| Message ID | 20211215152712.72502-1-david@ixit.cz (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: display: bridge: document Toshiba TC358768 cells and panel node | expand |
15.12.2021 18:27, David Heidelberg пишет: > Properties #address-cells and #size-cells are valid. > The bridge node can also contains panel node. > > Signed-off-by: David Heidelberg <david@ixit.cz> > --- > .../bindings/display/bridge/toshiba,tc358768.yaml | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml > index eacfe7165083..3186d9dffd98 100644 > --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml > @@ -69,6 +69,16 @@ properties: > - port@0 > - port@1 > > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > +patternProperties: > + "^panel@[0-3]$": > + $ref: ../panel/panel-common.yaml The panel is always fixed to port 1, isn't it? Shouldn't it be just port@1 here?
On Wed, 15 Dec 2021 16:27:12 +0100, David Heidelberg wrote: > Properties #address-cells and #size-cells are valid. > The bridge node can also contains panel node. > > Signed-off-by: David Heidelberg <david@ixit.cz> > --- > .../bindings/display/bridge/toshiba,tc358768.yaml | 10 ++++++++++ > 1 file changed, 10 insertions(+) > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/1568330 tc358778@e: compatible: Additional items are not allowed ('toshiba,tc358768' was unexpected) arch/arm/boot/dts/am571x-idk.dt.yaml arch/arm/boot/dts/am572x-idk.dt.yaml arch/arm/boot/dts/am574x-idk.dt.yaml tc358778@e: compatible: ['toshiba,tc358778', 'toshiba,tc358768'] is too long arch/arm/boot/dts/am571x-idk.dt.yaml arch/arm/boot/dts/am572x-idk.dt.yaml arch/arm/boot/dts/am574x-idk.dt.yaml
On Wed, Dec 15, 2021 at 9:38 AM David Heidelberg <david@ixit.cz> wrote: > > Properties #address-cells and #size-cells are valid. > The bridge node can also contains panel node. > > Signed-off-by: David Heidelberg <david@ixit.cz> > --- > .../bindings/display/bridge/toshiba,tc358768.yaml | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml > index eacfe7165083..3186d9dffd98 100644 > --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml > @@ -69,6 +69,16 @@ properties: > - port@0 > - port@1 > > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > +patternProperties: > + "^panel@[0-3]$": > + $ref: ../panel/panel-common.yaml It's possible to attach something that doesn't use panel-common.yaml and if it did, it would be applied by that schema. What you need is to just reference dsi-controller.yaml at the top level. Rob
16.12.2021 18:13, Rob Herring пишет: > On Wed, Dec 15, 2021 at 9:38 AM David Heidelberg <david@ixit.cz> wrote: >> >> Properties #address-cells and #size-cells are valid. >> The bridge node can also contains panel node. >> >> Signed-off-by: David Heidelberg <david@ixit.cz> >> --- >> .../bindings/display/bridge/toshiba,tc358768.yaml | 10 ++++++++++ >> 1 file changed, 10 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml >> index eacfe7165083..3186d9dffd98 100644 >> --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml >> +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml >> @@ -69,6 +69,16 @@ properties: >> - port@0 >> - port@1 >> >> + '#address-cells': >> + const: 1 >> + >> + '#size-cells': >> + const: 0 >> + >> +patternProperties: >> + "^panel@[0-3]$": >> + $ref: ../panel/panel-common.yaml > > It's possible to attach something that doesn't use panel-common.yaml > and if it did, it would be applied by that schema. > > What you need is to just reference dsi-controller.yaml at the top level. It works, thank you. Then we will also need to rename the "dsi-bridge" node to just "dsi" in the new ASUS TF700T device-tree since dsi-controller.yaml wants that name.
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml index eacfe7165083..3186d9dffd98 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml @@ -69,6 +69,16 @@ properties: - port@0 - port@1 + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^panel@[0-3]$": + $ref: ../panel/panel-common.yaml + required: - compatible - reg
Properties #address-cells and #size-cells are valid. The bridge node can also contains panel node. Signed-off-by: David Heidelberg <david@ixit.cz> --- .../bindings/display/bridge/toshiba,tc358768.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+)