struct rockchip_combphy_priv *priv) +{ + int ret = 0; + + switch (priv->mode) { + case PHY_TYPE_PCIE: + case PHY_TYPE_USB3: + case PHY_TYPE_SATA: + case PHY_TYPE_SGMII: + case PHY_TYPE_QSGMII: + if (priv->cfg->combphy_cfg) + ret = priv->cfg->combphy_cfg(priv); + break; + default: + dev_err(priv->dev, "incompatible PHY type\n"); + return -EINVAL; + } + + if (ret) + dev_err(priv->dev, "failed to init phy for phy mode %x\n", priv->mode); + + return ret; +} + +static int rockchip_combphy_init(struct phy *phy) +{ + struct rockchip_combphy_priv *priv = phy_get_drvdata(phy); + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; + u32 val; + int ret; + + ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks); + if (ret) { + dev_err(priv->dev, "failed to enable clks\n"); + return ret; + } + + ret = rockchip_combphy_set_mode(priv); + if (ret) + goto err_clk; + + ret = reset_control_deassert(priv->phy_rst); + if (ret) + goto err_clk; + + if (priv->mode == PHY_TYPE_USB3) { + ret = readx_poll_timeout_atomic(rockchip_combphy_is_ready, + priv, val, + val == cfg->pipe_phy_status.enable, + 10, 1000); + if (ret) + dev_warn(priv->dev, "wait phy status ready timeout\n"); + } + + return 0; + +err_clk: + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); + + return ret; +} + +static int rockchip_combphy_exit(struct phy *phy) +{ + struct rockchip_combphy_priv *priv = phy_get_drvdata(phy); + + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); + reset_control_assert(priv->phy_rst); + + return 0; +} + +static const struct phy_ops rochchip_combphy_ops = { + .init = rockchip_combphy_init, + .exit = rockchip_combphy_exit, + .owner = THIS_MODULE, +}; + +static struct phy *rockchip_combphy_xlate(struct device *dev, struct of_phandle_args *args) +{ + struct rockchip_combphy_priv *priv = dev_get_drvdata(dev); + + if (args->args_count != 1) { + dev_err(dev, "invalid number of arguments\n"); + return ERR_PTR(-EINVAL); + } + + if (priv->mode != PHY_NONE && priv->mode != args->args[0]) + dev_warn(dev, "phy type select %d overwriting type %d\n", + args->args[0], priv->mode); + + priv->mode = args->args[0]; + + return priv->phy; +} + +static int rockchip_combphy_parse_dt(struct device *dev, struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_cfg *phy_cfg = priv->cfg; + int mac_id; + int i; + + priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks); + if (priv->num_clks < 1) + return -EINVAL; + + priv->refclk = NULL; + for (i = 0; i < priv->num_clks; i++) { + if (!strncmp(priv->clks[i].id, "ref", 3)) { + priv->refclk = priv->clks[i].clk; + break; + } + } + + if (!priv->refclk) { + dev_err(dev, "no refclk found\n"); + return -EINVAL; + } + + priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-grf"); + if (IS_ERR(priv->pipe_grf)) { + dev_err(dev, "failed to find peri_ctrl pipe-grf regmap\n"); + return PTR_ERR(priv->pipe_grf); + } + + priv->phy_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-phy-grf"); + if (IS_ERR(priv->phy_grf)) { + dev_err(dev, "failed to find peri_ctrl pipe-phy-grf regmap\n"); + return PTR_ERR(priv->phy_grf); + } + + if (device_property_present(dev, "rockchip,dis-u3otg0-port")) + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->u3otg0_port_en, + false); + + if (device_property_present(dev, "rockchip,dis-u3otg1-port")) + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->u3otg1_port_en, + false); + + priv->enable_ssc = device_property_present(dev, "rockchip,enable-ssc"); + + priv->ext_refclk = device_property_present(dev, "rockchip,ext-refclk"); + + if (!device_property_read_u32(dev, "rockchip,sgmii-mac-sel", &mac_id) && + (mac_id > 0)) + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->pipe_sgmii_mac_sel, + true); + else + rockchip_combphy_param_write(priv->pipe_grf, &phy_cfg->grfcfg->pipe_sgmii_mac_sel, + false); + + priv->phy_rst = devm_reset_control_array_get(dev, false, false); + if (IS_ERR(priv->phy_rst)) + return dev_err_probe(dev, PTR_ERR(priv->phy_rst), "failed to get phy reset\n"); + + return 0; +} + +static int rockchip_combphy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct rockchip_combphy_priv *priv; + const struct rockchip_combphy_cfg *phy_cfg; + struct resource *res; + int ret; + + phy_cfg = of_device_get_match_data(dev); + if (!phy_cfg) { + dev_err(dev, "no OF match data provided\n"); + return -EINVAL; + } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->mmio = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(priv->mmio)) { + ret = PTR_ERR(priv->mmio); + return ret; + } + + priv->dev = dev; + priv->mode = PHY_NONE; + priv->cfg = phy_cfg; + + ret = rockchip_combphy_parse_dt(dev, priv); + if (ret) + return ret; + + ret = reset_control_assert(priv->phy_rst); + if (ret) { + dev_err(dev, "failed to reset phy\n"); + return ret; + } + + priv->phy = devm_phy_create(dev, NULL, &rochchip_combphy_ops); + if (IS_ERR(priv->phy)) { + dev_err(dev, "failed to create combphy\n"); + return PTR_ERR(priv->phy); + } + + dev_set_drvdata(dev, priv); + phy_set_drvdata(priv->phy, priv); + + phy_provider = devm_of_phy_provider_register(dev, rockchip_combphy_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg; + unsigned long rate; + u32 val; + + switch (priv->mode) { + case PHY_TYPE_PCIE: + /* Set SSC downward spread spectrum. */ + val = readl(priv->mmio + RK3568_T22_PHYREG31); + val &= ~T22_PHYREG31_SSC_MASK; + val |= T22_PHYREG31_SSC_DOWNWARD << T22_PHYREG31_SSC_DIR_SHIFT; + writel(val, priv->mmio + RK3568_T22_PHYREG31); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true); + break; + case PHY_TYPE_USB3: + /* Set SSC downward spread spectrum. */ + val = readl(priv->mmio + RK3568_T22_PHYREG31); + val &= ~T22_PHYREG31_SSC_MASK; + val |= T22_PHYREG31_SSC_DOWNWARD << T22_PHYREG31_SSC_DIR_SHIFT; + writel(val, priv->mmio + RK3568_T22_PHYREG31); + + /* Enable adaptive CTLE for USB3.0 Rx. */ + val = readl(priv->mmio + RK3568_T22_PHYREG14); + val |= T22_PHYREG14_CTLE_EN; + writel(val, priv->mmio + RK3568_T22_PHYREG14); + + /* Set PLL KVCO fine tuning signals. */ + val = readl(priv->mmio + RK3568_T22_PHYREG32); + val &= ~T22_PHYREG32_PLL_KVCO_MASK; + val |= T22_PHYREG32_PLL_KVCO_VALUE << T22_PHYREG32_PLL_KVCO_SHIFT; + writel(val, priv->mmio + RK3568_T22_PHYREG32); + + /* Enable controlling random jitter. */ + writel(T22_PHYREG11_PLL_LPF_ADJ, priv->mmio + RK3568_T22_PHYREG11); + + /* Set PLL input clock divider 1/2. */ + val = readl(priv->mmio + RK3568_T22_PHYREG5); + val &= ~T22_PHYREG5_PLL_DIV_MASK; + val |= T22_PHYREG5_PLL_DIV_2 << T22_PHYREG5_PLL_DIV_SHIFT; + writel(val, priv->mmio + RK3568_T22_PHYREG5); + + writel(T22_PHYREG17_PLL_LOOP, priv->mmio + RK3568_T22_PHYREG17); + writel(T22_PHYREG10_SU_TRIM_0_7, priv->mmio + RK3568_T22_PHYREG10); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_usb, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false); + rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true); + break; + case PHY_TYPE_SATA: + /* Enable adaptive CTLE for SATA Rx. */ + val = readl(priv->mmio + RK3568_T22_PHYREG14); + val |= T22_PHYREG14_CTLE_EN; + writel(val, priv->mmio + RK3568_T22_PHYREG14); + /* + * Set tx_rterm=50ohm and rx_rterm=44ohm for SATA. + * 0: 60ohm, 8: 50ohm 15: 44ohm (by step abort 1ohm) + */ + val = T22_PHYREG6_TX_RTERM_50OHM << T22_PHYREG6_TX_RTERM_SHIFT; + val |= T22_PHYREG6_RX_RTERM_44OHM << T22_PHYREG6_RX_RTERM_SHIFT; + writel(val, priv->mmio + RK3568_T22_PHYREG6); + + rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true); + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true); + break; + case PHY_TYPE_SGMII: + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->sgmii_mode_set, true); + break; + case PHY_TYPE_QSGMII: + rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_rate_sel, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true); + rockchip_combphy_param_write(priv->phy_grf, &cfg->qsgmii_mode_set, true); + break; + default: + dev_err(priv->dev, "incompatible PHY type\n"); + return -EINVAL; + } + + rate = clk_get_rate(priv->refclk); + + switch (rate) { + case REF_CLOCK_24MHz: + if (priv->mode == PHY_TYPE_USB3 || priv->mode == PHY_TYPE_SATA) { + /* Set ssc_cnt[9:0]=0101111101 & 31.5KHz. */ + val = readl(priv->mmio + RK3568_T22_PHYREG14); + val &= ~T22_PHYREG14_SSC_CNT_MASK; + val |= T22_PHYREG14_SSC_CNT_VALUE << T22_PHYREG14_SSC_CNT_SHIFT; + writel(val, priv->mmio + RK3568_T22_PHYREG14); + writel(T22_PHYREG15_SSC_CNT_VALUE, priv->mmio + RK3568_T22_PHYREG15); + } + break; + case REF_CLOCK_25MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true); + break; + case REF_CLOCK_100MHz: + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true); + if (priv->mode == PHY_TYPE_PCIE) { + /* PLL KVCO fine tuning. */ + val = readl(priv->mmio + RK3568_T22_PHYREG32); + val &= ~T22_PHYREG32_PLL_KVCO_MASK; + val |= T22_PHYREG32_PLL_KVCO_VALUE << T22_PHYREG32_PLL_KVCO_SHIFT; + writel(val, priv->mmio + RK3568_T22_PHYREG32); + + /* Enable controlling random jitter. */ + writel(T22_PHYREG11_PLL_LPF_ADJ, priv->mmio + RK3568_T22_PHYREG11); + + val = readl(priv->mmio + RK3568_T22_PHYREG5); + val &= ~T22_PHYREG5_PLL_DIV_MASK; + val |= T22_PHYREG5_PLL_DIV_2 << T22_PHYREG5_PLL_DIV_SHIFT; + writel(val, priv->mmio + RK3568_T22_PHYREG5); + + writel(T22_PHYREG17_PLL_LOOP, priv->mmio + RK3568_T22_PHYREG17); + writel(T22_PHYREG10_SU_TRIM_0_7, priv->mmio + RK3568_T22_PHYREG10); + } else if (priv->mode == PHY_TYPE_SATA) { + /* downward spread spectrum +500ppm */ + val = readl(priv->mmio + RK3568_T22_PHYREG31); + val &= ~T22_PHYREG31_SSC_MASK; + val |= T22_PHYREG31_SSC_DOWNWARD << T22_PHYREG31_SSC_DIR_SHIFT; + val |= T22_PHYREG31_SSC_OFFSET_500PPM << T22_PHYREG31_SSC_OFFSET_SHIFT; + writel(val, priv->mmio + RK3568_T22_PHYREG31); + } + break; + default: + dev_err(priv->dev, "unsupported rate: %lu\n", rate); + return -EINVAL; + } + + if (priv->ext_refclk) { + rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true); + if (priv->mode == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) { + val = readl(priv->mmio + RK3568_T22_PHYREG12); + val &= ~T22_PHYREG12_RESISTER_MASK; + val |= T22_PHYREG12_RESISTER_HIGH_Z << T22_PHYREG12_RESISTER_SHIFT; + val |= T22_PHYREG12_CKRCV_AMP0; + writel(val, priv->mmio + RK3568_T22_PHYREG12); + + val = readl(priv->mmio + RK3568_T22_PHYREG13); + val |= T22_PHYREG13_CKRCV_AMP1; + writel(val, priv->mmio + RK3568_T22_PHYREG13); + } + } + + if (priv->enable_ssc) { + val = readl(priv->mmio + RK3568_T22_PHYREG7); + val |= T22_PHYREG7_SSC_EN; + writel(val, priv->mmio + RK3568_T22_PHYREG7); + } + + return 0; +} + +static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = { + /* pipe-phy-grf */ + .pcie_mode_set = { 0x0000, 5, 0, 0x00, 0x11 }, + .usb_mode_set = { 0x0000, 5, 0, 0x00, 0x04 }, + .sgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x01 }, + .qsgmii_mode_set = { 0x0000, 5, 0, 0x00, 0x21 }, + .pipe_rxterm_set = { 0x0000, 12, 12, 0x00, 0x01 }, + .pipe_txelec_set = { 0x0004, 1, 1, 0x00, 0x01 }, + .pipe_txcomp_set = { 0x0004, 4, 4, 0x00, 0x01 }, + .pipe_clk_25m = { 0x0004, 14, 13, 0x00, 0x01 }, + .pipe_clk_100m = { 0x0004, 14, 13, 0x00, 0x02 }, + .pipe_phymode_sel = { 0x0008, 1, 1, 0x00, 0x01 }, + .pipe_rate_sel = { 0x0008, 2, 2, 0x00, 0x01 }, + .pipe_rxterm_sel = { 0x0008, 8, 8, 0x00, 0x01 }, + .pipe_txelec_sel = { 0x0008, 12, 12, 0x00, 0x01 }, + .pipe_txcomp_sel = { 0x0008, 15, 15, 0x00, 0x01 }, + .pipe_clk_ext = { 0x000c, 9, 8, 0x02, 0x01 }, + .pipe_sel_usb = { 0x000c, 14, 13, 0x00, 0x01 }, + .pipe_sel_qsgmii = { 0x000c, 15, 13, 0x00, 0x07 }, + .pipe_phy_status = { 0x0034, 6, 6, 0x01, 0x00 }, + .con0_for_pcie = { 0x0000, 15, 0, 0x00, 0x1000 }, + .con1_for_pcie = { 0x0004, 15, 0, 0x00, 0x0000 }, + .con2_for_pcie = { 0x0008, 15, 0, 0x00, 0x0101 }, + .con3_for_pcie = { 0x000c, 15, 0, 0x00, 0x0200 }, + .con0_for_sata = { 0x0000, 15, 0, 0x00, 0x0119 }, + .con1_for_sata = { 0x0004, 15, 0, 0x00, 0x0040 }, + .con2_for_sata = { 0x0008, 15, 0, 0x00, 0x80c3 }, + .con3_for_sata = { 0x000c, 15, 0, 0x00, 0x4407 }, + /* pipe-grf */ + .pipe_con0_for_sata = { 0x0000, 15, 0, 0x00, 0x2220 }, + .pipe_sgmii_mac_sel = { 0x0040, 1, 1, 0x00, 0x01 }, + .pipe_xpcs_phy_ready = { 0x0040, 2, 2, 0x00, 0x01 }, + .u3otg0_port_en = { 0x0104, 15, 0, 0x0181, 0x1100 }, + .u3otg1_port_en = { 0x0144, 15, 0, 0x0181, 0x1100 }, +}; + +static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = { + .grfcfg = &rk3568_combphy_grfcfgs, + .combphy_cfg = rk3568_combphy_cfg, +}; + +static const struct of_device_id rockchip_combphy_of_match[] = { + { + .compatible = "rockchip,rk3568-naneng-combphy", + .data = &rk3568_combphy_cfgs, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, rockchip_combphy_of_match); + +static struct platform_driver rockchip_combphy_driver = { + .probe = rockchip_combphy_probe, + .driver = { + .name = "rockchip-naneng-combphy", + .of_match_table = rockchip_combphy_of_match, + }, +}; +module_platform_driver(rockchip_combphy_driver); + +MODULE_DESCRIPTION("Rockchip NANENG COMBPHY driver"); +MODULE_LICENSE("GPL v2");